SPECIAL REPAIRS TO EXTERNAL LIGHTS AT VARIOUS LOCATIONS OF MCEME UNDER AGE E/M NO.02 OF GE(U) SECUNDERBAD

Amount

Excavation in trenches not exc 1.5 mtr in wide and not exc 1.5 mtr in depth for laying of under ground cable and getting out in Hard / dense soil complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 mtr wide and exceeding 1.5 mtr deep and not exceeding 3 mtr deep for excavation of poles and getting out in any type of soil complete all as specified and directed.

Returning filling in, including spreading, levelling watering and well ramming in layers n exc 25 cm as in any type of soil, complete all as specified and directed.

Removal of excavated material soils to a distance n exc 50 m and depositing where directed at a level not exceeding 1.5m above the straight point, complete all as specified and directed.

Material and labour for sand cushioning using dry and clean tibba sand in two layers, first layers of 80mm thick before laying of cable and second layer of 150mm thick after laying of cable in trenches/ducts including consolidation of each layers complete all as specified and directed.

Supply & Laying bricks using sub class ‘B’ bricks (old size) for cable protection laid flat and dry in trenches over cable perpendicular to direction of cable, complete all as specified and directed

Supply and lay XLPE Insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade of size 16 Sqmm x 4 Core incl taking out old cable and cable protection bricks complete all as specified and directed.

All as per item No-07 above but size 10 Sqmm x 2 Core.

M&L steel tubular poles swaged of size 410 SP-31 (9 metres long) with cast iron base plate finial taper plug including nuts, bolts and washers including painting with two coats of aluminium paints over one coat of red oxide primer on all exposed surface and tarring with black bituminous paint to the portion embedded in PCC including numbering of poles with two coats of synthetic enamel paints complete all as specified and directed. Note :- (a) Excavation and earthwork. (b) PCC in foundation shall be measured and paid separately.

Material and labour for PCC 1:3:6 type C2 using 40mm size graded stone aggregate as in foundation mass concrete to pole all as specified and directed.

Material and labour for PCC 1:2:4 type B1 using 20mm size graded stone aggregate as in coping to pole including form work all as specified and directed.

S&F Energy saving & Environmental friendly long life Varsatile pressure die cast aluminium with IP66 protection Flood Light fitting with high power LED as light source of capacity 150 watts with suitable driver and all standard accessories etc fixed to Highmast in any location and position including disconnecting/taking out old existing unsv Flood Light fittings complete all as specified and as directed. Make :- Havells Cat No -JETAIRISFLS150WLED757PSYMLTG or techno commercial equivalent model in Bajaj Cat No- BJFL 150W LED/Wipro. Note:- (i) LED's used should be the make of Cree/asram/Lumilieds/widchia (ii) Contractor has to produce LM-79/ LM-80 certificate along with purchase vouchers and Guarantee certificate from Manufacturer (iii) Surge protection of the drive should be 10 KV. (iv) Cable if required for connection will be measured and paid separately under respective item.

All as per item No-12 above but of capacity 120 Watts Flood Light Fitting. Make :- Havells Cat No -JETAIRISFLS120WLED757ASYMLTG or techno commercial equivalent model in Bajaj Cat No- BJFL 120W LED/Wipro.

All as per item No-12 above but of capacity 200 Watts Flood Light Fitting. Make :- Bajaj Cat No- BJFL 200W LED I or techno commercial equivalent model in Havells/Wipro.

S&F new generation energy saving and environmental friendly long life varsatile pressure die cast aluminium IP66 road way light fitting with high power LED as light source of capacity 60 Watts with suitable drivers etc and connecting with 4.0 sqmm aluminium conductor PVC insulated twin core weather proof cable etc, fixing to wall / pole with and including bracket made out of GI pipe of suitable dia light grade not less than 1.5 mtr long, bent to shape, fixed to Pole/Wall in any position with flat iron clamps of size 30 x 4mm including taking down old unserviceable street light fitting of any type and capacity complete all as specified and directed. Make :- Havells Cat No-ENDURAPEARLPLUSSL60WLED757SASYTOPC or techno commercial equivalent model in Bajaj/Philips/Wipro. Notes :- (i) LED's used should be the make of Cree/Osram/Lumilieds/Nitchia, (ii) Contractor has to produce LM-79/ LM-80 certificate along with purchase vouchers. (iii) Surge protection of the drive should be 10 KV or equivalent model in Bajaj / Philips or Wipro.

All as per item No-15 above but of capacity 45 Watts Road way street light fitting. Make :- Havells Cat No-ENDURAPEARLNEOSL45WLED757SASYTOPC or techno commercial equivalent model in Bajaj/Philips/Wipro.

S&F FR PVC insulated and single core unsheathed multistranded copper conductor for voltage grade up to 1100 Volt of size 2.5 Sqmm, conforming to IS-694:2010 including taking out of old unserviceable complete all as specified and directed.

All as per item No-16 above but of size 1.5 sqmm.

S&F Junction box of size 270 x 225 x 135 mm Hinged (R) (or nearest size) outdoor type complete with three phase and neutral, aluminium bus bar 25x4 mm size and one MCB 6 Amps SP 10 KA including fixing with two nos flat iron 25x4 mm clamps of suitable size with necessary mild steel nuts & bolts including takaing out old unserviceable junction box complete all as specified.

M&L for Galvanised iron pipe (Light grade) 32 mm bore dia, laid in trenches or fixed to pole with necessary MS Clamps, bolts, nuts, washers etc complete as in protection of UG cable including taking out old unserviceable GI pipe complete all as specified and directed.

M&L for making horizontal bore hole under road crossing of size 80 mm dia bore at the depth not less than 1 mtr below ground level for passing of UG cable using machinery equipments complete without damaging the surface at suitable depth for site requirment complette all as specified and directed.

M & L for Earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr deep below normal ground level, connected to pole/LA etc and incl GI earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers, protected with and incl 15 mm dia light grade GI pipe, 20 mm dia GI pipe (Medium grade) for watering, necessary earth work. PCC 1:3:6 type C1 concrete pit, RCC (1:1.5:3) type A1 pre-cast cover (54X54X5 cm) duly reinforced with and incl 8 mm dia TMT bar @ 150 mm c/c both ways, one lifting handle made of 8 mm dia TMT bar, embedded in pre-cast cover slab all as specified and shown in electrical plate No-3 of SSR Part-I incl testing on completion alongwith including Dismantling/Taking down old unsv earth plates complete all as specified and directed.

M & L for Earthing complete with galvanised steel earth plate electrode 600X600X6.3 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr deep below normal ground level, connected to test point/transformer/panel/pole/LA etc and incl GI earth lead strip of 25X4 mm dia by means of bolts, nuts, check nuts and washers, protected with and incl 40 mm dia light grade GI pipe, 20 mm dia GI pipe (Medium grade) for watering, necessary earth work. PCC 1:3:6 type C1 concrete pit, RCC (1:1.5:3) type A1 pre-cast cover (54X54X5 cm) duly reinforced with and incl 8 mm dia TMT bar @ 150 mm c/c both ways, one lifting handle made of 8 mm dia TMT bar, embedded in pre-cast cover slab complete all as specified and shown in electrical plate No-3 of SSR Part-I incl testing on completion alongwith including Dismantling/Taking down old unsv earth plates complete all as specified and directed.

S&F in replacement of lantern of dia 60 cm for fixing of LED Flood Lights, cap type to be fixed on the top of 9 m SP-31 Steel Pole, made of MS Pipe (MG), dia greater than the top dia of the pole of length 0.35 m supported by MS flat iron of size 50 x 6 mm - 08 No's incl two coats of aluminium painting over a coat of red oxide primer complete all as specified and directed.

SANJEEV CONSTRUCTIONS

vvcenterprises

DPS sales and services india

The Deccan Engineering and Refrigeration Company

POWER CONSTRUCTION COMPANY

Mavee Syndicate

STANDARD AGENCIES