Loading…
Loading…
Tender Value
₹1.9 Cr
EMD Value
₹3.8 L
Closing Date
18 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
14 conditions · 2 needing a document upload
IRGCC 2022 TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.2 2.Financial Eligibility Criteria: (As Per IRGCC Clause 10.2) 10.2.Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in Crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. 10.3 Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI. PLEASE READ ALL IRGCC TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.2 TO EVALUATE THE FINANCIAL ELIGIBILITY CRITERIA Non submission of Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet by the tenderer shall result in summarily rejection of his / their bid" ( Click here to download Format)
IRGCC 2022 TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.1 1.Technical Eligibility Criteria: (As Per IRGCC Clause 10.1) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR 2Two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR 3One similar work costing not less than the amount equal to 60% of advertised value of the tender Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. PLEASE READ ALL IRGCC TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.1 TO EVALAUTE THE TECHNICAL ELIGIBILITY CRITERIA
Defination of Similar Work :- Any Signalling Work of EI/PI/RRI/IBH/ABH/ LC Gate Interlocking/Track circuit works/Axle counter works etc.
11 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Complete tender document including NIT details, schedule, conditions is attached herewith. Tenderers are requested to read the tender document thoroughly before quoting their rates.
Tender will be governed as per latest standard Indian Railways General Conditions of Contract, works 2022 and their all correction slips. Tenderer are requested to read the latest IR GCC works 2022 and their all correction slips before submission of their offer and must be submit the all Annexures, documentary evidences, data as mentioned in IRGCC Works 2022 and their all correction slips.
All the documents in support of the Minimum Eligibility Criteria including Letter of Acceptance/Work Order, Documents showing the nature and total value of work, Completion report, Audited balance sheet, Attested certificate from Government employer, Copy of I.T. return etc. should be submitted along with the bid. Railway reserves the right to make or not to make any further reference to the tenderer regarding the fulfillment of the Minimum Eligibility Criteria and to award the tender only on the basis of the documents submitted by the tenderer along with the bid. The tenderer will not have any claim on this account.
Rights of the Railway to deal with Tender: The authority for the acceptance of the tender will rest with the Railway. It shall not be obligatory on the said authority to accept the lowest tender or any other tender, and tenderer(s) shall neither demand any explanation for the cause of rejection of his/ their tender nor the Railway to assign reasons for declining to consider or reject any particular tender or tenders. If the tenderer(s) deliberately gives / give wrong information in his / their tender or creates / create circumstances for the acceptance of his / their tender, the Railway reserves the right to reject such tender at any stage.
If the bidder submits Bid security in the form of Bank Guarantee "The original Bank Guarantee should be delivered in person receive and dispatch section of this office (i.e. DRM office, Signal & Telecom, Branch, West Central Railway, Jabalpur) before closing date for submission of bids (i.e. excluding the last date of submission of bids)
IMPORTANT NOTES WITH NIT: 1.As per Railway Boards letter no. 94/CE-I/4 Pt.17 dated: 13.08.2012, for all work contract valuing more than Rs.10 Crore, "two Packet System" of tendering mandatorily be followed. 2.As per Railway Boards letter no. 2002/CE-I/CT/37 JV Pt.VIII dated: 14.12.2012, "JOINT VENTURE FIRMS" shall now be applicable to the works tenders of value More than Rs. 10 Crores. 3.This is highly technical work to be executed only by qualifying MEC stipulated in tender document as per IR GCC 2022 with similar work issued vide CSTE office letter no. WCR/N-HQ/150/Wks/Policy/14 dated: 03.08.2018. No any relaxation in MEC will be given for any consideration. Firm failing to satisfy the MEC will be treated as ineligible firm. (IF MEC APPLICABLE) 4.In terms of railway board's letter no. 2020/CE-I/CT/3E/GCC/Policy dated: 30.12.2020, If the bidder is banned for submission of bids on the date of closing of tender, such bid, even if received, shall be treated as invalid while evaluating the bids. 5.Change of inspection authority may be done by engineer-incharge at a later date. 6.In case of more than one valid & eligible L-1 bidders, tender may be awarded to tenderer having higher bid capacity. In case bid capacity is also the same, tenderer having done more value of similar work in last three previous financial years and current financial years up to the date of the opening of the tender, may be selected for the award. Instructions with respect to bid capacity will follow. Supporting document for this may be clearly uploaded by tenderer with their offer. 7.West Central Railway Joint procedure order for undertaking earth work in the vicinity of electrical, signalling, telecom cables issued vide no. WCR/N-HQ/110/JPO Corrsp/Sig.-99 dated: 08.01.2024 instructed vide GM (S&T) JBP letter no. JBP/N.H.Q.120/Policy/T-1/Part-V dated: 10.01.2024 and procedure for undertaking digging work in the vicinity of signalling, electrical and telecommunication cables issued by railway board vid eno.2021/Tele/5(2)/3-Part(1)(3425647) dated 12.06.2023 or any other latest JPO by railways will be applicable in this contract. 8.It is responsibility of the contractor during execution the work near the track, that all safety precautions will be taken like; Safety Jacket, wearing of Safety Shoes and Helmet to avoid any type of causality. 9.The provisions contained in railways circulars, JPO's regarding penalties will be applicable for works requiring digging. 10.As per railway boards letter no. 2017/CE-I/CT/9 dated: 31.05.2023 "for all contracts costing more than Rs.5 crore, Contractor's e-MB is mandatory and contractor's e-MB should be part of Tender Document. All other provisions of railway boards letter no. 2017/CE-I/CT/9 dated: 31.05.2023 will be followed. (If applicable)
West Central Railway Joint procedure order for undertaking earth work in the vicinity of electrical, signalling, telecom cables issued vide no. WCR/N-HQ/110/JPO Corrsp/Sig.-99 dated: 08.01.2024 instructed vide GM (S&T) JBP letter no. JBP/N.H.Q.120/Policy/T-1/Part-V dated: 10.01.2024 and procedure for undertaking digging work in the vicinity of signalling, electrical and telecommunication cables issued by railway board vid eno.2021/Tele/5(2)/3-Part(1)(3425647) dated 12.06.2023 or any other latest JPO by railways will be applicable in this contract
It is responsibility of the contractor during execution the work near the track, that all safety precautions will be taken like; Safety Jacket, wearing of Safety Shoes and Helmet to avoid any type of causality.
S&T work in connections with turnout renewal in Itarsi-Satna Section of Jabalpur Division on West Central Railway (Signalling work)
JBP-N-SIG-TENDER-2026-15
JBP-N-SIG-TENDER-2026-15
Open
Works - General
11 Months
Jabalpur, Madhya Pradesh
₹0
₹3.8 L
18 May 2026
21 Apr 2026
4 May 2026
90 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,23,16,447.61 | ||
| — | 240.00 | — | — | ||
| Supply of Sealed Maintenance free VRLA Battery set of 60 cells (Stackable), in combination of 55+5 cells for SMPS based integrated power supply system, each cell of 2V/300AH capacity, fully charged, confirming to RDSO Specn. no. : IRS:S:93/96(A) with latest amendment. INSPECTION BY RDSO. | — | — | — | 11,84,805.6 | |
| — | 2.00 | — | — | ||
| Supply of SEALED MAINTENANCE FREE VRLA BATTERY SET OF 60 CELLS 2V/200 AH CAPACITY EACH (STACKABLE), IN COMBINATION OF 55+5 CELLS FULLY CHARGED FOR SMPS BASED INTEGRATED POWER SUPPLY (IPS) SYSTEM, CONFORMING TO RDSO SPEC NO. IRS : S-93/96(A) AMENDMENT NO.1 COMPLETE WITH CONNECTING LINKS AND SUITABLY NUMBERED IN STACKABLE RACKS ALONG WITH USER MANUALS. INSPECTION BY RDSO. | — | — | — | 4,31,823.36 | |
| — | 75.00 | — | — | ||
| Switch Plate lubricant Cenolube 100 or better Black colored which should be non- asphaltic Non bituminous blend of very heavy oils, inert thickeners and lubricating solids coupled with molybdenum disulfide and graphite with no traces of chlorinated solvent such as 1,1,1 trichloroethane which are flammable and harmful to the environment. Should have a blend of select high viscosity index solvent refined severely hydrofinished paraffin base oils and synthetic base fluids. It should incorporate solid lubricants & additives to fill & lubricate micronized asperities to provide & form many films on the contact surfaces to prevent metal-to-metal contact. It shall be designed to be hand applied providing a tough adherent Lubricant film with Tacky semi-dry finish reducing contaminant adhesion. It should act as a SURFACE POLISH with high shear stability and UV protection. The grease Should Not form a difficult to remove thick DRY film which requires scrapping & solvent cleaning of Switch Plate specially before reapplication The grease should Not need Cleaning or scrapping before Reapplication. The Grease should be formulated for tropical climates and should not contain pour point depressants and should Not be too thin. The grease shall be Resistant to water wash off & dilution, water insoluble, non-melt and chemically resistant to exposed environment. The grease shall be formulated with Extreme Pressure additives, rust and corrosion inhibitors, anti-wear additives to protect external surfaces against the harsh elements in severe climates, thus reducing rust binding and adhesive wear on switch plates. Water washout-Excellent ASTM D4049 -water Spray Resistance (simulating rain). Minimal grease loss (<10%) under high- pressure water spray. Four Ball Weld LOAD (ASTM- D2596) >600 kg. @ 100c (ASTM D 4048) 1a -1b, packing /25kg Drum. /180 kg drum Inspection by RITES with GCTC from NABL accredited lab. | — | — | — | 3,67,500.75 | |
| — | 100.00 | — | — | ||
| Supply of Electric Point Machine (Rotary locking Type), 110VDC operation (AC immunity 160V) as per RDSO drg. S-11000 with ground connection and clamp lock arrangement suitable or 220mm throw for thick web switches as per Specification no. IRS :S 24-2025 Rev. or latest. INSPECTION BY RDSO. | — | — | — | 99,75,385 | |
| — | 100.00 | — | — | ||
| Supply of "S" shape GI bend pipe medium class, 50 mm dia. and of 1 mtr length, for cable entry in point machines as per spec. IS:1239 (Pt. I) - 2004 or latest. Drawing no - Dy CSTE/C/BPL/011 INSPECTION BY CONSIGNEE | — | — | — | 28,853 | |
| — | 10.00 | — | — | ||
| Supply of Track Relay QTA2 (AC immunised relay), 9 Ohm, 4F/2B or 2F/1B along with plug board (Base plate), retaining clips and connectors conforming to BRS:939A, BRS:938, BRS:966, IRS:S34 & IRS:S23. INSPECTION BY RDSO. | — | — | — | 63,328.5 | |
| — | 50.00 | — | — | ||
| UGAM INSULMIX Solar Thermo-Reflective Exterior Coating For Cooling Of Roof Top, Size 20 Ltr in Plastic. INSPECTION BY CONSIGNEE. | — | — | — | 24,250 | |
| — | 2.00 | — | — | ||
| Supply of multi lamp route indicator for [LED double Digit] from 0 to 19 white LED with housing as per specification (a)Two Digit LED Route Indicator capable of Displaying 1 to 19Route & Route' G'. (b) Visibility of 300 Mtrs in Clear Day Light .(c) Option for white Colors, Chromaticity as per BS-13376 standard (d) Built with Robust AllnGan LED with junction temperature( Grater than 100 degree Celsius) (e) Lamp Proving compatible with normal Bulb type multi lamp type route indicator housing (f) input operating voltage 110VAC+25 % (g) Uniform intensity over entire operating range (h) operating Temperature - 10 degree Celsius to 60+ degree Celsius. Firm's accepted Make/Brand: EFFTRONICS or similar or better. INSPECTION BY CONSIGNEE. | — | — | — | 1,34,342.3 | |
| — | 25.00 | — | — | ||
| Supply of 'E' type lock complete with keys as per RDSO Drg. No. SA- 3473,3377 and specification No. 30/64.Ward to be specified by engineer in- charge. INSPECTION BY RDSO. | — | — | — | 51,560.5 | |
| — | 2.00 | — | — | ||
| Supply of MFP colour printer. Make: Brother, Model No. MFC-T920DW or similar equivalent or higher version. INSPECTION BY CONSIGNEE. | — | — | — | 54,598.6 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
3JPO10-1-2412-6-23.pdf
ATTACHMENT
1GCCWORKS2022ACS1TO11.pdf
ATTACHMENT
4Letterforshramikkalyanportal_1.pdf SHRAMIK KALYAN LETTER
ATTACHMENT
TD-15-TTR-119.pdf
ATTACHMENT
4Letterforshramikkalyanportal_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .