Repair and scheduled maintenance of 40KVA DG set installed at IFC complex Jammu and 5KVA DG set installed at Divisional office MICD Jammu along with allied works

Amount

Servicing the engine of 40KVA DG set installed at I&FC complex Jammu by way of draining out of old burnt oil from the engine sump, cleaning of engine sump and engine parts with flushing oil and cleaning the engine completely. Providing and Filling of new lubrication engine oil approximately 10 litres in the sump along with draining of old coolant from cooltant tank and providing/refilling of 3 litres coolant in the tank. P/F of new fuel filter-one set in place of old choked filters (primary & secondary) and M. oil filter with providing & replacement of fuel pipe, banjo bolts and washers of the fuel filter and fuel injector pump. P/F of new air filter in place of old choked air filter along with cleaning, servicing of intake and exhaust manifold. Job includes cost of material, labour charges, transportation charges, hire charges of tools & tackles and fitment charges inclusive all taxes as applicable. Complete job.

Servicing the engine of 5KVA DG set installed at Divisional office MICD Jammu by way of draining out of old burnt oil from the engine sump, cleaning of engine sump and engine parts with flushing oil and cleaning the engine completely. Providing and Filling of new lubrication engine oil approximately 5 litres in the sump. P/F of new fuel filter-one set in place of old choked filters (primary & secondary) and M. oil filter with providing & replacement of fuel pipe, banjo bolts and washers of the fuel filter and fuel injector pump. P/F of new air filter in place of old choked air filter along with cleaning, servicing of intake and exhaust manifold. Job further includes P/F of new 63A changeover switch of reputed make in place of damaged changeover on the wall of the DG set room and making connections properly with the incoming outgoing and DG set along with thimbles, nuts, bolts, washers and insulation complete and checking its operation. Job further includes repairs to damaged 0.5HP single phase motor installed at the MICD office for lifting of water to tank at the roof by way of removing the electrical connections and dismantling of motor from the pipe line. Shifting of the motor to workshop in mechanical transport vehicle. Repairs to 0.5HP mono block pump motor set at workshop by unscrewing of nuts/bolts and then extraction of rotor from the stator, extracting out old damaged/burnt copper winding from the stator, cleaning the slots with appropriate chemical along with stator, complete rewinding of the stator with new copper winding of requisite guage and specifications along with insulation, varnishing the stator winding with superior quality varnish, drying the stator winding, P/F of 2Nos. bearings 6201 to both DE & NDE, reassembling the motor after greasing properly and checking its continuity. Shifting the repaired motor back to the office, its installation and making all the electrical connections properly and checking for its smooth operation first at no load and then on full load Job includes cost of material, labour, transportation charges, hire charges of tools & tackles and fitment charges inclusive all taxes as applicable. Complete job.

NATIONAL ELECTRO-MECH COMPANY

M/S FASTTRACK ENGINEERS