Balance Work for Construction of three Roomed Double storey additional Accommodation at BMS Villgam by way of Electrification, Granite work and fixing of Railing.

Earth work in excavation in all kinds of soil by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed upto all leads in all kinds of soil complete job

Providing & Laying of stone soling (duly hand packed) including watering dressing and ramming to achieve desired compaction incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Providing & laying in position cement concrete of specified grade including curing but excld. the cost of centring and shuttering all work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Providing & laying in position cement concrete of specified grade including curing but excld. the cost of centring and shuttering all work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Centring and shuttering of kit ply including propping, strutting & removal of the same in Foundations, footings, bases of columns etc. for mass concrete complete job

Lighting Points :- One Lighting point shall incl. Wiring for lighting points in 1.5Sq mm PVC insulated Copper wire & 2.5Sq mm PVC insulated multi-strand Copper wire for lighting Sub –mains, 6 Amp one way switch , 2mm thick PVC conduit/ Channel with bends , Junction boxes etc, 6Amp S pole MCB,10 Amp DP MCB , 2 way DB for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories.

Heating points :- One Heating point shall incl. Wiring for heating points in 2.5Sq mm PVC insulated Multi-Strand Copper wire & 4 Sq mm PVC insulated multi-strand Copper wire for heating Submains, 16 Amp switch socked combined , 2mm thick PVC conduit/ Channel with bends , Junction boxes etc, 10Amp S pole MCB, 2 way DB for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories

Fan Point: One Fan Point shall incl. Wiring for fan points in 1.5Sq mm PVC insulated multi-strand Copper wire for 1200mm ceiling/225mm Exhaust fan with ceiling roses and PVC square block 350W electronic fan dimmer 2mm thick PVC conduit/Channel with bends , Junction boxes etc, 6Amp S pole MCB,10 Amp DP MCB , 2 way DB for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories.

Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge with Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, including fixing accessories such as nuts, bolts, fasteners etc. complete job