PROVN OF MT STORES OF CERTAIN LOCATION AT MISA CAMP UNDER GE (S) TEZPUR

Supply and fixing 50 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m depth; for plinth beam, n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.

Surface dressing n.exc 15cm getting out soft / loose soil complete all as specified and as directed.

All as per Item No 2 above but for each additional 1.5 m or part there of in depth beyond the first 1.5 m all as specified and directed

M & L for Hardcore of guage exc 63mm but n exc 150mm deposited spread and levelled in layers n. exc 7.5cm thick, with broken stone, watered and rolled/rammed to a true surface, complete all as specified and as directed.

M&L for cement concrete Type D2 1:4:8 (40mm graded stone aggregate) in foundations, filling and mass concrete. complete all as specified and as directed.

M&L for RCC-M25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed

M&L for RCC M-25 (Design mix) as in columns, pillars, piers, posts and struts complete all as specified and as directed

M&L for RCC M-25 (Design Mix) as in roof slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like all as specified and directed

M&L for RCC M-25 (Design Mix) for Slabs Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified & directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical complete all as specified and as directed

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions all as specified and directed

M & L for use and waste formwork to sides and soffit of suspended slabs such as roof slab, floor slabs, etc. with rough finished square/rectangular surfaces of concrete complete all as specified and as directed.

Material & labour for formwork to sides and soffits of concrete of beam, lintels, cantilevers etc. with rough finished square/rectangular surfaces of concrete complete all as specified and as directed.

Material & labour for formwork to as in chajjas with rough finished square/rectangular surfaces of concrete complete all as specified and as directed.

M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

M&L for TMT Bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required,including cranking, bending spirally for hooping for columns, hooping ends and binding all as specified and directed

M&L for RCC M-25 (Design Mix) for Chajjas and similar works complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n. exc. 25 cm in hard/dense soil complete, all as specified all as specified and directed

M&L for Spreading and levelling in layers n exc. 25 cm thick well ramming including watering and consolidation ,complete all as specified and as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete as specified and directed

M&L for Polythene film, black, 150micron laid in flooring complete all as specified and directed.

M&L for 40mm thick P.C.C 1:2:4 type B-1 using 20mm graded stone aggregate as in plinth protection/sub base/ etc complete all as specified and directed.

M&L for Screed bed or bedding layer in cement mortar 15 mm thick for laying floor finishes in cm 1:6 complete all as specified & directed

All as per Item No 23 above but on skirting with 10mm thick backing coat in CM 1:4 complete all as specified and directed

M&L for brick work with sub class B brick straight orcurved on plan exc 6 mtr mean radius in cm (1:6) all as specified and directed

M & L for 20-25 mm thick pre-polished machine cut kota stone on flooring/staircase laid and jointed with grey cement slurry mixed and with pigment to match the shade of slab including rubbing/grinding and polishing complete all as specified and directed.

M&L for brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 complete all as specified.

All as per Item No 25 above but on vertical surface such as skirting, risers etc complete all as specified and directed.

M&L for rendering 20mm thick in two layers (15mm + 5mm) as in CM 1:4 on other than fair faces of brick or concrete surfaces, top layer 5mm th with water proofing compound @3% of weight of cement and finishing complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separately

M & L for Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finish top surfaces as even and smooth complete all as specified and directed.

Supply only integral WPC as specified and directed.

M & L for two coats of exterior emulsion anti fungus paint over a coat of primer over a coat of 2 mm thick wall care putty to wall including complete including preparation of new surface as specified and directed

M & L for rendering 5mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finish top surfaces as even and smooth on ceiling complete all as specified & directed

M&L for three coats of white washing to ceiling including preparation of new surfaces.complete all as specified & directed

M&L for preparation new steel surfaces and iron surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length 150mm complete all as specified

S&F 300 mm Aluminium alloy anodised sliding door bolt, plate type and fixing clip of sheet cast of extruded section and fixing bolt and sliding bolt of extruded section and fixed in position complete

S&F 200mm aluminium anodised barrel tower bolt, of extruded section and fixed in position all as specified and directed

S&F 150mm aluminium anodised barrel tower bolt, of extruded section and fixed in position all as specified and directed

M&L for applying two coats of distemper over a coat of primer over a coat of 2mm thick a layer of wall care putty on walls including preparation of new plaster surface complete all as specified & directed

S&F for extruded aluminium alloy handle fabricated type of 150 mm long

S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed.

S&F 75 mm Butt hinges medium weight cold rolled mild steel and fixed.

S&F for extruded aluminium alloy handle fabricated type of 100 mm long

M & L for Non - skid Ceramic tiles (coloured) of size 400x400x8-10mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and directed

S & F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing.

S & F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed

S & F 35 mm thick flush moulded shutter , solid core construction ,with block board core and plywood face panel, commercial type on both side complete all as specified and directed.

M&L for colour Glazed ceramic tiles as in vertical surface of size 450X 300X 8-10mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles as in dado/skirting all as specified and directed

S&F 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed

S & F powder coated Anodised aluminium frame for doors, three track windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Materials and Labour for mid steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S & F powder coated Anodised aluminium window a

nd ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F 4mm thick ordinary quality sheet glass in squares exc 0.5 sqm in each pane fixed in aluminium frame complete all as specified and directed.

S&F vitreous China squatting pan, ‘Orissa’pattern, size 680 x 470 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed

S&F 10 litre capacity PVC low level flushing cistern including flush pipe, connection pipe etc complete all as specified & directed.

S & F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

S&F 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes.

S&F 15 mm bore stop valve fency type with capstan heads, chromium plated screwed down, high pressure, with crutel or butterfly handle, screwed both ends for iron pipe or for unions.

S&F pillar taps fency type with capstan heads, chromium plated, srewed down high pressure, with or without lettered `Hot' or `Cold' with long srewed shanks and fly-nuts, screwed for iron pipe and fixed in 15 mm bore.

S&F 15mm bore 125mm size type brass chromium plated shower rose, complete all as specified.

S & F vitreous china white wash hand basin glat back of size 550 x 400 mm including brackets CP waste pipe and waste coupling 32 mm and PVC waste pipe and 15mm PVC connection complete.

S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) all as specified and directed

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including waste coupling , waste pipe, angle valve, 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe including of fixing supply pipe trap and waste pipe, Urinal spreader of CP for fixing with 15 mm dia pipe. (Minimum weight 60gms))

Each Job

S & F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete as specified and directed

S&F 20 mm Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed

S&F 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors all as specified and directed

S&F 20mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors all as specified and directed

M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends and edges of landings, steps, cills, sunshades, shelves and lintels etc; and cutting chases for concealed water tubing and making good, cutting not exceeding 10 cm girth. all as specified and directed

M&L for preparation of new wooden surface and applying 2 coats of synthetic enamelled paint over coat of pink primer over 10cm width or girth complete all as specified and directed.

S&F 1000 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 110mm bore P.V.C (S.W.R) pipe, single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.

S&F 75 mm bore P.V.C (S.W.R) pipe, single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.

S&F 110mm bore P.V.C (S.W.R) bend

S&F 110mm bore P.V.C (S.W.R)T junction equal or unequal.

S&F 75mm bore P.V.C (S.W.R) bend

S&F 110mm bore PVC (SWR) branch piece, single `Y’ equal or un equal.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms)

S&F 20 mm dia steelness steel curtain rod including brackets , stops, rollers and side nubs etc with all fitting and fixture complete all as directed by Engineer In Charge.

Surface excavation n. exc 30 cm deep and averaging 15cm deep and getting out

Removing excavated soil to distance n exc 50 mtr and deposited as directed by Engr-in -Charge.

S&F 75mm bore P.V.C (S.W.R)T junction equal or unequal.

Excavation over area n exc 1.50 mtr in depth and getting out in hard/dense soil complete all as specified and directed

S&F 110mm bore P.V.C vent cowl

M&L for RCC (1:2:4), type B-1 (using 20mm graded stone aggregate) as in precast slab set in CM (1:4) complete all as specified and directed.

M&L for 15 mm thick plastering on other than fair faces of wall surfaces in cm (1:6) finished even and smooth without using extra cement complete all as specified and directed

M&L for Loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as directed

M&L for supply, laying, jointing and testing salt glazed stone ware drain pipe, grade 'A' 150mm bore (internal dia) laid in trenches on concrete bed to required slope jointed and tested complete all as specified and directed by the Engineer-in-Charge. (Note:- Excavation/earth work and concrete bed shall be measured and paid for separately)

S&F Machine pressed precast concrete interlocking paver block gloosy finished of 60mm thickness laid over and including sand cushoining layer of 40mm thick of any shape and design conplete all as specified and directed

M&L for Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC concealed conduit 20mm dia medium duty with all accessories including modular GI boxes amd cover plate of suitable sizes including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan/call bell point/ Switch socket outlet 5 amps complete all as specified and as directed. Note: (i) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (Rate deemed to be inclusive of cutting chases and making good disturbed surface and GI boxes and Modular plates).

M&L for PCC 1:2:4, type B1 using 20 mm graded stone aggregate as in concrete bed to septic tank complete all as specified and directed

M&L for plain cement Concrete 1:3:6, type C-2(Using 40mm graded stone aggregate) for concrete bed to drain pipes of 150mm bore, under and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed by Engineer-in-Charge

M & L for point wiring for socket out let on 16 Amps independent Boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including metal flush box with modular cover plate with frame of suitable size of 3M and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. Note: (i) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (Rate deemed to be inclusive of cutting chases and making good disturbed surface).

S&F Modular type switch 6 Amps 230V AC single module one way complete all as specified and as directed.

S&F Modular socket out let 3 pin 10 Amps shuttered type 230V AC 2 module complete all as specified and as directed.

S&F Modular socket out let 3 pin 16 Amps shuttered type 230V AC 2 module complete all as specified and as directed.

S&F Modular type switch 16 Amps 230V AC single module one way complete all as specified and as directed.

S&F Ceiling rose, surface bakelite, 65 x 50 mm,three terminals complete all as specified and directed.

S&F Modular type fan regulator Step type,100 Watt, one module/ two module, 230V AC complete all as specified and as directed.

Supply & fixing lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified.

All as per item No. 96 here-in-before but one 3 pin 5 amps switch socket commbination on the independent board with other switch complete all as specified and directed by Engineer-in-charge.

Supply and fixed18 W LED light fitting wall mounted batten 4'ft , minimumm lumen output 100 lumen/Wat, extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6500K including necessary connection complete all as specified and directed.

Supply and fixed10 W LED light fitting wall mounted batten 2'ft , minimumm lumen output 100 lumen/Wat, extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 10 watt,6500K including necessary connection complete all as specified and directed.

Supply and fixed security light fittings 30 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete including 25mm dia light grade GI bracket with nut bolt and clamp complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.

Supply & fix LED bulb 15 watt 6500 k complete all as specified and as directed.

Supply and fixing LED decorative wall light made up of high grade engineering plastic material suitable for LED 20W complete as per manufacturer's instructions all as specified and directed.

Supply and fixed epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and

neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed epoxy powder coated sheet metal enclosure for DBs, double door, Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection complete all as specified and directed.

Supply and fixed MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.

Supplying and fixing two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked) concealed including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. Note : Two run of 6 sqmm wire with one run of 6 sqmm and one run of conduit pipe shall be measured against one unit.

Supply and fixed MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as directed.

S & F ventilating exhaust fan 300 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size all as directed.

Each Job

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.

Each per 1000 Nos

Supply and fixing 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as directed.

Supply & fixing 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.

Supply & fixing 50 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6 mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.