Raising and Strengthening of Sumdiri left bank embankment from CH. 0m to 5150m including extension upto right bank embankment of river Subansiri at Sumdirimukh

Amount

2.1: Clearing Grass and Removal of Rubbish Clearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per Technical Specification Clause 201. (i) By Manual Means (including 12% GST and 1% labour charge)

2.3: Cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling refilling, compaction compaction of backfilling backfilling and stacking stacking of serviceable serviceable material material by manual means with all lifts as per Technical Specification Clause 201. A. Lead upto 100 m ii. Girth above 600 mm to 900 mm (including 12% GST and 1% labour charge)

1.6: Uprooting bamboo clumps where bamboo already removed including removing stump to a distance as directed.

1.7: Cutting banana trees, uprooting roots & stumps including removing them from the site of work, etc. complete as directed

3.4: Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and comp g actin to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (including 12% GST and 1% labour charge)

1.10 (A): Haulage of materials by tipper excluding cost of loading, unloading and stacking. Case-III: Katcha Track and Track in River Bed/Nallah Bed and Choe Bed (including 12% GST and 1% labour charge)

3.12 Turfing with Sods Furnishing and laying of the live sods of perennial turf forming grass on embankment slope, verges or other locations shown on the drawing or as directed by the Engineer including preparation of ground, fetching of sods and watering as per Technical Specification Clause 309. (including 12% GST and 1% labour charge)

6.03: Construction of whole bamboo single palisading with matured bhaluka bamboo posts 7.5cm to 10 cm dia.,15 cm clear apart 1.50m to 1.80m above ground and 1.00m to 1.20m below ground with bhaluka bamboo inclined struts placed at 1.5m a part tied with three rows of horizontal half jati bamboo kamies etc. complete as directed. (Using Bhaluka Bamboo at the rate of 10.14 nos/ Rm & Jati Bamboo at the rate of 2.40 nos / Rm)

18: Supplying of serviceable best quality empty cement (polythene) bags of 50 kg capacity including taxes if any, delivered at work site.

6.16.1: Labour charge for laying and pitching earth filled cement bags including excavation and borrowing earth, breaking clods, filling in bags and supplying and stitching the mouth with jute sutli, etc. complete as directed. (cement bags will be supplied by the department free of cost). For borrowing earth from a distance up to 30m.

9.1: Excavation for Structures Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (including 12% GST and 1% labour charge)

17.10: Plain/Reinforced cement concrete, in open foundation complete as per drawing and technical specification including steel shuttering formwork. I. Without plasticiser A. PCC Grade M15 (including 12% GST and 1% labour charge)

12.5: Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 A. With Crushed Stone I. P.C.C grade M 15 i) Nominal mix (1:2.5:5)

9.4: Providing and Laying Reinforced Cement Concrete Pipe NP4 as per design in Single Row Providing and laying reinforced cement concrete pipe NP4 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. 1200 mm dia (including 12% GST and 1% labour charge)

Supply, carriage and fitting of HWE CI flap gate having spigot back and brass seats. 1200mm dia. Gate Frame & Shutter plate: CI IS:210 FG 200, Seat: Brass, Fasteners: MS IS:2062 Gr. B, Hinge: MS IS:2062 Gr. B.

14.1 Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 1301

6.34 Construction of temporrary shed of two roof with mud plinth of 0.45 m height above ground level with Bhaluka bamboo post 1.5 m apart driven at atleast 0.75 m below ground and height above plint 2.5m. Split Jatti bamboo wall mud plastering white washing 2 coats, 10 cm thick touch roofing over bamboo rua frame placing at 0.15 m clear apart fitted with bamboo kamies from binding doors and windows with Bamboo Chattai strengthening with Bamboo frame binding with wire etc compple as directed. (Using Bhaluka Bamboo at the rate of 6.00 nos/ Rm & Jati Bamboo at the rate of 61.00nos / Rm)

M.S. Channel, 150 x 75 mm for repairing of guide, bottom and top channels

M.S. Channel, 150 x 50 mm for shutter frames, stiffeners, girders etc.

M.S. Plate, 10mm for brkts, etc.

M.S. Plate, 6mm for shutter

M.S. Flat, 40 x 6 mm for rubber seal etc.

M.S. Electrode, 8 SWG.

C.I. Boss with internal thread cutting 2 TPI, making grove for bearing slot for lock plate and 1.5" drill for providing handle as per direction, 125mm x 150mm

M.S. Base plate, 300mm x 300mm x 10mm

M.S. Lock plate, 300mm x 300mm x 8mm

J'-type rubber seal, 75mm

Nuts & Bolts (Assorted size)

M.S. Washer (Assorted size)

Steel wire brush

Painting brush, 3"

Red oxide primer

Antisol red oxide paint

Turpentine oil

Nylon Rope

Gas cutting Nozzle

Jati bamboo

Hacksaw blade, 1.5" x 12" (D/E)

Coir rope

W.B. Grease

Filled D.A. Gas

Filled Oxygen Gas

Waste Cotton

HSD for Vehicle & Machine

Mobil

Hire charges for arc welding 3 phase 7.5 KVA portable Generator fitted with engine of capacity 12 HP, 1500 RPM to be deployed for welding at sluice gate site considering 8 (eight) working hours per day excluding fuel and operator's cost

Ordinary Labourer for handling of Sluice gate materials & cleaning of the sluice channel and allied works.

S.A. ENTERPRISE

ANUJ CHUTIA