CONSTRUCTION OF HOSPITAL KITCHEN AT RINPAS, RANCHI

Amount

Earth Work in excavation in Foundation Trenches in Ordinary soil (vide classification of soil item -B) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I

Extra for earth work in hard soil as per specification & direction of engineer in charge (Vide classification of soil item B)

Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).

Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer In charge (Mode of measurement compacted volume)

providing designation 75 B brickwork in C M ('1 :6 ) in foundation and Plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing. taxes and royalty all complete as per building specification and direction of E/l.

Providing Designation 100A B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9"x4.5"x3") in cement mortar (1:6) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints,cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing designation 112 mm thick reinforced designation 100 A brick work vuith fly ash lirne brick (FLAG)confirming to lS 12894-1990 (9"x4'5"x3" ) in C.M. ( 1 . 4 ) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specificationand direction of E/|.

Providing and laying in position cement concete of soecified grade excluding the cost of centering and shuttering - All work up tp plinth level 1:4:8 (1 cement :4 coarse sand (Zone -III) :8 graded stone aggregrate 40 mm normial size)

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse send : 6 graded stone aggregate 20 mm nominal size ) over 75 mm thick bed of dry brick ballast 40 mm nominal size ,wall rammed and consolidated and grouted with fine sand including necessary excavation, levelling & dressing & finishing the top smooth.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal

Centering and shutteing including struting, propping etc and removal of form for - Foundations, footings, bases for columns, etc for mass concrete

Centering and shutteing including struting, propping etc and removal of form for - Suspended floors, roofs, landings, balconies and access platform

Centering and shutteing including struting, propping etc and removal of form for - Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shutteing including struting, propping etc and removal of form for - Columns, Pillars, Piers, abutments, Posts and struts

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Supplying fitting and fixing glass panes including supplying putty, beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/1.( 5.5 mm thick Glass )

Providing Toe steel reinforcement of 8mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL, TATA Steel, JSPL, Electro Steel Ltd. and Vizal Steel)

Providing Toe steel reinforcement of 10mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL, TATA Steel, JSPL, Electro Steel Ltd. and Vizal Steel)

Providing Toe steel reinforcement of 12mm to 20mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL, TATA Steel, JSPL, Electro Steel Ltd. and Vizal Steel)

Supplying,frtting and fixing M.S. grill made of 20x6cmm M.S. flat as per approved design and drawing, properly fabrlcated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/1Wt @ 7Kg / sqm

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete..

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.

Providing and laying 25mm. thick kotah stone slab flooring of approved size, texture and colour over 19 mm thick base of lime morter (1:l:1) ( Lime putty : surkhi: coarse sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to granolithic finish with approved quailty of carborandum stone including cost of curring, taxes and royalty all complete as per building specification direction of E/I. 600x600mm Size.

Providing and laying 25mm. thick kotah stone riser of steps, skirting and pillers of approved size, texture and colour over 12 mm thick cement morter (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to granolithic finish with approved quailty of carborandum stone including cost of curring, taxes and royalty all complete as per building specification direction of E/I. 600x600mm Size.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Provinding two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine snad paper, applying putty wherever required, scaffolding -do-

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification)

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Water proofrng for Old and New Roof Slab :- Providing and laying water prooflng treatment on roof slab by applying two Component, factory a designed ready to use, acrylic modified flexible material applied with brush, roller or spray waterproofi ng coating as per manufacturer specification-With following steps :-

(a)surface preparation :-Provrding and cleaning of concrete surface to remove dust, oil, grease including removal of existing loose paint / coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. On identification of seepage, cement grouting to be done with non shrink expanding admixture of Sika lndia Pvt.Ltd.

/ MYK Schomberg / Dr Fixit/Fosroc or equrivallent. Providing and reparing of all corners and joints such as those between the parapet wall and the roof slab etc shall be chamfered with '150mm X '150 mm fillet of mortar (Cement: sand - 1:4) admixed with acrylic polymer of Sika/ Fosroc/MYK Schomberg/Dr Fixit or equivalent Before chamfering a prime coat shall be given with the slurry of acrylic polymer Repairing surface irregularities, damaged concretein base slab, dead cracks if any, with an acrylic polymer modified repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete.

(b)1st Coat :- Apply 1st coat of two component acrylic modified, ready to use, flexible cementitious material on surface saturated dry roof and inside wall of Parapet wall upto 600 mm by brush or roller. After 1st coat of application ,45 gsm oI Fibre glass cloth to lay when the first layer is still green. 1st coat should be applied @1.50 kg/Sqmt/coat For the purpose of measurernent tte entire treated surface will be measured."

(c) :2nd Coat:- To apply the 2nd coat of two component acrylic modified,ready to-use, flexible cementitious material right angle to the '1st coat over the glass fibre laid surface. 2nd coat should be applied @0.7 kg/ Sqmt/coat. For the purpose of measurement the entire treated surface will be measured." Alter three days of drying the 2nd coal , the rain water outles to be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectification lo be done as per satisfation of E/c.

The Watqrproofing Brand:*Sika Topseal 109hi / Fosroc Brushbond RFX/ Dr Fixit Pidiffin 2Kl MYK Aqraiin TG Product Performance - Chemical Base Part A.Acrylic copol;,mer, Part 13 Specially graded cementitious powder -Density 1.6 kg/l (mixed density) at +270C Tensile Strength -2 N/mm2 after 28 Days (with Fibre cloth) (According to ASTM D 2370)Pullout Bond Strenth-2 n/mm2 (concrete failure) (According to ISO.

4624) Slant-Shear Bond Strength -4 N/mm2 (According to FIP 5.15) Elongation at Break -35% without Fibre Cloth and 20% wilh Fibre Cloth (According to ASTM D 2370)

D Protection of treated with pcc :- The treated surface shourd be covered with 25mm/50mm PCC of M-20 grade(1:1.5:3) with proper slope ( 1:120) towards the rain outlets in alternatepanels of 2 mtx2mt keeping 6 mm gap between the panel joint. integral water proofing admixture conforming to lS 2645 @ of 100 ml perbag of of cement to be added in the screed concrete (paid separately for thts ltems

all corners shall be charfered with 150mm X 150 mm fillet. The rain water outlets shall be just leveled with the screed concrete to ensure smooth discharge of water - the peripheral gaps between pvc pipe outlet and concrete surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insensitive epoxy putty of Sika lndia Pvt.Ltd / IVIYK Schomberg / Dr FixiUFosroc .For the purpose of measurement the entire treated surface will be measured."

(e)Groove of PCC surface should be filled with Polysulphide Sealant (Paid Separately) Brand - Sika lndia Pvt Ltd / MYK Schomberg / Dr Fixit/Fosroc

Covering of treated surface wrth PCC :- Providing 25 mm thick Cement Concrete M20 (1:1.5:3) raintaining slope in alternate 2 mIx 2 mt panels with aaproved quality of stone chips of 20 mm to 6 mm size graded and clcaned sand of F M 2 5 io 3 including screening,shuttering,and mixing cerite nt c0ncrete in mixer with admixture of integral water proofing and placing rn position,strikirrg cLrring,t-a]glgnd royality all complete as per buildirrg specifictionJand direction of E/l.Panels that has been left should be casteci nextday.-lhere should be 6 mm gap between Panels.Brand- Sika *Plastocrate plus,MYK proof WP10, Fosroc- Conplast X421ic , Dr Frx,t Prdiproof LWr

Provrding and filling of Groove between 25 mm PCC Panels with Polyshlphide Sealant (Poring Grade)as per drawings and technical specifications and dii-ection of E in Charge (with 1B% GST).Brand:-Sika- Polysulphide, Fosroc-l-hioflex 600 Dr. Fixit Pidiseal PS(42P),MYK Seal PS or Euivallent

Extra for providing & placing in position 2 no 6mm dia ms bar every 3rd corse of half brick masonary

Providing and fixing granite 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for flooring, kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 SQM

Providing edge moulding to 18 mm thick marble/granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade

Providing and laying 1st quality Ceramic glazed wall tiles thickness to be specified by the manufacturer) in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing polishing and cost of curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :( 50x20mm)

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.10.6.3 80x0.90 mm M.S. laths with 0.90 mm thick top cover

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.female & Male washroom

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design 75x75 mm deep chase

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Finishing walls with Acrylic Smooth exterior paint of required shade,New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately):Powder coated aluminium (minimum thickness of powder coating 50 micron)For fixed portion @ 6KG/SQM

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)For opnable portion @ 6KG/SQM

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windowsshutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge.Pre-laminated particle board with decorative lamination on both sidescoating 50 micron)

CARRAIGE OF MATERIALS

SAND (UPTO 10KM LEAD)

CHIPS (UPTO 22KM LEAD)

BRICKS (UPTO 8KM LEAD)

Providing and fixing male ended 15 mm dia brass bib cock of approved quality ( wt not less than 350 gms ) with extra socket all complete as per specification and direction of E/l .

Providing and fixing 15 mm dia male ended C.I .Body brass spindle valve and seat bib cock of approved quality (wt not less than 400 gms ) with extra socket all complete as per specification and direction of E/l .

Providing and fixing brass / C.I. Stop cock of approved quality all complete as per specification and direction of E/l .A) BRASS STOP COCK

(a) 15 mm dia

(b) 20 mm dia

Providing and fixing 15 mm dia and 45 cm. long P. V .C connection pipe with heavy quality brass coupling at both ends etc. all complete as per specification and direction of E/l .

Providing and fixing 15mm size C.P brass pillar cock (Weight not less than 350 gms) C.I body brass spindle pillar cock of approved quality as per spcification and direction of E/l. (b) C.I. body brass spindle

Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/l

(c) 25 mm dia wt not less than 500 gms

(d) 32 mm dia wt not less than 700 gms

(e) 40 mm dia wt not less than 1kg

(f) 50 mm dia wt not less than 1.5 kg

Cutting drain width wise above G.L for laying G.I pipes and restoring with brick in cement mortar (1:4) 12mm cement plaster in (1:4) with neat cement punning as per specification and direction of E/l

Cutting chajja or cornice for laying G.I pipe and restoring the same with R.C.C (1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of E/l.

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l.

1) 600 x 125 mm glass shelf complete

(b) Mirrors of 6 mm thick plate glass bevelled edge mirror including C.P brass revolving fittings, 3 mm plywood board and C P hinges to fix with mirror - (1)600x450 mm size

(2) C.P brass shop dish container medium quality with screw and hinges etc.

(3) C.P brass liquid shop container

Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l. (B) 510 mm long - (a) with 15.0 lit high level C.I cistern

Making holes in wall for laying H.C.I, pipe and restoring the same after pipe laying as per specification and direction of E/l. (i) 125 mm dia

Excavating trenches of required width for pipe, cables etc including excavation for sockets ,& dressing of sides ,ramming of bottoms ,depth upto 1.5m including getting out the excavated soil,& then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming ,watering, etc and disposing of surplus excavated soil as directed, within lead of 50m. Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre).

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10mm gap for thermal expansion. 110mm dia

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10mm gap for thermal expansion.

Coupler 110 mm dia

Single Tee with door 110x110x110 mm

Bend 87.5 deg 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10mm gap for thermal expansion.Shoe (Plain) 110 mm Shoe

Providing and fixing unplasticised- PVC pipe clip of approved desing to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwes with M.S. Screw of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 Cement : 4 Coarse sand ) and making good the wall etc. complete.110mm dia

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighting not less than 440 grams.

Providing and fixing wash basin with CI brackets,15mm brass pillar taps,32mm CP brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever required.White vitreous china wash basin size 630 mm x 450 mm with a single 15mm CP brass pillar tap.

Providing and fixing white vitreous china battery based infrared sensor operated urinal of appx.size 610x390x370mm having pre & post flushing with water (250ml & 500ml consumption) having water inlet from back side,including fixing to wall with suitable brackets all as per manufacturers specification & direction of Engineer-in charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink with drain board510x1040 mm bowl depth 250 mm

Kitchen sink without drain board610x510 mm bowl depth 200 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

32 mm dia

40 mm dia

Providing and fixing toilet paper holder :C.P. brass

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Preoviding and fixing white viterious china battery based infrared sensor urinar approx size 610*390*370 having pre & post flushing with water 250 ml& 500 ml consumption

Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 grams with threaded end for hose connection.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. Internal Work - Exposed on Wall

15 mm nominal outer dia pipes.

20 mm nominal outer dia pipes.

25 mm nominal outer dia pipes.

32 mm nominal outer dia pipes.

40 mm nominal outer dia pipes.

50 mm nominal outer dia pipes.

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of engineer in charge. Concealed work including cutting chases and making good the walls etc.

15 mm nominal outer dia pipes.

20 mm nominal outer dia pipes.

25 mm nominal outer dia pipes.

32 mm nominal outer dia pipes.

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings. This including jointing of pipes & fittings with one step CPVC solvent cement , trenching, refilling & testing of joints complete as per direction of Engineer in charge.External work. 32 mm nominal outer dia pipes.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore

Fixing water meter and stop cock in G.I pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

20 mm nominal bore

32 mm nominal bore.

40 mm nominal bore

50 mm nominal bore

65 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and fixing gun metal non- return valve of approved quality (screwed end).

50 mm dia nominal bore-vertical

65 mm dia nominal bore-vertical

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),i/c necessary excavation foundation concrete 1:5:10 (1 Cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 Cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design: a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore.

40 mm nominal bore

Providing and fixing C.P. bass angle valve for basin mixer and geyser points of approved quality conforming to I.S:8931.15 mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT grating of approved quality and colour.100 mm nominal dia

Rectangular type with openable circular lid 150 mm nominal size square 100 mm-diameter of the inner hinged round grating

Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand) including testing of joints etc. complete.

150 mm. dia. RCC Pipes

250 mm. dia. RCC Pipes

Construction brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra for depth for manholes Size 90x80 cmWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing square mouth SW gully trap class SP-1 complete CI grating brick masonry chamber and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.7 kg. as per standard design.100x100mm size P type With common burnt clay F.P.S (non modular) bricks of class designation 7.5.

Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 mWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing position pre cast rcc manhole cover and frame required shape & approved qualityCircular shape 560 mm internal dia

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Supplying and fixing C.I. cover without frame for manholes: 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg.

Constructing brick masonry road gully chamber 50 X 45 X 60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500 X 450 mm precast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class "O") insulation on duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.19 mm Thick

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.300 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.200 mm nominal size dia

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin-charge.

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm dia

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia

Supplying of following 1100 volt grade XLPE insulated PVC sheathed aluminium / Copper conductor armoured cables as per specification as required. PVC/ XLPE insulated PVC sheathed heavy duty, armoured electrical cables with Aluminium conductor for working voltage upto and including 1100volts ( conforms to IS:1554, Part-1)

3.1/2 core 95sq. mm.

4 core 10 sq. mm.

Wiring in existing conduit - Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required.

2x1.5 sq mm

2x2.5 sq mm

S/F Modular type switch socket - Supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required

S.P 5/6 amps, one way modular switch, ISI Marked

S.P 15/16 amps, one way modular switch, ISI Marked

5 pin 5/6 amps, modular socket Outlet, ISI Marked

6 pin 15/16 amps, modular socket Outlet, ISI Marked

Supply and fixing of step type electronic fan regulator on existing modular plate switch box including connection but excluding modular plate etc as required.

Supply & fixing of 1 or 2 module GI box along with modular base & cover plate of modular switches in recess etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in Front on surface or in recess ,including providing and fixing 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch,connection, painting etc.as required.

Supplying and fixing suitable size GI box with modular plate and cover in Front on surface or in recess ,including providing and fixing 6 pin 15 / 16 modular socket outlet and 15 / 16 amps modular switch,connection,painting etc.as required.

Installation of exhaust up to 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125A 16KA fixed thermal setting

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator) 8 way Double Door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way Double Door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) asrequired . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way Double Door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. asrequired.

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 amps “C” curve, TP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Earthing with G.I. Earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. ( with charcoal or coke and salt).

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

S/L 25x6mm G.I. earth strip in ground: Proving and laying earth connection from earth electrode with 25x6mm G.I wire in 15mm GI pipe from electrode as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required upto 35 sqmm to 95 sqmm(clamped with 1MM thick sadle )

Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

SITC of following ratings RECCESS /SURFACE MOUNTED LED ROUND / SQUIRE SHAPE DOWN LIGHT liminiaire with pressure dia cast housing FOR SINLE PHASE supply voltage luminaire shall be confirm to IS 10322 Part 3 section 2 or IEC 6-7 22 with all necessary accessory item required .

12w LED SQUARE DOWNLIGHT

2'x2' LED PANEL LIGHT

Supply insttalation , testing and commisioning of following size ceiling fan 3 balde confirming to IS : 374:2019 incuding wiring thedown roads of standed lenth ( upto 30 cm ) with 1.5 sqmm PR PVC, insulated copper wire suitable for 230V 50Hz single phase supply etc. compleyte as required. 1200mm (48 Degree) BLDC 5 star rating 32W ceiling fan

SITC of following ratings SURFACE MOUNTED LED tube light fitting, suitable for 230V 50Hz, single phase supply etc. complete as required.

10/12W LED Tube light

20/22W LED Tube light

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

20mm dia

25mm dia

Extra for fixing the louvers/ shutters complete with Frame for a exhaust fan of all sizes

Extra for fixing the louvers/ shutters complete with Frame for a exhaust fan of all sizes

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. (Powder coated shall be of Siemens Grey Colour- RAL 7032) 100mm width X 50mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation no more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts,painting suspenders etc as required

150 mm wide x 50 mm depth x 1.6 mm thickness

300 mm wide x 50 mm depth x 1.6 mm thickness

Pdg.and fixing 25 x 5 mm G.I. strip along with Cable Tray as required.

Pdg. & fixing 6 SWG GI wire on surface or in recess , along with the exiting cable for loop earthing Including connection etc as required.

Supplying and making end termination of following sizes with brass compression gland including providing and crimping solderless plugs/ferrules of sizes PVC insulated PVC sheathed aluminum conductor armoured cable 1.1 KV grade.

3.1/2 core 95sq. mm.

4 core 10sq. mm.

Two Loop Panel

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of addressable fire control module complete as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supply, fabrication, installation and testing of G.S.S. sheet metal ducting complete with Spliter Damper, vanes as required & as per specifications & as per approved shop drawings.

NON-SCHEDULE ITEMS Hermetically Sealed Sliding Door System: Fabrication, Supply, installation, testing & commissioning of sliding type Hermetically Sealed door having high density particle board cores/ CFC free Polyurethane, high pressure laminate face on both sides, viewing window 300 x 300mm. Size: 1500 x 2100 mm (W x H) as per direction of EIC. Automatic Doors: Provided with Radar Switch - 2 Nos., Foot Switch - 2 Nos. and Photocell Sensors. Automatic Door (1500 mm x 2100 mm) Approved makes - Metaflex /REBBON / MDD Engineering/ Altos / Dormed/ Meditech

Providing fixing, testing and commissioning in position SWR PVC PIPE TYPE-B pipe comforming to IS:13592 including all fittings such as bends, junctions, inspection doors, offests, cowl, access pieces/clean out plugs, clamps /supports/ hangers etc. jointing with PVC Adhesive joints including cutting holes in walls, core cutting in slabs and making good the same. all complete as per specification and direction of E/l.

(a) 250 mm dia

(a) 150 mm dia

(c) 100 mm dia

(e) 50 mm dia

Providing & fixing in position uPVC P"or S" trap of self cleaning design of following sizes for the embedded areas. Making proper connection with drip-seal joints, cutting chase / hole in floors /slabs and bringing the same in proper condition in cement concrete 1:2:4 mix complete as required. including cost of cutting and making good the walls and floors where required.

3 x 50 mm inlet and 100 mm outlet (Multi Floor Trap)

50 mm outlet (Floor Drain)

Providing & fixing in position storage type hot water electrical geyser (vertical or horizontal-2.0 kw) including making connection in all respects.-Venus/Racold make.

15 litres capacity (Make: AO Smith)

25 litres capacity (Make: AO Smith)

Supply installation testing and commissioning R.O.water purifier comprising 5 micron filter and UV steriliser on cold water supply to work on single phase 230 volts 50 HZ AC power supply with capacity 100 lph.-Kent/approved equal make.

Fixing of Wall Mounted C.P. Brass Single lever Sink Mixer with swinging spout of required size including cuttinig and making good the wall wherever required. (Make: Jaquar Sink Mixer CQT-23309)

Providing & fixing C.P. hand spray with lever control (health faucet) and flexible hose 1 m long connection with C.P. holder for hand spray complete in all respects as per direction of Engineer-Incharge. (Make: Jaquar, Hand Shower (Health Faucet) ALD-CHR-573 )

Providing & fixing chinaware urinal partition of 160X 400X 825 mm with fixed with expandable anchor fasteners with C.P. brass bolts and washers, embedded in wall with anchor and set in cement concrete complete including cutting and making good the walls wherever required (Make: Parryware, white C0507 Large)

Providing & fixing soild state no touch operating fully highgenic SS hand drier of best quality, to be operated with 230 volts, single phase, with fully hygienic condition, with all accessories including cutting and making good the walls, wherever required. (Make:- Euronics, Stainless Steel Hand Dryer EH21)

Fixing of conceated divertor set comprising of C.P Wall mixer concealed in wall, wall sport, overhead shower head with C.P shower arm with swivel joint, C.P brass wall Flange complete including cutting and making good the wall whereever required. Providing and fixing C.P. brass twin coat hooks fixed on toilet door with including CP brass screws, washers rawl plugh etc. complete in all respact. (Make: Jaquar, ACN-SSF-1161N)

Supplying and fixing 100 mm dia SWR PVC End Cap (Clean Outlet Plug) fittings of approved make. all complete as per specification and direction of E/l.

Providing & fixing horizontal centrifugal pumps for domestic water lifting with CI casing bronze impeller suitable for operation on 400 / 440 V pH 50 cycle A/C power supply.Cost shall include electrical control panel (star/dol starter) with all controls to make the pumps to operate automaticaly.Sequencing shall be provided for the pumps.Pumps shall start /stop automatically depanding upon water level in overhead tank. Domestic water Pumps, Location - Inside pump room, ' Capacity 3 LPS each, Head -15 Mts , RPM - 2900, HP(appx) - 5.0, Pumps & associated works as described above

Providing & fixing horizontal centrifugal pumps for flushing water lifting with CI casing bronze impeller suitable for operation on 400 / 440 V pH 50 cycle A/C power supply.Cost shall include electrical control panel (star/dol starter) with all controls to make the pumps to operate automaticaly.Sequencing shall be provided for the pumps.Pumps shall start /stop automatically depanding upon water level in overhead tank. Flushing water lifting Pumps, Location - Inside pump room, ' Capacity 2 LPS each, ' Head -20 Mts, RPM - 2900, HP(appx) - 5.0, Pumps & associated works as described above

SITC OF 3 pin 240 volt 16 amp single phase and neutral outlets and including providing and fixing of a 3 pin 240 volt 16 amp industrial socket (IP 65) with 16 amp 'B' curve SPN MCB with plug top complete as required,

SITC OF 3 pin 240 volt 25/32 amp single phase and neutral outlets and including providing and fixing of a 3 pin 240 volt 16 amp industrial socket (IP 65) with 16 amp 'B' curve SPN MCB with plug top complete as required,

SITC OF 6 pin 240 volt 25/32 amp single phase and neutral outlets and including providing and fixing of a 3 pin 240 volt 16 amp industrial socket (IP 65) with 25/32 amp 'B' curve TPN MCB with plug top complete as required,

SITC OF 6 pin 240 volt 40/63 amp single phase and neutral outlets and including providing and fixing of a 3 pin 240 volt 16 amp industrial socket (IP 65) with 40/63amp 'B' curve TPN MCB with plug top complete as required,

20A, 3 pin socket outlet controlled by 20A 2P RCCB

Supply, installation, testing & commissioning of factory fabricated Air-washer comprising of 1 No. DIDW GI fan, forward curved, complete with base frame, casing made out of 18G galvanised sheet having flanged and bolted panels insulated with TF quality expanded polystyrene, wet section & tank shall be made of stainless steel. The Air-washer shall be complete with fill of depth 200 mm & face velocity across the fill shall be limited to 152 MPM. The complete Air-washer shall be as specified in the tender document & Schedule of Equipments section.The Air - washer shall have an efficiency of 90% & shall be complete with motor , belt drive package, GI B Class interconnecting piping Aluminum viscous filters etc. & of the following capacities. The airwasher shall be complete with 02 Nos. water circulation pumps including one no. stand by pump.

AWS - 21500 CFM - For Kitchen Ventilation - Ground Floor, (1 x 20 H.P Fan Motor, 100 mm St. Pressure, 2 x 1.0 HP, Water Circulation Pumps, 01 No. standby)

AWS - 2000 CFM - For Kitchen Ventilation - Ground Floor, (1 x 3.7 H.P Fan Motor, 65 mm St. Pressure, 2 x 0.25 HP, Water Circulation Pumps, 01 No. standby)

Supply, installation, testing & commissioning of factory fabricated Kitchen Scrubber comprising of 1 No. SISW fan, Backward curved, complete with base frame, casing made out of 18G galvanised sheet having flanged and bolted panels,. The capacity of scrubber shall be as given below:- Air Qty. = 23500 CFM, No Of Fan For = 1, Fan Dia= 1000 mm (Approx.), Static Pressure = 75 mm Wg, Fan Speed = Not exceeding 1000 rpm, Motor = Not exceeding 20.0 HP Each, Noise level = db 70

Supply, installation, testing & commissioning of factory fabricated Kitchen Scrubber comprising of base frame, casing made out of 18G galvanised sheet having flanged and bolted panels, wet section & tank shall be made of stainless steel. The unit shall be complete made of stainless steel. The unit shall be complete Rigid Media to act as the first stage of scrubber to be sprayed by water through wide angle nozzles another sprayed by water through wide angle nozzles another will act as the cleaning media for the smoke and smell & will be designed @ 2.5 m/s to give 90% adiabatic efficiency, motor, belt drive package, piping, 2 Nos. pumps including one no. standby, 30-micron aluminum wire mesh filters etc. The capacity of scrubber shall be as given below:- (Recirculating Pump shall be three Phase supply) Air Qty. = 21500 CFM , Monoblock Pump = 1.0 HP, No. Of Pumps = 2 (1 No. Standby)

Supply, installation, testing and commissioning of factory fabricated Single Skinned Fan section unit horizontal type fabricated out of extruded aluminium section consisting with 0.6mm pre-plasticized/pre-coated Galvanised steel sheet outside & 0.6 mm plain alvanised steel blower section and Blower shall be SISW Backward Curved blade from and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply The Fan section shall be insulated with 23 mm thick & 36 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete Fan section shall conform to standard specification. 1850 CFM Exhaust Fan section , 30 mm SP

Supply, installation & testing of Duct / Wall mounted GI Fire Dampers actuated with the help of 24 V electric actuator and as per specifications excluding actuator inclusive of interconnection with Control Cable to Potential Free Contact in Fire Alarm Panel ( Free Contact Panel to be Provided by fire Alarm Contractor)

Supply, installation and testing of Motorised Spring Return Actuator for devices upto 0.8 sq. metre with with control panel & temperature sensor.

Double louvered supply / return air registers (Grills) with front louvers ( angle 35 deg ) fixed horizontal and rear louvers verticle adjustable.

Volume Control Dampers to be provided in supply air registers / terminals & Ducts.

Electrical Sub Panel for Fan section up To 15 HP Motor

Supply, installation, testing & commissioning of Inline Fan with completee electrical fitting & cabel etc,

Electrical Sub Panel For AWS ( Kitchen Ventilation )

POWER & CONTROL CABLING - Supply, laying, testing and commissioning of power and control cabling, as per Standard specification including end termination as required.Power Cabling (XLPE) insulated and PVC sheathed, armoured, Aluminium Conductor of 1.1 KV grade on cable trays). For Equipment

3C x 6 Sq. mm

3C x 10 Sq. mm

3C x 16 Sq. mm

Control Cabling ( PVC insulated and PVC sheathed, armoured, Copper Conductor of 1.1 KV grade on existing cable trays). 5C x 1.5 Sq. mm

Supply & laying of rubber mat of size 900 mm & 12 mm thick

Kitchen Signage -Laser Cut Acrylic Letters with Stain less Steel sides along with Korean Led Lights, Letters will be fixed over the Structure made.8 Feet by 4 Feet

Door Signage for all the Doors on the Floor -Laser Cut 5 mm Acrylic Signage with Plotter Cut Vinyl letters pasted above & Desired color vinyl pasted on Back 4 Inch18 Inch by

DIRECTIONAL / HANGING Signage-Laser Cut 5 mm Acrylic in desired color with Plotter Cut Vinyl Letter Double Side as required 4 Feet by 2 Feet

Three sink unit Supply , Installation, Testing and Commissioning of inlet table with 3 Sink Bowl size of 2100X750X850+150 mm.The work top should be SS 16 SWG and an under construction of 3 nos. Sink, Size of 450x450x250mm 16 Gauge SS. 304 grade Sink fitted as per the layout, Complete with faucet, 50mm dia lever handle operated waste outlet & rear connected overflow & welded to 40x40x4mm SS angle frame supported on 16 SWG. The legs should be of 38mm dia SS 304 grade legswith adjustable nylon bullet feet. 25mm Dia SS 304 grade pipe cross bracing welded to legs at Rear & both sides. Front of Sink to have 20 Gauge SS clading

S.S. GRATING Dimension-1000X300X70

SORTING TABLE Supply , Installation, Testing and Commissioning of Sorting table of size 2300X750X850+150mm . The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work. The welded joints should be ground smooth and polished all directed by EIC. Dimension-2300X750X850+150

Supply , Installation, Testing and Commissioning of Hand Wash basin of size 450x500x200+150mm. Hand wash basin shall be wall mounted, SS construction, knee operated hot & cold water faucet, with all necessary accessories including soap dispenser, paper dispenser. Hand wash basin shall be fixed as per drawing or directed by EIC Dimension-450X500X200+150

Supply , Installation, Testing and Commissioning of Walk in Chiller of size 3000x2000x2600 (inside) as per approved make list. Walk in chiller shall have 100mm thick polyurethane panel-wall, floor and top, with air cooled condenser with thematically heated doors also having panic alarm above cold room, checkered plate on floor. Frighabon evaporator. Walk in chiller shall be installed as per drawing or directed by EIC .

Supply, Installation ,Testing and Commissioning of Walk in freezer of size 3000x1500x2600 (inside) as per approved make list. Walk in chiller shall have 100mm thick polyurethane panel-wall, floor and top, with air cooled condenser with thematically heated doors also having panic alarm above cold room, checkered plate on floor. Frighabon evaporator. Walk in freezer shall be installed as per drawing or directed by EIC. Make-Blue Star / Preserve / Carrier

WEIGHING SCALE- PLATFORM Supply , Installation, Testing and Commissioning of Platform scale size of 1039x727 as per approved make list . Platform scale shall have SS Platform of size 750 x 750 mm with a digital instrument panel connected on a vertical stand with a backlit display (Minimum calibration 50 grams). It shall be provided with a 5 Amp. Power cord of minimum 1½ meter length having a battery backup. The Weighing Scale should be approved by Weights & Measures Department. Platform scale shall be fixed as per drawing or directed by EIC. Capacity-300 Kg Make-Avery / Essae / Satwik

Supply , Installation, Testing and Commissioning of Platform Trolley of size 975X600X900mm as per sample approved by Architect /EIC. Platform trolley shall have 100kg capacity. It shall be provided with 4 castors and handle. Platform trolley shall be made of 16 SWG SS 304 grade. Handle frame to be made of 25 mm Ø round tubing. Under construction shall be of Stainless Steel with 150 mm Ø, noise free rubber castors to be provided with 2 Nos. wheels shall have a locking arrangement. Other details as per Manufacturers specifications. Platform scale shall be installed as per drawing or directed by EIC.

SS PALLETS Dimension-900X600X150

STORAGE RACK Dimension-900X500X1800 Make-JD / Metro METROMAXQ / Hupfer Norm 12

Supply , Installation, Testing and Commissioning of work table with sink of size 1600x700x850mm with backsplash of 150 mm.The work top should be SS 16 SWG and an under construction of 450x450x250mm One (1) no. 16 Gauge SS. 304 grade Sink fitted as per the layout, Complete with faucet, 50mm dia lever handle operated waste outlet & rear connected overflow & welded to 40x40x4mm SS angle frame supported on 16 SWG. The legs should be of 38mm dia SS 304 grade legswith adjustable nylon bullet feet. 25mm Dia SS 304 grade pipe cross bracing welded to legs at Rear & both sides. Front of Sink to have 20 Gauge SS clading

FOUR BURNER RANGE MAKE-RM GASTRO SP 90/80 G / MKN OPTIMA 850 / CASTA Dimension-800X900X850+150(MODULAR)

SPREADER TABLE MAKE-RM GASTRO / MKN / ELECTROLUX / CASTA Dimension-500X900X850+150(MODULAR)

FOUR BURNER RANGE WITH ELECTRIC OVEN MAKE-RM GASTRO SPT 90/80 11 GE / MKN OPTIMA 850 / CASTA Dimension-800X900X850+150(MODULAR)

S.S. GRATING Dimension-1200X350X70

STORAGE RACK Dimension-900X500X1800 Make-JD / Metro METROMAXQ / Hupfer Norm 12

S.S. GRATING Dimension-750X350X70

PULVERISER Capacity-5 HP Make-Cosmos / KEI / Rishab (MODULAR)

WET GRINDER Make-Cosmos / KEI / Rishab Capacity-15 Ltrs.(MODULAR)

S.S. GRATING 350X350X70

SOAK SINK Supply , Installation, Testing and Commissioning Soak Sink is to be constructed by 16 gauge 304 Stainless steel,16 gauge sink of 600x600x300mm deep with 38mm dia drain coupling, mounted on 40x40x4mm thick s/s angle frame work with (4) no. 100mm dia Non marking rubberized castors two with brakes. Dimension-600X600X600

ONION / POTATO BIN Providing and placing Bin unit size of 750x750x1350mm is to be constructed by stainless steel wires on 1” SS angles. Unit is mounted on 150 mm dia castor wheels branded make. Top of the unit to have doors with handles. Bin to have one out pouring sliding shutter to extract Potato / Onion.

S.S. GRATING Dimension-550X550X70

FLUSHING HOSE REEL size-10.5 Mtrs Make-T&S / 5HR-242-01 / KLARCO(MODULAR)

Supply , Installation, Testing and Commissioning of Work table with garbage shute size 2600x700x850+150. The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. The welded joints should be ground smooth and polished all directed by EIC.

S.S. GRATING Size-1200X350X70

Supply , Installation, Testing and Commissioning of Hand Wash basin of size 450x500x200+150mm. Hand wash basin shall be wall mounted, SS construction, knee operated hot & cold water faucet, with all necessary accessories including soap dispenser, paper dispenser. Hand wash basin shall be fixed as per drawing or directed by EIC .

S.S. GRATING Size-1000X350X70

S.S. GRATING

DOUBLE PLENUM ISLAND SS EXHAUST HOOD WITH FRESH AIR PLEANUM Size-7800X2700X500 Make-SSS V-JET STEAM / SPLENOR SPL-PRIMA PLUS / HALTON KVF (MODULAR)

S.S. GRATING Size-1000X500X150

Supply , Installation, Testing and Commissioning of work table with sink of size 1500X700X850mm with backsplash of 150 mm.The work top should be SS 16 SWG and an under construction of 450x450x250mm One (1) no. 16 Gauge SS. 304 grade Sink fitted as per the layout, Complete with faucet, 50mm dia lever handle operated waste outlet & rear connected overflow & welded to 40x40x4mm SS angle frame supported on 16 SWG. The legs should be of 38mm dia SS 304 grade legswith adjustable nylon bullet feet. 25mm Dia SS 304 grade pipe cross bracing welded to legs at Rear & both sides. Front of Sink to have 20 Gauge SS clading

Supply , Installation ,Testing and Commissioning of work table of size 1500X700X850 The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work. The welded joints should be ground smooth and polished all directed by EIC.

SINK TABLE (SINK RHS) Supply , Installation, Testing and Commissioning of work table with sink of size 1500X700X850mm with backsplash of 150 mm.The work top should be SS 16 SWG and an under construction of 450x450x250mm One (1) no. 16 Gauge SS. 304 grade Sink fitted as per the layout, Complete with faucet, 50mm dia lever handle operated waste outlet & rear connected overflow & welded to 40x40x4mm SS angle frame supported on 16 SWG. The legs should be of 38mm dia SS 304 grade legswith adjustable nylon bullet feet. 25mm Dia SS 304 grade pipe cross bracing welded to legs at Rear & both sides. Front of Sink to have 20 Gauge SS clading

WORK TABLE W/SINK (SINK LHS) Supply , Installation, Testing and Commissioning of work table with sink of size 1500X700X850mm with backsplash of 150 mm.The work top should be SS 16 SWG and an under construction of 450x450x250mm One (1) no. 16 Gauge SS. 304 grade Sink fitted as per the layout, Complete with faucet, 50mm dia lever handle operated waste outlet & rear connected overflow & welded to 40x40x4mm SS angle frame supported on 16 SWG. The legs should be of 38mm dia SS 304 grade legswith adjustable nylon bullet feet. 25mm Dia SS 304 grade pipe cross bracing welded to legs at Rear & both sides. Front of Sink to have 20 Gauge SS clading

Supply , Installation ,Testing and Commissioning of work table of size 1800X700X850+150 The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work. The welded joints should be ground smooth and polished all directed by EIC.

Supply , Installation ,Testing and Commissioning of work table of size 1500X700X850+150.The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work. The welded joints should be ground smooth and polished all directed by EIC.

Supply , Installation, Testing and Commissioning of work table with sink of size 1500X700X850mm with backsplash of 150 mm.The work top should be SS 16 SWG and an under construction of 450x450x250mm One (1) no. 16 Gauge SS. 304 grade Sink fitted as per the layout, Complete with faucet, 50mm dia lever handle operated waste outlet & rear connected overflow & welded to 40x40x4mm SS angle frame supported on 16 SWG. The legs should be of 38mm dia SS 304 grade legswith adjustable nylon bullet feet. 25mm Dia SS 304 grade pipe cross bracing welded to legs at Rear & both sides. Front of Sink to have 20 Gauge SS clading

FOUR BURNER RANGE- GAS OPERATED Size-800X900X850+150 Make-RM GASTRO SP 90/80 G / MKN MODEL OPTIMA 850 / ELECTROLUX MODEL. 900 XP / CASTA (MODULAR)

WORKING CABINET WITH 2 NOS. DRAWER Size-800x900x850+150 Make-RM GASTRO / MKN/ CASTA / ELETROLUX (MODULAR)

S.S. GRATING Size-1200X350X70

DOUBLE PLENUM SS EXHAUST HOOD WITH FRESH AIR PLEANUM Size-2100X1350X600 Make-SSS V-JET STEAM / SPLENOR SPL-PRIMA PLUS / HALTON KVF (MODULAR)

HOT FOOD TROLLEY Capacity-1/1x20 GN Make-Alto-Shaam 1000-BQ2/96 / Splenor SPL-HFC-20/ Rieber BKW-121-115 / Scan-Box (MODULAR)

Supply , Installation ,Testing and Commissioning of Spreader table of size 1500X700X850+150.The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work.

Supply , Installation ,Testing and Commissioning of Wall Shelf of size 1500x350mm as per drawing or directed by EIC. Wall shelf shall be single tier and installed with wall bracket. Wall shelf should be made of 18 swg SS sheet with 38mm double upbeeding on 3 sides and double beaded downwards at front, duly secured with 16 swg SS wall brackets..Wall shelf shall be fixed as per drawing or directed by EIC.

Supply , Installation ,Testing and Commissioning of Wall Shelf of size 1800X350mm as per drawing or directed by EIC. Wall shelf shall be single tier and installed with wall bracket. Wall shelf should be made of 18 swg SS sheet with 38mm double upbeeding on 3 sides and double beaded downwards at front, duly secured with 16 swg SS wall brackets..Wall shelf shall be fixed as per drawing or directed by EIC.

Supply , Installation, Testing and Commissioning of work table with sink of size 1500X700X850mm with backsplash of 150 mm.The work top should be SS 16 SWG and an under construction of 450x450x250mm One (1) no. 16 Gauge SS. 304 grade Sink fitted as per the layout, Complete with faucet, 50mm dia lever handle operated waste outlet & rear connected overflow & welded to 40x40x4mm SS angle frame supported on 16 SWG. The legs should be of 38mm dia SS 304 grade legswith adjustable nylon bullet feet. 25mm Dia SS 304 grade pipe cross bracing welded to legs at Rear & both sides. Front of Sink to have 20 Gauge SS clading

Supply , Installation ,Testing and Commissioning of Wall Shelf of size 1500x350mm as per drawing or directed by EIC. Wall shelf shall be single tier and installed with wall bracket. Wall shelf should be made of 18 swg SS sheet with 38mm double upbeeding on 3 sides and double beaded downwards at front, duly secured with 16 swg SS wall brackets..Wall shelf shall be fixed as per drawing or directed by EIC.

Supply , Installation ,Testing and Commissioning of Spreader table of size 1500X700X850+150.The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work.

S.S. GRATING SIZE 550X550X70

FLUSHING HOSE REEL Make-T&S 5HR-242-01 / Klarco (MODULAR)

Supply , Installation, Testing and Commissioning of Hand Wash basin of size 450x500x200+150mm. Hand wash basin shall be wall mounted, SS construction, knee operated hot & cold water faucet, with all necessary accessories including soap dispenser, paper dispenser. Hand wash basin shall be fixed as per drawing or directed by EIC .

Supply , Installation, Testing and Commissioning of Waste Bin of size 400 diameter as per approved make list. It shall be Durable, heavy-duty containers for a variety of uses, All-plastic, profession-grade construction will not rust, chip or peel; resists dents. But-in handles allow easy, non-slip lifting and anti-jam nesting. Double-ribbed base increases stability and dragging capacity. Complying with HACCP guidelines. Complete with lids. It shall have 100 Ltr capacities. Waste bin shall be placed as per drawing or directed by EIC Make-. Nil-Kamal / Sintex

S.S. GRATING Size-900X350X70

GLASS SHELF SIZE-600X600X1800

SOILED POT LANDING TABLE SIZE-1400X700X850+150

Supply , Installation, Testing and Commissioning of Waste Bin of size 400 diameter as per approved make list. It shall be Durable, heavy-duty containers for a variety of uses, All-plastic, profession-grade construction will not rust, chip or peel; resists dents. But-in handles allow easy, non-slip lifting and anti-jam nesting. Double-ribbed base increases stability and dragging capacity. Complying with HACCP guidelines. Complete with lids. It shall have 100 Ltr capacities. Waste bin shall be placed as per drawing or directed by EIC. Make-Nil-Kamal / Sintex

S.S. GRATING SIZE-750X350X70

Supply , Installation ,Testing and Commissioning of Clean pot landing table of size 1250X700X850+150.The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work.

Supply , Installation ,Testing and Commissioning of SS Pot Rack unit made of pipe welded frame structure as per sample approved by Architect /EIC. The uprights should be made of 32 mm Ø x 16 swg SS 304 pipe / legs with adjustable nylon bullet feet. Shelves should be made of 25 mm Ø x 16 swg SS 304 pipe with internal grids of 19 mm Ø x 16 swg SS 304 pipe. The distance between the grids should be 100 mm. The top side of the uprights should be sealed and properly rounded. Each rack will have 3 tiers spaced equidistant from each other, with bottom tier spaced 150 mm above ground level. Shelves shall be fixed as per drawing or directed by EIC.

MIXER FAUCET MAKE-T&S (MODULAR)

PRE-RINSE- SPLASH MOUNTED MAKE-T&S B-133 WITH B-107 / Klarco (MODULAR)

FLUSHING HOSE REEL Make-T&S 5HR-242-01 / Klarco (MODULAR)

S.S. GRATING SIZE-2000X350X70

Supply , Installation, Testing and Commissioning of Hand Wash basin of size 450x500x200+150mm. Hand wash basin shall be wall mounted, SS construction, knee operated hot & cold water faucet, with all necessary accessories including soap dispenser, paper dispenser. Hand wash basin shall be fixed as per drawing or directed by EIC.

Supply , Installation, Testing and Commissioning of inlet table with 2 Sink Bowl size of 1300X700X850+150 mm.The work top should be SS 16 SWG and an under construction of 2 nos. Sink, Size of 450x450x250mm 16 Gauge SS. 304 grade Sink fitted as per the layout, Complete with faucet, 50mm dia lever handle operated waste outlet & rear connected overflow & welded to 40x40x4mm SS angle frame supported on 16 SWG. The legs should be of 38mm dia SS 304 grade legswith adjustable nylon bullet feet. 25mm Dia SS 304 grade pipe cross bracing welded to legs at Rear & both sides. Front of Sink to have 20 Gauge SS clading

S.S. GRATING SIZE-1250X350X70

Supply , Installation ,Testing and Commissioning of work table of size 1500X700X850 The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work. The welded joints should be ground smooth and polished all directed by EIC.

Supply , Installation ,Testing and Commissioning of Wall Shelf of size 1400X350 mm as per drawing or directed by EIC. Wall shelf shall be single tier and installed with wall bracket. Wall shelf should be made of 18 swg SS sheet with 38mm double upbeeding on 3 sides and double beaded downwards at front, duly secured with 16 swg SS wall brackets..Wall shelf shall be fixed as per drawing or directed by EIC.

Supply , Installation ,Testing and Commissioning of work table with schute of size 1100X700X850 The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work. The welded joints should be ground smooth and polished all directed by EIC.

Supply , Installation ,Testing and Commissioning of work table of size 1200X700X850+150 The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work. The welded joints should be ground smooth and polished all directed by EIC.

Supply , Installation ,Testing and Commissioning of work table of size 2000X700X850+150 The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work. The welded joints should be ground smooth and polished all directed by EIC.

Supply , Installation ,Testing and Commissioning of Wall Shelf of size 1800X700 mm as per drawing or directed by EIC. Wall shelf shall be single tier and installed with wall bracket. Wall shelf should be made of 18 swg SS sheet with 38mm double upbeeding on 3 sides and double beaded downwards at front, duly secured with 16 swg SS wall brackets..Wall shelf shall be fixed as per drawing or directed by EIC.

TABLE TOP WEIGHING SCALE CAPACITY-30 Kg Make-Avery / Essae / Satwik

KNIFE SHARPENER Make-Waring WKS 800 / Edlund 401-40099(MODULAR)

KNIFE STERILIZER MAKE-Sirman UV 16W / Neumarkar 05-01195(MODULAR)

Supply , Installation ,Testing and Commissioning of work table of size 2000X700X850+150 The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work. The welded joints should be ground smooth and polished all directed by EIC.

Supply , Installation ,Testing and Commissioning of Wall Shelf of size 2150X350mm as per drawing or directed by EIC. Wall shelf shall be single tier and installed with wall bracket. Wall shelf should be made of 18 swg SS sheet with 38mm double upbeeding on 3 sides and double beaded downwards at front, duly secured with 16 swg SS wall brackets..Wall shelf shall be fixed as per drawing or directed by EIC.

DOUGH KNEADING MACHINE WITH SAFTY GUARD AND TIMER Capacity- 15 ltr Make- Salva / Kolb / Benton / Macadams (MODULAR)

Supply , Installation ,Testing and Commissioning of work table of size 1200X600X850. The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having heavy duty castor wheels. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work. The welded joints should be ground smooth and polished all directed by EIC.

Supply , Installation, Testing and Commissioning of work table with sink of size 1500X700X850mm with backsplash of 150 mm.The work top should be SS 16 SWG and an under construction of 450x450x250mm One (1) no. 16 Gauge SS. 304 grade Sink fitted as per the layout, Complete with faucet, 50mm dia lever handle operated waste outlet & rear connected overflow & welded to 40x40x4mm SS angle frame supported on 16 SWG. The legs should be of 38mm dia SS 304 grade legswith adjustable nylon bullet feet. 25mm Dia SS 304 grade pipe cross bracing welded to legs at Rear & both sides. Front of Sink to have 20 Gauge SS clading

DOUBLE PLENUM SS EXHAUST HOOD WITH FRESH AIR PLEANUM SIZE-4000X1500X500 MAKE-SSS V-Jet Stream / SPLENOR SPL-PRIMA PLUS / HALTON KVF (MODULAR)

S.S. GRATING SIZE-1000X500X150

S.S. GRATING size-750X350X70

DOUBLE PLENUM SS EXHAUST HOOD WITH FRESH AIR PLEANUM SIZE-3000X1350X500 make-SSS V-Jet Stream / SPLENOR SPL-PRIMA PLUS / HALTON KVF (MODULAR)

Supply , Installation ,Testing and Commissioning of work table of size 1200X600X850. The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having heavy duty castor wheels. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work. The welded joints should be ground smooth and polished all directed by EIC.

Supply , Installation ,Testing and Commissioning of work table of size 1600X700X850+150 The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work. The welded joints should be ground smooth and polished all directed by EIC.

Supply , Installation ,Testing and Commissioning of work table of size 1600X700X850+150 The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work. The welded joints should be ground smooth and polished all directed by EIC.

S.S. GRATING SIZE-2000X350X70

PRE-RINSE- SPLASH MOUNTED MAKE-T&S B-133 WITH B-107 / Klarco (MODULAR)

MIXER FAUCET MAKE-T&S (MODULAR)

Supply , Installation ,Testing and Commissioning of 900x600x1800mm 16 Gauge S.S. sunken top of 200mm deep channel shape. Four (4) no. 38mm dia uprights on Castors.Two(2) no16 gauge SS pan of 150mm deep with All sides turned up 100mm & hemmed outside welded to S.S legs.Four (4) no. heavy duty 150mm dia castors. Under sides of top shall be reinforced 16 Gauge S.S inverted channel.

L-SHAPE SOILED DISH LANDING W/ TWO SINK TABLE Supply , Installation ,Testing and Commissioning of 2500X900+1600X750X 850+150, 16 gauge SS Top. 150mm High back. Front & left sides turned up 25mm, returned 40mm, turned down 75mm & in 12mm.Front & left side frame work tobe covered with 20 Gauge ss sheet. Top and body secured to 40x40x4mm welded SS anglel frame work. 200mm dia shute at right / left side (wherever required). Six (6) no. 38mm Dia S.S. legs. With adjustable bullet feet. 25mm Dia 16 gauge S.S. pipe cross bracing welded to legs at Rear & both sides. All Sheet /Pipe S.S. 304 Grade Pre-polished Plastic Coated. Rear gap of splash to be closed with #20 GA S.S. sheet.

PRE-RINSE- SPLASH MOUNTED MAKE-T&S B-133 WITH B-107 / Klarco (MODULAR)

CORNER LADDER SIZE-850X850X850+150 Make-Winterhalter / Meiko / Hobar(MODULAR)

S.S. GRATING size-1500X300X70

CLEAN DISH LANDING TABLE Supply , Installation ,Testing and Commissioning of work table of size 1800X900X850+150 The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work. The welded joints should be ground smooth and polished all directed by EIC.

Supply , Installation ,Testing and Commissioning of Wall Shelf of size 2150X350mm as per drawing or directed by EIC. Wall shelf shall be single tier and installed with wall bracket. Wall shelf should be made of 18 swg SS sheet with 38mm double upbeeding on 3 sides and double beaded downwards at front, duly secured with 16 swg SS wall brackets..Wall shelf shall be fixed as per drawing or directed by EIC.

CLEAN DISH TROLLEY Supply , Installation ,Testing and Commissioning of 900x600x1800mm 16 Gauge S.S. sunken top of 200mm deep channel shape. Four (4) no. 38mm dia uprights on Castors.Two(2) no16 gauge SS pan of 150mm deep with All sides turned up 100mm & hemmed outside welded to S.S legs.Four (4) no. heavy duty 150mm dia castors. Under sides of top shall be reinforced 16 Gauge S.S inverted channel.

S.S. GRATING SIZE-2000X350X70

FLUSHING HOSE REEL Make-T&S 5HR-242-01 / Klarco (MODULAR)

PRE-RINSE- SPLASH MOUNTED MAKE-T&S B-133 WITH B-107 / Klarco (MODULAR)

MIXER FAUCET MAKE-T&S (MODULAR)

ATTA MAIDA BIN Supply , Installation, Testing and Commissioning of Bin size of 700x450x750mm is to be constructed by 18 gauge MS sheet angle frame work. Bin sides covering shall be made out of 20 gauge stainless steel sheet. Bin is mounted on 4 nos. castor wheels. Top to have opening door made by 18 swg stainless steel sheet.

Supply , Installation, Testing and Commissioning of work table with sink of size 1650X700X850mm with backsplash of 150 mm.The work top should be SS 16 SWG and an under construction of 450x450x250mm One (1) no. 16 Gauge SS. 304 grade Sink fitted as per the layout, Complete with faucet, 50mm dia lever handle operated waste outlet & rear connected overflow & welded to 40x40x4mm SS angle frame supported on 16 SWG. The legs should be of 38mm dia SS 304 grade legswith adjustable nylon bullet feet. 25mm Dia SS 304 grade pipe cross bracing welded to legs at Rear & both sides. Front of Sink to have 20 Gauge SS clading

Supply , Installation ,Testing and Commissioning of chapati rolling table of size 1200X700X850+150 The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work. The welded joints should be ground smooth and polished all directed by EIC.

Supply , Installation ,Testing and Commissioning of Chapati plate with puffer size of 1800x675x850mm. Top is constructed by 20mm thick plate with 12 mm cast iron puffer with sides covered up to 12” stainless steel sheet. Unit is secured on 40x40x4mm SS angle frame work. Chapati unit is have RV burners and pilot lamps with individual control valves.25mm Dia SS pipe cross bracing welded to legs at Rear & both sides.

Supply , Installation ,Testing and Commissioning of chapati rolling table of size 1200X700X850.The work top should be 16 SWG SS 304 grade welded to 40x40x4mm angle frame of SS 202 supported on 16 SWG SS 304 grade 38 mm dia round legs having adjustable nylon bullet feet. Full width 18 Gauge shelf on underneath made of SS 304 grade 25x25x3mm frame work. The welded joints should be ground smooth and polished all directed by EIC.

SS PALLETS SIZE-900X600X150

DOUBLE PLENUM SS EXHAUST HOOD WITH FRESH AIR PLEANUM SIZE-3400X2100X500 MAKE-SSS V-Jet Stream / SPLENOR SPL-PRIMA / HALTON KVF(MODULAR)

Gas bank for 16 cylinder with complete accessories MAKE-For 16 (8+8) Cylinder Manifold (Approx)

Gas pipe line with complete accessories MAKE-Approx 250 Running ft.

GAS LEAK DETECTOR MAKE-AMBETRONICS / GT - 2511 - FLP

STEEL GAS LEAK CANOPY WITH INSPECTION WINDOW MAKE-AMBETRONICS/ GT-2511 CNP

HOOTERS WITH FLASHER MAKE-AMBETRONICS/ HTRS-01

COMMERCIAL GAS SOLENOID VALVE MAKE-AMBETRONICS/ SLV-02 GSV

SUB-MAIN CONTROL MONTORING PANEL MAKE-AMBETRONICS/ SIG2GTY

1 sqmm 4 core shielded armoured cable (rmt) MAKE-POLYCAB / EQUIV STD

GI Conduit Pipe (rmt) (Optional) MAKE-STD

Add 18 % GST

Add 1% Labour Cess

MAHADEVA ENTERPRISES (BID ID -667298)

M/S MANOJ KUMAR PANDEY (BID ID -667287)