LOT-02

Amount

Repair of Pot hole any depth including sweeping free from dust, mud or water cutting around edge to at least 25 mm depth, making good by filling including Laying & Consolidation of stone Ballast soiling 22.50mm to45 mm size in patch repair with Ballast in 15 cm loose thickness with 8-10 ton road roller including opening out stacks, sorting in proper size, spreading the material, making rectangular shape patch with all cost of labour, T&P, lead & Lifts complete as specified and directed by Engineer-In-charge

Providing & applying Primer Coat with bitumen emulsion (SS-1)as per I.S. 8887 on prepared surface of granular base including cleaning of road surface and spreading primer at the rate of 0.85 Kg./Sqm. Using machanical means. Before Applying prime coat, the surface will be cleaned with Mechanical broom and water will also be sprinkled with water tanker to keep the surface Moist. The Prime coat will be applied 24 hrs before the application of bituminous course including all Taxes, Material, Labour, T&P etc required for proper completion of the work. As per MORD specification No. 502 and as specified and directed by Engineer-In-charge.

Providing & applying Tack Coat with bitumen emulsion RS-1 using Emulsion distributor at the rate of 0.275 Kg./Sqm. on the prepared primed granular/old painted surface, cleaned with air compressor, including all Taxes, Material, Labour, T&P etc required for proper completion of the work, as per MORD specification No. 503 and as specified and directed by Engineer-In-charge.

Providing, laying & rolling of open graded Premix Carpet of 20mm thickness composed of 13.2mm to 5.60mm aggregates including mixing in a H M P, laying with Paver Finisher & rolling with a three wheeled 80-100KN Static Roller capacity, finished to required level & grades Bitumen VG-10 @ 14.6 Kg./ 10 sqm area for premixing including all Taxes, Material, Labour and T&P etc required for proper completion of the work, as per MORD specification No. 508 and as specified and directed by Engineer-In-charge.

Providing and laying seal coat type "B" sealing the voids in a bituminous surfsce P.C. surface laid to specified levels grade and cross fall using with coarse sand of Haridwar quarry @ 0.06 cum per 10 sqm with Bitumen VG-10 @ 6.80 kg/10sqm including heating of Bitumen to the required temperature and including all material , Labour & T&P etc. as per Clause 510 case-III of MORD Specification and as specified and directed by Engineer-In-charge.

Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Providing and fixing precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) kilometre stone as per standard design, including finishing smooth in 1:3 cement mortar (1 cement : 3 fine sand) but excluding the cost of earth work, concrete in foundation, painting and lettering etc. which shall be paid for separately. 35x111x25 cm size

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm

M/S RAKSHIT ASSOCIATES

M/S ASHOK KUMAR