Repair and Renovation of Centralized facilities in the Department of Hindi in connection with NAAC Accreditation of Jammu University

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of 1.0mm thick (avg.) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with Ist quality acrylic distemper (ready mixed) having VOC contents less than 50 gms/ltr, Two or more coats of required shade and colour, including applying one coat of water thinable cement primer of approved brand and manufacture.

Distempering (one coat) with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work (Make Asian/Nerolac).

Renewing glass panes, with putty and nails wherever necessary including raking out old putty Float glass panes of thickness 5.0 mm (weight not less than 12.5 Kg/sqm. All work upto floor V level.

Repair to plaster of thickness 12mm to 20 mm in patches including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with cement mortar 1:4, including disposal of rubbish outside the University Campus. All work upto floor V level.

Providing and fixing ISI marked flush door shutters non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :30 mm thick including ISI marked anodised aluminium butt hinges with necessary screws including applying a coat of wood primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac).

Providing and fixing 25 mm thick shutters for cupboard etc, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws: Panelled or paneled and glazed shutters Second class teak wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked

-----------do------------ 5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm)

Supply of Labour for repair works. Carpenter II Class

-------------do-------------- Mazdoor

-----------do---------------- Blacksmith II Class

Higher Charges of welding Set including cost of Labour (welder with helper) and welding rods etc. complete.

M/S RAJ KUMAR CONTRACTOR

M/S DALJEET SINGH

Ranjit chopra

Sunny Kumar