Construction of ekalavya model residential school in District Kinnaur SH Providing EI in Admn block therein

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Providing and installation of ultra slim decorative LED Batten Light suitable for 100 lumens/watt with minimum 2 year warranty with extruded aluminium heat sink, with antiglare polycarbonate diffuser and energy efficient constant current, integral electronic driver, suitable for input voltage: 220-240 V, 50/60 Hz, complete with all accesories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required, Make: Philips, GE, Twinkle or any other approved by Engineer-in-Charge.

LED Batten Light 20 Watt

Providing and installation of following type of Surface mounting Square type LED Panel Light , powder coated housing made of CRCA sheet, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including making connections, testing and commissioning etc. as required. Make: Philips, GE, Twinkle or any other approved by Engineer-in-Charge.

LED Panel Light 34 Watt. (Size:- 2' x 2' feet)

LED Panel Light 34 Watt. (Size:- 1' x 1' feet)

Providing and installation of Decorative wall Bracket with Nickel finish square base with bend pipe & Globe glass, suitable for indoor applications, complete with all accessories, including making connections, testing and commissioning etc. as required.Make: Philips, GE, Twinkle or any other approved by Engineer-in-Charge.

Decorative Wall Bracket

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and fixing electrical switch board, having 4 No. of 5/6 amp. Modular Switches and Modular Socket on suitable size of G.I. modular boxes of 12 modules (205mmx135mmx60mm) deep ( nominal size) on surface or in recess with suitable size along with modular base and cover plate for modular switches in the front including providing and fixing 4 No. 5 pin 5/6 amp modular socket outlet and 5/6 amp modular switch, connection, painting etc.as required. (For Light Plug/Computer Points)

Providing and installation of following type of LED Batten LIGHT 10 Watt. Extruded Aluminium batten available in 2ft run length with multiple lumen packages with minimum 2 year warranty suitable for input voltage: 220-240 V, 50/60 Hz, complete with all accesories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required, Make: Philips, GE, Twinkle or any other approved by Engineer-in-Charge.

LED Batten Light 10 Watt. (length 2 Feet)

Providing and installation of following type of Surface mounting round type LED Downlight in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including making connections, testing and commissioning etc. as required. Make: Philips, GE, Twinkle or any other approved by Engineer-in-Charge.

LED Downlight 6 WH RD

LED Downlight 15 WH RD

Providing and installation of following type of Fress Air Ventilating fan Non-metallic range with lower Shutter of following sizes in the existing opening, including making the hole to suit the size of the fan, making good the damages, connections, testing and commissioning etc. as required Make: Havells, Khaitan, Bajaj, Crompton, Standard or any other approved by Engineer-in-Charge.

Fress Air Ventilating fan 250 mm sweep

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:-

Armoured cable 10 sq. mm (3.5 core)

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Supplying and fixing G.I. tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x6.0 Sq. mm.

2x10 Sq. mm.

2x16 Sq. mm.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 Nos HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

4x1.5+2X1.5 Sq. mm.

Wiring for circuit/sub-main with 4x2.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.2.5 Sq.mm.(4X2.5+2X2.5) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole 5/6 Amp. Cat-A.

Single pole 15/16 Amp. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

25 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-6 way

Double door-8 way

Providing, fixing and installation of following rating and breaking capacity MCCB with Thermal Release Having inbuilt Overload and Short Circuit Protection in the existing cubical panel board including drilling holes in the cubical panel, suitable for input voltage: 415/500 Volt AC, 50 Hz, complete with all accesories, including making connections, testing and commissioning etc. as required, Make: L&T, Havells or any other approved by Engineer-in-Charge.

MCCB DN0-100D 3-Pole 63 Amp, Breaking Capacity 36-KA

MCCB DN0-100D 3-Pole 100 Amp, Breaking Capacity 36-KA

Supplying and fixing of MCCB Enclosure,suitable for 3-pole or 4-pole MCCB, on surface / recess, complete with tinned neutral link, earth bar, din-bar, detachable gland plate, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Make: L&T, Havells or any other approved by Engineer-in-Charge.

MCCB Enclosure Size-I for DU100H/DU125H/DU100D/DU125D/DN0

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 35 mm x 35 mm x 6 mm thick duly welded complete with 2.80mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required:-

Supplying and fixing sheet metal bus-bar chamber suitable for 63 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 300mm & cross-sectional area (16mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx350mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-

Supplying and fixing sheet metal bus-bar chamber suitable for 100 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 300mm & cross-sectional area (25.4mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx400mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-

ARUN KUMAR SHARMA