Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.4 LAccepted-AOC MAHALAXMI ENCLAVE OPPOSITE SLP COLLEGE MORAR GWALIOR MP | GWALIOR | GWALIOR | MADHYA PRADESH | L1 | Accepted-AOC AOC | |
| 2 | L2₹29.6 L+₹12,341.10 (0.42%)Rejected-Finance A 13 SURI NAGAR NEAR SLP COLLEGE MORAR GWALIOR 474006 MP | GWALIOR | MADHYA PRADESH | 474006 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹29.7 L+₹20,822.40 (0.71%)Rejected-Finance HLG 223 SIDDHARTHA ENCLAYE TARAMANDAL DISTRICT GORAKHPUR | GORAKHPUR | GORAKHPUR | UTTAR PRADESH | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹31.4 L+₹1.9 L (6.54%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹32.0 L+₹2.5 L (8.61%)Rejected-Finance C O PRAMOD KUMAR SHAH BUS STAND NANDPRAYAG NANDPRAYAG CHAMOLI UTTARAKHAND 246429 | NANDPRAYAG | CHAMOLI | UTTARAKHAND | 246429 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹41.5 L
EMD Value
₹83,000
Closing Date
9 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Gwalior
Garrison Engineer Gwalior Morar Cantt
8906/GWL/E8 PROVN OF TOILETS AND BATHROOM BLOCK ALONGWITH SEWAGE AND DRAINAGE SYS NEAR OFFICERS MESS BLDG NO P-04 AT HATHIKHANA AND CONSTR OF GUARD CUM LIVING ROOM WITH ATT BATHROOM AND TOILET FOR EIGHT OR AT P-268 UNDER AGE B/R-I OF GE GWALIOR
2023_MES_621531_1
8906/GWL/E8
Open Tender
Civil Works
Works
180 days
Garrison Engineer Gwalior
Please refer tender documents
9 documents required · 9 mandatory
₹500
Garrison Engineer Gwalior
₹83,000
Yes
2 Jan 2024
4 Oct 2023
14 Nov 2023
4 Oct 2023
9 Nov 2023
26 Oct 2023
Amount
Excavation in trenches not exc 1.5 m wide and not exc 1.5 deep and getting out in soft/ loose soil complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at alevel n exc 1.5m above the starting point complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in loose/soft soil complete all as specified and directed.
Earth filling under floor spreading, levelling in layer n exc. 25cm thick, incl well raming and watering as required all as specified and directed.
M&L Plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified.
M&L for reinforced cement concrete Design mix M-25 (using 20 mm graded stone aggregate ) as in foundations, including rafts, footings, foundation beams , plinth beams , base for coloumns and mass concrete etc. complete all as specified and directed.
M&L for reinforced cement concrete Design mix M-25 (using 20 mm graded stone aggregate ) as in coloumns , pillars , piers , posts and struts etc. complete all as specified and directed.
M&L for reinforced cement concrete Design mix M-25 (using 20 mm graded stone aggregate ) as in beams, cantilevers bressummers , lintel over 1.5 m span etc. complete all as specified and directed.
M&L for reinforced cement concrete Design mix M-25 ( using 20 mm graded stone aggregate ) as in slab supported on walls ,beams, columns in floor , roof , landing complete all as specified and directed.
M&L, Formwork to sides of concrete, in foundations, footings, columns & beams, etc in flat for rough finshed surfaces of concrete complete all as specified and directed.
Form work to Columns, square/rectangular, rough finish surfaces of concrete complete
M&L, Formwork to soffits of roof slab and chajjas etc thickness not exc 200mm thick complete all as specified and directed.
M&L, Formwork to edges of concrete in roof, chajja lintel beam etc exc 10cm and n.exc 20cm wide complete all as specified and directed.
M&L for mild steel TMT bars ,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.
M&L for mild steel TMT bars ,6 mm to 8 mm dia over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.
M&L for mild steel TMT bars 5 mm and over upto and including 10 mm dia , as in stirrups , spacers , and binders , cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M&L for hard core of broken stone of gauge not exceeding 63 mm, deposited, spread & levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified and directed.
M&L for PCC (1:3:6) type C2, (using 40mm graded stone aggregate) as in plinth protection, 75 mm thick, finishing the surface even and smooth w/o using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and directed.
M & L PCC (1:2:4) Type Bo using 12.5 mm graded stone aggregate as levelling course/mass concrete complete all as spd and directed.
M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.
M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7 to 8 mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.
M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed.
M& L for Brick work with sub class B bricks, straight or curved on plan to any radius, in half brick thick wall built in cement mortar 1:4 complete all as specified and as directed.
M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid seperatly under appropiate item of schedule 'A'
M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.
Supply only integral liquid water proofing compound ISI marked.
M&L for preparation of the newly plastered surfaces & applying three coats of white wash of ceiling surfaces complete all as specified and directed.
M&L for preparation of the newly plastered surfaces & applying 3 coats of white wash of wall surfaces complete all as specified and directed.
M&L for preparation of newly plastered sufaces of walls & applying 2 coat of cement base paint over a coat of primer complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rai ; Panelling of plain colour PVC sheet 5 mm thickness to be fitted in MS frame welded/sealed to the style and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.
S&F galvanised wire cloth, 0.48 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed
S & F butt Hinges, medium weight, stainless steel,100 mm size complete all as specified.
S&F aluminum handles cast type, anodized of 150 mm size complete all as specified and directed.
S&F for aluminium anodised barrel tower bolt of 150mm of extruded section complete all as specified.
S & F factory made steel vetilator with centre hung glazed shutters, including projecting type hinges, with steel handles and steel peg stays , complete with glazing bars, Complete all as specified and directed
S&F factory made steel ventilator with top hung glazed ventilator including projecting type hinges with steel handle and steel peg stay complete witout glazing bar , dovetailed or welded complete all as specified and directed.
S&F 3mm thick pin headed figured sheet glass quality in square n exc 0.5 sqm each pane in new glazed shutter, complete all as specified and directed.
S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 E-165 complete all as specified and directed.
M&L painting to steel surface exc 10 cm width or girth with two coats of synthetic enamelled paint over a coat of red oxide including prepration of newly or previously untreated surface complete all as specified.
S&F tubular towel rail of brass chromium plated , 20 mm dia, D type, 60 cm long betweem flanges complete all as specified and directed.
S&F for of vitreous china wash basin, white, oval type, (size as approved by Engineer In charge) Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Pillar tap and PVC connection will be measured paid separetly.
M&L for vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor, complete all as specified and directed.
S&F Vitreous China Urinals, half stall type white (excluding fjushing cistern, flush pipe and waste pipe complete including providing & fixing ;lugs bedding urinal against wall in cm 1:2 securing urinal to plug with bran screw all as specified and directed.
S&F for viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts,flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed.
M &L For applying water proofing treatment with the following coats :- (a) First coat of bitumen primer conforming to IS -3384 @ 0.3 Kg/sqm (b) Second Layer of APP based polymectric membrane minimum weighing 3kg /sqm and minimum 3 mm thick reinforced with polyster non woven fabric land on primed surface by torch application (c) third two coat of aluminium bituminous paint ( 200ml/sqm i.e 100 ml/sqm in each coat) over polymetric membrane complete all as specified and as directed.
S&F Rotational moulded poly-ethylene three layes insunation puff water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position complete all as specified and directed.
S & F 15mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling, concealed or fixed to wall or laid in floors complete all as specified and as directed
S & F 20mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling, concealed or fixed to wall or laid in floors complete all as specified and as directed
S&F for 15mm ,bib tap Fancy type long body chromium plated,cast copper alloy, and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified.
S&F PVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity (ISI marked) white with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified
S&F for 15mm angle cock chromium plated,cast copper alloy, and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified.
S&F Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions complete all as specified and directed.
S&F for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed
S&F PVC (SWR) pipes, 75 mm bore, single sockets, in any length with rubber ring joints laid in floors or wall complete all as specified and directed.
S&F PVC (SWR) pipes, 110 mm bore, single sockets, in any length with rubber ring joints laid in floors or wall complete all as specified and directed.
S&F PVC (SWR) bends, 110 mm bore, any radius complete all as specified and directed.
S&F PVC (SWR) bends, 75 mm bore, any radiuscomplete all as specified and directed.
M&L for PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.
S&F PVC access door of 110 / 75 mm complete all as specified and directed.
S&F Ball PVC valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed.
M&L cast iron nahani trap 75mm dia with grating including jointing to wste pipe fixed in cement concrete type B1 (1:2:4) etc complete.
M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement
S&F for gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed.
M&L for cement concrete (1:3:6) type C2 using 40mm graded stone aggregate in bed to drain pipe including packing under and hunching against the sides of pipes after they are laid and tested complete for pipe size of 150mm bore.
M&L for 150 mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars
M&L for providing cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) in surfaces channels drains and benching including form work and finishing fair and smooth using extra cement (forming fair finished channel shall be measured and paid for separately)
M&L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone agg) as in cover slabs for man holes and set in CM 1:4 including necessary from work all as specified. Note: Reinforcement and form work shall be measured paid separately)
Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed.
M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate),100 mm thick, as in sub base for floor, finished even and rough complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.
M&L 80 mm thickness machine pressed precast concrete interlocking paver block M-40 any shape and size confirming to IS 15658-2006 in grey cement glossy finish rubber mould casted laid dry over sand cushioning complete all as specified and directed.
M&L for 25 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed
M&L for construction of septic tank including excavation, in any type of soil, foundation in PCC 1:2:4 type B-2, brick work in cement mortar 1:4, RCC Nominal Mix type B-1 1:2:4 (using 20 mm graded stone aggregate) with and including reinforcement work, slab cover including RCC precast cover slab having 6 mm plate embedded all around with angle iron frame, vent pipe shaft and sludge chamber etc complete for 50 users complete all as specified and shown in dwawing No. CEBZ/TD/76/2011 Sht No 1/2 to 2/2 .
M&L for construction of soakage well including excavation, in any type of soil, foundation in PCC 1:3:6, wells of honey combed brick work in CM 1:4 and solid in RCC Nominal Mix type B-1 1:2:4 (using 20 mm graded stone aggregate) with and including reinforcement work including intercepting chamber, screen chamber brick work in CM 1:4, RCC cover slab in nominal mix type B-1 1:2:4 , filling with brick bats, complete of size 2.40 m in dia and 3.00 m in deep (effective depth) all as specified and shown in dwawing No. CEBZ/TD/78/2011 Sht No 1/2 to 2/2 .
M&L PCC 1:3:6 type C1, 75 mm thick finished even and smooth without using extra cement as in plinth protection including forming of joints 10mm wide and 75mm deep and joint filled with bitumin and sand mixture in 1:1 ratio complete all as specified and directed.
M&L Hard core of gauge exc 63mm but n.exc.100mm, deposited, spread and levelled in layer n.exc. 15cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed.
Rendering 5 mm thick in cement mortar 1: 3 to concrete surface finished even and smooth without using extra cement complete.
Rendering 15 mm thick on concrete surface of roof (top) in cement mortar 1: 4 mixed with WPC finished even and smooth without using extra cement complete when concrete is green.
M&L Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed bed in CM 1:6 laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete.
M&L for mirror polish to existing kota stone floor complte all as specified and directed by enginner in charge.
M&L Machine cut kota stone slab flooring 12-15mm thick on risser of steps, skirting, dado layied and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.
M & L non-skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tile exc 0.06 sqm and but n.exc 0.11 Sqm in floors etc laied over 15mm thick screed in CM 1:4 and 25mm thick PCC type B1 ( 1:2:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match.
M & L Glazed ceramic coloured tiles 300x200x7mm on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick CM 1:3.
Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position with ball walves 20mm PTMT complete (min weight 210 gms all as specified
S & F, 75 mm dia out let PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed.
S&F PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete.
S & F, Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)
S & F vitreous china wash basin white, flat back size 630x450mm including one pillar cock cp 15mm bore, brackets of ms angle 25x3mm waste pipe 32mm, CP coupling etc complete all as specified and directed.
S & F Bib taps, cast copper alloy chromium plated with crutch or butterfly handle (Long body), screwed down, screwed for iron pipe of bore 15mm.
S & F PVC connection 600mm long with CP nuts with washers ends 15mm bore.
S & F Chromium plated shower roses with or without swivel joints 125mm size.
Shelf of PTMT fixed with and incl chromium plated brass screws andwooden/plastic cleats (minimum weight 300gm)
M & L Salt-glazed stoneware gully traps of size 150x150 square, type 'P'
M&L for PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.
M&L PCC 1:3:6 type C1, (using 20 mm graded stone aggregate) as in bed block for holdfast copings all as specified
S&F pressed steel frame 125mmx60mm for doors with one or more rebates including necessary fixing lungs and hinges, lock strike plate,etc complete all as specified and directed
S & F 2nd class hard wood Plain framed, panelled shutter (two panel) with out inter locking rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
S & F 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats®
S & F Aluminium anodised, barrel tower bolts of extruded section and fixed 200mm
S & F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
S & F Butt hinges, medium weight, cold rolled mild steel 100mm fixed to MS frame work and or PVC door frame by welding or screwing as required at site.
S & F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete
S & F floor door stopper aluminium body and tongue, 140 mm
S & F Stainless steel peg set of six
S & F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, 3.00 mm thick
S & F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or galvanised wire staples
Preparation of new wood or wood based surfaces over 10cm width or girth and applying 02 coats of synthetic enamel paints over a coat of pink primer.
Preparation of new plastered surfaces of walls and applying 02 coats of oil bound distemper over a coat of suitable primer.
Preparation of new plastered surfaces of walls and applying two coats of weather proof water based emulsion paint ( Acrylic paint exterior grade) over one coat of primer complete all as specified and directed.
S & F Factory made steel window double shutter to receive gauze (wire mesh) and glass (with sash bars) including provision of grills made of 12mm square bars with a distance of 10cm centre to centre including box type hinges, holdfast etc all asper Drg No. CEBZ/TD/05/2008.
S&F 4mm dia plain mild steel wire galvanised class 3, in detached work such as floor mosquitto nets including straining bolts, hooks and eyes etc .
S&F curtain rods 19mm dia Harrison rails, mild steel, chromium plated with fixing brackets, with brackets.
On site LLDPE septic tank designed to carry sewage andsullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc,complete for 10 users with upflow filter including media.
Soakage wells excavation , in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M25 concrete including intercepting chamber and screen chamber made of brick massonary in CM, RCC cover slab in M25/ SFRC cover , interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2M dia x 1.5 M effective depth.
M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia IS 14930 (Part-I) 2001 with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 694:2010, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete
One light point controlled by one switch.
One Exhaust fan point controlled by one switch.
One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.
Description all as per item No 127.00 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire.
S&F switch piano, flush button single pole one way 5 Amp complete all as specified and directed.
S&F socket out let, multipurpose, 2 in 1 5 pin, 5 Amp complete all as specified and directed.
S&F switch piano, flush button single pole one way 15 Amp complete all as specified and directed.
S&F socket out let multipurpose flush type, 2 in 1 6 Pin 5/15 amps complete all as specified and directed.
S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.
S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete.
S&F LED 'T' Type Mirror light fitting 09/10 watt, 6500k , luminous efficiency >110lm/wattwith provision of fixed in Lamp holder complete.
S&F LED Lamp 09/10 watt complete with 5 star rating. Make of LED Bulb:
Supply and Fixing Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K ,luminous efficiency 110lm/watt fitting, incluing reqd length of wire not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including taking down of old u/s light and testing on completion all as specified and directed.
M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia IS 14930 (Part-I) 2001 with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 694:2010, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.
S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 100 Amp,4 pole & Including MCCB 100 amps 4 pole 16 KA complete. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site.
S&F MCB DB, sheet metal enclosures double door SPN 8 way with suitable size of bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.
S&F, MCB SPN 63 Amps, 240 volts 'C' series 10 KA ,including connection with suitable size copper lugs complete all as specified and directed.
S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.
Supply & Fix fresh air fan, 300mm sweep 900 rpm with louvers with plastic bodyand all other assembly as specified and directed.
S & F in repairs security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor cable for connection from ceiling rose to light fittings incl testing on completion all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, with & including adequate quantity of charcoal dust and common salt, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 sqmm dia concealed non metallic conduit complete all as specified and directed.
M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia IS 14930 (Part-I) 2001 with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 694:2010, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete
One light point controlled by one switch.
One Ceiling fan point controlled by one switch.
One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.
One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.
Description all as per item No 146.00 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire.
S&F electronic step rotary type fan regulator of two module capacity 80 to 100 Watt, 240 volts, AC 50Hz complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all specified and directed.
S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 100 Amp,4 pole & Including MCCB 100 amps 4 pole 16 KA complete. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site.
Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area of following 16 Sqmm 4 Core.
Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete.
Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete.
S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.
Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area of following 25 Sqmm 4 Core.
S & F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl taking down of old u/s light testing on completion all as specified and directed.
S&F tube Medium' grade galvanised with all fitting laid in trenches, of 25 mm dia complete all as specified and directed.
S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes of 25 mm dia complete all as directed.
Cutting of existing Cast iron pipes in position for insertion of new tees, for branch connection of 25 mm dia from bore of pipe existing CI pipe 80 mm
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.
Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp
M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia to IS 14930 (Part-I) 2001, with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 694:2010, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed.
Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CuM per hour (or nearest size).Steel body complete all as specified and directed.
M/s KGN Builders
M/s Maa Vaishno Construction Co.
MAHARAJ KUNWAR SAHAB CONSTRUCTION
M/S SANJAY AGARWAL
Shree Jee Associates
BHAGIRATH CONSTRUCTION COMPANY
M/S MAHAVIR SINGH
M/s Subhash Construction Co.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .