Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.3 LAccepted-AOC 6 1ST CROSS 1ST MAIN OLD POLICE STATION ROAD LAKKASANDRA BANGALORE 560 030 | BENGALURU URBAN | KARNATAKA | 560030 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹44.1 L+₹2.7 L (6.43%)Rejected-AOC 37 4TH CROSS ASHWATHNAGAR SANJYANAGAR POST BANGALORE 560 094 | BENGALURU URBAN | KARNATAKA | 560094 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹47.0 L+₹5.6 L (13.4%)Rejected-AOC | L3 | Rejected-AOC Rejected |
Tender Value
Refer Docs
EMD Value
₹97,000
Closing Date
12 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BANGALORE
GE (AF) BANGALORE, HQ TC AIR FORCE , BANGALORE - 560006
ADDN ALTN TO PATH LAB AND PROVN OF SECURITY GATE TOWARDS REAR SIDE OF AFIDS BUILDING AT CHAFB
2024_MES_665359_1
8257/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) BANGALORE
AS PER NIT
5 documents required · 5 mandatory
₹500
Yes
GE (AF) BANGALORE
₹97,000
3 Oct 2024
11 Jul 2024
19 Sept 2024
11 Jul 2024
12 Sept 2024
25 Jul 2024
12 Jul 2024 - 18 Jul 2024
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out hard/dense soil complete all as specified and directed
Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil complete all as specified and directed
M&L for PCC 1:4:8 Type D2 (40mm graded stone aggregare) in foundations, filling and mass concrete complete all as specified and directed.
Formwork to sides flat rough finished of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed
Formwork to sides of pillars, posts, struts, piers,columns, and stanchions including rough finished surfaces of concrete Square, rectangular or polygonal complete all as specified and directed.
M&L Reinforced cement concrete (nominal Mix) type B1 1:2:4 (using 20mm graded aggregatet) Foundations, including rafts,footings, foundation beams,plinth beams; bases for columns, etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L Reinforced cement concrete (nominal Mix) type B1 1:2:4 (using 20mm graded aggregatet) Columns, pillars, piers, posts and struts complete all as specified and directed.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L Precast cement concrete block masonry with soild blocks, type C1 (1:3:6) using 20mm graded aggregate exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.
M&L for Rendering 10mm thick in cement morter 1:6 and 5mm thick in cement morter 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer's instruction etc finished even and smooth without using extra cement complete all as specified and as directed. (Note : WPC shall be measured and paid separetely)
M&L Glazed ceramic tiles coloured of size 450X 300X 7mm thick as vertical surface set and jointed in neat cement slurry and pointed in white or colour cement mixed with pigment to match the shade of the tiles complete all as specifiedc and as directed with 10 mm th rendering in cement mortar 1:3 for laying wall finishes complete all as specified and as directed.
M&L for wall cladding/Glazed earthenware Coloured tiles 6 to 8 mm thick including 10mm thick rendering in cement mortar 1:3 on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed. Note : Size, shape,colour and design of tiles as approved by Garrison Engineer /Engr-in-charge.
M&L Granite 18 to 20mm thick (of any type) work ,table rubbed and polished in steps, jambs, pillars, window- cills, cooking platforms and table top for fixing wash basin and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite shade including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.
M&L Hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for 75mm thick Cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring or pavings etc complete all as specified and as directed.
M&L for 75mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded stone aggregate) as in flooring or pavings etc complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and jointed in cement mortar all as specified and as directed.
M&L for machine pressed precast concrete interlocking coloured rubber moulded paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over and including 40-50 mm thick M sand cushion complete all as specified and as directed.
S&F framed work such as grills, grating, etc with ends of bars shouldered and/or rivted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conformig to Fe.290. Gde-E-165 complete all as specified and as directed.
M&L 1.25mm thick Mild steel, plain, black sheet in hearths;covering to door shutters; covering to door chowkats (frames);chullah hoods; watertanks; water troughs;ducts; urinal troughsand funnels, etc. cut tosize edges beaded if directed, holes punched;including round headed screws, clout nails or rivets and fixed to wood or steel members, etc.with plain 40 mm lap joints or welded/riveted seams including,bending, turning up,mitred angles, stoppedends, outlets, etc. as required complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.of hard/dense soil complete all as specified and as directed.
Removing Excavated soils exceeding 1.5 km but not exc. 5 km and depositing where directed complete all as specified and as directed.
M&L for preparation of new surfaces of steel over 10cm in width or girth with two coats of synthetic enamel paint over coat of red oxide primer complete all as specified and directed.
M&L for preparing new plastered or un plastered surface of walls and applying two coats of Cement base paint on walls a over alkali resistant priming paint through mechanical means complete all as specified and directed.
M&L for preparing old plastered or un plastered surface of walls and applying two coats of Cement base paint on walls through mechanical means complete all as specified and directed.
S&F 300/450mm size stainless steel letter in Hindi/English and fix with stainless steel screw etc complete all as specified and directed
S&F Logo/emblem of "AFIDS BANGALORE" engraved with laser on stainless steel plate of 450x450x1.5mm thick mounted on granite top/steel arch surfaces or on beams (horizontally/vertically) with 04 Nos stainless steel rivet screw, fixed to plate, ccomplete all as specified and directed.
S&F Point wiring with cable of PVC insulated FRLS copper multistranded conductor 2.50 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements on Stone walls / brick masonary walls /ceilings / floors etc including fixing top cover /PVC /MS Modular type junction boxes on Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 2.50 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly for One light controlled by 1 switch 5 amps, single pole etc complete all as specified and directed.
S&F LED Focus light fitting 30 W, 220V, LED cylinders employ CCT angle 36 degree with driver, complete all as specified and directed. Make : CROMPTON, Model : ORBIT, CAT NO : CDS-200-30-57-SL-NWH, or eqivalent in HAVELLS/ BAJAJ/ WIPRO.
Supply, laying testing commisioning of LT UG Cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 10.00 sq.mm 2 Core , laid on walls, floors, trench etc complete all as specified and directed.
Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out in soft/loose soil for pipe trenches complete all as specified and directed.
M&L for filling of dry sand in trenches for proper cushing of LT cable below and above the LT cable complete all as specified directed. Note- Punned thickness of sand i.e 18 cm to be consider for measurement purpose.
S&F Fire bricks, size 230x113x75 mm laid in trenches as in protection of UG cables all complete all as specified and directed.
S&F GI tubing light grade 40 mm bore as in cable protection fixed to poles/walls or laid in trenches/under road crossing etc complete all as specified and directed.
S&F Sheet metal enclosure for DBs double door SPN, 4 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V, concealed in walls complete all as specified and directed.
S&F MCB SPN, 32 Amps, 240 V, C- series with breaking capacity of 10KA complete all as specified and directed.
S&F MCB SP, 6-32 Amps, 240 V, C- series with breaking capacity of 10KA complete all as specified and directed.
Taking down chowkats or frames area not exceeding 1.50 Sqm (w/o taking off shutters from frames) and removing from site complete all as specified and directed.
Taking down chowkats or frames area exceeding 1.50 Sqm but not exc 4.00 Sqm (w/o taking off shutters from frames) and removing from site complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry,laid dry below or above ground level and removing material from site complete all as specified and directed.
S&F Anodised aluminium snap grid (Size of grid 605 x 605mm) frame work for false ceiling including Hangers 6 mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners12.5mm dia. 40mm long all, complete all as specified and as directed.
S&F 12mm thick Perforated particle board/tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with screws or with staples on snap grid, complete all as specified and as directed.
M&L Preparation of new perforated particle boards surfaces of ceiling and wall panelling, including two coats of distemper oil emulsion complete all as specified and directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F for 12mm thick prelaminated (both sides with decorative choice) particle board, interior grade, fixed with screws or securing with beading for aluminium partition wk etc, complete all as specified and as directed.
S&F for 5.5mm thick plain sheet glass, ordinary quality and glazing rubber beading in square exc 0.5 sqm in each pane complete all as specified and as directed.
S&F for 4mm thick figured glass, ordinary quality and glazing rubber beading in square nexc 0.5 sqm in each pane complete all as specified and as directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, ISI marked complete all as specified and as directed.
S&F made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 45 mm x 70 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "Rajshri/Echon or Eq" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Fasteners/Hold Fast of required dia and length, all as per specifications drawings complete all as specified and as directed. Note: Material test certificate and authentication should be compoulsory provided by the manufacturing company.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / m2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fie retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws,complete all as specified and as directed. Note : Stainless steel butt hinges and necessary SS screws shall be paid separately.
Supply & fixed 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150 mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.
S&F 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed.
S&F Alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and as directed.
S&F double legged door stopper of overall length of cover plate 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors and rubber complete all as specified and as directed.
M&L for 25mm thick PCC type B-1, 1:2:4 (using 20mm graded aggregate) as in sub base to laying the floor tiles etc. complete all as specified and as direced.
M&L Double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to, in floors etc. set and jointed in neat cement slurry and inted in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
All as per Item no 62.00 here-in-before but in skirting to walls including 10mm thick cement plaster in ement mortar 1:4 as backing coat on fair faces on stone surface all complete all as specified and as directed.
M&L for Mirror polishing on marble/granite/kota stone/stone work where ever required to give high gloss finish complete all as specified and as directed.
M&L for Vitrified out door tiles 40 cm x 40 cm x 10-12 mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 complete all as specified and as directed. (Make-H & R Johnson, Brand-Endura digital designer series or equivalent)
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
M&L 18/19mm thick block board ,grade 2 quality interior grade , commercial type fixed with screw to timber frame work including taking down complete all as specified and directed.
M&L Decorative laminate type 1 of 0.9 mm thick surface finish, colour and pattern as approved, fixed with approved adhesive as manufacturer's complete all as specified and directed.
S&F Continious piano hinges, continuous type of mild steel bright finish or electro galvanized with width of flap (when open) 30mm complete all as specified.
S&F 75mm long Brass handle, cast type, polished bright fixed with nut and screws to cupboard shutter complete all as specified and directed.
S&F magnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed, complete all as specified.
Taking down cement plaster from brick walls/stone masonry walls, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.
M&L for 15mm thick rendering in cement mortar 1:6 on brick/stone masonry or concrete surfaces (internal walls) of any description, finished the surface even and smooth without using extra cement complete all as specified.
M&L for 15mm thick rendering on fair faces of brick work/stone masonry, concrete surfaces (external walls) or stone walls upto tripple storey bldgs in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions, finished even and fair, complete all as specified and as directed. Note : (i) WPC shall be measured and paid separately. (ii) Rendering upto 9 mtr ht shall be included in the quoted rate.
M&L 10 mm thick cement plaster in cement mortar 1:3 on ceiling, finished even and smooth without using extra cement complete all as specified and as directed.
Supply only liquid water proofing compound, ISI marked complete all as specified and directed.
Supplying & laying 03 coats of reinforced acrylic coating ‘New Coat’ as on sunken floor applied @1.5 Ltr/Sqm in 03 coats to achieve total 1 mm thickness in any position including cleaning surface of sunken slab with wire brush/mechanical brush and with water thoroughly to remove all dust/dirt and loose particles to expose base concrete/sunken slab etc including repairing of loose/defective joints and applying 15mm thick plaster in CM 1:3 to level the surface and treatment to be applied all as per manufacturers instructions, complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 ( using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, apex stones,side of interlocking tiles etc complete all as specified and directed.
M&L for 100mm thick PCC 1:2:4 type B-1, (20mm graded aggregate) as in sunken floor complete all as specified and directed
Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of steel reinforcement as required to facilitate demolition, complete all as specified.
M&L for providing reinforced cement concrete 1:2 :4 type B1 using (20mm graded stone aggregate ) as in cooking platform slab supported on wall, beam, cantilevers and kitchen cooking platform including necessary formwork complete all as specified.
M&L for repair to RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in chajjas beams etc upto tripple storey bldgs including necessary formwork complete all as specified and directed.
S&F Mild steel TMT bars, 8 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty, complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of weather coat over a coat of 1 mm thick wall care putty for neat and smooth finishing complete all as specified.
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty on ceiling complete all as specified and directed.
M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper (acrylic) white or tinted over a coat of priming over a coat of 1 mm thick wall care putty on walls upto tripple storeys bldg complete all as specified and directed.
M&L for complete removal of existing treatment and preparation of old plastered surfaces of wall and applying two coats of exterior emulsion paint weather coat over a coat of 1 mm thick wall care putty for neat and smooth finishing complete all as specified and directed.
M&L for preparation of old Plastered or un-plastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying one coat of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty complete all as specified and directed.
M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted steel surface of any description, over 10cm in width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Supply & fixed 50mm bore LDPE (Low density Polyethylene Pipes) of pressure rating 6Kgf/Sqcm fixed complete to walls,ceilings or in floors including taking down of old GI tubing, 40 mm bore all as specified and directed.
S&F Polymer coloured (Polypropeylene Delrin and ABS) low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet ball valve float valve bends brackets, rawl plug, brass screws handle etc complete having BIS derscription mark with 2731 with and including suitable size of MS brackets, plug, screws all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with Water closet of any type complete all as specified and directed.
S&F vitreous China squatting pan of Orrisa pattern size 580mmx440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and integral foot rests of any pattern complete including provision of lime concrete bedding, trap and connection to flush pipe complete all as specified and directed.
S&F in repairs vitreous china premium quality/1st quality wash down water closet pan (pedestal pattern), white (excluding flushing cistern & flush pipe) & incl 01 No ‘P’ or ‘S’ trap of dia 100mm including provn of lime concrete bedding, complete all as specified and directed.
S&F in repair Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
S&F in repairs, Urinal spreader of Brass chromium plated for fixing with 15 mm dia pipe., complete all as specified and directed.
S&F in repair 15mm bore concealed stop valve type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all complete all as specified and directed.
S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tanks white triple layered (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position complete all as specified and directed.
S&F in repair gun metal globe/gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type fixed of 20mm dia complete all as specified and directed.
S&F in repair PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes complete all as specified and directed.
S&F in repairs Vitreous China W.H.B. white oval type counter below type of size 570 x 445 mm including waste coupling, waste pipe and brackets etc complete all as specified and directed.
S&F in repairs 15mm bore pillar tap, fancy type, chromium plated cast copper alloy with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks , complete all as specified and directed.
S&F in repairs bib tap screwed down high pressure, cast copper alloy,fancy type, ISI marked, with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed.
S&F in repairs angle cock 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified and directed. (Note : Weight of cock shall not be less than 0.575kg)
S&F in repairs glass shelf assembly consisting of made out of 5.5 mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F for CP in repairs brass Soap Dish Holder, complete all as specified and as directed.
Taking up or down steel tubing and connections of 15mm bore including cleaning for refixing or removal to store provision for branch connection by inserting tee union elbow etc. complete all as specified and directed.
All as item 110.00 here-in-before but 20mm bore, complete all as specified and directed.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the entire satisfaction complete all as specified and directed.
Refixing old steel tubing of 15mm bore and connections in new or old position (Walls, ceiling, floors, etc complete all as specified and directed.
S&F GI steel Tubes 20mm bore, 'medium grade', galvanised, with all fitting; laid in trenches and fixed complete to brick/stone wall or laid in floor concealed, complete all as specified and as directed.
Refixing old steel tubing of 20mm bore and connections in new or old position Walls, ceiling, floors, etc complete all as specified and directed.
S&F in repair PVC connections 45cm long including 15mm bore PTMT nuts on both ends complete all as specified and directed.
S&F in repairs PVC (SWR) floor trap 75/110mm dia, with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.
Dismantling of PVC (SWR) pipes, and taking out complete all as specified and directed.
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed .
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors
S&F PVC (SWR) bends any radius 75mm dia complete all as specified and directed .
S&F PVC (SWR) bends any radius 110mm dia complete all as specified and directed .
S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed .
S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia complete all as specified and directed .
S&F PVC (SWR) vent cowl 75mm dia complete all as specified and directed .
S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed .
S&F stack clamps out of 40mm by 4 mm flat iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/75mm bore etc complete all as specified and directed .
S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including jointing to waste pipe fixed in cement concrete type-B-1 1:2:4 usicomplete all as specified and directed complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings & fixtures such as switches, ceiling rose, pendants, regulators, sockets, ceiling roses,pendants, regulators, light fittings etc. Removing materials to store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified & as directed.
Taking down ceiling fans from ceiling, dismantling blades & refixing of the same including provision of cable from ceiling rose or connector to fan complete all as specified and directed .
Taking down Exhaust Fans from walls and Refixing the same including connecting up and provision of cable from ceiling rose or connector to fan all as specified and directed.
S&F Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements concealed in Stone walls / brick masonary walls /ceilings / floors etc by cutting chasis in existing stone/ brick masonary, including fixing top cover /PVC /MS junction boxes fixing in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :- NOTE : Chases/ groove cutting shall be measured and paid separately under relevant items.
One light point controlled by one single pole 5 Amps switch.
One Ceiling fan point controlled by one single pole 5 Amps switch.
One Exhaust fan point controlled by one single pole 5 Amps switch.
One 3 pin switch socket out let point 5 Amps switch on independent board.
One 3 pin switch socket out let point 5 Amps switch on same board.
S&F Modular switch , 1 Module single pole one way 10 Amps complete all as specified and directed
S&F Modular switch , 1 Module single pole one way 16 Amps complete all as specified and directed
S&F Modular socket , 2 Module 6 Amps, 2/3 pin, 240 volts Ac 2/3 pin combined all as specified and directed at site.
S&F Modular socket , 2 Module 6/16 Amps, 2/3 pin, 240 volts Ac 2/3 pin combined all as specified and directed at site.
S&F PVC ceiling rose 65 x 50 mm surface type with 3 terminals all as specified and directed.
S&F office LED Luminaires type 40 watts, LED 600 x 600 mm Recessed type fixed in grid ceiling incl connecting up with PVC sheathed 1.5 sqmm 2 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.
S&F LED Light fitting, 22 Watts, 220 volts, with driver, holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from Ceiling rose complete all as specified and directed
S&F LED Light fitting, 10 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from Ceiling rose complete all as specified and directed.
S&F sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 6.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements on stone wall, floor or ceiling / brick masonary inc 6.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two runs of copper conductor together taken as one length for measuring unit length.
S&F sub main wiring with Four single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 10.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixed on stone wall, floor or ceiling / brick masonary inc 10.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : Two runs of earth continuity conductor,one run of PVC Conduit and Four runs of copper conductor together taken as one length for measuring unit length.
M&L for Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground ( earth pit not less than 2.25mtrs deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level, connected to galvanised earth lead wire 4.00 mm dia as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indiacted including testing on completion complete all as specified and directed.
S&F Earth Continuity Conductor or main earthing lead fixed to wall on batten or recess or chasis or buried in ground or drawn in conduit / pipe or fixed for earthing etc. of size 4.00 mm dia galvanised iron or steel wire complete all as specified and directed.
S&F Sheet metal enclosure for DB's double door SPN, 8 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V, complete all as specified and directed including taking down old unsv from existing place.
S&F Sheet metal enclosure for DB's double door TPN, 8 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V, complete all as specified and directed including taking down old unsv from existing place.
S&F MCB TPN, 63 Amps, 415 V, C- series with breaking capacity of 10KA complete all as specified & directed.
S&F MCB SPN, 6 to 40 Amps, 240/415 V, C - series with breaking capacity of 10KA complete all as specified and directed.
MCB SP, 6-40 Amps, 240V, C- series with breaking capacity of 10KA complete all as specified and directed.
S&F Surge protection device Type TP+N, AC Triple pole and neutral, 20kA N complete all as specified and directed.
S&F of modular white cover plate with frame, 3 module complete all as specified and directed.
S&F of modular white cover plate with frame, 4 module complete all as specified and directed.
S&F of modular white cover plate with frame, 6 module complete all as specified and directed.
S&F of metal flush box 3 module complete all as specified and directed.
S&F of metal flush box 4 module complete all as specified and directed.
S&F of metal flush box 6 module complete all as specified and directed.
Cutting into or through the stone walls / brick walls built in cement mortar or cement lime mortar and walls of cement concrete suitable size for housing for sunk box using heavy duty stone drilling/cutter machine and making good the disturbed surface complete all as specified and directed. NOTE : For Item Sl. No 133.00,139.00,148.00 & 149.00, Chases/ groove cutting in stone walls/ brick wall/ block masonary walls as required for concealed wiring shall be measured and paid separately under relevant item no 164.00 & 165.00
Cutting chases, pinning in Stone walls/ brick walls etc making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc, for concealed conduit wiring a into or through the stone walls built in cement mortar or cement lime mortar and walls of cement concrete suitable for housing 25mm dia conduit pipe using heavy duty stone drilling/cutter machine and making good the disturbed surface complete all as specified and directed.
S&F modular type fan regulator upto 120 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm complete all as specified and directed. .
S&F Exhaust fans, steel body, AC single phase 230/ 240 V of size 300 mm sweep with blades & frames and louvers, complete all as specified and as directed.
M/S J S PRAKASAM (BID ID -3087135)
OM CONSTRUCTIONS (BID ID -3094005)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .