Loading…
Loading…
Tender Value
₹7.5 Cr
EMD Value
₹14.9 L
Closing Date
16 Sept 2026, 11:00 am
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
GEN
15 conditions · 4 needing a document upload
Financial Eligibility Criteria: In case tender value Rs. 50 lakhs or more, The tenderer must have minimum average annual contractual turnover of V/N or 'V" whichever is less; where V= Advertised value of the tender in crores of Rupees= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VI B, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet tenderer first read the Para 10 of GCC carefully and Advance Correction GCC2022.
1.For participating in tenders for an electrical nature of work, the contractor shall have to possess valid electrical license of appropriate voltage issued by any State Government under Clause 45 of Compilation of Rule of Indian Electricity Rules 1956 or as amended from time to time. Electrical works of 11 KV and above including OHE, 'A' class Electrical Contractor license is essential. 2.The license can be possessed with one of the partners or in his own name, if sole proprietor. Firm should submit a self-attested copy of the Electrical Contractor License along with the offer; otherwise the offer will be summarily rejected.
Eligibility Criteria means any contract which have satisfactorily executed & completed by the tenderer, which are mentioned as below as similar nature of works. As regards the similar works, the tenderer should have satisfactorily executed Work of 1.Electrification of Service building. 2.Electrification of Staff quarters. 3.Electrification of offices. 4.Electrification of road and colony lighting 5.Electrification of circulating area lighting 6.Erection and commissioning of LT, HT up to 33 KV overhead lines. 7.Substation installation and commissioning. 8.Electrification of washing pit, sheds & workshops etc. 9.Comprehensive/semi comprehensive maintenance of service building or staff quarters or sub stations or DG set or lifts. 10.Annual electrical maintenance contract of train lighting and/or air conditioning coaches excluding RMPU units of AC coaches. 11.Any above work or combination of (1) to (10) above. Tenderers should submit documentary proof in regards to fulfilling these eligibility criteria along with their offer. In case of any ambiguity, the decision of Chief Electrical Engineer in regards to classification of work will be final.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or(ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or(iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.(b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or(ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or(iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.(b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. IN case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Tenderer first read the Para 10 of GCC carefully and Advance Correction GCC2022.
19 conditions · 1 needing a document upload
Tenderers are requested to submit their offers as per GST Tax regime. All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per latest GST Law. Contractor has to submit GSTN registration and PAN card.
Conditions regarding inclusion of "Letter of credit" as mode of payment attached as Annexure LC". As per Railway Board Letter No. 2018/CE-I/CT/9 dt. 04.06.2018, special condition of LC has been applied. The contractor shall have the option to take payment from Railway through a letter of credit (LC) arrangement, for all the tender having advertise cost of Rs. 10 Lakh or above.
The above option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter during execution of contract.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Latest GCC has been introduced and published / available on railway's website. The provisions of GCC will be applicable on all tenders published here after. Tenderers are requested to download the same from the railways website and ensure the implementation of the latest provisions made in GCC, while execution of work.
Contractor is to abide by the provisions of Payment of Wages act & Minimum Wages act in terms of clause 54 and 55 of Indian Railways General Condition of Contract ( copy uploaded and attached with this tender). In order to ensure the same, an application has been developed and hosted on website 'www.shramikkalyan.indianrailways.gov.in'. Contractor shall register his firm/company etc. And upload requisite details of labour and their payment in this portal. These details shall be available in public domain. The Registration/ updation of Portal shall be done as par clause 55 C (i) of Indian Railways General Condition of Contract.
While processing payment of any 'On Account Bill' or 'Final Bill' or release of 'Advances' or 'Performance Guarantee / Security deposit', contractor shall submit a certificate to the Engineer or Engineer's representatives that "I have uploaded the correct details of contract labours engaged in connection with this contract and payments made to them during the wage period in Railway's Shramikkalyan portal at 'www.shramikkalyan.indianrailways.gov.in' till ____ Month, _____Year."
Part(A):Bhopal Division: Provision of different electrical works for upgradation of station passenger amenities at stations under the section of SSE/PY/ET.Part(B):Bhopal Division: Provision of different electrical works for upgradation of station passenger amenities at stations under SSE/M/GUNA.Part(C):Bhopal Division: Provision of different electrical works for upgradation of station passenger amenities at stations under SSE/M/BINA & SSE/M/BPL.
ELECT-GEN-BPL-T-28-2026~WCR
ELECT-GEN-BPL-T-28-2026
Open
Works - General
6 Months
Bhopal, Madhya Pradesh
₹0
₹14.9 L
25 Aug 2026
25 Aug 2026
2 Sept 2026
311 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,89,96,128.81 | ||
| — | Item Breakup for | details. | — | ||
| Supply, installation, connection, testing and commissioning of 40 watts LED IP65 weather proof fitting with polycarbonate housing and diffuser 4 feet long (approx) suitable for surface mounting as well as suspended mounting under COP complete with proper clamp fitting separate light/fan points, junction box and ceiling rose on truss as per railway specifications attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent. | — | — | — | 6,95,928.48 | |
| — | 88.00 | — | — | ||
| Provision of Led Linear Profile Light Suspended type, 36-38W, CCT-6500K-4000K, IPRating-IP20, Operating Temperature: 30°C +46°C. The beam angle of the fitting shall be wide Beam Angle 120° Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 140 to 270 V AC, 50 Hz, power factor >0.95. CRI>80, THD<10% Length of Fixture 1200 mm±5%, Fixture Life time should be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS and LM 80 Report required as per railway specifications attached. Size of Product-1200mmx50mmx70mm. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent. | — | — | — | 4,61,438.56 | |
| — | 94.00 | — | — | ||
| Provision of LED Down Lighter Recess Mounted 30w Decorative type Luminaries, Narrow Beam Angle 45-52°, Powder Coated, Aluminium Housing and Pressure Die Cast Housing Heat Sink, Anti-Glare Light, Diffused Light, System Lumen Efficacy>100L/W,CCT-6500K-4000K,PF>0.95, Driver Efficacy>85%, Surge Protection 2.5KV,THD<10%, IP20,440V AC Withstand Capacity, Protection Against the Over Voltage, Under Voltage and Short Ckt as per railway specifications attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent. | — | — | — | 1,21,845.62 | |
| — | 95.00 | — | — | ||
| Supply, installation, testing &commissioning of Surface Mount Round Led Downlighter consuming a system wattage of 18W (±10%) & the luminaire shall be with system efficacy 100 lm / W. Housing: Die Cast Aluminium. IP20 ,Optics: PMMA/Polysterene Diffuser. The operating CCT shall be 5700K with CRI of80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD 10% & PF 0.9, 50,000 Hrs LED Life with L70Criteria. The LED Driver shall be easily available in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of2KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard. The fixture similar to Wipro Cat No.:CRDL11S023HP57 or equivalent as per railway specifications attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent. | — | — | — | 98,367.75 | |
| — | 110.00 | — | — | ||
| Supply erection, fixing, connecting, testing & commissioning of surface mounted, maintenance free, 6 watt round LED downlight with die cast aluminum housing and back lit design hight approx35 to 40mm or standard, colour temp 5000 k to 6500 K required as per railway specifications attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent. | — | — | — | 62,433.8 | |
| — | Item Breakup for | details. | — | ||
| Supply erection, fixing, connecting, testing & commissioning of modular LED 3 watt step/ foot light in modular box complete as per railway specifications attached. Make- PHILIPS, Osram, Jaquar, WIPRO or equivalent. | — | — | — | 59,885.28 | |
| — | Item Breakup for | details. | — | ||
| Supply erection, fixing, connecting, testing & commissioning of indoor/ outdoor LED strip light minimum 5 watt/ meter with driver Indoor/ out door required as per railway specifications attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent. | — | — | — | 2,58,054 | |
| — | Item Breakup for | details. | — | ||
| Supply erection, fixing, connecting, testing & commissioning of decorative wall mounted , down side 1 light LED 6 watt wall lamp Chrome finish equivalent to item no. DCL-CHR- WL5048 XGW of Jaquar make , colour temp required as per railway specifications attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent. | — | — | — | 1,96,646.8 | |
| — | Item Breakup for | details. | — | ||
| Suppy erection, fixing,connecting, testing & commissioning of wall mounted, decorative LED light fitting 7watt 1 light opel Glass with Chrome finish (SS) equivlant to item no. DWL-CHR-MB14048T1E27 of Jaquar make , colour temp required as per railway specifications attached. MAKE:- Jaquar, Philips, Wipro, Osram or equivalent. | — | — | — | 1,59,741.31 | |
| — | Item Breakup for | details. | — | ||
| Suppy, erection, fixing, connecting, testing & commissioning of wall mounted, decorative LED light fitting 3 watt 1 light wall lamp Chrome finish (SS) equivlant to item no. DWL- CHR-LBED01R003XW of Jaquar make, colour temp required as per railway specifications attached. MAKE:- Jaquar, Philips, Wipro, Osram or equivalent. | — | — | — | 1,33,612.57 | |
| — | Item Breakup for | details. | — | ||
| Supply and installation of Garden light (Bollard) with foundation 6 inch above ground level, size 275mm to 300mm dia 60mm body colour black material aluminum having Chip as per LM 80/IS16106 (LED PT Module 0.5 to 1 Watt) or holder B-22 with LED Lamp 12 Watt as per railway specifications attached. Fitting Make: Phillips, Jaquar, Wipro, Havells, Osram or equivalent and Lamp Make: Phillips, Jaquar, Wipro, Havells, Osram or equivalent. | — | — | — | 1,49,832 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, connecting, testing and commissioning of indoor type 36W ultra slim LED Panel light fitting complete with aluminum/CRCA housing frame (2ft.x2ft.),fixtures, clamps, etc. asper Railway's technical specifications attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent. | — | — | — | 92,972.88 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, connecting, testing and commissioning of 20 Watts Outdoor INVERTER LED Batten tube complete with other accessories such as clamps, bracket, square block etc. as per technical specifications attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent. | — | — | — | 73,035.63 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, connecting, testing and commissioning of outdoor type 70 W LED street light with high pressure die cast aluminium housing with PC IP66 rating complete with suitable MS clamps, nut-bolts, anchor fasteners etc as per railway specification attached. Make - PHILIPS, Jaquar, WIPRO, Osram or equivalent. | — | — | — | 1,41,062.4 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, connecting, testing and commissioning of outdoor type 70 W LED flood light with high pressure die cast aluminum housing with PC IP66 rating complete with suitable MS clamps, nut-bolts, anchor fasteners etc as per railway specification attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent. | — | — | — | 1,97,768.34 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, connection, testing and commissioning of 160W LED flood light fitting IP66rating,The Luminaires casing/housing shall be Spun Aluminum/Die Cast Aluminum with higher thermal conductivity with toughened glass, complete in all respect. It also includes supply of suitable fixing arrangements for fixing the LED fitting as per railway specification attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent. | — | — | — | 3,96,528 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, fixing, connecting, testing & commissioning of 200 watts LED fitting complete in all respect and fixing by means of PVC conduit pipe and ceiling rose as per Railways specification attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent. | — | — | — | 2,59,529.52 | |
| — | 38.00 | — | — | ||
| Supply, fixing, connecting, testing and commissioning of propeller type AC ventilating exhaust fan metal body, 300 mm sweep 4 pole heavy duty, air delievery - 17 +/- 10% m3/h, 1350 RPM +/- 10%, 90 watts maximum, capacitor type, PF-0.9 minimum, Gray colour, totally enclosed type fan motor, E class insulation material with round shape 3 nos. louver shutter complete with frame, leg set and hardware, ISI marked as per IS:2312-1967 (latest) by making a hole on wall and then replastering & distempering the wall surface as per railway specifications attached. Make- BAJAJ, ORIENT, USHA or equivalent | — | — | — | 83,600 | |
| — | 52.00 | — | — | ||
| Supply, installation, testing, commissioning of 450mm sweep all Metal body construction industrial type heavy duty exhaust fan, propeller type, single phase, 1400RPM complete with all standard accessories as-per railway specification attached with minimum warranty of one year or more as per the manufacturer as per approved list Make-BAJAJ, ORIENT, USHA or equivalent. | — | — | — | 3,95,200 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, testing & commissioning of Energy efficient BLDC Wall mounting Fan of 400 mm sweep wall mounting type suitable for single phase, 230V and fixtures, clamps, nuts and bolts etc. including civil works of fixing the fan and finishing the same as per technical specification attached. Make- BAJAJ, ORIENT, USHA or equivalent. | — | — | — | 3,15,414 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, connecting, testing and commissioning of 2x18W fly catcher suitable for operation on 230 volts AC approx. size 24.5"x8"x17", size 3 mm thick MS flat clamps, nut bolts etc. on Railway platform under covered shed structure and connecting by means of PVC insulated flexible copper conductor to be drawn in 1/2" dia. flexible PVC conduit which shall be suitably supported from overhead conductors as-per railway requirement. | — | — | — | 2,23,675.4 | |
| — | 2126.00 | — | — | ||
| Supply and fixing of perforated cable trays of GI sheet of 300 mm width & 75mm height along with suitable cover. The work includes the supply of perforated cable tray of GI having dimensions300X1.6X75 mm along with GI sheet cover to fix on the cable tray of reputed make. The thickness of the cable tray should be of 1.6mm and1.2mm for cable tray cover. The cable tray should be fixed upon the wall/pillar/gantries etc. and similar other places with proper clamps, fixtures etc. complete in all aspect as per the direction of Railway site Engineer. the cable tray cover should be fixed with proper clamps, fixtures, nuts& bolts etc as per site requirement. | — | — | — | 21,89,482.36 | |
| — | Item Breakup for | details. | — | ||
| Supply of material and erection of Octagonal galvanized steel pole of 5 mtr height on cement concrete foundation complete with foundation bolts, single arm etc. with GI spiral earthing as per specification attached. Make - BAJAJ,PHILIPS, CROMPTON or equivalent. | — | — | — | 2,06,486.4 | |
| — | Item Breakup for | details. | — | ||
| Supply of material and erection of Octagonal galvanized steel pole of 5 mtr height on cement concrete foundation complete with foundation bolts, Double arm etc. with GI spiral earthing as per specification attached. Make - BAJAJ,PHILIPS, CROMPTON or equivalent. | — | — | — | 4,13,238 | |
| — | Item Breakup for | details. | — | ||
| Laying, erection, connection and testing of PVC Aluminium armoured cable in the following manner and as per railways scope of work. (Cable will be supplied by Railway at concerned depot.) | — | — | — | 12,74,169.4 | |
| — | 595.00 | — | — | ||
| Cable laying by horizontal boring below track etc by pushing method-Drilling for horizontal bore below track by pushing method by suitable means for laying of GI pipes/ pipe etc of various sizes, the bore shall be of 200 mm dia & shall be done at a depth of1200 mm from ground level, it also includes ins erection of pipe. | — | — | — | 16,31,674.45 | |
| — | 825.00 | — | — | ||
| Supply and fixing of heavy duty HDPE Pipe 160 MM for provision of Cables in pipe asper technical specification attached. (Note:- Before starting the work, the sample should be got approved by the Railways.) | — | — | — | 6,95,895.75 | |
| — | Item Breakup for | details. | — | ||
| Supply of material and digging of trench in concrete area 30cms deep and 30cms wide and laying of pipe or cable. The Contractor has to replaster the surface/floor with cement concrete etc. (All the material will be supplied by the contractor) as per specification attached. | — | — | — | 2,40,806 | |
| — | Item Breakup for | details. | — | ||
| Supply, laying & fixing of DWC/HDPE pipe of 110/120mm dia along with all required material for joining the pipes, as per specification attached. (Note:- Before starting the work, thesample should be got approved by the Railways.) | — | — | — | 4,32,343.5 | |
| — | Item Breakup for | details. | — | ||
| Cable route marker; Supply & providing cable route markers marked with L.T./H.T. cable as required as per relevant IS & at every turning points/road crossings and at 20 mtrs distance. Supply portion under this item shall mean that the cost of the cable route markers marked with L.T/H.T. as required as per drg or relevant IS and erection involves supply of cement concrete to make foundation /grouting etc. as directed by RLY site Engineer. The cable route marker should be fixed at every 20 meters and at every turning point or otherwise as instructed by Rly's Site Engineer. | — | — | — | 9,089.6 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, connecting, testing and commissioning GI pipe earthing arrangement complete as-per specification attached with earth pit and connection strip. (GI PIPE Make: Tata, Jindal, Surya or equivalent) | — | — | — | 4,34,904 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, connection, testing and commissioning of 8 SWG GI wire as per technical specification attached | — | — | — | 23,235.75 | |
| — | Item Breakup for | details. | — | ||
| Dismantling of Overhead line / pole. This work involves identified poles to be dismantled by cutting and stacking of these poles as directed by Rly. Site Engineer. All the dismantled /released material shall be handed over to concerned Rly Engineer at their respective depot, the loading, transportation and unloading shall also be done by the contractor. It includes the dismantling of ACSR conductor/GI wire of LT/HT over head power line erected on the poles. The conductors / GI wires, cross arm etc. should be brought down and its manual winding and stacking of cross arm should be done. It also includes the dismantling of all terminations, jumpering etc., wherever required. The dismantled conductor should be loaded, transported & handed over to the concerned Railway SSE depot with proper accountal of the released material. | — | — | — | 42,187.5 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, fixing, connecting, testing & commissioning of Cable trunking system 50mm*50mm complete as per railway requirement. Make- POLYCAB, FINOLEX, SHREENATH, PRESS FIT or equivalent. | — | — | — | 2,46,159 | |
| — | 1150.00 | — | — | ||
| Supply, erection, connection, testing and commissioning of light points with casing caping wiring with modular switch socket board(included), PVC pipe complete with all necessary accessories as per wiring specification attached. The wiring shall be carried out with copper conductor of 1100Vgrade size 1.5 sq.mm - 4 sq.mm & 2.5 mm green colour earth wire for the following point - Make: For wire - HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. For pipe - POLYCAB, FINOLEX, SHREENATH, PRESS FIT or equivalent. For switches - HAVELLES, L&T, Anchor, C&S, LEGRAND or equivalent:- FL tube/LED Tube/ODFT/lamp Point/Ceiling fan/ Exhaust fan Point. | — | — | — | 4,95,730.5 | |
| — | 85.00 | — | — | ||
| Supply, erection, connection, testing and commissioning of light points with casing caping wiring with modular switch socket board(included), PVC pipe complete with all necessary accessories as per wiring specification attached. The wiring shall be carried out with copper conductor of 1100Vgrade size 1.5 sq.mm - 4 sq.mm & 2.5 mm green colour earth wire for the following point - Make: For wire - HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. For pipe - POLYCAB, FINOLEX, SHREENATH, PRESS FIT or equivalent. For switches - HAVELLES, L&T, Anchor, C&S, LEGRAND or equivalent:- 4x5A, 5 pin socket point on separate circuit & board for mobile charging. | — | — | — | 38,697.95 | |
| — | 100.00 | — | — | ||
| Supply, fixing, connection, testing & commissioning of AC power point by separate wiring with 4 sq.mm copper wire and MS pipe, 20Ametal clad and 16A SP MCB complete in all respect as per railway technical specification attached. Make: For wire-HAVELLES, KEI,FINOLEX,POLYCAB or equivalent. For switch socket with MCB - L&T,SIEMENS,HAGER,LEGRAND,SCHNEIDER or equivalent. | — | — | — | 1,63,521 | |
| — | Item Breakup for | details. | — | ||
| Supply & fixing of Junction box of polycarbonate with IP-66/67 protection halogen free and weather proof having minimum dimensions 205X255X112 mm, fire retardant, antacid &anticorrosive suitable for multiple connection of 4X16/25 sq.mm. cable as mentioned below- The work includes the supply &erection of thermoplastic polycarbonate junction box having specified minimum dimensions with multi level knockouts for cable glands. The junction box shall have IP66degree of protection, polyurethane gasket and weather proof, UV resistant, temperature resistance, fire retardant and anticorrosive suitable for multiple connection of 4X16/25 sq.mm cable. The junction box is to be fixed at the location identified by the Railway Engineer with suitable clamps, fixtures, nut& bolts etc, so as tofirmly fixed on the wall/RCC pillar. Make -Hansel, Sintex or similar. | — | — | — | 1,00,039.2 | |
| — | Item Breakup for | details. | — | ||
| Description: Supply, installation, connecting, testing and commissioning of digital timer switch 16A capacity, complete with associated accessories & enclosure. Make- HAGER, L&T,SIEMENS, LEGRAND or equivalent. | — | — | — | 1,01,570.8 | |
| — | Item Breakup for | details. | — | ||
| Description: Supply, installation , testing and commissioning of 3 pole power contactor type of suitable capacity as per timer above. Make- L&T, SIEMENS, LEGRAND or equivalent. Make- HAGER, L&T,SIEMENS, LEGRAND or equivalent. | — | — | — | 1,50,710 | |
| — | Item Breakup for | details. | — | ||
| Supply , fixing, testing & commissioning of 12 ways double door single phase SDB comprising 1x32 ATPN C series MCB as incoming and 8x16 A SP C series MCBs as outgoing, as per technical specifications attached. Make:- L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 1,29,951.9 | |
| — | Item Breakup for | details. | — | ||
| Supply, Installation, Connecting , Testing and commissioning of Three Phase, Double Door, 12- Way, Vertical Distribution Board in Powder coated MS encloser complete with detachable gland plates , bus bar, earth bar, neutral link 1x63 A FP MCCB as incoming and 12x32 A TP MCBs as outgoing. Make:- L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 2,20,291.2 | |
| — | 7.00 | — | — | ||
| Provision of 36 kV capacity Hand Gloves as per railway specification | — | — | — | 9,450 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, installation, connection, testing and commissioning of Concealed type point wiring with copper wire,PVC conduit pipe and flush metal box with plate inner and outer, modular switch, sockets, regulator, board plate, wire,pipe, etc. complete, wiring in PVC pipe 25 mm dia (medium) 1.6 mm to 1.8 mm thickness approx. with 1.5sq mm to4.0 sqmm PVC insulated single core multistrand copper cable confirming to IS:694- 1990 or latest with one holder/ceiling rose on junction box with round plate with 2.5 sq mm PVC insulated copper wire green color for earthing alongwith connection etc. as per wiring specification attached. Make: For wire - HAVELLES, KEI, FINOLEX, POLYCAB orequivalent. For pipe - POLYCAB, FINOLEX, SHREENATH, PRESS FIT or equivalent. For switches - HAVELLES, L&T, Anchor, C&S, PRESS FIT or equivalent. | — | — | — | 3,10,511.87 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, testing & commissioning of 2.5 sq.mm single core multistrand copper conductor for main/submain wiring conforming to IS:694-1990 or latest. Make- HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. | — | — | — | 71,021 | |
| — | 1375.00 | — | — | ||
| Supply, fixing, testing & commissioning of 4.0 sq.mm single core multistrand copper conductor for main/submain wiring conforming to IS:694-1990 or latest. Make- HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. | — | — | — | 76,931.25 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, testing & commissioning of 6.0 sq.mm single core multistrand copper conductor for main/submain wiring conforming to IS:694-1990 or latest. Make- HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. | — | — | — | 76,832 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, testing & commissioning of 10.0 sq.mm single core multistrand copper conductor for main/submain wiring conforming to IS:694-1990 or latest. Make- HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. | — | — | — | 3,26,040 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 32 mm PVC conduit pipe casing & capping for submain/main wiring purpose with all accessories as per Railway's technical specifications attached. Make: POLYCAB, FINOLEX, SHREENATH,PRESS FIT or equivalent. | — | — | — | 30,274.2 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 50 mm PVC conduit pipe casing & capping for submain/main wiring purpose with all accessories as per Railway's technical specifications attached. Make: POLYCAB, FINOLEX, SHREENATH,PRESS FIT or equivalent. | — | — | — | 58,060.2 | |
| — | Item Breakup for | details. | — | ||
| — | Item Breakup for | details. | — | ||
| — | 2.00 | — | — | ||
| — | 8.00 | — | — | ||
| — | — | — | 8,63,147.64 | ||
| — | 16.00 | — | — | ||
| — | — | — | 5,04,000 | ||
| — | 1155.00 | — | — | ||
| — | — | — | 21,59,850 | ||
| — | 18.00 | — | — | ||
| — | — | — | 1,62,000 | ||
| — | 150.00 | — | — | ||
| RCC foundation with cement concrete of 1:2:4 ratios, asper site requirement (RCC for panel, Transformer, Pole muffing & otherb work). | — | — | — | 9,56,040 | |
| — | 10.00 | — | — | ||
| Provision of Online UPS of Rating 2.0 KVA With Battery Of Backup Time 120 Minutes complete is all aspect. Make:- For UPS - Microtek, Luminous, Vertiv or equivalent, Battery- Microtek, Luminous, EXIDE or equivalent. | — | — | — | 7,15,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SpecialConditions_1.pdf
ATTACHMENT
TechnicalSpecifications_1.pdf
ATTACHMENT
GCC 2022
ATTACHMENT
GCCAmendments1to10.pdf
ATTACHMENT
GCCamendmentcorrectionslip11.pdf
ATTACHMENT
AnnexureVIB.pdf
ATTACHMENT
AnnexureLC.pdf
ATTACHMENT
WCRLEDSpecificationsforLEDlights.pdf WCR LED Specification
ATTACHMENT
RB200824GOI190724.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
WCRLEDSpecificationsforLEDlights.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].