864/WS-47/2020-21

Amount

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation, shafts, wells, cesspits, manholes, pier holes, sewage line etc. and getting out in any type of soil, complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in and mass concrete, complete all as specified and directed by Engineer-in-Charge.

Removing excavated material not exc 50 mtr and depositing where directed at a level not exc 1.50 mtr above ground level, complete all as specified and directed by Engineer-in-Charge.

Removing excavated material exc 250 mtr but not exc 500 mtr and depositing where directed at a level not exc 1.50 mtr above ground level, complete all as specified and directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick rendering in CM 1:4 on brick work or stone masonry or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. Notes :- (a) As per site requirement water proofing compound shall be mixed with cement mortor. (b) Water proofing compound shall be measured and paid saperately under respective item.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6.0 mtr mean radius, built in CM 1:4, complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) as in benching, bed plates, copings and the like including necessary formwork and finishing all exposed surfaces, complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in bed of surface channels and drains, complete all as specified and directed by Engineer-in-Charge.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc., complete all as specified and directed by Engineer-in-Charge.

S&F anodised aluminium frame (powder coated) for doors, windows, ventilators with two rebates including joining cleats for fixing etc., complete all as specified and directed by Engineer-in-Charge.

S&F anodised aluminium door shutters, side hung type with sash bars, locking rails, locking arrangements including 150mm size heavy grade butt hinges and hydraulic door closing arrangement including necessary joinery cleats, glazing clips, rubber packing, chowkat aluminium snap beading, screws, suitable handles etc. with and including sheet glass of ordinary quality of 5mm thickness, size of lock rail 44.45x81.50mm, side rails 85x44.45mm, top rails 83.5x44.45mm, bottom rails 101x44.45mm and thickness of aluminium member 1.50mm, complete all as per Clause 10.37 of SSR Part-I (2009) and directed by Engineer-in-Charge.

S&F 4.80mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane, complete all as specified and directed by Engineer-in-Charge.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on aluminium frame, complete all as specified and drawings.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed by Engineer-in-Charge.

M&L for broken stone or boulders hardcore of gauge not exc 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in sub base, complete all as specified and directed by Engineer-in-Charge.

Dismantling plain or corrugated sheet of any gauge and thickness of roof covering etc., complete all as specified and directed by Engineer-in-Charge.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified and directed by Engineer-in-Charge.

Dismantling timber scantling, 40 Sqcm and over in section, in any position, complete all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets of any thickness including cover fillets, complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) as in ground floor and paving, not exc 15cm thick below or above ground level, complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer-in-Charge.

M&L for rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W (Gde-E-250) Quality 'A', complete all as specified and directed by Engineer-in-Charge.

S&F 0.50mm thick prepainted galvalume aluminium zinc coating steel GI based corrugated steel sheet of any colour having tensile strength of 550 Mps as in roof covering/caldding to wall, fixed with self taping screws, complete all as specified and directed by Engineer-in-Charge.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc, complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6.0 mtr mean radius, built in CM 1:6, complete all as specified and directed by Engineer-in-Charge.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 28.00 above but 5mm dia and over upto 10mm dia as in strirrups, spacers and binders.

M&L for formwork to rough finished sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams etc. complete all as specified and directed by Engineer-in-Charge.

M&L for RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in beams, cantilevers, bressummers, lintel over 1.5 Mtr span, complete all as specified and directed by Engineer-in-Charge.

M&L for 40mm thick DPC (damp proof course) in cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) mixed with integral water proofing compound, to horizontal or vertical surfaces including necessary formwork complete all as specified and directed by Engineer-in-Charge. Note :- Integral water proofing compound shall be measured and paid separately under respective item of BOQ.

M&L for preparation of new surfaces of wooden or wooden based articles of any description, exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer, complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore galvanised steel water tubing, medium grade including short lengths with all fittings such as tees, elbows, sockets, bends, union, nipples, brass nuts and diminishing pieces etc. complete, fixed to walls or ceiling or laid in floors, complete as specified and directed by Engineer-in-Charge.

S&F 20mm bore galvanised steel water tubing, medium grade including short lengths with all fittings such as tees, elbows, sockets, bends, union, nipples, brass nuts and diminishing pieces etc. complete, fixed to walls or ceiling or laid in floors, complete as specified and directed by Engineer-in-Charge.

M&L for lagging to 15mm bore pipe, used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed SNAPON section of sensity 144Kg/Cum, confirming to IS-9842, provided with chicken mesh netting 25 gauge 20mm mesh binging wire and reinforecement with plaster of paris, complete all as specified and directed by Engineer-in-Charge.

M&L for lagging to 20mm bore pipe, used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed SNAPON section of sensity 144Kg/Cum, confirming to IS-9842, provided with chicken mesh netting 25 gauge 20mm mesh binging wire and reinforecement with plaster of paris, complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in landings, cover slabs (for manholes etc.), chullahs, hoods, chajjas, water troughs, shelves and the like, complete all as specified and directed by Engineer-in-Charge.

Supply only Integral water proofing compound.

S&F factory made solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with MS square tube and fixed at site, complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement with all fitting and fixtures and fixed at site, complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodised barrel tower bolts of extruded section, 100mm size. complete all as specified.

S&F 75mm size butt hinges, medium weight, cold rolled mild steel.

S&F 100mm size extruded aluminium alloy handle, fabricated type, anodised, complete all as specified.

M&L for 25mm thick PCC 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregates) as in flooring / sub base of floor etc., complete all as specified and directed by Engineer-in-Charge.

M&L for non skid ceramic coloured tiles, 7-8mm thick (square/rectangular), area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, as in floor etc., set and jointed with neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15mm thick screed in CM 1:4, complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic coloured tiles of size 450x300mmx7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering in CM 1:4, complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore bib tap, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, complete all as specified and directed by Engineer-in-Charge. Make :- Prayag Cat Part No. 7308 or technocommercially equivalent make as listed in Particular Specifiactions.

S&F 15mm bore stop valve, fancy type, cast copper alloy, chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for union, complete all as specified and directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed by Engineer-in-Charge.

S&F 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed by Engineer-in-Charge.

S&F 75mm bore PVC (SWR) bend, any radius with access door, complete all as specified and directed by Engineer-in-Charge.

S&F steel ventilator with centre hung shutter including hinges, steel peg stay, complete all as specified and directed by Engineer-in-Charge.

M&L 75mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregates), as in plinth protection, laid in alternate ways (not exc 2.0 Sqm each), finished the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

S&F 1000 Ltrs capacity rotational moulded polythylene water storage tank, tripple layered, white in colour (cylindrical vertical with closed top), hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for 20mm bore iron pipe and fixed (minimum weight 20mm -210 gms) complete all as specified and directed.

S&F 3mm thick figured glass, pin head type, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. and removal of debris outside MoD land, complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or PCC solid block work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm but not exc 4.0 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engineer-in-Charge.

S&F anodised aluminium door and cupboard shutters, aluminium section weighing 0.55 Kg/Rm including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading, screws etc. complete all as specified and directed by Engineer-in-Charge.

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/Rm including necessary joining cleats, glazing clips, rubber packing, hinges, anodised aluminium snap beading, screws etc., complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed by Engineer-in-Charge.

S&F 4mm thick ordinary quality sheet glass, glazing with oil putty in square not exc 0.50 Sqm each pane, complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to aluminium window, complete all as specified and directed by Engineer-in-Charge.

S&F solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified.

S&F 100mm size butt hinges, stainless steel, medium weight.

S&F 75mm size butt hinges, stainless steel, medium weight.

S&F 125mm long anodised aluminium handle, cast type, complete all as specified.

S&F 150mm long anodised aluminium handle, cast type, complete all as specified.

S&F aluminium anodised barrel tower bolts of extruded section, 200mm size. complete all as specified.

S&F aluminium anodised barrel tower bolts of extruded section, 150mm size. complete all as specified.

S&F 300mm size aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or xtruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.

S&F in replacement 19/20mm dia aluminium anodised powder coated, decorative type curtain rod with fixing brackets, stops, rollers etc., complete all as specified.

M&L for non skid coloured ceramic tiles, 7-8mm thick (square/ractangular), area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick in CM 1:6 screed bed or bedding layer, complete all as specified and directed by Engineer-in-Charge.

M&L for granite work with 18-20mm thick slab (of any type), table rubbed and polished, as in steps, window cills, cooking platforms and the like in single piece, set in neat cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed by Engineer-in-Charge.

M&L for brick work EXCEPT BRICKS, straight or curved on plan exc 6.0 mtr mean radius, built in CM 1:6, complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L for Forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A', complete all as specified and directed by Engineer-in-Charge.

S&F mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed by Engineer-in-Charge.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers as in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 84.00 above but EXCEPT SHEET.

S&F wind tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches etc. king rods and straining bolts confomiing to Fe-290 Gde-E-165, omplete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including 3mm thick wall care putty, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted steel surface, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement 500 Ltrs capacity rotational moulded polythylene water storage tank, tripple layered, white in colour (cylindrical vertical with closed top), hoisted and fixed in position including 25mm bore brass ball valve, high pressure with polythene float and flynut, 20mm bore tank nipple suitable for HDPE water tank and including 20mm bore gun metal gate valve with iron wheel head, complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15mm bore steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed by Engineer-in-Charge.

Taking up or down 20mm bore steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement vitreous china, wash hand basin, flat back of size 550mm x 400mm (Padestal pattern), ivory/superior colour including MS brackets (As required at site) and cutting for and pinning ends including 32mm dia brass CP waste fitting and PVC connection pipe of size 15mm dia, 600mm long including makng good disturbed surface to match with existing surface, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement 15mm bore CP basin mixture tap of standard quality for mixing hot & cold water with centre hole mixer with fittings suitable for WHB, complete all as specified and directed. Make :- Prayag Cat Part No. 8750 or technocommercially equivalent make as listed in Particular Specifiactions.

S&F in replacement 15mm bore CP wall mixture of standard quality for mixing hot & cold water, screwed down with provision of over lead shower and cock, suitable for iron pipe and fixed, complete all as specified and directed. Make :- Prayag Cat Part No. 8850 or technocommercially equivalent make as listed in Particular Specifiactions.

S&F in replacement vitreous chine wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover, white, closed pattern with recessed bottom and connection to drain pipe and to flushing pipe, anti-syphonage pipe etc., complete all as specified and directed by Engineer-in-Charge.

S&F in replacement PVC low level flushing cistern 10 Ltrs capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe and PVC connection pipe of size 15mm dia, 600mm long, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement health faucet, CP, with connecting pipe 1 Mtr long with stand, complete all as specified. Make :- Prayag Cat Part No. BEA-81 or technocommercially equivalent make as listed in Particular Specifiactions.

S&F in replacement 20mm dia CP tubular towel rod, 60cm long between flange, complete all as specified and directed by Engineer-in-Charge.

S&F 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and directed by Engineer-in-Charge.

S&F 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and directed by Engineer-in-Charge.

S&F 110mm bore PVC (SWR) bend, any radius with access door, complete all as specified and directed by Engineer-in-Charge.

S&F grating doom 100mm dia of PTMT (Minimum weight 40gms), complete all as specified.

M&L 100mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregates), as in floor etc., complete all as specified and directed by Engineer-in-Charge.

M&L 80mm thick glazed coloured, machine pressed precast concrete interlocking paver block of any shape, finished type, confirming to IS-15658-2006, M-40 grade, laid over 25mm thick sand cushining and jointed in neat cement slurry with grey cement and no pigment, complete all as specified and directed by Engineer-in-Charge. Note :- Sand cushioning shall be measured and paid saperately.

M&L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new surfaces of steel or iron of any description, exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engineer-in-Charge.

S&F 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed by Engineer-in-Charge.

S&F 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls, complete all as specified and directed by Engineer-in-Charge.

S&F 75mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed by Engineer-in-Charge.

S&F 75mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified.

S&F in replacement chromium plated toilet paper holder fixed with brass screw, complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in kerbs, packing of interlocking paver block, complete all as specified and directed by Engineer-in-Charge.

Supply & Laying 150mm bore Salt Glazed Stone Ware (SGSW) drain pipes, laid in trenches and jointed, complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed by Engineer-in-Charge.

M&L for LLDPE septic tank, designed to carry and sluge water, excavation in any type of soil, PCC 1:4:8, type D-2 below foundation, vent shaft, connection etc. complete for 10 users, complete all as per drawings and directed by Engineer-in-Charge.

Excavation in post holes (or similar holes) each not exc 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm thick, complete not exc 1.50 mtr deep in any type of soil, complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4, type B-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in and mass concrete, complete all as specified and directed by Engineer-in-Charge.

S&F mild steel posts and struts including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engineer-in-Charge.

M&L for steel work in tubular trusses & purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade ST-240, complete all as specified and directed by Engineer-in-Charge.

Taking down carefully existing aluminium / copper point wiring on batten or in PVC conduit or in MS conduit with earth wire etc. (for light, fan, socket or power) complete and making good the disturbed surface of walls, ceilings etc. to match with existing surface, complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring for one light point / fan point, controlled by one switch SP 230 volts with 1.5 Sqmm copper conductor cable (multistranded) PVC insulated FRLS, unsheathed, surface type, drawing in and including PVC casing & caping or PVC conduit 19mm dia, ISI Marked having wall thickness not less than 2mm with sunk cast iron/pressed steel terminal boxes, made out of 1.2mm thick sheet including one coat red oxide primer on internal and external surface covered with 3mm thick hylam brand IS-2036 Marked laminated sheet cover (for mounting switches, sockets, regulators etc.) including 1.5 Sqmm PVC insulated (multistranded) FRLS unsheathed copper conductor earth wire, complete all as specified and directed by Engineer-in-Charge. Make of wire :- Havells / KEI / HPL / Polycab

All as per Srl item No. 123.00 above but using 2.5 Sqmm copper conductor cable (multistranded) PVC insulated FRLS unsheathed with and including 1.5 Sqmm green solid copper conductor cable, PVC insulated FRLS unsheathed as continuous earth wire with lugs for 3/6 Pin 15 Amps socket outlet controlled by one switch on independent board. Make of wire :- Havells / KEI / HPL / Polycab

S&F switch piano, flush type, single pole, one way, 5 Amps, complete all as specified and directed. Make :- Anchor / Cona / Standard / SSK

S&F switch piano, flush type, single pole, one way, 15 Amps, complete all as specified and directed. Make :- Anchor / Cona / Standard / SSK

S&F socket outlet 2 in 1, 3 pin, 5 & 15 Amps, flush type, complete all as specified and directed. Make :- Anchor / Cona / Standard / SSK

M&L for point wiring complete with PVC insulated and unsheathed, copper conductor cable, multistanded FRLS, single core 1100 volts grade electric cable of size 1.5 Sqmm (nominal area) in and including concealed rigid PVC conduit/casing and caping of suitable size (as per site requirement) and including 1.50 Sqmm PVC insulated & unsheathed copper cable as continuous earth wire with all accessories including lugs required, complete all as specified and directed for one light point or one fan point, controlled by one switch SP 230 volts, complete all as specified and directed by Engineer-in-Charge. Make of wire :- Havells / KEI / HPL / Polycab Note :- Modular white cover plate with frame and metal flush box shall be measured and paid saperately under respective item of BOQ.

All as per Srl item No. 128.00 above but for one 3/5 Pin 5 Amps socket outlet point, controlled by one switch on independent board.

All as per Srl item No. 128.00 above but for one 3/5 Pin 5 Amps socket outlet point controlled by one switch on same board.

All as per Srl item No. 128.00 above but for one light point controlled by two way switch on independent board.

All as per Srl item No. 128.00 above but using 2.5 Sqmm single core, multistranded copper conductor PVC insulated and unsheathed FRLS cable for 3/6 pin 15 Amps socket outlet controlled by one switch on independent board with and including 1.5 Sqmm green solid copper conductor cable, PVC insulated FRLS unsheathed as continuous earth wire with lugs. Make of wire :- Havells / KEI / HPL / Polycab Note :- Modular white cover plate with frame and metal flush box shall be measured and paid saperately under respective item of BOQ.

All as per Srl item No. 128.00 above but using 4.0 Sqmm single core, multistranded copper conductor PVC insulated and unsheathed FRLS cable for 3/6 pin 15 Amps socket outlet controlled by one switch on independent board with and including 2.5 Sqmm green solid copper conductor cable, PVC insulated FRLS unsheathed as continuous earth wire with lugs. Make of wire :- Havells / KEI / HPL / Polycab Note :- Modular white cover plate with frame and metal flush box shall be measured and paid saperately under respective items of BOQ.

S&F bell electric, ding dong type, AC 230 Volts, single pole, complete all as specified and directed. Make :- Anchor / Cona / Standard

S&F modular bell push, 6 Amps, one way, 1 module, complete all as specified. Make :- Anchor Roma / Legrand Aretor / Crabtree

S&F modular fan regulator, electronic rotary, 0-4 steps, 100 watt, 240 volts, 50 Hz, hum free, 2 module, complete all as specified and directed. Make :- Anchor Roma / Legrand Aretor / Crabtree

S&F modular switch 6 Amps, 230 Volts, one way switch, complete all as specified and directed. Make :- Anchor Roma / Legrand Aretor / Crabtree

S&F modular switch 6 Amps, 230 Volts, two way switch, complete all as specified and directed. Make :- Anchor Roma / Legrand Aretor / Crabtree

S&F modular switch 16/20 Amps, AC, 230 volts, one way, complete all as specified and directed. Make :- Anchor Roma / Legrand Aretor / Crabtree

S&F modular socket 6 Amps, AC, 230 Volts, 2/3 Pin combined, 2 module, complete all as specified and directed. Make :- Anchor Roma / Legrand Aretor / Crabtree

S&F modular socket 6/16 Amps, 2/3 Pin combined, AC, 230 Volts, 2 module, complete all as specified and directed. Make :- Anchor Roma / Legrand Aretor / Crabtree

S&F lamp holder insulated body PVC / Polycarbonate body with back plate suitable for batten fitting, complete all as specified and directed. Make :- Anchor / Cona / Standard

S&F ceiling rose, three terminals, polycarbonate isolated body, complete all as specified and directed. Make :- Anchor / Cona / Standard

S&F modular white cover plate with frame, 2 module and metal flush box 2 module, complete all as specified and directed. Make :- Anchor Roma / Legrand Aretor / Crabtree

S&F modular white cover plate with frame, 3 module and metal flush box 3 module, complete all as specified and directed. Make :- Anchor Roma / Legrand Aretor / Crabtree

S&F modular white cover plate with frame, 4 module and metal flush box 4 module, complete all as specified and directed. Make :- Anchor Roma / Legrand Aretor / Crabtree

S&F modular white cover plate with frame, 6 module and metal flush box 6 module, complete all as specified and directed. Make :- Anchor Roma / Legrand Aretor / Crabtree

S&F LED light fitting fixture 20 Watt, decorative ultra slim with co-extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly, energy efficient, ready to use, complete all as specified and directed. Make :- Havells Cat Part No. LHEXBXPNIN1WO20 / Wipro Cat Part No. LL20-221-XXX-65-NE / HPL Cat Part No. HLPT51820PCGCW / Philips Cat Part No. BN021CLED20SPSUCDLGR.

S&F LED mirror light fitting 1x10 Watt, 6500 K, decorative ultra slim linear LED lighting fixture with extruded aluminium heat sink, environmental friendly, energy efficient, complete all as specified and directed. Wipro Cat Part No. LL20-111-XXX-65-NE or technocommercially equivalent make of Philips / Havells

S&F 10 Watt, 6000 K LED bulk head luminaire with opal diffuser etc. complete with accessories, complete all as specified and directed. Make :- Havells Cat Part No. LHEXCGP7PN5W010 / HPL Cat Part No. HLPLEDBH10W(CW) or technocommercially make of Wipro / Crompton

S&F LED 10 Watt (candle/ball type) with B-22 base, complete all as specified and directed. Make :- Havells / Bajaj / Philips / Halonix

S&F decorative wall mounting chrome finish 3 Watt LED fixture 6000K, complete with accessories, complete all as specified and directed. Make :- Havells Cat Part No. LHEHCQPWIL1C003 or technocommercially equivalent make of Halonix / Bajaj

S&F decorative wall mounding bed light fitting, 3 Watt LED fixture 6000 K, complete all as specified and directed by Engineer-in-Charge. Make :- Havells / Halonix / Bajaj

S&F round / square surface mounted slim panel LED downlighter with complete diffuser, 18 Watt, complete all as specified and directed by Engineer-in-Charge. Make :- Wipro Cat Part No. LD81-171-XXX-60-SM / Crompton Cat Part No. LCDSPLN-R/S-18-CDL / Havells Cat Pat No. LHEAAVP7IL1W018

S&F sheet metal enclosure double door for mounting MCBs with 200 Amps rated busbar 4 way AC 240 volts with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed surface to match with existing surface, complete all as specified and directed by Engineer-in-Charge. Make :- L&T / HPL / ABB

S&F sheet metal enclosure double door for mounting MCBs with 200 Amps rated busbar 8 way AC 240 volts with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed surface to match with existing surface, complete all as specified and directed by Engineer-in-Charge. Make :- L&T / HPL / ABB

S&F MCB SPN 40 Amps, 240 Volts, 50 Hz, AC, made from moulded self-extinguishing thermostate plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed. Make :- L&T / HPL / ABB

S&F MCB SPN 63 Amps, 240 Volts, 50 Hz, AC, made from moulded self-extinguishing thermostate plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed. Make :- L&T / HPL / ABB

S&F MCB SP 6-32 Amps, 240 Volts, 50 Hz, AC supply, suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed. Make :- L&T / HPL / ABB

M&L for submain wiring with two single core FRLS PVC insulated flexible copper conductor cable of size 2x4 Sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 2.5 Sqmm as earth lead in and including PVC conduit / casing & capping and making good the disturbed wall surfaces to match with existing specifications, complete all as specified and directed by Engineer-in-Charge. Make :- Havells / Plaza / KEI / HPL / Paragon

S&F storage water heater 25 Litres capacity, vertical mounting, AC, 230 Volts, BEE 5 Star rating including connecting cord and plug, safety valve, nuts and bolts, PVC flexible connections (02 Nos) with length 450mm and 15mm dia with brass hexagonal adoptors both side duly ISI Marked suitable for hot/cold water complete including grouting of nuts and bolts / brass fastners of reuired size, complete all as specified and directed by Engineer-in-Charge. Make :- Havells / Venus / V Gaurd

S&F ventilating fan, made out of high quality engineering plastic, resistant to colour change with anti-static properties, 250mm sweep, suitable to work on 230 Volts, 50 Hz, AC supply including connecting to ceiling rose, complete all as specified and directed by Engineer-in-Charge. Make :- Havells / Bajaj / Crompton

S&F ceiling fan, AC, single phase, 230/240 Volts of size 1200mm sweep including connecting with PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50 Sqmm and hanging arrangements made out of MS clamps with nuts, bolts and washers, complete all as specified and directed by Engineer-in-Charge. Make :- Anchor / Almonard / Havells / Bajaj

S&F 60 Watts LED building security light fitting including suitable bracket and nuts, bolts etc., complete all as specified and directed by Engineer-in-Charge. Make :- Havells / Bajaj / Halonix

S&F instant water heater 03 Litres capacity, vertical mounting, AC, 230 Volts, BEE 5 Star rating including connecting cord and plug, safety valve, nuts and bolts, PVC flexible connections (02 Nos) with length 450mm and 15mm dia with brass hexagonal adoptors both side duly ISI Marked suitable for hot/cold water complete including grouting of nuts and bolts / brass fastners of reuired size, suitable inlet and outlet GI pipe line of 15mm bore as per site requirement, complete all as specified and directed by Engineer-in-Charge. Make :- Havells / Venus / V Gaurd

M&L for earthing complete with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm thick, burried directly in ground (Earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level, connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and earth strip, protected by provision of GI pipe, light grade, 20mm bore including provision of cement concrete pit in PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore GI pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40x6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard/dense soil, returning, filling in and removal of surplus soil to a distance not exc 50 mtr, complete all as per electrical plate No. 03 of SSR Part-1 (2009) and connecting to earth test point including testing on completion.

M/S PARVEZ AHMAD LONE

M/S SUHEEL CONSTRUCTIONS