Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC H NO 154 VILLAGE SHIKARPUR PO NAJAFGARH NEW DELHI 110043 | WEST | DELHI | 110043 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹45.5 L+₹5.5 L (13.7%)Rejected-Finance G 124 FLAT NO 4 DILSHAD COLONY DELHI 110095 | SHAHDARA | DELHI | 110095 | L2 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 3 | L3₹46.9 L+₹6.9 L (17.1%)Rejected-Finance | L3 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 4 | L4₹49.8 L+₹9.8 L (24.4%)Rejected-Finance N A | NA | NA | 121004 | L4 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 5 | L5₹53.1 L+₹13.1 L (32.8%)Rejected-Finance | L5 | Rejected-Finance BEING OTHER THAN LOWEST |
Tender Value
₹49.5 L
EMD Value
₹99,100
Closing Date
3 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
CERTAIN REPAIR/ MAINT WORKS AT DGRR OFFRS TRANSIT FACILITY AT PRATAP CHOWK, OFFICE AREA AT RPSO COMPLEX, PETTY REPAIR AND MAINT WORKS AT DGNCC CAMP AND PARADE ROAD, MALL ROAD, POLO ROAD, AND CERTAIN OTHER OTM/MD ACCN IN THE AOR OF AGE B/R-I UNDER GE
2023_MES_606806_1
GE/DE-43/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹99,100
Yes
2 Sept 2023
29 Jun 2023
7 Aug 2023
29 Jun 2023
3 Aug 2023
20 Jul 2023
Amount
S&F in repairs 15mm PTMT Pillar taps cast copper alloy fancy type chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore all as specified and directed.(Make : Prayag/Prince/Gem)
S & F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Make : Prayag/Prince/Gem)
S & F in repairs Flushing cistern pipe bend fixed complete all as specified and as directed.
S&F in repairs 32 mm bore PVC waste pipe of approved make suitable for WHB, Urinals and Sink etc all as specified and directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
S & F in reapir 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket and flush pipe etc complete all as specified and directed
S & F in repairs Polyethalene syphon kit assembly (Cascade Type/Wall Hung/Floor Mounted as required) for flushing cistern, fixed in repairs, complete all as specified and as directed.
S & F in reapir flushing cistern handle complete all as specified and directed
S & F Vitreous china urinal (White/Off white) type size 475mmx315mmx715mm fixed in repairs including all fixing accessories, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. URS-WHT-13259, Jaquar-Cat No URS-WHT-13263,Hindware -Dyna Standard Urinal
S&F in repairs 75mm dia brass chromium plated shower rose with neck and swivel joints fancy type suitable for 15mm bore GI pipe all as specified and directed.
S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.
S&F in repairs 15mm CP Pillar taps cast copper alloy fancy type chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore all as specified and directed.
S & F in repairs Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP.
S & F in repairs Brass chromium plated wall mixture 3 in 1 system with provision for hand shower and overhead shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-281KN, Jaquar-Cat No. COP-281PM Kohler-Cat No. K-98754IN-4-CP.
S & F in repairs Angle valve of CP brass high pressure screwed for iron pipe and fixed, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S&F in repairs health faucet chromium plated brass with 1.00m CP long flexible pipe and brass chromium plate nuts completed all as spd Make - Cera Cat No. F8030103 / Hindware Cat No. F 160068 CP / Jaquar Cat No. ALD- 573 or equivalent approved by GE
S & F CP brass jet spray for EWC with 1mtr long flexible stainless steel connecting pipe 15mm bore, fixed in repairs, complete all as specified and as directed.
S & F in repairs Toilet paper holder chromium plated with flap all as specified and directed.
S&F in repairs Stainless Steel grating plate with central hole 125mm dia suitable for Nahani trap or in any place complete all as specified and as directed.
S & F in repairs 20mm dia Chromium plated towel rail 60cm long fixed to wall including all fittings for fixing complete all as specified and directed.
S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
S & F in repairs glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
S & F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.
S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.
S & F in repairs 25mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.
S & F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected.
S & F in repair vitreous china pedastal pattern water closet (EWC) including flush pipe & seat cover 'P' or 'S' trap complete all as specified and directed.
S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.
S & F Rotational moulded polyethylene water storage tanks 2000 lts capacity, tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.
S & F Rotational moulded polyethylene water storage tanks 5000 lts capacity, tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.
S & F in repair vitreous china wash basins , flat back size 550x400 mm white excluding taps,waste coupling and pipe but including brackets all as specified and directed.
S&F in repairs 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.
S & F in repair 15mm galvanised iron medium grade short fittings such as Socket, Elbow, Nipple, Tee, Tee Reducer, Elbow Reducer, Union, double nipple etc (ISI marked) complete all as specified and directed.
S & F in repair 20mm galvanised iron medium grade short fittings such as Socket, Elbow, Nipple, Tee, Tee Reducer, Elbow Reducer, Union, double nipple etc (ISI marked) complete all as specified and directed.
S & F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.
S & F tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F 20mm outer dia CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fittings ISI marked on walls/ceiling or laying in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F tubing 25mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F Aluminium ( Die cast ) body door closer hydraclically regulated designation No. 3 universal type suitable for door shutters of 701 to 850mm in width and of weight between 61 to 80 kg, fixed in repairs, complete all as specified and as directed.
S & F floor mounter aluminum body door closer hydraclically regulated designation No. 3 universal type suitable for revolving type door of 701 to 1200mm in width and of weight between 61 to 80 kg, fixed in repairs, complete all as specified and as directed.
S & F 20mm dia Stainless Steel heavy duty hollow Curtain Rod as per required length at site over Door/Window/Ventilator including taking down old UNSV curtain rod with bracket and finials in any position and height complete all as specified and as directed.
S & F heavy duty designer/fancy type Stainless Steel curtain rod brackets fixing to 20mm dia curtain rod , type and pattern as approved by Engr-in-Charge or GE fixed with rawl plug and screws to wall or in any position complete all as specified and directed.
S & F heavy duty designer type Stainless Steel curtain rod finials fixing to 20mm dia curtain rod , type and pattern as approved by Engr-in-Charge or GE complete all as specified and directed. (Note for item No. 44 to 46 : Damage to Brick/stone or any type of wall and existing cement plaster/pointing during fixing of curtain rod/bracket/finial shall be make good and bring back to old position to be done by the contractor and the cost for the same shall be deemed to include in the quoted rate, No extra payment will be made for brick work, re-plastering and painting to the contractor.)
S & F in repairs Aluminum Anodised 150mm size barrel tower bolt stove enameled black with bright bolt complete all as specified and as directed.
S & F in repairs 150mm size aluminum adodised cast type handles complete all as specified and as directed.
S & F in repair for mild steel pressed oval type handles stove enamelled black for doors 150 mm long complete all as specified and directed.
S & F in repairs Floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece fixed in floor, over all length of cover plate 140mm complete all as specified and directed.
S & F in repair for 150mm long mild steel barrel tower bolts of extruded section complete all as specified and as directed.
S & F in repairs 250 mm long aluminium alloy anodised sliding door bolt with haps, stapple ( bolt type ) and fixing clips of sheet, cast of extraded sections and fixing bolts and sliding bolts of extraded sections or cast aluminium alloy complete.
Taking down aluminium door, window and ventilator shutter with frame upto 4Sqm each and refixing in same opening after necessary repair like securing glass beads, replacing handles, tower bilts, wiremesh replacing the broken glass and other minor repairs as required at site, complete all as specified and as directed. (Note : Cost of all fittings and fixtures required as per site shall be deemed to be included in the quoted rate of the item).
Cleaning old sewage lines any dia and cleaning of water with sludge from soakage wells with Mechanically operated 25 tonne truck mounted desludger with 12000Ltr capacity tanker having water fitted high pressure jet machine for cleaning and desludging of sewage line, soak wells, septic tanks etc., shall be used by the contractor as per scheduled programme in writing and completion of each job to the entire satisfaction of Engineer-in-Charge as instructed. (Note : (a) In case contractor fails to deploy the machine as per scheduled programme a recovery of Rs 1500/- per day shall be deducted from his payment. (b) Per day means 8 working Hrs in a day excluding standby period due to any reason.)
Hire charges for engaging 01No Carpenter, 01No Plumber, 02No Sweepers in 01 shift from 900 hrs to 1700 Hrs per day on all working days including Sundays and Holidays along with complete T&P. The engaged manpower shall report at Parade Ground Service Centre for further detailment to attend day to day complaints at DGNCC Camp.
M & L for precast cement concrete kerb stone type B-1 (20mm graded aggregate) of size 300x 450x200mm thick and setting in CM 1:4 complete all as specified and directed.
M & L for applying two coats of synthetic enamel paint, any tint on New/old painted plastered surfaces or brick, stone, concrete, asbestos cement or plastered surface exceeding 10cm width or girth including preparation of old painted surfaces and including 2-3mm wall care putty over a coat of primer complete all as specified and as directed.
M & L 16-18mm thick granite (Z black colour or any type as approved by GE) of any type work table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms and like in over 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding including demolition of existing granite complete all as specified and as directed .
S & F in repairs Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperature 1.4mm and fixed to doors and widows with necessary 12mm iron flats with welding and including dismantling of old wire cloth complete all as specified and directed. (Rates are inclusive of welding and supply of flats including reqd nutbolts wherever required)
S & F 3mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed including hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frame glazed with putty or fixed with beads.
S & F 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls or laid in floors as sanitary fittings, rain water pipes etc in any position including taking down sanitary pipes, eaves gutters and rainwater pipes (any size or pattern), in any type and position including all fittings,heads,shoes, bends, swan-necks, branch pieces, couplers, reducers, vent cowl, stack clamps etc. complete all as specified and directed.
S & F 110mm bore PVC (SWR) bends any radius complete
Taking down cement or cement lime plaster , any description on brick or stone walls, concrete surfaces (ceiling) etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified and as directed.
M & L rendering 10 mm thick on concrete surfaces such as ceiling/chajjas in CM 1:3, finished even and smooth without using extra cement including complete all as specified and as directed.
M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.
M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two coats of 100% Premium/Ist quality acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) over and including priming coat of exterior primer applied and 1mm thick wall care putty complete all as specified and as directed. Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes. 2. Make Shall be approved by GE. Make: BERGER (WEATHER COAT ALL GUARD), ASIAN PAINTS (APEX ULTIMA), NEROLAC (EXCEL TOTAL)
M & L Preparation of newly plastered /unplastered surfaces of walls and ceilings and applying 1mm thick Birla White/J K White wall care putty, again sand papering thus making surface good applying Two coats of Oil Bound Distemper on wall surfaces over a coat of primer complete all as specified and directed.
M & L for preparation of plastered or unplastered old decorated surfaces of wall and ceiling including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with Wall Care Putty and applying One coat of premium/Ist quality exterior acrylic emulsion paint of any tint all as per manufacturers instructions to achive desired finish at any height complete all as directed. Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes. 2. Make Shall be approved by GE. Make: BERGER (WEATHER COAT ALL GUARD), ASIAN PAINTS (APEX ULTIMA), NEROLAC (EXCEL TOTAL)
M & L for preparation of plastered or unplastered old decorated surfaces of wall and ceiling including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with Wall Care Putty and applying One coat of Oil bound distemper complete all as specified and directed.
M & L for Preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
M & L for Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.
S & F Aluminium powder coated windows including aluminum powder coated frames three track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 kg/RM double revated and 0.55 Kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.
S & F Aluminum powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mmx2.1mm, shutter top section 47.62mm x 44.45mmx1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 kg/RM) incl shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and as directed.
S&F aluminium powder coated glazed or skelton shutter including frame channel of section ( door frame single groove 85mmx45 mm x 1.25mm thick, shutter top section, bottom section, middle section and vertical section 65 mm x 45 mm x 1.25 mm thick and glazing clips weighing not less than 0.097 Kg/RM ) including shutter fixed to openable frame and channel as directed and as per IS specifications including S & F stainless steel wire cloth as required handles, tower bolt, door closer, locking arrangement Godrej, rubber gasket and door stopper complete.
S & F for Factory made UPVC (white/Off white colour sliding window three track made out of extruded profiles with wall thickness of members as 2.3mm (1-0.2mm). Window profile with hollow section with multi chamber frame (60mm x 62mm) sash bars (42mm x 67mm). Sliding inter lock (one vertical length in each shutter 45.5mm x 28mm). Glazing head (24.5mm x 16mm) members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, 1-0.2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fastners. Hardware : Touch lock to be of Zinc alloy (white powder coated), Steel roller system including 5mm thick glazing with selelcted quality glass, Aluminium track on bottom rail to be of hree track sliding frame, wool pine for sliding sash and interlock, complete all as specified and as directed. complete all as specifed and as directed. (Note:The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and with stainless steel wiremesh (0.36mm nominal dia of wire and average width of apreture 1.40mm. (Note: The unit rate quoted by contractor include cost of wiremesh and all other connected accessories. Net opening will be measured for payment purpose.)
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified.
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified.
S & F 2 mm thick fiber glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc and including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering, complete all as specified and as directed. complete all as specified
S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.
Dismantling mild steel work of any description not otherwise provided for.
Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified.
M & L Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick avg screed bed in CM 1:6 and including dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete.
M & L Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm tile not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick avg screed bed in CM 1:6 and including dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
M & L for coloured wall cladding tiles of size overall area exc 0.11 Sqm but not exc. 0.36 Sqm of 8-10mm thick on vertical surfaces of wall over 10mm thick rendering and as per sample approved by GE including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
M & L for 16-18 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab laid over and including 15mm thick screed bed in CM 1:4 including rounding to edge of granite as per required and including dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete.
M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete.
M & L for coloured Chequered cement concrete tiles 25cm x 25cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over 15mm thick screed bed in CM 1:6 including demolition of existing flooring or tiles of any type and size complete all as specified and as directed.
M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 60 mm thick, M-35 Grade with grey cement and pigment laid dry in floor/path over 50mm thick sand cushioning incl demolition of existing flooring or tiles of any type of any size complete.
M & L Preparation of Old wooden surface of any type and pattern duly complete removal of existing polishing and applying three coats of polish for a glossy finish over 10cm width or girth, complete all as specified and as directed.
S & F in repairs 150mm size brass butt hinges complete all as specified and as directed.
S & F in repairs 200 mm long brass barrel tower bolt, fixed complete all as specified and directed.
S&F in repairs 300 mm long brass sliding door bolts, plate type, stove enamelled black, with brigh bolt not less than 12 dia with and incluidng 1 minimum of 6 bolts and nuts four or bolt plate and tow on staple plate complete all as specified.
S & F in repairs 150 mm long brass handle oval type, complete all as specified and as directed.
S & F in repairs Mortice door lock matt finished brass with handle on both sides with 3 keys set with crust flip 8"cys plate complete all as specified and as directed. (Make : Godrej/Smart/Jindal/Stark).
Preparation of Old internal wall and ceiling surface by complete removal of existing treatment of walls by and applying a layer 2-3mm of Birla White/J K White wall care putty, again sand papering thus making surface smooth and applying two coats of Plastic emulsion paint (Velvet quality) over a coat of wall primer, complete all as specified and as directed.
S & F for Preparation of old plastered or unplastered surfaces of walls and ceiling applying wall paper on Wall/Ceiling of various pattern/design over a coat of wall primer and 1mm thick wall care putty JK or Birla complete all as specified and as directed.
Preparation of plastered or unplastered old decorated surfaces of walls and ceiling including brooming down or scraping down with steel wire brushes of smoke spots, moulds, moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying Texture Painting on Wall/Ceiling of various pattern/design over a coat of wall primer, complete all as specified and as directed.
M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat : SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer including taking down existing roof treatment of any type and also taking down cement plaster on brick/concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. Make: Asian Paints or equivalent in Sikka, Fosroc and STP Ltd. Note : The application shall be executed on any type of surface and on horizontal/Vertical areas.
M&L providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger/ Nerolac/STP Ltd. Notes: (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.
S&F in repair WPC sheet wall panelling of thickness 5mm (+ 0.25) consisting of panels of desired size stuck on inner frame work of 50mm wide stirup of 5mm (+ 0.25) thick prelam WPC sheet. The panel & strips shall be Density of 650 Kg/Cbm manufactured by an ISO 9001-2015 certified company. the strips should have in their center a grove of 6 mm width and 1 mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10 '' between two WPC strips. The WPC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200 mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5 mm (+ 0.25) thick WPC sheet of width 75 mm feathered at the edges shall be struck at the places where two panels are joined, using solvent cement including all fixing assecerories , moulding, corner beads.
S & F Vitreous china wash basin counter oval type size 600x425x195mm, fixed in repairs, under granite slab with all fitting and fixture, fixed in repairs, complete all as specified and as directed.
S & F in repairs Vitreous china floor mounted WC (Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, flushing cistern, with P or S trap with all fitting and fixture, (Make :- Jaquar Cat Part No.LYS-WHT-38851S300UFSMN/ Jaquar Cat Part No. LYS-WHT-38851S220UFSMN/ Kohler Cat Part No. K-17629IN-SM-0).
sunil traders
N.M. ASSOCIATES
Vipul Construction
SREE BABA TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .