Works Contract for Veppadai

Extension works

Excavation of pole pit upto 27" (8.0 m) Pole by using JCB

Excavation of pole pit for 30' RCC Pole/9.00m PSC Pole by using JCB or manual

Excavation of RSJ pole pit above 36' by using JCB or manual

Stay pit 4.5' to 5' depth by using JCB or manual

Erection of PSC/RCC poles upto 8.0m. (27') by using Crane or manual

Erection of PSC/RCC poles upto 9.14m.(30') by using Crane or maual

Erection of RSJ poles above 36'-0' by using Crane or maual

Erection of stay set complete

Fixing of HT "V" cross arms(all types) / channel cross arms/ guarding Cross arms

Fixing of LT 3 phase cross arms

Fixing of LT Single phase cross arms

Fixing of HT/LT TI Fittings

Fixing of HT pin Insulators 22 KV

Fixing of HT 22 KV strain disc.

Fixing of LT pin Insulator

Fixing of LT shackle

Fixing of Aluminium Knob

Paving and Stringing of 7/4.09 mm ACSR

Paving and Stringing of 7/3.35 mm ACSR 7/3.0 mm AAAC

Paving and stringing of 7/2.59 mm/ ACSR 7/2.11 mm ACSR

ERECTION of Double Pole TRANSFORMER STRUCTURE COMPLETE inclusive of following works - Excavation of pole pits sizing 2' X 2' X 6', erection of poles, erection of base plate, erection of structure materials , erection of AB switch and HG Fuse, Structure Earthing complete , Pole concreting (2'x2'6') for both base and sleeve including supply of jelly, sand and cement by the contractor , plinth erection with plastering ratio 1:2 including supply of cement and sand , Fixing of Open Type fuse units, HT/LT LAS fixing and LAS earthing through PVC Pipe 0.5" , Provision of bus-bar arrangement, Erection of Stay Set complete, Jumpering, erection of support angles and insulators if any , Alteration of materials in lathe works if any, provision of danger board, 3 Nos Earth pits including erection of cement collar , painting of metal parts, including loading, unloading, transportation of all required materials from stores to site , Road site to pit spot as per the directions by the TANGEDCO Site Engineer (This includes labour for loading, unloading, transporting and rent for crane lorry, all T&P suchas crowbars, siling, DShackle etc., that must be brought

ERECTION of HVDS COMPLETE inclusive of following works - Excavation of pole pits sizing 2' X 2' X 6', erection of poles, erection of base plate, erection of structure materials , erection of AB switch and HG Fuse, Structure Earthing complete , Pole concreting (2' x 2' x 6') for both base and sleeve including supply of jelly, sand and cement by the contractor in the ratio of concreting 1:3:6 , plinth erection with plastering ratio 1:2 including supply of cement and sand , Fixing of Open Type fuse units, HT/LT LAS fixing and LAS earthing through PVC Pipe 0.5" , Provision of bus-bar arrangement, Erection of Stay Set complete, Jumpering, erection of support angles and insulators if any , Alteration of materials in lathe works if any, provision of danger board, 3 Nos Earth pits including erection of cement collar , painting of metal parts, including loading, unloading, transportation of all required materials from stores to site , Road site to pit spot as per the directions by the TANGEDCO Site Engineer (This includes labour for loading, unloading, transporting and rent for crane lorry, all T&P suchas crowbars, siling, DShackle etc., that must be brought

Erection of New Transformer all capacities (with jumpering)

Loading and Unloading of Transformer up to 100 KVA

Loading and Unloading of Transformer 100 KVA and up to 200KVA

Loading of Poles (Up to 8.0 mtr)

Loading of Poles (Up to 9.0 mtr)

UnLoading of Poles (Up to 8.0 mtr)

UnLoading of Poles (Up to 9.0 mtr)

Transport of Materials. Below 8 Kms.

Above 8 Kms. For additional Km.

Transportation of Poles from road side to pole Pit up to1.0 KM 7.5/8.0m (RCC &PSC Poles)

Transportation of Poles from road side to pole Pit up to1.0 KM 9.14m & 9.00 Mtr (RCC&PSC Poles)

Drilling of hole in channel only 3/4" & 1" per hole

Cutting of flat

Cutting of channel

Cutting of Angle

Dismantling of RCC pole 9.14mtr/RSJ pole

Dismantling of RCC/PSG pole 8.0mtr/7.5mtr

Dismantling of 'V' X arm,channel X arm,guarding X arm (all types)

Dismantling of LT 3 phase X arm

Dismantling of LT single phase X arm

Dismantling of HT/LT TI fitting

Dismantling of 11KV strain disc

Dismantling of 22KV pin insulator

Dismantling of LT shackle

Dismantling of LT pin insulator

Dismantling of Aluminium knob

Erection of street light service

Releasing of Single phase service & Refixing

Releasing of Three phase service & Refixing

Dismantling of stay set

Dismantling of ACSR 7/3.35mm conductor

Dismantling of ACSR 7/2.59mm/ 7/2.11mm conductor