PROVN OF 130 DESERT COOLERS ALONGWITH STAND AND SPL REPAIR TO DISTRIBUTION LINE OF SAL BAHADUR MD ACCN OF 11 GRRC AND EXT WATER SUPPLY WORK OF MD ACCN IN NEHRU ENCLAVE UNDER GE E/M LUCKNOW.

Amount

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes line ,foundation, manhole etc. and getting out including trimming the sides and forming bottom surfaces foundation, manholes etc to required levels in soft/loose soil , complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point , complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested, complete all as specified and directed by Engineer-in-Charge.

Fixing only steel tubing & connection with all fittings in old/new location laid in trenches / floor/wall including taking down of old unservicable pipe with all fittings, complete all as specified and directed by Engineer-in-Charge of 25mm bore : Notes: (i) Fittings & specials as required shall be provided by the contractor. Contractor's rate shall deemed to be included the cost of fittings provided. (ii) Excavation & earth work shall be measued paid seperately)

Fixing only steel tubing & connection with all fittings in old/new location laid in trenches / floor/wall including taking down of old unservicable pipe with all fittings, complete all as specified and directed by Engineer-in-Charge of 40mm bore : Notes: (i) Fittings & specials as required shall be provided by the contractor. Contractor's rate shall deemed to be included the cost of fittings provided. (ii) Excavation & earth work shall be measued paid seperately)

Fixing only steel tubing & connection with all fittings in old/new location laid in trenches / floor/wall including taking down of old unservicable pipe with all fittings, complete all as specified and directed by Engineer-in-Charge of 50mm bore : Notes: (i) Fittings & specials as required shall be provided by the contractor. Contractor's rate shall deemed to be included the cost of fittings provided. (ii) Excavation & earth work shall be measued paid seperately)

Supply ,laying,jointing , commissioning & testing of GI pipe medium grade with all fittings and fixtures laid in trenches or floor /fixed to wall / ceiling in and including taking down of old unservicable pipe with all fittings, complete all as specified and directed by Engineer-in-Charge of 25mm bore : Notes: (i) Fittings & specials as required shall be provided by the contractor. Contractor's rate shall deemed to be included the cost of fittings provided. (ii) Excavation & earth work shall be measued paid seperately)

Supply ,laying,jointing , commissioning & testing of GI pipe medium grade with all fittings and fixtures laid in trenches or floor /fixed to wall / ceiling in and including taking down of old unservicable pipe with all fittings, complete all as specified and directed by Engineer-in-Charge of 40mm bore : Notes: (i) Fittings & specials as required shall be provided by the contractor. Contractor's rate shall deemed to be included the cost of fittings provided. (ii) Excavation & earth work shall be measued paid seperately)

Supply ,laying,jointing , commissioning & testing of GI pipe medium grade with all fittings and fixtures laid in trenches or floor /fixed to wall / ceiling in and including taking down of old unservicable pipe with all fittings, complete all as specified and directed by Engineer-in-Charge of 50mm bore : Notes: (i) Fittings & specials as required shall be provided by the contractor. Contractor's rate shall deemed to be included the cost of fittings provided. (ii) Excavation & earth work shall be measued paid seperately)

Ductile iron specials 'ISI marked' for pressure water mains up to 150 mm bore spigot and socket Tee,pieces, single or double branch connection or collar etc.complete all as specified and directed by Engineer-in-Charge.Note - Excavation and earth work and joints shall be measured and paid for separately.

Ductile iron connecting pieces one end flanged and other socket or spigot or bell mouth or any size tapper upto 200 to 300 mm bore complete all as specified and directed by Engineer-in-Charge.Note - Excavation and earth work and joints shall be measured and paid for separately.

Cutting of existing Cast Iron pipes water main in position for insertion of new tee for branch connection by inserting CI fittings etc. including necessary excavation & earth work and dewatering of residual water,complete all as specified and directed by Engineer-in-Charge for 80mm bore :- Note : CI fittings and joints shall be measured and paid separately under appropriate items.

Cutting of existing Cast Iron pipes water main in position for insertion of new tee for branch connection by inserting CI fittings etc. including necessary excavation & earth work and dewatering of residual water,complete all as specified and directed by Engineer-in-Charge for 100mm bore :- Note : CI fittings and joints shall be measured and paid separately under appropriate items.

Cutting of existing Cast Iron pipes water main in position for insertion of new tee for branch connection by inserting CI fittings etc. including necessary excavation & earth work and dewatering of residual water,complete all as specified and directed by Engineer-in-Charge for 150mm bore :- Note : CI fittings and joints shall be measured and paid separately under appropriate items.

Drilling and tapping cast iron/ mild steel water mains (in position ) for branch connections including supply of GI nipple of medium grade pipe,150mm long of 15 mm bore ,complete all as specified and directed by Engineer-in-Charge.

Drilling and tapping cast iron/ mild steel water mains (in position ) for branch connections including supply of GI nipple of medium grade pipe,150mm long of 20 mm bore ,complete all as specified and directed by Engineer-in-Charge.

Supply ,laying,jointing and testing of sluice valve of size 100 mm bore 'ISI marked' both ends flanged and drilled cast iron body class PN-1.6 conforming to IS-14846/2000 complete with gun metal spindle including necessary nut bolts etc with all fittings,complete all as specified and directed by Engineer-in-Charge of following dia sizes : Note: For those sluice valves which are fixed with pillar of over head tank work involve such as breaking of RCC/lead flange joints will be deemed to be included in the quoted rates, contractor will also repair the demaged floor etc.to match with existing and Joints shall be measured & paid seperately.

Supply ,laying,jointing and testing of sluice valve of size 150 mm bore 'ISI marked' both ends flanged and drilled cast iron body class PN-1.6 conforming to IS-14846/2000 complete with gun metal spindle including necessary nut bolts etc with all fittings,complete all as specified and directed by Engineer-in-Charge of following dia sizes : Note: For those sluice valves which are fixed with pillar of over head tank work involve such as breaking of RCC/lead flange joints will be deemed to be included in the quoted rates, contractor will also repair the demaged floor etc.to match with existing and Joints shall be measured & paid seperately.

Construction of valves pit chamber of size 600x600x600mm (internal dimension), using PCC (1:4:8) 40 mm graded stone aggregate for foundation 15 cm thick, 23 cm thick wall in CM (1:4) 10 mm thick rendering all around the brick work with 1:6 cement mortar PCC (1:2:4) type B1 coping with 20 mm graded agregate for grouting MS frame including 4 mm thick MS top sheet cover with locking arrangement including 50 mm pad lock with double key arrangement, MS frame out of 40 x 40 x 5 mm thick angle iron including paintaing of steel surface with two coats of synthetic enamel paint over a coat of red oxide primers finishing coat including necessary excavation in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs ,complete all as specified and directed by Engineer-in-Charge.

All as per item No 19 above but internal dimension 1000 x 1000 x 1000 mm

All as per item No 19 above but internal dimension 1200 x 1200 x 1000 mm

Cutting of road (in hard/ dense soil ) for laying pipe line or repair to pipes / lead joints etc .of any size upto 01 mtr. depth and getting out incluiding forming bottom surface to required level and making good the road as per existing complete all as specified and directed by Engineer-in-Charge.

Drilling / boring (horizontally) upto 150 mm bore by penumatic tool or horizontal boring / drilling machine under the existing road (max. 10 mtr. In width) suitable for passing GI/CI/DI tubing complete all as specified and directed by Engineer-in-Charge.

M&L in repair run lead joints for spigot and socket ends for fittings / water mains in repair for new / old pipe lines and fittings of the 100 mm bore size complete all as specified and directed by Engineer-in-Charge.

M&L in repair run lead joints for spigot and socket ends for fittings / water mains in repair for new / old pipe lines and fittings of the 150 mm bore size complete all as specified and directed by Engineer-in-Charge.

M&L in repairs flanged joints complete with rubber or fibre board gasket for new / old pipe lines including nut bolts & washers etc. of the 100 mm bore sizes of water mains/fittings complete all as specified and directed by Engineer-in-Charge.

M&L in repairs flanged joints complete with rubber or fibre board gasket for new / old pipe lines including nut bolts & washers etc. of the 150 mm bore sizes of water mains/fittings complete all as specified and directed by Engineer-in-Charge.

Gun metal glove or gate valve, Class -1, ISI marked with iron wheel head, screwed both ends for iron pipe in and including taking up or down old unservicable gate valve , complete all as specified and directed by Engineer-in-Charge of 25 mm bore :Note : Excavation & earthwork shall be measured & paid separately under appropriate item of this BOQ.

Gun metal glove or gate valve, Class -1, ISI marked with iron wheel head, screwed both ends for iron pipe in and including taking up or down old unservicable gate valve , complete all as specified and directed by Engineer-in-Charge of 40 mm bore :Note : Excavation & earthwork shall be measured & paid separately under appropriate item of this BOQ.

Supply ,laying,jointing , commissioning & testing of ductile iron water mains S/S with flanged ends, centrifugally cast of class K-9, and wall thickness 6mm, complete all as specified and directed by Engineer-in-Charge of 100 mm bore :Notes- (i) Rubber gas kit joints and CI specials / fitting shall be measured and paid separately. (ii) Excavation & earthwork shall be measured & paid separately under appropriate item of this BOQ.

Supply, laying, jointing, commissioning & testing of ductile iron water mains S/S with flanged ends, centrifugally cast of class K-9, and wall thickness 6mm, complete all as specified and directed by Engineer-in-Charge of 150 mm bore :Notes- (i) Rubber gas kit joints and CI specials / fitting shall be measured and paid separately. (ii) Excavation & earthwork shall be measured & paid separately under appropriate item of this BOQ.

Taking up cast iron main with spigots & socket ends complete all as specified and directed for the 80 mm bore sizes complete all as specified and directed by Engineer-in-Charge. (Note - Excavation earth work shall measured and paid seperatly) :-

All as per item No 32 above but 100 mm bore.

Cleaning & relaying serviceable water mains CI / DI including removing of all type of scale or blockage for the 100 mm bore size (Joints, excavation returning filling and removal of soil shall be measured and paid separately)complete all as specified and directed by Engineer-in-Charge.

Point wiring for one socket outlet point 5 amps on independent board controlled by one, one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC concealed conduits and conduit accessories/fittings, pressed steel terminal switch boxes, 3 mm thick Bakelite sheet top cover (ISI Marked) fitted with Chromium plate brass screws washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dollyand making good disturbed surfaces of walls, floors, etc. to match with the existing specification of walls, floors etc. ,complete all as specified and as directed by Engineer-in- Charge.

Switch piano flush type , single pole , 5/6 Amps, one way polycarbonate type ,complete all as specified and directed by Engineer-in- Charge.

Socket out let 2 in 1 multipurpose 3 pin , (5 Amps ) flush type and 2 pin 5 Amp controlled by one switch polycarbonate type ,complete all as specified and directed by Engineer-in- Charge.

Supply, installation, testing and commissioning of evaporative desert coolers (steel body) factory made 22 gauge PGI sheet of size 100x70x60cm appx , front and side panels are made of same gauge with wood wool pads having nominal air flow capacity of 4000 cfm, or nearest size,having exhaust fan motor of capacity 1/5 HP with 18” steel blade size, and submersible pump of capacity 1/60 HP, and powder coated including necessary arrangement for connecting to new or existing source of water supply line with all fittings and fixtures complete all as specified and as directed by Engineer-in- Charge. Make-Champion or equivalent. Make of Exhaust Fan-Crompton Greaves, Havells, BAJAJ, KHAITAN, Make of submersible pump-BAJAJ, SYMPHONY, ORIENT, KHAITAN

Fabrication of mild steel stand made out of MS angle iron and flat grade Fe-290-Gde E-165 of size as directed suitable for positioning the desert cooler / stablisers including painting with two coat of (black) enameled paint over a coat of red oxide primer and installed at locations ,complete all as specified and as directed by Engineer-in- Charge.

Sanjai sales and services

M/S Nav Jyoti Enterprises