Shifting of 11 KV overhead/LT Overhead, DT Pole installation and other works etc. due to road expansion from Brahamand Ghat to Raskhan Samadhi in the area of EDD-Laxminagar, Mathura under Deposit Scheme on semi turnkey basis

Amount

Supply of following material as per RESPO Drawings/standard technical specifications.

HT Tee Connection with X-Mains/Sub station with (Tee Channel)

Cross Arms Holding Clamps with Nut& Bolt

Joint Kit 3*185 sq mm XLPE 11 kv

F-bracket for fixing top insulator Nut&Bolts

Guarding Angle

Stay Set Complete

Pole Earthing Complete

G.I. Wire No. 6 SWG for Guarding

Stone Pad

M.S. Top Channel (100x50x2240 mm)

CROSS BRACING ANGLE SET

CLAMP FOR X- BRACING

barbed wire

Danger Board

P G CLAMP

Number plate with clamp N/B

GI Wire chain Link Net for Fencing mesh D Fence Wire with Foldable

Double through double pole 11 kv TPMO

11 kv TPMO

Copper L Piece 50x50x6 MM

Pipe Earthing Pannel Neutral & TF Neutrul & Body

Chemical Earthing Pannel body & Fencing

11 Kv D.O. Fuse Set

3 phase 11 Kv D.O. Fuse Set heavy duty

LT Protection pannel with 3 Nos of ckt. By stud type tell less fuse unit . Compatable for installation of MCCB 1000

LT PVC Cable 1x400 sq mm Single core

All Lugs 400 sq mm

Dropper Channel

Tail less unit Complete with Structure

LT PVC Cable 1x240 sq mm

Alluminium Lug 240 Sq mm

LT XLPE CABLE 3.5X400 SQ MM

ABC (3x120+1x16) sq mm

ABC (3x95+1x70+1x16) sq mm

ABC (3x50+1x35+1x16) sq mm

XLPE 120*1 SQ MM SINGAL Core

LT Distrution Box For ABC Cable (3-Phase)

D B Clamp

Dead End Clamp with Eye Bolt For PCC

I Hook for ABC

Piercing connector of size 120/95/50 sq mm

LTD Cable 1.35 Sq mm for conneting Distribution Box

LT Shahckle Insulator

Suspention Clamp

Nut & Bolt and washer

Interlocking of base in transformer area

Clamp angle for panel mounting support

ACSR Weasal Conductor Insulated

Erection,installation and commissioning of 11 KV 3ø overhead lines by completeing following works/jobs as per RESPO Drawings/Estimate with centralized and decentralized materials.Work Includes all cartage, carriage, T&P, raw materials and any other material/work which is required for completion of said work but not mentioned in this boq/Estimate.

Erection of ST Pole 11 Mtr long with all accessories.

Laying of 11 KV XLPE CABLE 3X185 SQ MM on overhead line with making loop, connections etc.

Fixing of Joint Kit 3*185 sq mm XLPE 11 kv

Laying of Dog Conductor on ST Poles

Stay Set Complete

Pole earthing by earthing rod

Guarding of 11 KV line (having span 30 to 50 Mtr.)

CONCRETING OF ST POLES

Centralized/decentralized materials mentioned below :-

HT Tee Connection with X-Mains/Sub station with (Tee Channel)

STP Pole 11 Mtr. Stud type

11 KV "V" tyoe cross arm 65x65x6 mm, M S Angle

Cross Arms Holding Clamps with Nut& Bolt

11 KV XLPE CABLE 3X185 SQ MM XLPE 11 kv 8400*2+5% Loop

Joint Kit 3*185 sq mm XLPE 11 kv

11 kv pin insulator WITH GI PIN

11 kv Disc Insulator with fitting

F-bracket for fixing top insulator Nut&Bolts

Guarding Angle

Dog conductor 3000*3+3 % sag

Stay Set Complete

Pole Earthing Complete

G.I. Wire No. 6 SWG for Guarding

Erection,installation and commissioning of Double pole structure for overhead line by completeing following works/jobs as per RESPO Drawings/Estimate with centralized and decentralized materials.Work Includes all cartage, carriage, T&P, raw materials and any other material/work which is required for completion of said work but not mentioned in this boq/Estimate.

Erection of Double pole structure of STP with all accessories.

CONCREATING OF SUPPORT WITH ALL RAW MATERIAL, LABOUR ETC.

EARTHING COMPLETE by MS Earth rod

COMPLETE STAY

CONCREATING OF STAY WITH ALL RAW MATERIAL, LABOUR ETC.

Centralized/decentralized materials mentioned below :-

STP Pole 11 Mtr. Stud type

11 kv pin insulator WITH GI PIN

11 kv Disc Insulator with fitting

F-bracket for fixing top insulator Nut&Bolts

Stay Set Complete

Pole Earthing Complete

Stone Pad

M.S. Top Channel (100x50x2240 mm)

CROSS BRACING ANGLE SET

CLAMP FOR X- BRACING

barbed wire

Danger Board

P G CLAMP

Number plate with clamp N/B

Shifting work of DT (25/63/100 KVA) by completing following works or jobs as per RESPO Drawings/Estimate with centralized and decentralized materials.Work Includes all cartage, carriage, T&P, raw materials and any other material/work which is required for completion of said work but not mentioned in this boq/Estimate.

Erection of Double pole structure of STP with all accessories & painting etc.

CONCREATING OF SUPPORT WITH ALL RAW MATERIAL, LABOUR ETC.

EARTHING COMPLETE by MS Earth rod

COMPLETE STAY

CONCREATING OF STAY WITH ALL RAW MATERIAL, LABOUR ETC.

Laying/Erection of ACSR Weasal Conductor Insulated

Installation of Tail less unit Complete

Laying/Erection of LT PVC Cable 1x240 sq mm

Neutral/Body Earthing of distribution transformers. It includes digging of pit upto water level depth and then inserting 32 mm dia GI pipe of “B” grade, confirming to the requirement of IS specification and then connecting the top of the inserted pipe by MS flat of size 50x3.3 mm or appropiate size with the help of nut and bolt or through welding, as per direction of Supervising Engineer. It includes the cost of all material, labour, T & P cartage etc. required for proper completion of work.The aforesaid work shall be carried out as per RESSPO norms..

Making of POLE PLINTH with all materials

Mounting of 25/63/100 KVA Transformer on the double pole structures and connections thereof.

Centralized/decentralized materials mentioned below :-

STP Pole 11 Mtr. SP 55

11 kv pin insulator WITH GI PIN

Stay Set Complete

Pole Earthing Complete

Stone Pad

M.S. Top Channel (100x50x2240 mm)

Danger Board

11 kv TPMO

11 Kv D.O. Fuse Set

ACSR Weasal Conductor Insulated

Dropper Channel

Tail less unit Complete with Structure

LT PVC Cable 1x240 sq mm

Alluminium Lug 240 Sq mm

25/63/100 KVA T/F

Shifting work of DT (250/400 KVA) by completing following works or jobs as per RESPO Drawings/Estimate with centralized and decentralized materials.Work Includes all cartage, carriage, T&P, raw materials and any other material/work which is required for completion of said work but not mentioned in this boq/Estimate.

Erection of Double pole structure of STP with all accessories

CONCREATING OF SUPPORT WITH ALL RAW MATERIAL, LABOUR ETC.

COMPLETE STAY

CONCREATING OF STAY WITH ALL RAW MATERIAL, LABOUR ETC.

Making of POLE PLINTH with all materials

Constructions of transformer plinth of size 5.5x5.5x6 feet, with the help of first class brick and masonary in the ratio 1:4 cement & sand coarse. Filling the structure completely as per norms with RCC top 1:2:4 cement, sand coarse and stone grit with MS Bar and MS channel for resting transformer wheel (100x50x1650mm) and plaster. All material shall be provided by the contractor. Old good conditioned bricks, stronegrit and MS bar/MS channel etc will be used after approval of Supervisory Engineer to lower the cost of work. Work includes Removal of T/F from old plinth and re-energize the T/F on earth safely till new plinth construction. Then after remounting the T/F on newly constructed plinth and making all connections to energize the T/F.

Installation & commissioning of LT INCOMING PANEL WITH METERING EQ

Laying of LT XLPE CABLE 3.5X400 SQ MM

Mounting of 250/400 KVA Transformer on the Plinth structures and connections thereof.

Centralized/decentralized materials mentioned below :-

STP Pole 11 Mtr. SP 55

11 kv pin insulator WITH GI PIN

Stay Set Complete

Stone Pad

M.S. Top Channel (100x50x2240 mm)

11 kv TPMO

11 Kv D.O. Fuse Set

Dropper Channel

LT INCOMING PANEL WITH METERING EQ

LT XLPE CABLE 3.5X400 SQ MM

250/400 KVA T/F

LT PROTECTION OF DT by completeing following works/jobs as per RESPO Drawings/Estimate with centralized and decentralized materials.Work Includes all cartage, carriage, T&P, raw materials and any other material/work which is required for completion of said work but not mentioned in this boq/Estimate.

Pole Earthing Complete

Danger Board

Number plate with clamp N/B

GI Wire chain Link Net for Fencing mesh D Fence Wire with Foldable

Double through double pole 11 kv TPMO

Copper L Piece 50x50x6 MM

Pipe Earthing Pannel Neutral & TF Neutrul & Body

Chemical Earthing Pannel body & Fencing

3 phase 11 Kv D.O. Fuse Set heavy duty

ACSR Weasal Conductor Insulated

LT Protection pannel with 3 Nos of ckt. By stud type tell less fuse unit . Compatable for installation of MCCB 1000

LT PVC Cable 1x400 sq mm Single core

All Lugs 400 sq mm

Nut & Bolt and washer

Foundation of LT Protection pannel 30 cm Hieght.

PAINTING OF POLE

Interlocking of base in transformer area

Toe Wall for Fencing

Granular sub base for laying of interlocking bricks

Clamp angle for panel mounting support

Erection,installation and commissioning of LT 3ø overhead lines by completeing following works/jobs as per RESPO Drawings/Estimate with centralized and decentralized materials.Work Includes all cartage, carriage, T&P, raw materials and any other material/work which is required for completion of said work but not mentioned in this boq/Estimate.

Erection of PCC Pole 8.5 Mtr. Long with all accessories.

Erection of ST Pole 9 Mtr long with all accessories.

Laying of XLPE 120*1 SQ MM SINGAL Core on overhead line with making loop, connections etc.

Laying of ABC (3x120+1x16) sq mm Cable

Laying of ABC (3x95+1x70+1x16) sq mm Cable

Laying of ABC (3x50+1x35+1x16) sq mm Cable

Installation of LT Distrution Box For ABC Cable (3-Phase) with all connections & commissioning.

Stay Set Complete

EARTHING COMPLETE by MS Earth rod

CONCREATING OF SUPPORT WITH ALL RAW MATERIAL, LABOUR ETC.

Centralized/decentralized materials mentioned below :-

Stay Set Complete

Pole Earthing Complete

ABC (3x120+1x16) sq mm

ABC (3x95+1x70+1x16) sq mm

ABC (3x50+1x35+1x16) sq mm

XLPE 120*1 SQ MM SINGAL 1500 M

LT Distrution Box For ABC Cable (3-Phase)

D B Clamp

Dead End Clamp with Eye Bolt For PCC

I Hook for ABC

Piercing connector of size 120/95/50 sq mm

LTD Cable 1.35 Sq mm for conneting Distribution Box

PCC Poles 8.5 Mtr. Long

STP Poles 9 Mtr. Long

LT Shahckle Insulator

Suspention Clamp

Nut & Bolt and washer

Dismentling of previous 11 KV/LT Line material, TF double poles, DT etc. against above shifting works etc. and safely shifting of balance material to JE store/ store centre.

Fabrico India Pvt. Ltd, (BID ID -5274118)