Supply of Machine, Equipment and others

List of Machine and Equipments

Laproscopic HD Camera Brand - Karl Storz/ConMed/Olympus Technical Specification Resolution: 1920x1200 Pixes / 1900x1000 pixes Cable Length: 300 cm

Ultrasonic Harmonic Scalpel Brand - Johnson Technical Specification Dimensions: (HxWxd) 5.3" 14.5"x15.2" Voltage: 100-240 VAC Frequency: 50/60 Hz Rated Current: 3 Amp

Ultrasonic Harmonic Scalpel Brand - Valley Lab Technical Specification Macrobipolar/Bipolar: 473 kHz sinusoid, 100% duty cycle. Seal: 473 kHz sinusoid Pulsed

Hand Instruments for Laproscopy Brand- Karl Storz/ Olympus Technical Specification i) Veress needle: It should be with spring action blunt style -12 cm: 1 no 10 cm: 1 no 8 cm: 1 no ii) Trocar and cannula: 10 mm: 2 nos 7 mm: 1 no. 5 mm 6 nos It should consists of trocar, cannula with insufflation and multifunctional valve and must have pyramidal tip. iii) Reducer/reduction sleeve 5 mm. 1 no iv) Telescopes: 10 mm- 0˚- 1 nos -30ₒ - 1 nos 5 mm-30ₒ 1 nos Rigid rod lens system provides good resolution and the better dept perception. It should have uniform image brightness and autoclavable. The 300 forward oblique angle and permits for greater latitude for viewing underlying areas under difficult anatomical conditions. v) Suction Cannula: 10 mm - 1 no 5 mm -1 nos vi) Laparoscopic scissors: Curved (Monopolar Metzenbaum dissector 5mm diameter): 1 nos Straight (Bipolar): 1 nosPeritoneal scissor: 1 nosvii) Unipolar forceps (Hook & spatula): 2 nos viii) Bipolar forceps : 2 nos ix) Atraumatic forceps: Maryland Dissector forceps: : 2 nos. Fenestrated forceps: : 2 nos. x) Needle Holder (flat jaw) with handle : 2nos xi) Monopolar cable (reusable):1 nos. xii) Bipolar cable (reusable): 1 nos xiii) Allis (double row of teeth) grasper: 1 nos xiv) Aspiration needle: 1 nos. xv) Reducer/ Reduction sleeve (5mm): 1 nos xvi) Grasping forceps (toothed & rachet 5mm): 2 nos xvii) Laparoscopic knot pusher: 1 nos xviii) Clip applicator (reusable): 5mm -: 1 nos : 10 mm: Ino xix) Uterine Manipulator: 1 nos xx) Clips( medium & large) xxi) Drilling needle: 1 nos xxii) Infiltration needle: 1 nos xxiii) Biopsy forceps (toothed punch biopsy): 1 nos xxiv) Myoma fixation screw: 2 nos xxv) Tissue morcellator with base unit & accessories: 1 nos

Dual Wavelenght Laser Brand- Zeiss Technical Specification Laser type: Diode, Semiconductor Wavelength : 1470nm+635nm Max Power: 15 watts/1470nm+5mv/635 Aiming beam : 635nm/1, 4Mw max or 515nm/2, 5mW max Operation Mode : Continuous or Modulated Pulsed Time : 0.05ms-1000ms Beam Delivery : SMA905 connector Optic Fiber Compatible : Optic fibers having a core from 200um to 1000um, NA=0.22~0.48 Beam Emission Initiation : Footswitch Controller :Microprocessor Display : 10.1" IPS with touch panel Medical approved Cooling : Internal, air and thermoelectric cooling Power supply of the laser: DC 24V/8.33A from the separate AC Power supply of AC adapter : Single phase 100-240VA; 50-60HZ, Max 90w AC Adapter DC 24V/8.33A Medical approved Laser Dimensions: 27cm*24,5cm x 9cm Laser weight: 2.75kg Laser case dimensions : 53cm x 38cm x 23cm Weight of laser with cases : 9kg Environmental conditions during work : From +10 to 24°C degree, relative humidity from 30% up to 60% Cass of Medical Device IIB Laser safety Class 4 Electric Safety Class I type B Housing Protection Degree Ip20b

HD Camera Set Brand- Karl Storz/ Olympus Technical Specification (i) HOPKINSA® Forward-Oblique Telescope 30A, diameter 4 mm, length 30 cm, a utoclavable, fiber optic light transmission incorporated, color code ed : 1 Nos (ii) TELECAM C3 : 1 Nos (iii) IMAGE1 ST™ HX ONE-CHIP FULL HD CAMERA HEAD, 50/60 HZ, FIXED FOCUS, PROG RESSIVE SCAN, SOAKABLE, GAS-AND PLASMASTERILIZABLE, FOCAL LENGTH F = 16 MM, 2 FREELY PROGRAMMABLE CAMERA HEAD BUTTONS, FOR USE WITH IMAGE1 X-LINK TC301, TELE PACK + AND TP101 : 1 Nos (iv) MEDICAL GRADE SURGICAL MONITOR - FHD : 1Nos (v) COLD LIGHT FOUNTAIN POWER LED 175 SCB, WITH INTEGRATED KARL STORZ-SCB, HIGH-PERFORMANCE LED AND ONE KARL STORZ LIGHT OUTLET, POWER SUPPLY 11-240 VAC, 50/60 HZ INCLUDING: 400 A MAINS CORD 20090170 SCB CONNECTI G CABLE : 1Nos (vi) FIBER OPTIC LIGHT CABLE, WITH STRAIGHT CONNECTOR, EXTREMELY HEAT-RESI STANT, WITH SAFETY LOCK, DIAMETER 4. 8 MM, LENGTH 250 CM :1 Nos

T U R P Set Brand- Olympus Technical Specification (1) Cystoscope-Urethroscope Sheath, 22 Fr : 1 Nos (2) Telescope Bridge, with 1 lockable channel, for use with Cystoscope Sheaths : 1Nos (3) Working Element, E 1 Working Element (also for use with optical urethrotome) 2 Cutting Loops 2 Coagulat ng Electrodes 2 High Frequency Cords 1 Protection Tube . The thumb support is movable. In rest position th electrode is inside the sheath. : 1 Nos (4) Resectoscope Sheath, 26 Fr, 1 Nos (5) SCHMIEDT Visual Obturator, : 1 Nos (6) Cutting Loop angled, 24/26 Fr., units of 6 : 1Nos ELLIK Evacuator : 1 Nos (7) Urethrotome Sheath, 21 Fr. Urethrotome Sheath and 2 LUER-Lock cones. : 1 Nos (8) Obturator, for urethrotome sheath, 21 Fr. 1 Nos SACHSE Cold Knife, straight, not to be used with HF current This artic le is only available in units of 6 : 1 Nos

FLEXIBLE CYSTOSCOPE Brand- Olympus Technical Specification CYSTO-URETHRO-FIBERSCOPE, WITH CONTRAPOSITIVE DEFLECTION MECHANISM, DE FLECTION OF DISTAL TIP 210°/140", DIRECTION OF VIEW 0°, ANGLE OF VIEW 10", WORKING CHANNEL INNER DIAMETER 7 FR., SHEATH SIZE 15.5 FR., WORKI G LENGTH 37 СМ, CONSISTING OF: 11272 CU1 CYSTOURETHRO-FIBERSCOPE 2767 A CASE 27023 FE GRASPING FORCEPS 27023 ZE BIOPSY FORCEPS 13242 XL LEA AGE TESTER 11025 E PRESSURE COMPENSATION CAP 27651 B CLEANING BRUSH 27 14 Y LUERADAPTOR

Echocardiography Brand- GE Healthcare / Philips / SIEMENS Healthcare/BPL Technical Specification a) 2D, M-mode, Colour M-Mode b) Colour Flow Doppler Imaging c) Fully Steerable Pulsed Doppler d) Fully Steerabie Continuous Wave Recall e) Digital cine replay of all imaging and Doppler modalities. f) On screen Cine Storage & Image recall g) Digital Image Storage and Patient Archive with true scanner frame rates. h) Full measurement and analysis capabilities. Both on line and offline preferable. i) Imaging frequencies from 1 MHZ to 15 MHZ J) Review of stored ultrasound Images. k) User adjustable B Colorization maps, gain settings, colour Doppler baseline, angle correction and other important parameters with live/frozen/archived images/loops.

12 Lead ECG Machine (Brand - BPL/Maestros) Technical Specification Electrocardiograph should have capability of recording 12-lead ECG and should have the following features: 1. Should have simultaneous acquisition of 12 Leads 2. Should have a display to preview the ECG waveform before printing 3. Should have 7 inch or more display with high resolution screen 4. Should be compact, portable and easy to operate 5. Should have keyboard for manual entry of patient data 6. Should have provision for providing Hospital Name on the printed record7. Should work on Li-ion battery8. Should have a frequency response of 0.01-300 Hz 9. Should have sampling frequency of 15,000 Hz or more10. The device should weigh less than 5.5 kgs with battery11. Should have a special arrhythmia triggered mode of printing12. Should have Pacemaker detection facility 13. Should be able to record on different modes of sensitivity: 2.5,5,10,20 mm/mV & AGC14. Should have different recording speeds: 5, 10, 12.5, 25 and 50 mm/sec15. Should have different filters available for smoothing of waveform16. Should have AC Filter, EMG Filter: 25 or 35 or 45 Hz or OFF17. Should have Anti-Drift Filter18. Should have different print formats: 3/6/12, 3x4 with rhythm leads, 6x2, 12x119. Should have a large storage of 700 ECGS or more20. In case of error in lead connections, the machine should display the change in color of particular lead.21. Should be able transfer data directly in PDF format to USB22. Should be able to printout records on thermal paper as well Z-Fold23. Should have facility of printing in automatic/ manual/ rhythm/ R-R mode of printing24. Should have facility for interpretations and measurements25. Should provide detailed printout of patient data26. Should have paper of minimum width of 210mm27. Should have the capability to generate any number of ECG Copies for distribution28. Should be able to connect to PC 29. Should be able to operate to a maximum of 4 Hours on a newly charged battery30. Should have direct external printer connectivity31. The unit should be portable and should be able to carry with help of a handle.32. The product should be CE certified33. The manufacturer should be ISO certified34. The device should be provided with standard accessories:a) ECG Cable (Adult)-1 Nob) Gel Bottle- 1 Noc) Chest Electrodes (Set of 6)- 1 Nod) Limb Electrodes (Set of 4)- 1 Noe) Z-fold Paper - 1 packf) User Manual-1 No

BP Machine Brand - PAGODA/ OMRON/ Platinium/ DR Trust/BPL Technical Specification Should be able to measure blood pressure and pulse rate in adult as well as pediatric patients. Should be based on oscillometric measurement technology, using dynamic linear deflation method. Should have backlight LCD display with easy to view readings in dim light. Pressuremeasurement range should be 60 to 250mm Hg systolic, and 40 to 200mm Hg diastolic. Pressure display accuracy of +/- 3 to 5 mm Hg Pulse rate measurement range of 40 to 200 per minute Pulse measurement accuracy of within 5% Should include AC adapter (input range 100-240V and output voltage DC 6V), preferably with rechargeable battery (3.6V to 4.8V, 1900 to 2400mAh) cuff (22 to 32 cm size) Should be supplied with standard adult size Single button operation for start and stop functions with auto-inflation of blood pressure cuff.

Projector with Screen Brand - EPSON / BENQ / LG Cinebeam Technical Specification CE Marked, Power Supply: 220-240 V AC, 50/60 Hz, Transparent LCD Panel display system, Minimum 5200 hours lamp life, Min. 5800 Lumens brightness, contrast ration 10000: 1, aspect ratio 16: 10, resolution XGA (1024 x 786) with HDMI and VGA in, LAN & USB Support, wireless Support, Light Weight, Remote Control etc.

Phaco Emulsifier Machine Brand-Alcon LEGION / ZEISS Technical Specification 1. Operating frequency should be approx. 40 Khz 2. Handpiece: Ultralight Ultrasound 4 crystal piezoelectric hand piece. 3. US modes: Continuous, Pulse, Single Burst, multi burst, continuous burst, Automated Programmable Modulation (APM) 4. Automated Ultrasound Power on Demand: Ultrasound management technology that automatically (de)activates ultrasound US delivered only when needed EPT Up to 50% less & better followability. 5. Type of Infusion: IOP controlled, synchronized fluid exchange system that directly measures and simultaneously controls both infusion and aspiration volumes in real-time. It actively compensates for incision leakage. Quattro controlled forced infusion. 6. Display: 24 Inches Touch screen. 7. IOP Range: 30-120 mmHg 8. Vacuum range 0 to 700 mmHg 9. Aspiration flow rate 0 to 120 cc/min 10. Aspiration control modes: Vacuum controlled mode, flow control mode 11. Chamber stability: Irrespective of type of cataract, surgical conditions, leakage (0 -12 ml/min) It keep chamber stable & maintain targeted IOP throughout procedure. 12. IOP recovery time after occlusion break 200-250ms for vacuum in range of 200 -600mmHg. 13. U/S Tips: Coaxial Phaco with Incision size 2.2 mm 14. Vitrectomy: Pneumatic cutting device 15. Type of Vitrectomy Cutter: 23G Anterior Vitrectomy cutter 16. Anterior Vitrectomy Range: cut rate 30 to 5000 cuts per minute. 17. Actuation medium for Vitrectomy: Compressed air from internal source 18. Diathermy: Bipolar with fixed and Linear control via foot pedal. 19. Type of Diathermy Handpiece: Diathermy forceps and diathermy pencil eraser. 20. Instrument Tray Arm Length: Should be 800mm or more. 21. Dual linear footswitch 22. Should be USFDA and CE Approved 23. Online UPS should be provided Accessories: Phaco hand piece(coaxial) - 2 Coaxial handpiece tip I – 2 I/A Bi Manual hand piece – 2Phaco Tip (2.2 mm) - 10 Phaco Sleeve (SILICONE) (2.2mm) – 10 Test Charnber- 10 Tubing and Cassettes (disposable) – 100 Diathermy Cable with forceps – 2 Phaco Wrench-2 Vit Cutter- 23 G; single use – 6Sterilization Container/ Tray

Autorefractometer & Keratometer (ARK) Brand-ZEISS- VISUREF 150 Technical Specification (A)Device data. (a) Refraction (1) Sphere -25.00D to +22.00D (in steps of 0.12D/0.25D) (II) Axix 0 to 180*) (B) Keratometer (a) Corneal Curvature 5.00 To 10.20mm (in steps of 0.01mm) (b)Corneal redraction-33.000 Το 67.50D (in steps of 0.12D/0.25D) (c) Corneal Astigment-0.00D to-15.00D50D (in steps of 0.12D/0.25D) (d)Axis 0 to 180* (in seps of 1*) (e) Corneal diameter (2.00 to 1200mm (in steps of 0.10mm)

Humphrey fied Analyzer ( HFA3) Brand-ZEISS Technical Specification • High quality Goldman standard automated full field Perimetry of International Standard with bowl size radius = 30cm. • Computer & Monitor should be integrated in the perimeter (No external computer). • Stimulus size I, II, III, IV & V.• Background illumination 31.5Asb.• Maximum temporal range 80Deg.Suitable for central 30, neurological tests as well as full field testing. • Central field test patterns 30-2, 24-2,10-2, Macula.• Peripheral field test pattern 60-4, Nasal Step, custom test. • Threshold test strategies full threshold, SITA standard, SITA Fast , Full threshold, Fast Pack, SITA - SWAP.• Screening field test P-60, FF-80, FF-120, FF-240,Nasal Step for periphery .• Screening test strategies Two zone, Three Zone and Quantify Defects.• Glaucoma hemi field test, Heijl –Krakau blind spot monitor• Video eye monitoring, Gaze Tracking monitoring system, .. Vertex Monitoring and Head Tracking. • Touch screen on CRT Monitor, Keyboard & provision of external monitor & Keyboard.• Internal hard disk drive.• Stimulation duration 200ms, wavelength Broad band visible light• Stimulus/Background colour White on White.• SWAP (Blue on Yellow) perimetery. • Auto Pupil Measurement. • Kinetic testing & Custom Kinatic testing. • Motorised chinrest, Motorised table, Laser Jet Printer • Glaucoma Progression Analysis ( GPA ) Software for Monitoring disease progression. With visit wise graph & Visual Field Index (VFI).• RelEye monitor.• Forum Software for Archiving & Offline analysis of patient data & GPA analysis etc.• HFA DICOM Gateway.

LASER DCR Brand-Medfin Technical Specification Applications dacryocystorhinostomy Amplifying medium diode Ergonomics tabletop Wavelength-980nm Average power -8W Weight -1.2Kg (2.65lb)

Automatic Tourniquet System with Hose cuffs Brand - Zimmer Biomet (Model ATS-5000) Number of Ports Dual Port Number of Potential Cuffs Dual Cuff Dual Cuff Mounting Options Table or Pole Mount Table or Pole Mount Battery Type and Life Lithium Ion 6 hrs Lithium Ion 6 hrs User Interface Touchscreen Touchscreen International Alarm Standard 60601-1-8 Compliant Compliant Display 10.1” Color 7.0" Color Minimum/Maximum Pressure 20/600 mmHg 50/600 mmHg Pressure Accuracy ±3 mmHg (20–600 mmHg) ±4 mmHg (50-600 mmHg) Limb Occlusion Pressure (LOP) Allows for patient specific pressure, which allows for the minimum pressureto be used.Yes NoLine Occlusion Detection (Acoustic Reflectometry)A kinked pneumatic tube can prevent an inflated cuff from deflating, resulting in unintentional tourniquet pressure. This alarm alerts OR staff that there is an occlusion in the line to the cuff.Yes

Battery Opreated Heavy Duty Drill & Saw Brand -ManMan/Biotech Specifications--- Drill and Reamer Hand piece Attachments, Oscillating/S Reciprocating Saw hand Piece Charger and sterilization HANDPIECE FOR DRILLING & REAMING Trigger Type Single Modes available - Reverse & Forward Mode Drill Speed 1000 rpm approxDrill Torque 4 Nm (35+ in lbs) Ream Torque 16.5 Nm (145+ in. lbs) Weight of HP with Batteries 1250 Gms DRILLING AND REAMING ATTACHMENTS Hudson/Zimmer/Trinkle reamer attachment - Yes AO reamer attachment - Yes AO type drill attachment with quick coupling - Yes Jacobs Chuck with minimum 6 mm - Yes Keyless chuck -Yes Wire driver attachment - Yes Pin driver attachment - Yes DHS reamer attachment with quick coupling - Yes OSCILLATING/SAGITAL SAW HAND PIECE Ergonomic pistol grip design for maximum comfort and control Yes Weight of HP with Batteries.- 1350 Gms Saw Speed - 15000+ cpm Cutting Arc - Between 4 to 5 degree Noise level - 60-85 Dbl Special blades each for TKR and THR (Nos) - 10 BATTERY SPECIFICATIONS Type of Battery Lithium Ion (Li-ion) Number of batteries 2

Arthroscopy Set (Brand- Smith +Nephew / Karl Storz) Arthroscopy Set 30° (Arthroscopic, Sheath and Obturator) Wide Angle, Direct View 4K High Definition Arthroscope. Light Guide insertion on Definitione direction view with a J-lock fixation for cannula. Working Length of Not more than 160mm Optimal centre-to-edge resolution for enhanced picture quality Angle of view: 30 degree Diameter: 4mm Arthroscopies should be supplied with compatible cannulas high flow, double valve, fully rotatable with fenestrated tip & conical and blunt tip obturator, Sheath- 5.95 to 6.0mm, high flow diagnostic cannula, double valve, fully rotatable cannula with fenestrated tip. Trocar-4.5mm conical obturator to fit with cannula. Arthroscopy Set 70° (Arthroscopic, Sheath and Obturator) Wide Angle, Direct View 4K High Definition Arthroscopic Light Guide insertion on opposite side of the direction of view with a J-lock fixation for cannula. fully rotatable with fenestrated tip & conical and blunt tip obturator. Sheath- 5.95 to 6.0mm, high flow diagnostic cannula, double valve, fully rotatable cannula with fenestrated tip. Trocar-4.5mm conical obturator to fit with cannula. Arthroscopic Power Shaver System: Input voltage of 100 to 240V, 50/60 Hz power consumption not more than 350VA. Two separate receptacles for motor drive and powered instrumentation. Shaver should have 2 modes of oscillation for aggressive cutting Shaver should have button for flush lavage of joints on footswitch. Autoclavable Ultra-light hand piece with suction facility, with 3 hand control buttons and replaceable cable long 10ft (3 m). Maximum torque should not be less than 32oz.in and weight should not be more than 212 gms Pedal Style footswitch with 3 operating modes i.e. forward, reverse and oscillation. On-line LCD display for speed and direction referral. Should communicate with the fluid management system once connected with the cable. Camera Control Unit: System must have inbuilt 4K UHD Camera Console, LED Light source & wifi enabled image management system with recording via USB port along with recording in APP through in built wifi. Camera resolution must be 3840*2160 (native) 4K Camera Head: Camera head should have 4K, 3 chip MOS video sensor technology Must have transport shock and vibration compliance with ISTA 3A Video Field Rate 60 Hz Must have c-mount autoclavable coupler with 19.5 mm coupler length opt for 4mm scopes Must have digital zoom Video Data Transmission High-speed, low-voltage differential serial (LVDS), digital transmission via 12-foot camera cable Video Output Format Full UHD 2160p, 100% compatible with SMPTE ST-425-5 when used with the CCU Altitude: 3000 meters maximum 4K Monitor: Monitor should have resolution 4096 * 2160 pixels Monitor should support picture size (Diagonal) 789.06 mm (31 1/8 inches) 1387.8 mm (54 3/4 inches) Monitor should support effective picture size 698 * 368.1 mm (27 1/2 * 14 1/2 inches) Monitor should support pixel pitch 0.1704 x 0.1704 mm Monitor should have aspect ratio of 17:09 Monitor should have Pixel Efficiency of 0.9999 size is -125MB 1300 Seconds Video / Gigabyte Storage 10000 Images/Gigabyte Storage AirPrintT is required.

FESS INSTRUMENTS SET NUS SURGERY FESS & DCR SURGERY INSTRUMENTS Brand -KALELKAR / BESCO Blakesley Forceps 0 Blakesley Forceps 45' Blakesley forceps 90° Thrucut Forceps 0 Thrucut Forceps 45° Thrucut Forceps 90' Maxillary Sinus Forceps 30, 90, 120 Hewiser Forceps Tubular Rotatable Kerrison Punch Straight Kerrison Punch Curved Backbiting Forcep Tubular Rotatable Stammberger Ostrum Punch (Mushroom Forceps) Giraffe Forceps Upturned 55", 70, 90, 110" with vertical or horizontal opening Fronntal Sinus Bougie Set of 4 Sickle knife sharp/Blunt Ball Probe Double Ended Right Angled Ball Probe with J Hook Double Ended Antrum Curette oval or round cup Suction Canulla 45" or 90°

MICRO EAR SURGERY INSTRUMENT SET (EAR SURGERY INSTRUMENTS) (STAPEDECTOMY INSTRUMENTS) Brand -KALELKAR / BESCO Technical Specification Sickle knife , Circular knife Flag knife , Sickle and Flag knife Double Ended , Sickle and Circular knife Double Ended Circular and Flag knife Double Ended , House Curette Double Ended , Elevator Pick straight/curved/right angled , Fisch Perforator 0.3 mm to 0.8 mm. Hand Burr , Piston Depth Guage , Stapedectomy Instruments , Piston Cutting Jig Piston Autoclaving Box , Teflon Pistons Pistion Crimper Micro Ear Scissor Belluchi Operative Ear Speculam set of 4 Black Slotted or Plain Endural Retractor 2x2 Endural Retractor left/right Plester Micro Suction Canulla 116 to 24G Micro Suction Canulla Adaptor Silicone Suction Tube Cartilage Slicer

TONSILLECTOMY INSTRUMENTS SET Brand -KALELKAR / BESCO Technical Specification Davis Boyles Mouthgag with 5 blades Davis Boyles Mouthgag with 5 Slotted Draffin Bipod Stand with plate Tonsil Holding Forceps Tonsil Dissector cum Pillar Retractor Tonsil Dissection Forceps Tonsil Artery Forceps Straight Tonsil Artery Forceps Curved Tonsil Artery Forecps Negus Tonsil Scissor Tonsil Snare Tonsil Snare wire +Quincy Foreps +Adenoid Curette with cage + Adenoid Currette without cage + Younker Suction Canulla +B.P.Handle No 7 + Negus Knot Tier +Thrroat Instruments Tracheatomy Surgery Instruments + Tracheatomy Tube Chevalier Jackson/Fuller + Mosquito Artery Forceps + B.P.Handle No 3 + B.P. Blade No 11 + Fine Scissor 4" +Tracheal Dilating Forceps + Kilner Catpaw Retractor +Skin Hook + Single Hook Retractor +Double Hook Retractor

NASAL SURGERY INSTRUMENTS SET (SEPTOPLASTY INSTRUMENTS) Brand -KALELKAR / BESCO Technical SpecificationKillians Nasal Speculam 2" to 3.5" + St. Clair Thomson Nasal Specularm Set of 4 B.P. Handle No 3+ Freers Double Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator Symes Double +Suction Elevator + Lucs Forceps Round or Heart Shape + Jensen Middleton Septum Cutting Forceps + Jensen Middleton Septum Punch Forceps + Turbinectomy Scissor + Ballenger Swivel knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape with V Cut or. Plain + Hammer (Mallet) + Submucosal Diathermy+ Needle/Ball Probe + Nasal Packing Forceps + Spring Scissor + Catspaw Retractor + Tongue Depressor + Rhinoplasty Surgery Instruments + Raps + Cricoid Hook + Jenkins Chisel + Alar Retractor + Aufritch Nasal Retractor + Ash Septum Forceps + Walsham Septum Forceps + Gillies Osteotome + Nasal Packing Forceps + Silver Nasal Chisel with guard Left/Right + Skin Hook + Cottle Retractor + S.M.R Instruments + Killians Nasal Speculam 2" to 3.5" + St. Clair Thomson Nasal Speculam Set of 4 + Freers Double Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator + Suction Elevator + Turbinectomy Scissor + Ballenger Swivel knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape with V Cut or Plain + Hammer (Mallet)

MICRO LARYNGEAL SURGERY INSTRUMENTS SET Brand -KALELKAR / BESCO Laryngoscope MLS Black finish Adult/child/Paediatric with fiber optic carrier Chest Support Laryngoscope Distending Operating Type Laryngoscope for filling with Endoscope MLS Forceps Cup Type Straight/Left/Right/Upward/Downward MLS Forceps Serrated Type Straight/Left/Right/Upward/Downward MLS Scissor Straight/Left/Right/Upward/Downward MLS Vocal Cord Spreader MLS Mini Larygeal Forceps Triangular End MLD Needle Holder MLS SSickle Knife MLS Circular knife MLS Flag Knife MLS Probe 45°, 90° MLS Curette MLS Handle for use with Straight Instuments Suction Tube with Thumb Control Insulated Probe for Coagulation Bronchoscope/Esophagoscope & Instruments Bronchoscope Negue Type any Size with Fiber Optic Carrier Esophagoscope any size with Fiber Carrier Hypopharyngoscope (Esophageal Speculam) with Fiber Optic Carrier Forceps Alligator Grasping Single Action Forceps Peanut Soft Tissue Single Action Forceps Cub Biopsy Type Single Action Forceps Patterson Type Single Action Forceps Universal Biopsy & Grasping Single Action Forceps Alligator Grasping Double Action Forceps Peanut Soft Tissue Double Action Forceps Cup Biopsy Type Double Action Forceps Patterson Type Double Action Forceps Universal Biopsy &nGrasping Double Action Suction Tube Rigid with Thumb Conntrol

MASTOID SURGERY INSTRUMENTS SET Brand -KALELKAR / BESCO B.P. Handle No 4 Kilner Catspaw Retractor Mollison Mastoid Retractor 3x3 Mollison Mastoid Retractor 4x4 Mahadevaiah Modified Mastoid Retractor left/right Jensen Retractor Jolls Retractor Periosteal Elevator Operative Ear Speculam set of 4 Black Slotted or Plain Micro Suction Canulla 11G to 24G Micro Suction Canulla Adaptor Mastoid SuctionCanulla Set of 4 with thumb grip Sickle knife Circular knife Flag knife House Curette Double Ended Elevator Adsons Toothed Forceps Adsons Non Toothed Forceps Needle Holder 6" Fine Scissor 4" Micro Ear Crocodile Serrated Forceps Micro Ear Crocodile cup Forceps Micro Ear Crocodile Scissors MALLEUS Nipper Ball Probe 45 degree/90 deegre vien Graft PressOssicle Holding Forceps

Fiberoptic Flexible Video Laryngoscopy System Brand -(Penlon / Karl Storz) Specification 1) It should be very portable and light weight device with minimum display size should be 4 inch with high resolution anti reflective display. 2) Should have 180 degree horizontal screen rotation with vertical movement for better clinical assistance. 3) It should be a lithium ion rechargeable battery-operated device with low battery indicator. 4) Minimum operation item should be 130 mins. 5) It should have LED light source at the tip of the blade with minimum 2 megapixel cmos camera for better view. 6) It should have channelled and without channelled blade option. 7) Should have 4GB inbuilt memory for continuous recording & image capturing. 8) Blades sizes should be size 1,2, 3, 4,5 . 9) Blade should be affordable, sterile which connect laryngoscope handle with lock. 10) Battery life cycle should be minimum 300 times. 11) It should have ISO & conformity to CE.

Fiber-Optic Video Bronchoscope (Brand - Karl Storz /Olympus ) Specification Fiber-Optic Video Bronchoscope required with video illumination to visualize and document the operational area on screen. It should consist of following features: Monitor Screen 8 to 12 inch in size for display with touch screen to control features with HDMI output for connecting to a big screen which can display picture simultaneously on both screens. Monitor should have two ports to connect two video endoscopes at one time and pictures can be swapped using touch screen. Monitor should be chargeable, to be supplied with charger and should have facility to be used while charging. Monitor resolution should be minimum 1920 X 1200 pixels in 16:9 format. Integrated recording of Video & still images should be possible on data card or USB drive with JPEG and MPEG format which can be easily transferred to the computer/laptop. Documented videos & still images should be easily recalled on the monitor. Monitor Should have a facility to connect flexible scope directly without any special coupler or accessory. Monitor should have Picture-in-Picture & side-by-side mode to view images from flexible video scopes. Monitor should be splash proof according to IP 54 and should be shock resistant. Monitor should have lithium-Ion rechargeable batteries and run for at least 100 mins. when fully charged. Soft bag from same manufacturer should be supplied to place the monitor and system can also be operated without taking monitor out from the bag. Same Monitor should be compatible with all the below mentioned scopes of same manufacturing principal company . Reusable Fiber Optic Video Bronchoscope. Single use Flexible Intubation video endoscope A fiber optic bronchoscope is a medical device used to visualize the airways during bronchoscopy, a procedure where a thin, lighted tube is inserted into the lungs to examine them. The specifications of a fiber optic bronchoscope typically include its outer diameter, working length, field of view, angulation capabilities, and the diameter of its working channel. Key Specifications: Diameter: Bronchoscopes come in various sizes, with outer diameters ranging from 2.5 to 10 mm. Smaller diameters (e.g., 4.9 mm) are suitable for smaller patients, while larger diameters may offer better image quality and suction capabilities. king Length: The working length, which is the distance from the distal end of the bronchoscope to the insertion point, typically ranges from 30 cm to 60 cm. View: This refers to the angle of vision that the bronchoscope offers. A wider field of view (e.g., 110-120 degrees) allows for a broader view of the airways. Angulation: The ability to bend the tip of the bronchoscope allows for maneuvering into various airways. Up and down angulation capabilities are typically around 180 degrees and 130 degrees respectively king Channel Diameter: The working channel is the passage through which instruments like forceps for biopsies or suction devices can be passed. It is typically 1.2-2.3 mm in diameter Other Notable Specifications: 26/25 All above equipment should be from same manufacturers and USFDA & CE Approved

FULLY FUNCTIONAL AUTOMATIC DENTAL CHAIR WITH INBUILT SUCTION AND COMPRESSOR (Brand- Confident / Chamundi) Programmable Dental Chair, Unit Fitted with Floor Mount light with LED(FARO, MAIA) Operating light having, on/off and intensity control by non-touchsensor Monitor mounting arm High and low vacum motorized CRS suction System autocalvable 2 Nos Beecool II light cure cordless-1 no Modular Trolley system Over the Patient Airotor points- 2 Nos Supreme Micromotor 35,000rpm with digital display of speed Three way syringe- 1 Nos Supreme optic scaler with five scaling tips with endo chuck 1 no SS instrument Tray X-Ray viewer Multi function foot control "COMFORT" Dental operator's Stool COMPRESSOR Monobloc Oil-free Medical Grade Airotor Air Compressor 1.5/2 HP With Radiator cooler, condensor, silicon column filter for moisture, dust filter microbial filter fitted on MS Tank.

Dental Aerotor (Brand - NSK) Push button with LED light

Dental micromotor contrangle (Brand - NSK) Latch type

Dental micromotor straight with LED light (Brand - NSK)

Round, straight surgical bur for straight hand piece micromotor Carbide burs (Brand - NSK/Prima)

Round, straight, inverted cone and tapered fissure burs for aerotor Diamond FG (Brand- Dent Ark)

Rotary files Niti files Sx, S1 S2 F1 F2 and F3 (Brand- Dent Ark /NSK)

Integrated Electrosurgical Unit and vessel sealer Brand -Ensurge/ HTI Digital / KLS Martin / Enertech/Shalya Specifications For Integrated Electrosurgical Unit and vessel sealer 1) Advanced Electro Surgical unit with Vessel sealing System have Mono polar Cut & Coagulation, Bipolar and Vessel Sealing technology, all integrated in single system 2) Type of Display should be LCD touch screen 3) Display size should be 5” or more 4) Unit should have microprocessor-controlled tissue feedback technology. 5) The system should have Capability to convert electrical energy to radio frequency energy thus providing radio-frequency seal 6) Number of tissues sensed per sec should be 4000 or higher 7) Vessel Fusion system must be able to seal artery, veins along with tissue bundle up to & including 7mm in diameter & sealed vessels should be able to withstand at least 3 times the systolic blood pressure. 8) Low Frequency Leakage should be 50 or higher (in mA) 9) High frequency leakage (RF) must be Less than 100mA in mono polar and vessel sealing mode and less than 70mA in bipolar mode 10) Should be provided with RS 232 data Input Port for software upgrade facility 11) System must have recall facility to recall the last setting used by user before turning off the power directly or through user programs. User can use pen drive with their setting to recall the setting saved by them. 12) System should have bipolar resection including under water cutting. 13) The system should be provided with Twin monopolar socket (Only one socket to be activated at a time) with independent power setting 14) 5 or more numbers of cutting modes available in monopolar 15) Maximum Power should be 400w or higher 16) Maximum power of Blend mode for cutting with homeostasis should be not less than 250W 17) Fulgurate/Forced mode, Spray mode, soft mode of monopolar Coagulation should be available. 18) Unit should be supplied with 4 or more Nos. of monopolar coagulation modes 19) Coagulation mode power (monopolar) should be 150w or higher 20) Coagulation mode power (Bipolar) should be 120w or higher 21) Number of bipolar cutting modes should be or greater than 5 22) Maximum Power for ligation not less than 100w 23) Maximum power for resection not more than 300W 24) Equipment should have On Screen review of error codes and diagnostics. 25) System should have patient plate contact quality monitoring system giving audio-visual alarm and deactivating output if contact between patient and patient plate is not proper to eliminate the risk of patient burns. It should be mandatory, should have contact quality monitoring with split style patient return electrode and deactivates output if contact between patient and patient return electrode is not proper to eliminate the risk of patient burns, manufacturing by same OEM 26) Auto Bipolar start and stop along with user configurable auto start facility should be available 27) Power output of Vessel sealing system (VSS) not more than 150W 28) Vessel Sealing System should be able to Seal vessels or tissue bundles faster than any conventional devices (preferably within 2-4 seconds) 29) Product should be CE certified (4 digit notified body). 30) It should have IEC-60601-1-1, IEC 60601-2-2 safety and design standards Certification & ISO 9001: 2008 & ISO 13485:2003 certified Company. 31) Warranty of the unit should be 5 years 32) It should be supplied with All following accessories, should be reusable and autoclavable: - o Patient return electrode --- 1 No. o Cable for return electrode --- 1No. o Hand switching pencil --- 1 No. o Foot switching pencil --- 1 No. o Double pedal footswitch with toggle function (common/individual for monopolar, bipolar and vessel sealing) - 3 No. o Universal adaptor --- 1 No. o Bipolar forceps --- 1 No. o Cable for bipolar forceps --- 1 Nos. o Set of Electrode (Angled, Ball and Needle) ------ 1No. o Reusable Sealing clamp with cable--- 1 No. o Curved jaw vessel sealer 5 mm, 32 to 37 cm -- 1 No. o Autoclavable Reusable cutting instrument – 1 No. Additional Terms & Conditions: 1. Vessel Sealing Laparoscopy instruments should have both hand and foot activation mode and should be EU CE (4 digit notified body certified) or USFDA Approved. 2. All sockets should be of blinking light type when in use to identify the used mode. 3. R.F. Frequency should be in between 350-500KHz for all modes. 4. It should have Bipolar RF Scalpel Mode for dissection & desiccation. RF Bipolar scalpel instruments should have hand control button for coagulation & cut. 5. Equipment should be USFDA approved/ EU CE (4 digit notified body certified). It should have IEC-60601-1- 1, IEC 60601-2-2 safety and des

CTG Machine Brand - BPL/Maestros/Bistos Specification Foetal Monitor with display and printer Should have 12.1” high resolution colour TFT Display with Tiltable Screen for better viewing. Should display FHR, TOCO, Foetal Movement in numeric values . Should display 2 X FHR and TOCO graphs in different colours. Should have the facility for data save with play back & print facility Should have facility to monitor information of last 25 hours Should have special high sensitive watertight probe for better durability Should have the low ultrasound power for the safety of the foetus Should have automatic foetal movement detection Should have event marking facility by mother and user Thermal printer with minimum 152MM paper width is essential for broader printouts Standard configuration should be FHR, TOCO, and Foetal Movement Should have volume control for FHR beep sound and alarm. Should have alarm setting for Weight should be less than 4 kg for easy portability. Should have Foetal stimulator built in to FHR probe and activation key should be there on the front panel. Stimulation should be recorded on the recording paper and should be displayed on the screen. Built in rechargeable Li-on battery for backup Should work with input 200 to 240Vac 50 Hz supply Central monitoring system software upgradability should be possible (optional) Should be supplied with the following standard accessories: Power Cord- 01 FHR Probes – 01 Nos TOCO Probe -01 Patient Event Marker Belts – 02 Nos Gel – 1 bottle Thermal paper- 02 No

Digital Video Colposcope Brand - BPL/Maestros/Bistos Specification 1. Should have LED cold lighting system reproduces an original view of tissue. 2. LED lights are replaceable. 3. Should have Advanced and fast auto-focusing system to ensure clear image. 4. Should have Remote capture control and user-friendly keyboard layout for one handed operation. 5. Should have Electronic green filter that enhances vascular image display without compromise of illumination. 6. Should have Working Distance of 6.7 - 11.8" (170 - 300 mm). 7. Should have Magnification of 1X - 36X. 8. Should have Resolution of 3,80,000 pixels or more 9. Should have Horizontal Resolution of > 470 lines. 10. Should have Field of View of 0.4 - 5.9" (10 - 150 mm). 11. Signal/Noise Ratio should be ≥ 50 db. 12. Should have Signal Output of S-VIDEO, PAL/NTSC. 13. Should have Acetic acid and iodine reaction test timer to precisely detect low/high grade CIN. 14. Should have Real-time display of magnification. 15. Should have Powerful Colposcopic findings gallery for comparison analysis. 16. Should have R-Way Evaluation Program supports cervical disease diagnosis guidance for clinical users. 17. Should have DICOM 3.0 supportive. 18. Should be manufactured by an ISO certified company

Vessel sealing device for open surgery shaft length-23cm curved tip (Box of 6) (A) Curved Jaw Vessel Sealer Hand instrument working based on tissue impedance sensing technology. Brand - Enertech/Ensurg/HTI Digital/ KLS Martin A} Curve Jaw vessel sealer B) Should be able to seal any vessel of 7 mm diameter with automatic sealing time 2-4 sec. C) Sealing should withstand 3 times systolic pressure. D) Scaling length 20 mm; cutting length 18 mm, shaft length 23 cm; shaft diameter 5 mm E) Jaw surface should be nano coated for faster cooling and less stickiness jaw temperature should not exceed 91 degrees Celsius after multiple activation. F) It should have cable with RF ID and compatible with existing RF Generator. Technical specification for

Vessel sealing laparoscopic surgery, shaft diameter-5mm, length-37 cm jaw type curved jaw double action with contoured tips, shaft rotation 350 degrees, jaw surface-textured ceramic stops.jaw aperture-13mm seal plate length- 20.3(Box of 6) Brand - Enertech/Ensurg/HTI Digital/ KLS Martin A) Blunt tip Vessel Sealer Hand instrument working based on tissue impedance sensing technology, capable to seal any vessel of 7 mm diameter with automatic sealing time 2-4 sec. B) Sealing should withstand 3 times systolic pressure. C) Sealing length 20 mm; cutting length 18 mm, shaft length 37 cm D) Jaw surface should be nano coated for faster cooling and less stickiness:jaw temperature should not exceed 91 degrees Celsius after multiple activation. E) It should have cable with RF ID and compatible with existing RF generator.

Vessel sealing instrument for open surgery, instrument length 20.6cm-21 cm, curved Jaw, hand and foot switching(Box Of 6). Brand - Enertech/Ensurg/HTI Digital/ KLS Martin A) Exact Open Instrument working based on tissue impedance sensing technology, capable to seal any vessel of 7 mm diameter with automatic sealing time 2-4 sec. B) Sealing should withstand 3 times systolic pressure. C) Instrument length should be 21 cm. D) Curved Jaw in 28 degrees, Seal Length 19.3mm, cut Length: 18.5mm E) Jaw surface should be nano coated for faster cooling and less stickiness; jaw temperature should not exceed 91 degrees Celsius after multiple activation. F) It should have cable with RF ID and compatible with existing RF Generator.

Vessel sealing device laparoscopic surgery. shaft diameter-5 mm, Maryland jaw curved device length 37cm (Box Of 6) Brand - Enertech/Ensurg/HTI Digital/ KLS Martin A) Curved Jaw Vessel Sealer Hand instrument working based on tissue impedance sensing technology, capable to seal any vessel of 7 mm diameter with automatic sealing time 2-4 sec B) Sealing should withstand 3 times systolic pressure. Scaling length 20 mm; cutting length 18 mm, shaft length 37 cm; shaft diameter 5 mm C) Jaw surface should be nano coated for faster cooling and less stickiness; jaw temperature should not exceed 91 degrees Celsius after multiple activation D) It should have cable with RF ID and compatible with existing RF generator.

Vessel sealing device for open surgery with shaft length 18.8 cm, jaw type-curved jaw (Box of 6) Brand - Enertech/Ensurg/HTI Digital/ KLS Martin A) Small Jaw Open Instrument working based on tissue impedance sensing technology, capable to seal any vessel of 7 mm diameter with automatic sealing time 2-4 sec. B) Sealing should withstand 3 times systolic pressure. C) Instrument length should be 18.8 cm. D) Curved Jaw in 28 degrees, Seal Length 16.5mm, cut Length: 15.5mm E) Jaw surface should be nano coated for faster cooling and less stickiness; jaw temperature should not exceed 91 degrees Celsius after multiple activation. F) It should have cable with RF ID and compatible with existing RF Generator.

OT Light ( Brand - SHALYA/Mattrix/Surgident) Description of Function LED surgical lights illuminate the surgical site for optical visualization of small low contrast objects at verifying depths in incisions and body cavities. 1. General Requirements 1.1. The light shall adopt LED Technology to create a homogenous light patch without emitting any infrared rays. 1.2. The light system shall be Dual light heads, one major and One satellite. 1.3. Light should have electronic focusing from control panels without any motorized or mechanical movement of light panels. 1.4. All Dome should have 2 Colour LED lamps, White (Cool White) & Amber (Warm White) to achieve high CRI and get the required shade of light as per different surgical requirements. 1.5. High power LED's of 5watts & above should be used to provide high lumen to watt ratio which leads to lesser energy consumption and low heat at surgical area <2 deg. 1.6. Lights should have higher watts LEDs to achieve high lumen to watt ratio which leads to lesser energy consumption and low heat at surgical area. 1.7. Pulse width modulation-controlled LED driving to ensure less heating of LED which increases life of LEDs and no change in Light colour Output and light colour temperature throughout life. 1.8. The major system shall with automatic illumination control system with sensors on the light head. When some part of LED is masked by surgeon’s head or shoulders, the remaining LED’s will become brighter automatically to compensate for the losing illumination. 1.9. Light intensity shall be adjustable between 30% -100% and should have low intensity light for endoscopy mode. Light Intensity, light field diameter and color temperature should be controlled from Electronic Touch control panel mounted on light arm and wireless wall mount Electronic Touch control panel. It should also have provision to Control the Intensity, Electronic Focus, Depth from Sterile field though Capacitive touch control handles. 1.10. The light head shall be of petalled / winged shape to avoid obstruction to laminar flow on surgical field. 1.11. The color temperature shall be synchronized & controlled by either light head control panel. 1.12. The light shall be mountable to ceiling from single center with 360-degree rotation of all arms. Spring arms shall be rotatable at least 360 degrees around its own axis. Each dome head should be rotatable with 360 degree at connecting joint with spring arm and at least 300 degrees around its own axis. This feature should be applicable with a camera mounted dome also. 1.13. The maximum movement angle of the spring arm shall be at least up 45°and down 50 1.14. The thickness of the light head shall be no more than 70 mm. 1.15. Each LED shall be replaceable individually to save cost in case of failure, instead of replacing the module with several LEDs. 1.16. The surgical light should be complete with all components for celling mount and electrical feed-in, including finalized installation. 1.17. Detachable & auto cleavable handle (3 nos.) for each light should be provided. 2. Technical Requirements of both Domes: 2.1 It should have 2 colour LED lamps, White ( Cool White) & Amber( Warm White) 2.2 The Central Illuminance should be 160,000 lux 2.3 Light field Diameter should be adjustable from 150mm to 300mm 2.4 D10: 300mm & D50 :160mm 2.5 Color temperature (K), adjustable from 3500-5000K 2.6 Color rendering index Ra should be 95 or more and R9 should be 93 or more 2.7 Depth of illumination (L1+L2) as per IEC 60601-2-41 (Ver 2003) should be 650mm and as per IEC 60601-2-41 (Ver 2008) should be 1200mm. 2.8 Dimming range should be between 25-100% 2.9 Endoscopy mode illumination should be less than 5% of 160,000 lux 2.10 Number of LED bulbs the light head should not be more than 70 2.11 LED Service life should be minimum 60000hrs 2.12 Light Head Dimension Should be 700mm (=/- 20mm) 2.13 Max. power consumption of all light sources should be less than 100W at maximum setting. 2.14 Power supply should be 100-240V AC, 50-60Hz 2.15 One dome should be ready for the Wireless Camera Attachment. 3.Standards • ISO 9001:2008 • ISO 13485:2003, • European CE with 4 digit notified body / EU CE with EU Free sale Certificate /US FDA Registered . • Should compliance with: IEC 60601-1, IEC 60601-2, IEC 60601-2-41, Certificate from any NABL accredited lab / any lab from country of origin for imported brands

Suction Machine (Electrical) (Brand -Supreme / Goley) Type: Electrical Pump Type: Oil Immersed Rotary Vane Capacity: High Vacuum Voltage: 220 VAC, 50 Hz, 1 Ph Number of Wheels: 04 (Antistatic) Air Flow: 35 Ltrs/Min Current: 1.8A Noise (Decibel): 30~35 dBA Power Consumption: 370W Weight: 25 Kgs Flow Rate: 35 LPM Vacuum Gauge: 100mm Reservoir Volume: 5000ml Tubing: Non-Collapsible Suction Tubing Max Vacuum: -720mmHg Motor: ½ HP, FHP 100% Copper winding RPM: 1440 Jars: Polycarbonate 2x2.5 Liters capacity Filter: Bacterial Filter Autoclavable /Reusable Suction Machine should be IS I Marked

Fully Automated Biochemistry Analyser Brand (Erba Transia/ Meril) Random Access system with STAT capability. Analytical principle Spectrophotometry & Photometry, turbidometry principles. Assay type End point, Rate, Fixed point, Kinetic, ISE (optional). On board parameter - Present. Programmable tests - Present. On board cooling for reagent Present. Through put - 200 test/hour or more, continuous loading facility. Sample types Serum, plasma, urine & other body fluids. Sample volume 0-70 micro litres (approx). Sample quality analysis, clot detection & probe crash protection - Present. Reagent volume 10 microlitre to 300 microlitre (approx.). Total reaction volume 90 microlitre to 350 microlitre. Reaction cuvettes - Permanent glass cuvettes with on board laundry. Possibility of replacement of individual cuvette. Photometric Range 0-3.0 OD. 15. Wavelength-340-800 with minimum & standard wavelengths (340, 405, 505, 546, 578, 600, 700 nm) Calibration Autocalibration, cooled calibration position, history of graphical calibration data stored. Quality control At minimum 4 level QC plot westgard rules, twin plot, Levey Jennings graph, cooled QC position. Data storage of patient Present proper system of storage Minimum water consumption. Warranty 5 years warranty Power back up facility for instrument. Autopipettes to be provided with instrument 10 micro litre (fixed) 01 nos. 1000 micro litre (fixed) 01 nos. 0-100 micro litre (variable) 01 nos. 0-500 micro litre (variable) 01 nos. 100-1000 micro litre (variable) 01 nos. Demo Kit with instrument Reagents Kits provided with Instrument: Creatinine, Urea Uric Acid, Triglyceride, Sugar Cholesterol, TP, Albumin, SGPT, SGOT, Alkaline Phosphatase, Bilirubin Instrument: USFDA Registered and CE IVD Approved

CBC Machine Brand -(Accurex / Erba/ Meril) Measurement principle Electrical impedance for counting RBC WSC & Platelets Colorimetric estimation of HGB at 540 nm Parameters WBC, LY#, MID, GR, LY%, MID%, GR, RBC, HGB, HCT, MCV, MCH, MCHC, RDW-CV, RDW-SD, PLT, MPV, PDW, PCT, P-LCR, P-LCC Throughput - 60 samples/hour Micro-aperture WBC: 100 µm RBC/PLT:68 µm Sample type Whole blood or pre-diluted sample Sample volume Whole blood (venous blood): 10 µl Pre-diluent (capillary blood) : 20 µl Chamber Dual chamber: RBC/Platelets & WBC/HGB Reagents- 3 Reagent System: Diluent, Detergent & Lyse (non-cyanide) Measurement Range Linearity Range Acceptable Limits WBC 0x10/L-10.0×109/L <= plus/minus 0.3 * 10 ^ 9 / L 10.1×109/L-99.9×109/L 0x102/L-1.00×102/L <= (plus/minus 5)% <= plus/minus 0.05 * 10 ^ 12 / L RBC 1.01x102/L-9.99x102/L <= (plus/minus 5)% Quality control - 4 QC options: L-J, X-B, X-R & X QC Graphs plotted with 31 data points Data memory - Upto 100,000 (with histogram) Display - 10.4 inch color LCD with 640 * 480 resolution Printer Built-in thermal printer Interface: Support RS-232C, standard network port and USB; keyboard and mouse Operating environment - Temperature: 15°C-35°C Electrical specification- Fuse specification: 250V/3A Humidity: ≤ 85% RH Frequency: 50/60 Hz Low: 1 x 3ml/Normal: 1 x 3ml/High: 1x3 ml

Sthetoscope Brand- BPL/Littman

Pulse Oxymeter Brand - Dr Trust /Beurer/ BPL Specification Finger chamber with smart spring system Accommodates a wide range of finger sizes Pop-up menu to setup alarm limits for SpO2 and Pulse Rate Low battery indicator Pule rate: Yes Auto power-off: Yes Bright, large display for better visibility in daylight Anti-movement feature Sturdy, portable and light-weight Very easy to operate with single switch operation Warranty ( Only Checking Warranty )

Nebulizer Machine ( Brand -BPL/Dr Trust) Operation Mode Table Top Size Compact Application Clinical Purpose, Hospital Medicine Cup Capacity 50 ml Particle Diameter 1-5 um

Percussion Hammer SS 304

Tuning Fork 128 hz Satinless Steel

Laryngoscope A laryngoscope is a device used in medical procedures to visualize the trachea by inserting a blade with a small light into the patient's mouth

Oxygen Concentrator Brand- Philips/BPL/DECK&MOUNT 1. Flow Rate :-0-5l/min 2. Purity 93+3% 3. Outlet Pressure(Mpa):-0.04-0.07 4. Sound Level :-<50 dba

High Flow Nasal O2 Cannula (Brand- Drager / Nice Neotech ) High-flow nasal oxygen (HFNO) therapy delivers heated and humidified oxygen at high flow rates (up to 60 liters per minute) through a nasal cannula

Electric Needle And Syringe Destroyer Hub Cutter Stainless Steel With Auto-cut Protection

Clinical Thermometer (Digital)

Medical Labrotary Refrigrator ( Brand- Remi / VAV intruments) Capacity 600 litres Temperature Range 2°C to 8°C Internal Configuration Adjustable shelves and storage bins for optimal space utilization Cooling Type Uniform cooling for consistent temperature distribution Display & Controls Digital display with user-friendly controls Power Supply Energy-efficient performance

Refrigrator Domestic Single door Godrej/ Kelvinator/ Bluestar Capacity 200 litres to 265 Liters Temperature Range 2°C to 8°C

Wieghing Scale Mannual

Knee Hammer

Sahli,s Heamoglobinometer

Artery Forcef Staright 6" (Brand - JJ Instrument)

Double hook retractor Standard Size (Brand - JJ Instrument)

B.P handle no 3 (Brand - JJ Instrument)

Artery forceps curved (fine tip) 4" Mosquito(Brand - JJ Instrument)

Artery forceps curved (fine tip) 6" Medium(Brand - JJ Instrument)

Artery forceps curved (fine tip) 8" long(Brand - JJ Instrument)

Artery forceps curved (fine tip) 9" long(Brand - JJ Instrument)

Allies forceps Big (Brand - JJ Instrument)

Allies forceps Medium (Brand - JJ Instrument)

Allies forceps Small (Brand - JJ Instrument)

Mayo Scissior STR 5 ½" STTILETTE EDGE(Brand - JJ Instrument)

Mayo ScissiorCVD 6 ¼" STTILETTE EDGE(Brand - JJ Instrument)

Scissors straight 6" Medium(Brand - JJ Instrument)

Scissors straight 5" Small(Brand - JJ Instrument)

Scissors straight 8" Big(Brand - JJ Instrument)

Steinman pin introducer SS(Brand - JJ Instrument)

Towel Clip 6" Big(Brand - JJ Instrument)

Towel Clip 4" Small(Brand - JJ Instrument)

Wire Cutter 9'' Standard Size(Brand - JJ Instrument)

Detnal wire Standard(Brand - JJ Instrument)

Langenbeck retractor Medium(Brand - JJ Instrument)

Langenbeck retractor Small(Brand - JJ Instrument)

Langenbeck retractor Big(Brand - JJ Instrument)

Cat's paw retractor Standard Size(Brand - JJ Instrument)

K-wire cutter with tungsten carbide tip 7" Standard(Brand - JJ Instrument)

Hintermann distractor Medium(Brand - JJ Instrument)

Mippo wire passer for long bone Large(Brand - JJ Instrument)

wire bender Standard Size(Brand - JJ Instrument)

Kocher clamp 8" Standard Size(Brand - JJ Instrument)

Glucometer (Brand-Dr Trust / Dr Morphen/Accucheck/Accurex) Fast result in 5 seconds Small 0.5uL blood sample size Large memory. 10 Lancets Minimum Blood Sample: 0.5 microlitre ; It features a large display screen that can store up to 300 test results

Vortex Mixture (Brand -Remi /Borosil/ benchmark) Type of Product Cyclomixer Shaking Movement Orbital Orbital Diameter (mm) 4 Motor Type Shaded-Pole Motor

Bio Saftey Cabinet Type-II A microflow (Brand - Microflow / Thermofisher) Specification MATERIAL OF CONSTRUCTION (MAIN BODY) CRCA/GI Powder Coated/Stainless Steel 304 Material of Construction (Work Table) Stainless Steel 304 DIMENSIONS EXTERNAL (WXDXH) -1950 x 900 x 2250 mm INTERNAL (WXDXH) - 1830 x 610 x 610 mm Average Air Velocity - 90 ± 20% FPM HEPA/ULPA - Efficiency 99.997%/99.999% Class Level - ISO 3/5 (Class 100) Noise Level - 65 ± 5 dB Electrical - 230 V, 50 Hz, Single Phase Special Features - Motor driven front door, alarm, HEPA filter blockage, timer for UV light, power socket inside the cabinet pressure sensor monitoring, digital airflow verification, Interior eye level display, display parameters including down flow air velocity, total operating hours. Standards US FED STD 209 E, ISO 14644-1, IEST-RP-CC-002-2, BSI Certifications- CE & ISO

CO2 Incubator (Brand - Remi / Thermofisher) Specification Chamber Volume (150 Liters) Sensor Infrared CO2 Heating Method Air-Jacketed, PID Control CO2 Range 0~20% V/V CO2 Control resolution ± 0.1% (IR sensor) Temperature Range RT+5~55°C Temperature Stability ± 0.1°C Humidity Method Natural vaporization > 95% CO2 Recovery (Door open 30s, recovery to 5%) ≤ 3 min Temperature Recovery (Door open 30s, recovery to 37°C) ≤ 8 min Shelves 2 3 Interior Dimension (mm) (W x D x H) 400 x 450 x 500 480 x 530 x 610 Exterior Dimension (mm) (W x D x H) 590 x 687 x 790 670 x 767 x 880 Supply:220-240 Volts, 50 Hz Single Phase

BINOCULAR MICROSCOPE - Olympus( Model CH21i) / Magnus (Model- PZB 22) (Specification) OPTICAL SYSTEM: - High Contrast finite colour corrected optical system MAGNIFICATION:- 40x to 1000x visual magnification. STAND: Aluminium die-cast stand with hand rests for enhanced comfort and stability. OBSERVATION HEAD: - Sidentopf Binocular/Trinocular head, 360° rotatable, Interpupillary distance 53-75mm, with dual diopteric adjustment. EYE-PIECE: - Wide Field 10x F.O.V 22mm, Anti-Fungal & Anti- reflection hard coated (Optional 10x/18mm). NOSEPIECE: - Reverse Angle Quadruple nosepiece (Ball bearing type) with precise click stops. OBJECTIVE: - QUSP Series high-contrast flat shield PLAN DIN Achromatic Objective 4X, 10X, 40X (S) and 100X Oil, (S), Anti-fungal & Anti-reflection hard coated. MECHANICAL STAGE: - Rack-less X Axis double plate stage, size 190 x 125mm (+-5mm) with cross travel 90 (X) x 50mm (Y) on ball bearing with co-axial controls. Hard coated surface for scratch resistance. Double specimen holder clip. FOCUSING CONTROL: - Co-axial coarse and fine focusing on gear systems for smooth operation. Fine adjustment 0.2mm/rotation with maximum 2-micron scale increment. CONDENSER: - Sub-stage moveable ABBE Condenser, centerable, NA 1.25 with aspheric lens. Iris diaphragm and special FROSTED white filter, Swing-in, and swing-out filter holder. LIGHT SOURCE: LED 3.5W 3V illumination with variable illumination control Universal power supply 110V-240V, CE approved. SUPPLY WITH: Power cable, Immersion oil, Spare bulb (in LED only) User manual, Vinyl Dust cover, cleaning cloth, and 01 units Fuses Optional ACCESSORIES: - Wooden carrying case, Pointers & Micrometre Reticules

All in one PC ( Brand- HP/Dell/Lenovo) All-in-One PC 13th Gen Intel Core i5 27" (68.6cm) FHD 16GB RAM, 1TB SSD, Intel UMA Graphics, 710 White Wireless Keyboard and Mouse Combo (Windows 11 Home, MSO 21, Shell White, 6.72 Kg) 27-cr0407in

Desktop ( Brand- HP/Dell/Lenovo) 13th Gen Intel Core i5 27" (68.6cm) FHD 16GB RAM, 1TB SSD, Intel UMA Graphics, Wired Keyboard and Mouse Combo (Windows 11 Home, MSO 21) 27-cr0407in

Air Conditioner ( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) AC 1.5 Ton 05star Smart Inverter AC with Installation & Extra wire /Pipe

Air Conditioner ( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) AC 2 Ton 05star Smart Inverter AC with Installation & Extra wire /Pipe

Lithium battery 1500Wh Battery 48W 120Ah ( Brand- Luminous /Amaron)

Executive premium office chair, Leather “Adjustable Arms ergonomic chair must be High Back ( Brand- Godrej)

Office Table 4X3 feet ( Brand- Godrej)

Mid Back office chiar ( Brand- Godrej)

Revolving stool ( Brand - ALIZA /Godrej) 3 leg SS Top Powder Coated Thickness minimum- 14 Gauge

Steel Almirah W x H x D: 91.44 mm x 197.866 mm x 485.140 feet for office use (Brand- Godrej)

Xerox Machine (HP/Canon/Ricoh) Print Duplex, Copy, Scan, A3 Black and white Laserjet Printer, Enterprise Departments/ Distributed Workforce, Laser printer's print speed is up to 22 pages per minute (ppm) for black and white printing

Imcubator Electrical 23 Lts thermostat

Centrifuge Machine Clinical ( Brand - Remi /Benchtop)

Salters Baby Wieghing Machine

Oto Scope

Chloroscope

Horrock,s Appratus portable

Sound level Meter decible meter with LCD Display

Water Depth Sampler

Vaccine Carrier

Mosquito Catching Kit

Craft Water Testing Kit