CA NO GE/AFJ-57/2022-23 PROVN OF CHAIN LINK FENCING WITH SURROUNDING AREA PATH (ACUPRESSURE TYPE) AT PCDA(NC) JAMMU UNDER GE (AF) JAMMU

Amount

M&L Surface dressing n.exc 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in post holes (or similar holes) n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance n. exc 50 and making good surface in soft/loose soil all as specified and as directed.

PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate)as in foundation filling and mass concrete all as specified and as directed.

M&L for angle iron posts and struts in fencing including cutting tops to shape (swan neck) or as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work including 40x6mm flat iron for holding chain link fencing conforming to Fe-290 Gde E-165 all as specified and as directed.

10mm dia mild steel screw bolts, with hexogonal or square at one end and srewd the other or screwd both ends each screwd end to be fitted with washer and one hexogonal or square length exc 15cm and n. exc 22.5cm all as specified and as directed.

Two coats of synthetic enamel paint to new steel surfaces over a coat of red oxide primer including preparation of surfaces not exc 10cm width or girth all as specified and as directed.

Fixing only galvanised chain link fencing of 100x100mm mesh & 4mm dia GI wire including line wire standards rails, straining bolts etc including provision of binding wire complete all as specified and as directed.

Supply only MS galvanised chain link fencing of size as specified under item as complete all as specified and as directed.

M&L for galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails including securing or lying at crossing with and provn of MS galvanised pins etc as directed(each line to be measured) all as specified and as directed .

M&l brick work with subclass 'B 'bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed.

M&L rendering 15 mm thick on fair faces of brick wall in CM 1:6 finished fair and even complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6, finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:4 and mixed with WPC , finished even and smooth (without using extra lime or cement) complete all as specified and directed. (Note:- WPC shall be measured & paid separately).

Supply only water proofing compound complete all as specified and directed.

M&L for preparing new plastered surfaces and applying two coats of cement based paint over a coat of primer all as specified and directed.

Preparation of new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M & L, for cement concrete in DPC, type B-0 1:2:4 (using 12.50 mm graded stone crushed aggregate) complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft loose soil all as specified and directed

Removing excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for 60 mm thickness rubber moulded machine pressed precast concrete interlocking paver block M-35 any shape and size, confirming to IS 15658-2006 in coloured glossy finish rubber mould casted laid dry over sand cushioning complete all as specified and directed.

S&F factory made kerb stone of M-25 grade cement concrete in postion to the required line, level and curvature ,jointed with cement mortar 1:3 (1 cement:3 sand) incl making joints with or without grooves thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete all as specified and directed.

M&L for chequered cement concrete tiles 200mm x 200mmx 25mm thick ( accupressure type base med and High), set jointed and pointed in cement slurry in floors with grey cement and pigments complete all as directed including 15mm thick screed bed in CM 1:4 complete all as specified and directed.Make:-ISI Marked or equivalent

M&L, PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in Coping/bed block complete all as specified & directed.

Supply & fixed precast reinforced Benches (Chair type bench with back rest) all as per shown on drawing No SK/P/2017 dated 26/07/2017. The bench shall consist of 02 Nos L shape base support in approved colour of thickness 100mm, back width 620mm and providing 5 Nos reinforced concrete plank in approved colour of size 1500x100x50mm (02 Nos plank on back and 03 Nos plank on seat). All the reinforced concrete shall be manufactured by using M-25 grade of concrete & reinforced suitable to prevent to damage during handling, transportation and errection. All parts are jointed together with nuts and bolts of 10mm dia size. All bolts are sealed after assembly. Seating height of bench 450mm total height of bench 1070mm, bench top and plank are treated with special anti corrosive, water proof coating so as to make surface glossy and water proof complete all as specified and as directed by Engr-in-Charge.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

M/S MOHAN LAL SHARMA

DES RAJ NAGPAL CONTRACTORS PVT.LTD

M/s Sunny Gupta