Day to day shifting and installation of pumps at East Zone (Bahanpat, Bhatora, 522 coal face) sump as and when required basis in the Gevra Project for a period of 365 days.

Amount

Loading, unloading, transportation and stacking/ placement of 12” MS pipes as per the instructions of Engineer In charge. (For transportation of pipe, departmental vehicle will be provided)

Loading, unloading, transportation and stacking/ placement of 10” MS pipes as per the instructions of Engineer In charge. (For transportation of pipe, departmental vehicle will be provided)

Loading, unloading, transportation and stacking/ placement of 8” MS pipes as per the instructions of Engineer In charge. (For transportation of pipe, departmental vehicle will be provided)

Laying and jointing of 12” MS Pipeline including loading & unloading transportation and placement, welding and cutting of pipes & cutting and fitting of Packing. (if jointing by Nut-bolt). (Gas, Welding electrodes, and Welding Machine will be supplied by contractor) (For transportation of pipe, departmental vehicle will be provided). Note : Pipe may be old pipes or new pipes as per availability and instruction of site incharge.

Laying and jointing of 10” MS Pipeline including loading & unloading transportation and placement, welding and cutting of pipes & cutting and fitting of Packing. (if jointing by Nut-bolt). (Gas, Welding electrodes, and Welding Machine will be supplied by contractor) (For transportation of pipe, departmental vehicle will be provided). Note : Pipe may be old pipes or new pipes as per availability and instruction of site incharge.

Laying and jointing of 08” MS Pipeline including loading & unloading transportation and placement, welding and cutting of pipes & cutting and fitting of Packing. (if jointing by Nut-bolt). (Gas, Welding electrodes, and Welding Machine will be supplied by contractor) (For transportation of pipe, departmental vehicle will be provided) Note : Pipe may be old pipes or new pipes as per availability and instruction of site incharge.

Electrical Shifting of pump motor set - shifting of starter panels, cables, lighting panel including handling from store/ workshop to site, manually loading and unloading works, end preparation, fitting of lugs, cable connection at pole, starters, motor ends including earth clamp & cable glands etc. (Vehicle for loading, unloading, and shifting will be provided by the department.)

Mechanical Shifting of pump – motor set Installation of pump motor set on bed plates including foot valves, bends, short pieces, non-return valves, sluice valves, jetting hoses, suction & delivery pipe etc. (Gas, Welding Machine and welding electrodes will be supplied by contractor. Vehicle and Crane for loading, unloading & shifting will be provided by department.)

Pump motor set installation work - Dismantling and shifting of pump motor set on bed plates including foot valves, bends, short pieces, non-return valves, sluice valves, jetting hoses, suction & delivery pipe etc. (Gas, Welding Machine and welding electrodes will be supplied by contractor. Vehicle and Crane for loading, unloading & shifting will be provided by department.)

Dismantling of 12” MS pipeline including shifting from site to loading point, loading, unloading transportation and placement/placement as per instructions of Engineer I/c. (Gas will be supplied by contractor. For transportation of pipe, departmental vehicle will be provided)

Dismantling of 10” MS pipeline including shifting from site to loading point, loading, unloading transportation and placement/placement as per instructions of Engineer I/c. (Gas will be supplied by contractor. For transportation of pipe, departmental vehicle will be provided)

Dismantling of 8” MS pipeline including shifting from site to loading point, loading, unloading transportation and placement/placement as per instructions of Engineer I/c. (Gas will be supplied by contractor. For transportation of pipe, departmental vehicle will be provided)

Labour cost for fitting 200 mm dia Non – return value/ Foot Valve only (including cost of nut and bolt and welding, excluding cost of value and flange)

Labour cost for fitting 200 mm dia sluice value only (including cost of nut and bolt and welding, excluding cost of value and flange)

Labour cost for fitting 250 mm dia Non – return value/ Foot Valve only (including cost of nut and bolt and welding, excluding cost of value and flange)

Labour cost for fitting 250 mm dia sluice value only (including cost of nut and bolt and welding, excluding cost of value and flange)

Labour cost for fitting 300 mm dia Foot Value only (including cost of nut and bolt and welding, excluding cost of value and flange)

12” Flange welding works/ complete jointing work after necessary cutting with Gas and welding works. (Gas and welding machine and welding electrodes to be supplied by contractor).

10” Flange welding works/ complete jointing work after necessary cutting with Gas and welding works. (Gas and welding machine and welding electrodes to be supplied by contractor.)

08” Flange welding works/ complete jointing work after necessary cutting with Gas and welding works. (Gas and welding machine and welding electrodes to be supplied by contractor.)

Total impact of GST for the purpose of CTC

KEDAR SINGH (BID ID -1148006)

m/s bhagwan saran and associates (BID ID -1148767)