84868 PROVISION OF CERTAIN LBW AND SPECIAL WORK UNDER CWE PUNE

B&R PORTION Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation for shafts, wells, cesspits, manholes, pier holes, pole etc n.exc 10 sqm on plan and getting out soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation for shafts, wells, cesspits, manholes, pier holes, pole etc n.exc 10 sqm on plan and getting out hard/dense soil complete all as specified and directed.

Excavating over areas, not exc 1.5 m but n exc. 3.0 m deep and getting out in hard/dense soil complete all as specified and directed.

Excavating over areas, exc 1.5 m deep and getting out in hard / dense soil complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. in all kind of soil, complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. in ordinary rock, complete all as specified and as directed

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift exc 1.50 M but n exc 3.00 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. in ordinary rock, complete all as specified and as directed

M&L for moorum filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed

M & L for Plain Cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete in foundation, complete all as specified and as directed

M&L for Plain Cement concrete (1:3:6) type C2 (using 40 mm graded stone aggregate) Cement concrete in foundations, filling and mass concrete complete all as specified and as directed

M&L for Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm over a 25 mm thick layer of Damp proof course in cement concrete (1:2:4) type B-0 including necessary formwork complete all as specified and as directed

M&L for RCC M-25(Design mix) (using 20mm graded stone aggregate) as in foundations, including rafts,footings, foundation beams;plinth beams; bases for columns, etc basement slabs,under-reamed piles and mass concrete complete all as specified and as directed

M&L for RCC M-25(Design mix) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specfied and directed

M&L for RCC M-25(Design mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed

All as per Ser. item No 15.00 aobve but in beams cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed.

M&L for M-25 (Design mix) (using 20mm graded stone aggregate)in chajjas and the like complete all as specified and as directed

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical with fair finished, complete all as specified and as directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter in rough finished surface complete all as specified and as directed

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or slope), complete all as specified and as directed.

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finish complete all as specified and as directed.

Use and waste of Form work to sides and soffits of floor or roof beams, beam haunch-ings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc wth rough finished surface concrete flat, complete all as specified and as directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip, complete all as specified and as directed.

S&F MS round bars 10 mm dia and over cut to length, bent to shape reqd incl cranking bending etc and binding with MS wire (annealed) not less than 0.9 mm dia as in chain link fencing fixing complete all as specified and as directed

All as per Ser. item No 24.00 above but for 6mm to 8mm bars as in stirrups,complete all as specified and as directed

M&L for ANTI-TERMITE TREATMENT,Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and as directed.

M&L for ANTI-TERMITE TREATMENT,Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete all as specified and as directed.

M & L for ANTI-TERMITE TREATMENT,Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and as directed.

M&L for ANTI-TERMITE TREATMENT,Treating the bottom and sides of excavation.under floor and plinth protection etc at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L for ANTI-TERMITE TREATMENT,Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per running meter of the primeter wall complete all as specified and as directed.

M&L for AAC (Autoclaved Aerated Concrete) block masonry using ISI marked Grade–I blocks of size 600mm × 200mm × 200mm, having minimum compressive strength not less than 5 N/mm², density 651–750 Kg/m³, thermal conductivity 0.18 W/m·K, and sound reduction 37–42 dB, containing minimum 45% fly ash, laid and jointed in block jointing mortar (CM 1:6 or approved adhesive), including provision of bond beam 200mm × 100mm with 2 Nos 8mm dia Fe–500 TMT bars provided at every 1200mm height of wall, complete all as specified and directed. Note: Rate quoted shall be deemed to include the cost of bond beam, reinforcement, jointing materials, scaffolding, curing, and making good of wall surfaces, complete all as specified and directed.

M&L for AAC (Autoclaved Aerated Concrete) block masonry using ISI marked Grade–I blocks of size 600mm × 200mm × 100mm, having minimum compressive strength not less than 5 N/mm², density 651–750 Kg/m³, thermal conductivity 0.18 W/m·K, and sound reduction 37–42 dB, containing minimum 45% fly ash, laid and jointed with approved block jointing mortar (CM 1:6 or equivalent adhesive), complete all as specified and directed.

M & L for 10 mm thick single coat Ready Mix plaster on internal walls as per manufacturer's instruction and complete all as specified and as directed.

M & L for 15 mm thick single coat Ready Mix plaster on internal walls as per manufacturer's instruction and complete all as specified and as directed.

M & L for 12 mm thick single coat Ready Mix plaster on external surfaces as per manufacturer's instruction and complete all as specified and as directed.

M & L for 5 mm thick single coat Ready Mix plaster on ceiling as per manufacturer's instruction and complete all as specified and as directed.

M&L for 5 mm thick cement plaster in CM (1:3) on concrete surfaces in ceiling finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick in CM (1:4) on fair faces of concrete surfaces, complete all as specified and as directed.

M&L Rendering 15mm thick in cement mortar 1:4 on brick/ masonry surfaces, finished even and smooth, with integral water proofing compound (WPC) as per manufacturer’s instructions, complete all as specified and directed. Note: The cost of WPC shall be measured and paid separately.

M&L for rendering 15mm thick in CM (1:4) in two layers, 5mm thick in CM (1:4) over a coat of 10mm thick in CM (1:4) surface finished with sponge finish in patches if ordered complete all as specified and directed

M&L for 15mm thick cement plaster in CM (1:4) on bricks or concrete surfaces finishing the surfaces and fair incl. two coats of cement base paint over a coat of primer on new wall surface complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of plastic emulsion of any tint over a coat of primer over 1.0 to 1.5 mm thick layer of wall care putty complete all as specified and as directed.

M&L for preparation of new plastered or unplastered concrete surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L for preparation of New plastered surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over a coat of primer on wall complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash of any tint complete all as specified and as directed.

M & L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper of approved tint and pattern over one coat of primer over a coat of 2mm thick wall care putty on wall complete all as specified and directed

M& L for preparation of new plastered surfaces of wall and applying two coats of white wash on wall, complete all as specified and as directed.

M&L for preparation newly plastered surfaces and providing 3 coats of white wash. complete all as specified and as directed.

M& L for prepartion of new plastered surface of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered wall surface of any description, width or girth, and applying two coats of OBD over a coat of primer complete all as specified and as directed.

M&L for preparation of new plastered wall surface of any description, width or girth, and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, in soft/disintegrated rock complete all as specified and as directed.

Removing excavated material n.exc 50m and depositing where directed at a level n exc. 1.5m above the starting point of soil complete all as specified and directed

Removing the excavated surplus soils exceeding 50mtr but n.exc 250 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point,complete all as specified and as directed.

M&L hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. watered and rolled/rammed to a true surface ,complete all as specified and as directed.

M&L for 75 mm thick (1:4:8) Plain Cement concrete type D 2 (using 40mm graded stone aggregate) as in foundation, sub base of floor etc, complete all as specified and as directed.

M&L for 100 mm thick (1:4:8) Cement concrete type D 2 (usiong 40mm graded stone aggregate)as in foundation, sub base of floor etc, complete all as specified and as directed.

M&L for 50 mm thick Plain cement concrete (1:2:4) type B 1 (using 20mm graded stone aggregate)as in floor finish, complete all as specified and as directed.

M&L for Non skid (Mat Finish) ceramic coloured tiles 10mm thick (square/ Rectangular) size of each tile (1200x600) mm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 20 mm thick screed bed or bedding of layer in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured cladding tiles of size (600 x 300 x 7-8) mm thick, on vertical surfaces of walls such as skirting dado Incl highlighter/pattern etc. (As approved by GE), set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed.

M&L for colour Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar (1:6) complete all specified.

M&L for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.09 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

M&L for coloured non-skid tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for coloured vitrified double charge tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18sqm but not exc 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM (1:)4 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 7-8mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) 75 mm thick in plinth protection, laid in alternate bays not exc. 3.0m in length, finished surfaces even and smooth without using extra cement complete all as specified and as directed.

S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed.

S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed.

M&L for cutting chases, pinning in making good to faces where required and pointing in cement mortar (1:3) ends or edges of landings, steps, cills, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting n.exc 10cm girth on brick wall complete all as specified and directed.

M&L for 12 mm thick toughned frosted glass as in doors, partitions automatic doors and similar work incl cutting to shape, drilling holes as required incl necessary Stainles Steel frame work/fittings, including 2 Nos 300mm SS handles, locking device atc complete all as specified and directed. Note:- Hydraulic floor spring measured and paid separately

M&L for 12 mm thick toughned frosted glass as in cubical partion including cutting to shape, drilling holes as required incl necessary SS frame work/fittings, etc complete all as specified and directed.

Supply only 3 mm th Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and as directed.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc. Section - 63 x 25mm, No- 14001, complete all as specified and directed.

M & L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket,etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified and as directed.

M & L for powder coated Anodised aluminium window shutters, any type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and as directed.

S&F anodised powder coated ventiator with louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M complete all as specified and as directed

S&F in aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wre, average width of aperture 1.40 mm using 'Jindal" aluminium section complete all as specified and directed by Engr-in-Charge.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed

M & L for 105 x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

M & L for Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, 125 x 60 mm complete, as specified, including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S & F 40 mm thick second class hard wood Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers. complete all as specified and as directed

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24,complete all as specified and as directed.

S & F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to ·receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters with wire mesh as specified in SSR Part I, section 8, clause 8.24 (shutters shall be supplied and fitted to chowkats. complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, vtater/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and lengrh complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall bepaid for separately).complete all as specified and as directed Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and wdth of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

All as per Ser. item No. 88.00 above, but with double rebate of size 125mm × 50mm, complete all as specified and directed.

S&F for 35-40mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second' class hard v-10od plain cover fillets 35X6mm all around the shutters complete all as specified and directed.

S&F in stainless steel peg set of five pegs, fixed/welded/soldered on stainless steel base plate of size 100mmx30mmx2.5 mm and fixed with stainless steel screws, rowel plugs as per the sample approved complete all as specified and directed.

S&F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc complete all as specified as directed.

S & F shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves complete all as specified and directed.

S & F continuous(piano) hinges, stainless steel, width of flaps (when open) in 20mm/30mm, 0.8mm thickness complete all as specfied & directed.

S&F 1mm thickness of laths steel rolling shutters, with out ball bearing, as specified including top anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete: push pull or manual type complete all as specfied & directed.

S & F 300mm size aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy complete all as specfied & directed.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and as directed.

S&F butt hinges 100mm, medium weight complete all as specified and directed.

S&F 300mm Mild steel helical door spring, ordinary rat tail rod pattern springs,including roller and roller plate complete all as specfied & directed.

S&F 25mm dia, harrison rails (Curtain rod), Anodised aluminium with and including bracket / wall to wall 02 Nos of each opening complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed bed of CM (1:6) complete all as specified and directed.

M&L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge,such as in steps, cooking platform and other similar situations complete all as specified and directed.

M&L for machine cut 20-25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing in cement mortar,complete all as specified and directed.

M&L for providing and fixing vitreous china premium first-quality floor-mounted wash-down water closet (EWC) of size 370 x 670 x 720 mm, with UF soft close seat cover, in white/ivory/off-white shade, including flush cistern with all fittings, health faucet with two-way bibcock, and all necessary accessories,complete all as specified and directed. Make: Jaguar Model No.: LYS-WHT-38851S 300 UFSMN

M& L for vitreous china single-piece pedestal pattern water closet in white color, with matching seat cover, including cast iron ‘P’ or ‘S’ trap, connection to trap, cement concrete, and making good to floor,complete all as specified and directed. Make: Jaquar, Cat. Part No. CNS-WHT-851, or equivalent in Kohler / Roca.

M& L for vitreous china wash down water closet pan (pedestal pattern), EWC white, including trap connection to drain (outgoing pipe) and flushing pipe, antisiphonage pipe, PVC jet, 450–1600 mm long PVC connection, and plastic water closet seat in off-white color.Back closed pattern with flat bottom and cover, with mild steel chromium plated or aluminized hinging device,complete all as specified and directed.

M& L for vitreous china counter top basin in white color (thin rim), rectangular shape of size 550 mm x 380 mm x 110 mm, fixed in position including waste coupling and PTMT bottle trap, 32 mm dia,complete all as specified and directed. Make: Cera, Model BEIGE, Cat. Part No. S2020158BG or equivalent.

M & L for vitreous china flat back type wash basin, white color, size 550 mm x 400 mm, including brackets and waste pipe,complete all as specified and directed. Make: Jaquar, Cat. Part No. URS-WHT-13253N, or techno-commercial equivalent in Kohler / Roca.

M& L for vitreous china wash hand basin, white color, bowl size 550 mm x 440 mm, including waste coupling and PVC waste pipe (32 mm dia), pillar tap made of cast copper alloy with capstan heads, chromium plated fancy 15 mm bore, fixed with mild steel brackets,complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1 mm thick, overall size 914mm x 460mm, bowl size 405mm x 330mm x160mm for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed.

S& F automatic ABS basic hand dryer of size 240 x 230 x 240 mm, including all necessary fixing accessories, complete all as specified and directed. Make: Dolphy, Model No. DAHD0011.

S&F 5 mm thick glass mirror with decorative high-bright LED strip and touch switch for LED light, double-coated for protection and longevity with silver plating at back for better reflection, size 800 mm x 600 mm, fixed to wall with all necessary fixing arrangements, complete all as specified and directed. Make: Cera, Cat. Part No. B3530105, or equivalent make.

S&F quarter turn single lever pillar cock with aerator suitable for 15 mm bore pipe long body fancy type brass CP screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified and directed. Make: Cera Cat Part No F1018101GG or equivalent make.

S&F in pillar taps(15mm), cast copper alloy with capstan head, cromium plated, screwed down high pressure.with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed and fancy tvpe,complete all as specified and directed. (Make Jaquar cat part no:FLR-5015 or equivalent model in KOHLER and ROCA.)

M&L for 10 mm thick Gypsum board (mositure resistant) seamless as in the ceiling/ linning fixed with counter sunk screws on and incl GI channels frame work of stardard section as per manufacture,s instructions, fixed @ 1.2 m in one direction and 45 cm in center to center in other direction with necessary fixing arrangment at their junction point at desired heights below roof slab and incl two coats of plastic emulsion paint over a coat of primer on exposed surfaces. (The frame work shall be fixed with the help of GI suspenders of suitable size with the help of sash fasteners and along wall, making good disturbed surfaces, smoothening the gypsum board, POP lining at joints as required complete all as specified and directed.

M&L for POP cornices for seamles false ceiling incl necessary hanging arrangments etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / walls, complete all as specified and as directed.

S&F 75 mm dia, PVC (SWR) soil, waste and vent pipes, in any length, single socketed, jointed with rubber ring joints/adhesive, laid in trenches or in floors, ISI marked complete all as specified and directed

S&F 110mm bore, PVC (SWR) bends, any radius complete all as specified and directed

S&F 75 mm bore, PVC (SWR) bends, any radius complete all as specified and directed

S&F 110mm bore, PVC (SWR) branch piece (single ‘Y’) equal or unequal complete all as specified and directed

S&F 110mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door for pipe complete all as specified and directed

S&F 110mm dia PVC vent cowl, complete all as specified and directed

S&F 110 mm dia, PVC (SWR) soil, waste and vent pipes, in any length, single socketed, jointed with rubber ring joints/adhesive, fixed to wall, with PVC clamps, ISI marked complete all as specified and directed.

All as per Ser. item No 131.00 above but with75mm dia complete all as specified and directed

S&F 110 mm bore, PVC (SWR) junction (Single T) or equal, complete all as specified and directed.

S&F 75 mm bore, PVC (SWR) junction single (Single T) or equal, complete all as specified and directed

S&F 75mm dia PVC vent cowl , complete all as specified and directed

S&F 110mm dia PVC vent cowl of complete all as specified and directed

S&F stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm dia of bore complete all as specified and directed

S&F side handle two-way bib tap with wall flange, quarter turn, suitable for 15 mm bore pipe, long body fancy type, made of brass chromium plated (CP), screwed down for iron pipe or brass ferrule, complete all as specified and directed Make: Cera, Cat. Part No. F1099161 or equivalent as per Appx ‘A’ approved by GE.

S&F CP bib tap, cast copper alloy, with crutch or butterfly handle, screwed down for iron pipe or brass ferrule, fixed, fancy type, suitable for 15 mm bore pipe, long body with flange, complete all as specified and directed Make: Jaquar, Cat. Part No. FLR-5047N or equivalent in Kohler / Roca.

S&F brass CP wall mixer 3-in-1 type for mixing hot and cold water with provision for both hand shower and overhead shower, complete with 115 mm long bend pipe, connecting legs, and wall flange, fixed complete all as specified and directed

SS&F 15 mm bore chromium plated angle cock, fancy type, complete all as specified and directed Make: Jaquar, Cat. Part No. FLR-5053N or equivalent in Kohler / Roca.

S&F two-way bib tap with wall flange, quarter turn, suitable for 15 mm bore pipe, long body fancy type, brass CP, screwed down for iron pipe or brass ferrule, complete all as specified and directed.

S&F hand shower (health faucet) made of cast copper alloy, chromium plated, with 8 mm dia 1.2 m long flexible tube and wall hook, complete all as specified and directed. Make: Cera, Cat. Part No. F8030103 or equivalent.

S&F 2-way bib cock with wall flange,suitable for 15 mm bore pipe, long body fancy type, brass CP, screwed down for iron pipe or brass ferrule complete all as specified and directed Make: Jaquar, Cat. Part No. FLR-CHR-5041N or techno-commercial equivalent in Kohler / Roca.

S&F health faucet (ABS body), mild steel chromium plated, suitable for 15 mm dia pipe, with 1.0 m long flexible tube and wall hook, including connections and fixing in position complete all as specified and directed Make: Jaquar, Cat. Part No. ALD-CHR-577 or equivalent in Kohler / Roca.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F angle valve, cast copper alloy (ISI marked), chromium plated, high-pressure type with capstan head, screwed both ends for iron pipe, 15 mm bore dia, complete all as specified and directed Make: Cera, Cat. Part No. F1014201 or equivalent as per Appx ‘A’ approved by G

S&F 75 mm bore PVC (SWR) floor trap, plain with CP grating, including jointing with solvent cement to waste pipe fixed in cement concrete (1:2:4, type B1) using 20 mm graded stone aggregate, complete all as specified and directed

M&L for PVC (SWR) 50 mm floor trap, plain, with outlet connection, including jointing with solvent cement, complete all as specified and directed

S&F brass chromium plated towel rail, complete all as specified and directed. Make: Cera, Cat. Part No. F5012104CH or equivalent as per Appx ‘A’ approved by GE.

S&F tubular towel rail, 20 mm dia, D-type, 600 mm long between flanges, complete all as specified and directed Make: Jaquar, Cat. Part No. AKP-CHR-35711PS or equivalent in Kohler / Roca.

S&F tubular towel rail, 20 mm dia, D-type, 600 mm long between flanges, complete all as specified and directed.

S&F brass chromium plated towel ring, complete all as specified and directed Make: Cera, Cat. Part No. F5013115CH or equivalent as per Appx ‘A’ approved by GE.

S&F towel ring made of PTMT, fixed with chromium plated brass screws and wooden/plastic cleats (minimum weight 90 gms), complete all as specified and directed

S&F toilet paper holder made of stainless steel, complete all as specified and directed Make: Cera, Cat. Part No. F5007110 or equivalent.

S&F soap dispenser made of glass, complete all as specified and directed Make: Cera, Cat. Part No. F5003111 or equivalent.

S&F brass chromium plated shower rose, 125 mm dia, fitted to steel pipe or union, complete all as specified and directed Make: Jaquar, Cat. Part No. OHS-1989 or equivalent in Kohler / Roca.

S&F brass chromium plated waste coupling, 32 mm dia, for urinal and wash hand basin, complete all as specified and directed

S&F soap dish, vitreous china white, approx. size 160x160x90 mm, fixed to wall with CP brass screws, complete all as specified and directed.

S&F corner glass shelf with brackets, size 225x225 mm, complete all as specified and directed Make: Jaquar, Cat. Part No. ACN-BCH-1173 or equivalent in Kohler / Roca.

S&F 15 mm dia PVC connection, 450 mm long, with PTMT nuts at both ends, complete all as specified and directed

S&F cast copper alloy CP shower arm, square, 230 mm long, with flange, complete all as specified and directed.

S & F 100 mm dia PVC (SWR) bends complete all as specified and directed.

S&F gun metal globe or gate valve with iron wheel head, screwed both ends for 25 mm bore iron pipe, ISI marked, complete all as specified and directed

S&F gun metal globe/gate valve, 20 mm dia, with iron wheel head, screwed both ends for iron pipe, fixed complete all as specified and directed

S&F 20 mm bore PVC brass valve, high pressure, with polythene float and fly nut, complete, screwed for iron pipe or brass ferrule. complete all as specified and directed

S&F sensor-based vitreous china urinal, half-stall type, white, including brass chromium plated (CP) 32 mm bottle trap and CP brass spreader with 15 mm dia pipe; complete with provision and fixing of plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, and providing flush pipe, grating, and union for discharge pipe, complete all as specified and directed. Make: Jaquar Cat Part No. WHT-13261H or equivalent.

S&F 18 mm thick UV coated exterior grade MDF board in any colour duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. complete all as specified and directed.

S&F for HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size as in cupboards/shelves/cabinets and similar work etc complete all as specified and directed.

S&F stainless steel magnet catch fixed with self tapping screws complete all as specified and directed

S&F rotational moulded polyethylene water storage tank 3 layer white colour water tank, non- toxic effect, algea formation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) of capacity 1000 litres, cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 3 layer white colour water tank, non- toxic effect, algea formation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

M&L for water proofing treatment to RCC roof slab complete all as specified below and as directed by engineer-in-charge including testing :- (a) 10mm thick rendering in cement mortar (1:3) mixed with and including integral water proofing compo nd @3% by weight of cement on roof slab finished even and f.air complete (b) on the dried plastered surface, one coat of approved bituminous primer@ 0.7 kg/Sqm shall be applied. (c) On this prlmered suface,APP modified bituminous memberance 3mm thick with no woven polyster mat as reinforcement weighing not less than 3.6Kg/Sqm with plain finish shall be laid bytorch application method (d) Apply two coat of bituminous aluminium paint @0.15Kg/Sqm. (e)The overlap while torching shall be 100mm at the longitudinal edges and 150mm at the ends.(f) The treatment shall be carried as per manufacturer instructions through authorised applicators. NOTE: Necessary bypass arrangment has to be made for supply of water during roof treatment work by the contractor without any extra cost.

Supply only Liquid water proofing compound ISI marked complete all as specified and as directed.

M&L for providing polythene film, black, 50 micron thick, laid over floor surface as a damp-proof membrane, jointed with minimum 100 mm overlap and properly sealed to prevent moisture penetration , complete all as specified and directed.

S & F 125/110 mm, PVC /SWR) nully trap setting and jointing with solvent cement, complete all as specified and directed.

Supply only integral water proofing compound ISI marked, complete all as specified and directed.

Supply and fix hume pipe of 900 mm Dia to septic tank, 2.5Mtr length including necessary excavation in any type of soil , returing filling and removing of soil, fixing of RCC vent pipe minimum height of 2.0 Mtr and dia of pipe 100 mm , cowl , RCC covers & connecting to the incoming sewer lines and connected to soak pit complete all as specifed and directed .

M&L for Brickwork with subclass ‘B’ bricks, in circular well staining (any radius) constructed from the base built in CM (1:4) complete all as specified and directed

M&L for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM (1:4) complete all as specified and directed

M&L for loose filling with broken bricks aggregates of gauge 40 to 80 mm in soakage pits, soakage well,complete all as specified and directed

M&L for formwork to edges of concrete flat treads and sided of RCC floor and roof exceeding 10 Cm wide and not exceeding 20cm, complete all as specified and directed

M&L for reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams etc complete all as specified and directed

M&L for Plain cemedn Concrete (1:3:6) type C2 (using 40mm graded stone aggregate) concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150mm dia of bore pipe complete all as specified and directed.

M&L for 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition of existing old one (salt glazed earthware, AC or reinforced pipes etc) set in cement mortar complete all as specfied and directed.

M&L for pre-cast cement concrete block masonry with solid blocks exc10cm in width,type C-1,(1:3:6) (using 20mm graded stone aggregate) and setting in cement mortar (1:6) complete all as specfied and directed.

M&L for Plain cement concrete type B-1, (1:2:4) (using 20mm graded stone aggregate) as in copings, kneelers, apex stones,bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specfied and directed.

Extra for forming fair finished drain or channel in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc. complete all as specfied and directed.

S&F factory made 50mm thick, 950mmx650mm manhole cover with additional frame for fixing, of fixing of pre cast RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement MS TMT bars 8mm dia @ 125mm centre to centre bothways and set in CM (1:4) and handles including demolition of RCC (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

M&L for providing precast RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in Manholes covers set in CM (1:4) complete all as specfied and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 cu.m, getting out, retuning, filling in and ramming earth broken rubble mixed with earth around, in layers not exceeding 25 cm in soft / loose soil. complete all as specfied and directed.

S & F Fe-290(Gde E-165) Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work , complete all as specfied and directed.

S & F Fe 410-W(Gde-E- 250)quality-A Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and fix mild steel work in tubular trusses, beams, rafters, purlins, main columns, posts etc., for structural work including special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes conforming to IS: 4923-1997 grade St.-240 fixed with angle cleats or other connecting plates complete all as specified and as directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified complete all as specified and directed.

M & L for preparing new surface of steel & iron work of any description exc 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer. complete all as specified and directed.

M&L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

M&L for machine pressed precast cement concrete coloured interlocking paver blocks, ISI mark, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 80mm thick, conforming to IS 15658-2006, M-40 with grey cement and pigments grade in floor/ paths/ pavement laid over and incl 25 mm thick sand cushioning laid dry to the profile including filling the joints with sand complete all as specified and as directed.

M&L for machine pressed precast cement concrete coloured interlocking paver blocks, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ paths/ pavement laid over and incl 25 mm thick sand cushioning laid dry to the profile including filling the joints with sand complete all as specified and as directed.

M&L for 200mm dia RCC pipes class NP-3 with socketed ends laid and jointed complete with rubber ring joints, complete all as specified and as directed.

M&L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in bed to drain pipes including forming cradles for 200mm pipe.complete all as specified and as directed.

M & L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed by Engr-in-Charge.

Cutting into existing manholes for connecting new drains of 300 mm dia of internal pipe making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 Section) in cement concrete (1:2:4) type B-1 smooth finished, and reforming benching as required, complete all as specified and as directed.

cutting into existing manholes for connecting new drains of 150 mm internal dia of pipe making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1, smooth finished and reforming benching as required complete all as specified and as directed.

S&F mild steel framed work such as posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work including welding conforming to Fe-290-0 & grade E-165 etc complete all specified and directed

Supply only chain link MS galvanised fencing including line wire100x100 mm mesh (5-6 mm) size and any type of strands, rails, straining bolts etc including provn of binding wire,complete all as specfied and directed.

Fixing only chain link fencing including line wires, any mesh, size 100x100 mm mesh (5-6 mm) size, straining bolts etc including provn of binding wire, complete all as specfied and directed.

S & F 12mm dia of shank mild steel screw bolts (machine made ) with hexagonal or squae heads at one end and screwd the other, each screwed end to be fitted with washers and one hexagoanl or square nut, n exc 15cm long complete all as specified & directed

S & F 2 strand barbed wire galvanised, 2.24mm dia barbed 2.00mm dia barbed at 75mm spacing and straing and fixing to any type of standared rails staining bolts, including,securing or tying at crossings with and provision of galvanised mild steel wire, stables or steel pins,etc complete all as specified & directed.

M & L for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surface of any description,n exc 10cm in width or girth when un connected with other painted or when painted in a different sahde, complete all as specified and directed.

M&L for forming contraction (Dummy) joints 30mm deep x 10mm wide, filled with sealing compound complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 (using 12.5mm graded broken stone aggregate) averaging 50mm thick as in leveling course on roof slab including finishing the surface of concrete even and fair to receive screed complete all as specified and as directed.

E&M PORTION M&L for concealed point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked duly drawn through PVC conduit concealed in wall / floor/ceiling along with suitable fittings and conduits of appropriate size as per specification as required at site and as directed of medium duty ISI marked including all accessories etc. with MS termination boxes as required at site and as directed including modular frame/cover plate suitable for mounting switches/sockets etc. ISI marked and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following:- Note :The rate shall be deemed to include circuit wiring, cutting and chasing, and making good all disturbed surfaces, complete.

(a) One light point controlled by one switch complete all as specified and directed.

(b) One 3 pin socket outlet, 5 Amp socket outlet on same board with other switches.complete all as specified and directed.

(c) One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board, complete all as specified and directed.

(d) One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed

All as per Ser. Item No 217.00 above, but for one 3 pin 15 Amps socket outlet independent, using FRLS-H PVC insulated unsheathed, multistranded copper conductor cable 2.5 sqmm drawn through and including PVC conduit of min 20 mm dia by Cutting chases for conduits and sinking's for boxes and making good to walls, floors etc for concealed conduit wiring with modular flush box metal of GI sheet minimum 1.2 mm thick (ISI Marked) with earth terminal for safety, flush metal GI box of required modules as per site requirement and modular plate with support frame white in colour (ISI Marked) of required modules, 3mm thick including all fittings i.e. tees, bands and junction boxes, screws etc. complete for power point controlled with cables, 2.5 sqmm size (2.5 Sqmm for Phase and neutral and 2.5 Sqmm for earthing)

S&F socket out let 5/ 6 Amps 3 pin modular type including connection complete all as specified and as directed

S&F bell push modular 6A switch complete all as specified and directed.

S&F Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed.

S & F Fan regulator modular step type suitable for BLDC fan complete all as specified and directed

S&F modular Switch fabio classic white series/ Switch fabio classic white with indicator, ISI marked 6 AX Amps One Way switch complete all as specified and directed. (Make:- Cat Part No AHFSXXW061 of Havells or equivalent in Indoasian/ Legrand/ Anchor/Crabtree/ Anchor / Roma)

S&F modular switch single pole one way 5/6 Amps including connection complete all as specified and as directed

S&F Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed.

S&F modular Switch fabio classic white series/ Switch fabio classic white with indicator, ISI marked 16 AX Amps One Way switch complete all as specified and directed. (Make:- Cat Part No AHFSXXW161 of Havells or equivalent in Indoasian / Legrand / Anchor / Crabtree / Anchor / Roma)

S&F modular socket outlet fabio series 6 Amps 3 pin universal socket with child safety shutter, Shrouded terminals compatible with all standard mobile chargers, ISI marked for the same board complete all as specified and directed. (Make:- Cat Part No AHFKPXW063 of Havells or equivalent in Indoasian / Legrand / Anchor / Crabtree / Anchor / Roma)

S&F modular socket (Fabio classic white) outlet 16 Amps shuttered socket (heavy duty) 3 pin unversal socket with child safety shutter, Shrouded terminals, ISI marked for the independent board complete all as specified and directed. (Make:- Cat Part No AHFKCXW253 of Havells or equivalent Havells / Indoasian / Legrand / Anchor / crabtree/Anchor/Roma)

S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed.

S&F Sheet Metal enclosure double door for DBs when MCBs to be used SPN-8 Way with 200 Amp rated bus bar complete all as specified and directed. (Make:- Cat Part No 811818 of Indoasian or equivalent Havells/Indoasian/Legrand/Anchor/Roma)

S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed

S&F Double door Sheet metal enclosures vertical type, factory made DBs 4 way, (VTPN DB's) 415 volts with provision of 63 Amps MCCB 25 KA protection class IP-43, suitable for fixing 4 pole RCCB/MCCBs, Isolators etc including prewired, confirming as per IEC 61439-3, suitable for flush mounting and surface mounting; with 200 Amps rated copper Bus bar, with Neutral bar, earth bar and cable lies for Cable management, fully shrouded, neutral bars, prefitted masking sheet, complete all as specified and as directed.

S&F amp rating 240V, 10KA curve 'C' miniature circuit breaker (MCB) SPN and current carrying capacity 40 Amps in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

S&F amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of SP 6 to 32 A in the MCB DB complete with connection testing and commissioning Complete all as specfied and directed.

S&F amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of SP 32 A in the MCB DB complete with connection testing and commissioning Complete all as specfied and directed.

S& F amp rating 415V, 10KA C curve miniature circuit breaker (MCB) of TPN 40 AMP poles and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

S&F TP/FP 32 A MCB 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning,complete all as specified and as directed

S&F of MCB TPN DB 4 way IP-54 with 200A bus bar, neutral link, earth bar and Din rail ,230 Volts with double door, concealed in wall and making the surface good to match with adjucent complete all as specified and as directed

S & F MCCB 4 Pole, current rating 63 Amp, adjustable over load and short circuit with Micro processor release setting , breaking capacity 36 kA at 415V, 50Hz, incl necessary spreaders / cable lugs / nut, bolt and washers if required complete all as specfied and directed. (Make : L & T Cat No CM93003OOOOX1 or equivalent in Legrand / Schneider

S&F modular Ceiling rose, 3 phase PVC / polycarbonate, isolated body 50 x 65 mm surface type complete all as specified and directed. (Make:- Cat Part No AHLHXCW000 of Havells or equivalent Havells/ Indoasian / Legrand / Anchor / Crabtree / Anchor Roma)

S&F only LED lights fitting 20W LED 6000K (4Ft), 220V,AC decorative box type with driver, Aluminium extruded (Intervertor tubelight fittings) holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S & F LED down light recess mounted luminare, round type 15 watts with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150 V-270 V AC, 50 Hz,complete all as specified and directed. (Make- Philips Cat Part No DN172B LED9S-6500 PSU, Jaquar nero plus LNRP01R012XN or Havells)

S&F LED tube lights 4 feet fitting 1x 20W, 220V, aluminium housing body connecting up with flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting 2 feet, 10 watt 220 V AC aluminium housing body including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector, making good disturbed surfaces complete all as specified and as directed. Make Jaquar cat No -LGLZ01X010XW , Orient Cat No- LBLN-10-C-SQ

S&F LED bulb 9 Watt white in colour,including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed

S&F BLDC ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 225 meter cube per min, powder coated, with remote, 350 RPM, 30 Watts with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) → ISI marked complete all as specified and directed. (Note : Quoted Rate is deemed to be inclusive of Stickering / Marking / writing of MES numbers in bottom of ceiling Fan)

S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. (Note :- Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).

All as per Ser. item No 249.00 above but of size 2.5 sqmm complete all as specified and directed.

All as per Ser. item No 249.00 above but of size 1.5 sqmm complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm complete including cutting of wall if necessary to fit the fan complete all as specified & as directed.

S&F exhaust fan, AC single Phase, working on input voltage 140-285, of size 250mm sweep, 1600 RPM, Power consumption16 W with BLDC Motor, blades, frame and louvers provision of 3 core 1.5 sqmm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/ connector to fan including making connections complete all as specified & as directed .

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 2 core, complete all as specified and directed

Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm and 4 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete as all specified and directed.

Supply, lay, joint, test and commissioning of LT under ground cable 1100 volt grade, XLPE cable of 35 Sqmm 3.5 Core, insulated and PVC sheathed heavy duty armoured with aluminium conductor, IS 7098-I Marked, Laid in trenches/ ducts/ fixed on poles / walls / laid under roads/ paths/ drains/ culverts or encased in GI pipe including cable glands, lugs jointing material etc complete all as specified and directed.

Supply, install, Testing and Commissioning Electric water heater storage (Geysers) , Shock resistant , ABS outer body, steel / glass lined , inner tank PUF insulated and efficient long life copper heating element, white colour, tank design is suitable to withstand minimum 6 bar pressure and of capacity 25 Litre, BEE 5 star rated complete with including all accessories such as safety valve, thermostat, Heating element, NRV etc complete all as specified and directed . (Note :- The quoted rate shall include heavy duty Super high tensile stainless steel hose pipe with brass ferrule fitting for 'HOT' and 'COLD' water connections with all fittings complete)

S&F geyser box moudular type consists of sunken box with MCB 20A , plug top with indication complete all as specified and directed. (Note : The quoted rate shall include necessary cutting chasing and making good to disturbed surface complete)

S&F of geyser Bolt 120mm Long with nut & washers, complete all as specified and directed.

S&F Sheet metal enclosure with socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode of size 60cm X 60 cm X 6 mm buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5 m below the normal ground level connected to GI earth strip 32 X 6 mm dia GI earth lead as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, protected by GI pipe light grade 40mm bore all as shown on electrical plate No 3 of SSR Part-I connected to earth test point electrode, PCC pit with RCC cover, funnel with wire mesh, watering pipe 20mm dia protection pipe etc and testing on completion complete including removal of old unsv earthing material all as specified and directed. Note No 1 :- The unit rate shall also include for earth work in hard/dense soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B-1 cover 50 mm thick reinforced with 8 mm dia TMT bar @ 150 mm c/c both ways, funnel with watering pipe 20 mm dia medium grade, GI protection pipe light grade 40 mm dia and wire mesh complete.

S&F Door Three Phase 63 Amp IP44 Mini Feeder Pillar, TPN, 6 Way, Three Phase, Double Door, 440 V,TPN, IP44, Floor Mounted, Vertical type red in color double door floor mounted outdoor type, CPRI Approved as per IP-65 grade, made out of CRCA sheet 3.00 mm thick of outer body of suitable size with aluminium bus bar (50 x 10 mm) should have danger notice for 415 volts, AC, mounted on 50x50x6 mm angle iron frame having minimum 2 feet ground clearance duly embedded in and including PCC block (1:2:4) type B-1 foundation for fixing of panel complete including termination of all incoming and outgoing cables with suitable size thimbles/lugs and glands, Nuts & Bolts, Washers complete

Supply and laying 50 mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS-14930 part-II with antirodent and non flame propagating properties plate with fittings for cable protection complete all as specified and as directed.

Supply and laying 40mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS-14930 Pt-II with antirodent and non flame propogating properties plete with fittings for cable protection complete all as specified and as directed.

Supply and laying 50 mm dia medium grade galvanized pipe with all fitting such as tee, bends, union elbow reducer in trenches, walls, roof etc including fittings,complete all as specified and as directed.

Supply and laying 25mm dia medium grade galvanized pipe with all fitting such as tee, bends, union elbow reducer in trenches, walls, roof etc including fittings,complete all as specified and as directed.

S&F 50 mm size gunmetal gate valve with iron wheel screwed both ends for iron pipe and fixed, complete all as specified and as directed.

Supply and laying straight plain brass ferrule (or connecting screw) screwed both ends and fixed suitable for 50 mm bore GI water tubing for tapping on line existing pipe line complete all as specified and directed

M&L for Cutting of road/hard standing and making good with PCC (1:2:4) using 20mm graded stone aggregate complete all as specified and directed.

M&L for Cutting of exisitng pipe, threading and insertion of 20mm pipe including all GI fittings complete all as specified and directed.

M&L for cutting the existing GI tubing of size 40/32 mm dia for taking new connection of 25mm dia GI pipe with all fittings complete all as specified and directed.