REPAIR TO TOILET BATH FLOOR INCLUDING SUNKEN PORTION AND ROOF TREATMENT TO OTM ACCN UNDER AGE B R I AT PATIALA MIL STN

Amount

Dismantling floor hearth wall tilling including CM(beading bud not backing ),removing serviceable tiles to store & rubbish off the premises.

M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified by Engineer-in-Charge. Make : Johnson (Matt Series-Bottichino Ivory Brown) or equivalent from Kajaria/Somany as approved by AO

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 6-8 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified by Engineer-in-Charge. Note : Dado should be flushed with the wall plastering. Make : Johnson (Digital HD Tiles) (Barstow Dark/Light/HL or Sobaro Deep/Bright/Bright Decor) or equivalent from Kajaria/Somany as approved by AO

Demolition of cement concrete (un-reinforced) in any thickness(below or above ground level), complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:3) mixed with water proofing compound @ 0.20 Ltr/bags on roof surface where concrete is green.

Supply only integral water proofing compound complete all as specified & directed by Engineer-in-Charge. Make : Pidilite/Sika

Applying three coat of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg/ sqm all as specified by Engineer-in-Charge.

M&L for PCC 1:2:4 type B0 Using 12.5 mm graded stone agg as in as in PCC combing / benching on floor/ wall juction of sunken portion complete all as specified and directed.

PCC 1:7:12 mix, type E2 ( using 40mm graded brick aggregate ) as in filling of sunken portion complete all as specified and directed by Engineer-in-Charge.

Providing 50mm dia GI pipe medium grade spouts 50cm long including taking down existing pipe complete all as specified and directed by Engineer-in-Charge.

PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate 25mm thick as in bedding layer under floor tiles etc complete all as specified and directed by Engineer-in-Charge.

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified by Engineer-in-Charge.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor ctc complete all as specified by Engineer-in-Charge.

Taking up or down existing steel tubing and connections, 20mm bore complete all as specified by Engineer-in-Charge.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor ctc complete all as specified by Engineer-in-Charge.

S&F overhead shower 70mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified by Engineer-in-Charge. Make : Cera/Jaquar/Marc/Prima

S&F Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified by Engineer-in-Charge. Make : Jaquar (Cat No. CON-CHR-107KN)/Marc/Prima

S&F Stop valves, fancy type, CP with long shank and cup ( concealed typee ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified. Make : Jaquar/Marc/Prima

S&F Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified by Engineer-in-Charge. Make : Jaquar/Marc/Prima

S&F Sink Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make : Jaquar/Marc/Prima

S&F Pillar taps, fency type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed in repairs all as specified by Engineer-in-Charge. Make : Jaquar/Marc/Prima

S&F vitreous china premium/1st quality wash basin half pedestal, white/ivory/off white, flat back, size 500x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and completein all respect as per manufacturer's instructions and taking down existing of any description/size all as specified by Engineer-in-Charge. Make : Hindware (WHB-Cleo (Cat No.- 10012), Waste Coupling-Cat No.- F850023 (Economy Model), Bottle Trap-Cat No.- F850072 (Economy Model) or equivalent from Parryware/Cera as approved by AO

S&F 20mm dia towel rail CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified by Engineer-in-Charge. Make : Jaquar/Cera/Hindware/Marc/Prima

S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish with wooden beading french polished, etc.complete fixed in position all as specified and directed by Engineer-in-Charge.

S&F soap dish,stainless steel of suitable size to accommodate soap , tooth brush glass and tooth paste complete all as directed and specified.

S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 including 32mm waste pipe and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed by Engineer-in-Charge. Make : Sink :- Nirali (Elegance) or Diamond (REK 3618) or Neelkanth

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors except G.F.and taking down existing of any description/size complete in all respect all as specified by Engineer-in-Charge. Make : Cera (Conventional) or equivalent from Parryware/Hindware as approved by AO

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified by Engineer-in-Charge. Make : Hindware (Sleek Essence Dual Flush) or equivalent from Parryware/Cera as approved by AO

S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified by Engineer-in-Charge. Make : Hindware (Cat No. - F160013) or equivalent from Parryware/Cera as approved by AO

S&F PVC connections 15mm size with brass nuts of length 450mm complete all as directed and specified by Engineer-in-Charge.

S&F stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified by Engineer-in-Charge.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified by Engineer-in-Charge.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay) and similar small articles conforming to Fe-290 Gde-E-165 all as specified by Engineer-in-Charge.

PVC(HDPE) SWR , 110 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction, fixed to wall complete all as specified including fixing of pipe to wall with flat iron clamp of size 25x3mm, bolts washers, nuts, nails etc, after taking down existing damaged rain water pipe complete all as specified and as directed by Engineer-in-Charge. Make : Astral / Prince / Finolex

PVC (SWR) bends/tees of any radius for 110mm bore with access door as in repair complete all as specified by Engineer-in-Charge. Make : Astral / Prince / Finolex

Cast iron soil, waste and vent pipe, Centrifugal type 100mm bore, spun cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified including taking down of existing unserviceable pipe.

Cast iron soil, waste and vent pipe, Centrifugal type 100 mm bore, spun cast in any length, with or without ears, with lead joints, laid in trenches including necessary earth work complete all as specified.after including down of existing unserviceable pipe.

M&L Cast iron multifloor trap 110 mm dia and 600 mm long including jointing with solvent cement in repair complete all as specified and directed by Engineer-in-Charge.

Cast iron bend duck foot or heelrest, radius for 100mm bore pipe, as in repairs, complete all as specified and directed by Engineer-in- charge

S&F cast iron juction combination 'T' equal or unequal for 100mm bore with access door as in repair complete all as specified and directed by Engineer-in- charge

S&F CI nahani trap incl jointing to waste pipe in neat cement 100mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and directed by Engineer-in- charge

M&L extra over cast iron pipe fitting with lead joints in liew of cement joints in liew of cement joints complete all as specified and directed by Engineer-in- charge

M&L for cast iron cowl of 100mm dia complete all as specified and directed by Engineer-in- charge

Salt glazed stone-ware gully traps,Centrifugal type 150 x 150mm size , square or roundmouthed, type 'P' or 'S' incl CI grating fixed in repair complete all as directed and specified by Engineer-in- charge

Takingdown chowkhat or frame not exc 1.5 sqm without taking down shutter from the frame, reparing the same as necessary, refixing the same at appropriate place, fixing lugs/holdfast in walls in PCC 1:2:4, finishing the disturbed portion to match with existing surface complete all as specified and directed. (Note: Disturbed protion of existing floor/wall/tile/plaster, interior or exterior emulsion finishes etc.during fixing of chowkhats shall be repaired to match with existing finish. Cost of the same will be included in this item.)

Supply and fix viterious china premium / first quality urinal half style type white / ivory / half white, flat back, screwed and plug and brackets etc. all accessories recommended by manufacturer incl CP bottle trap 32mm let and outlet screws for pipe or connection including necessary accessories for fixing, packing, union and including 32mm brass CP waste coupling and complelet in all respect as per manufacturer instructions and taking down existing urinal of any description / size all as specified by Engineer-in- charge

S&F viterious china / 1st quality premium urinal parttiion of size 310x770mm white / ivory / half white screwed and plug and brackets etc. all accessories recommended by manufacturer and taking down existing urinal partition of any description / size all as specified.

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified by Engineer-in- charge

Demolition of mud phuska on roof any thickness all as directed by Engineer-in- charge

Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified by Engineer-in- charge

PCC 1:2:4, type B-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 20mm to maintain a slope of 1:100 ,complete all as specified and directed by Engineer-in- charge

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified by Engineer-in- charge

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed by Engineer-in- charge Make : Sika/STP/Fosroc

M&L for PCC cement concete tiles of size 250x250 and 20 to 25mm thick laid as in roof floor over 15mm thick (1:4) cement bed, set, jointing and pointing with grey cement and pigment complete all as directed by Engineer-in- charge

Preparation of old decorated plastered or unplastered surfaces of walls including bromming down or steel wire brushing , scrapping down smoke soot, moulds moss and efflorosecent salts and trading oil and greasy sports and including filling the nail holes/depressions by using filling compound of Altek/Birla white putty to obtain even and smooth finish and applyning one coats of dry distemper.

Hacking out old broken glass (any thickness size quality or description) from wooden or steel frame, M&L for 1.5mm thick unbreakable polycarbonate compact sheet made from 100% virgin bayer material for glass panes any sizes and location incl cutting and fixing on existing frame with silicon sealant with help of silicon gun all as specified and directed by Engineer-in- charge

DELTA CONSTRUCTION CO

m/s panchmukhi builders

Arneja Builders

AR CONSTRUCTIONS

NORTON BUILDER

RUPINDER SINGH SODHI