GE/PNH-34/2024-25

Amount

M&L for Lifting /lowering unservicable submersible pump assembly completely any type/size up to 30 HP alongwith column/delivery pipe of 50/80mm dia after disconnecting the electrical connection from the deep tube well/Dugwell of various depth, segregating components for carrying out repair work such as rewinding of burnt motor and serviceing of pump etc and re-assembling after repair, lowering in to the bore well, including aligning and commissioning complete all as specified and directed. Note: (a) Unit rate quoted shall deemed to include only labour for taking up & lowering the submersible pump from bore well along with delivery pipe complete (b) Repairs/rewinding of submersible pump shall be measured & paid for separately under relevant items. (c) Replacement of coloumn pipe will be measured and paid for separately as supply only, under relevants items.

M&L for transporting the unserviceable submersible pump set upto 30 HP capacity from site to nearest authorised work shop, dismantling the pump motor assembly, replacement of unserviceable parts including servicing/overhauling the pump, re-assemblying and brought back to site complete all as specified and and directed.

Supply only following spare parts for submersible pump set vertical type up to 30 HP of existing make complete all as speified and directed:-

SS impeller

Thrust bearing

Thrust plate set

Sand Guard

Stainless steel bush

Pump Shaft

Non Return Valve

M&L for taking out the submersible pump set upto 30 HP capacity from site to nearest authorised work shop, dismantling and rewinding the burnt motor with suitable gauge of PVC insulated super enamelled copper wire as per manufacturer's instruction and reassemblying, testing and brought back to site complete all as specified and directed.

Supply only column pipe 80 mm dia galvanised iron medium grade, 3 metre in length, both ends flanged and duly welded complete all as specified and directed.

Supply only column pipe 50 mm dia galvanised iron medium grade, 3 metre in length, both ends flanged and duly welded complete all as specified and directed.

M&L for dismantling and taking out the centrifugal pumping set with motor from the existing foundation for carring necessary repair/ servicing by replacing the unservicable parts including fixing of new coupling (CI/rubber) as per existing all as required at site of work of capacity upto 25 HP, including re-fixing at same location including aligning and commissioning complete all as specified and directed. Note: (a) Unit rate quoted against this item shall deemed to include only labour for transportation and reapir. (b) Spares /rewinding of pump set shall be measured & paid for separately under relevant items.

Supply only following spare parts for centrifugal pump set up to 25 HP complete all as speified and directed:-

CI impellers

Diffuser

Neck ring

Shaft bush

Shaft

Roller bearing

Stuffing box gland.

Bearing 6307/6309/ 6312/7307/7308. Make SKF/SBC

M&L for dismantling and taking out the centrifugal pumping set with motor from the existing foundation for carring necessary repair/ servicing by replacing the unservicable parts including fixing of new coupling (CI/rubber) as per existing all as required at site of work of capacity upto 30 to 60 HP, including re-fixing at same location including aligning and commissioning complete all as specified and directed. Note: (a) Unit rate quoted against this item shall deemed to include only labour for transportation and reapir. (b) Spares /rewinding of pump set shall be measured & paid for separately under relevant items.

Supply only following spare parts for centrifugal pump set up to 30 HP TO 60 HP complete all as speified and directed:-

CI impellers

Diffuser

Neck ring

Shaft bush

Shaft

Roller bearing

Stuffing box gland.

Bearing 6307/6309/ 6312/7307/7308. Make SKF/SBC

M&L for taking out worn out winding of centrifugal pump motor of capacity upto 25 HP carefully and rewinding the same with existing size of super enamelled copper winding wire, including necessary varnishing and insulating material baking etc, transportation to workshop and back to site complete all as specified and and directed by Engineer-in-Charge.

All as per item No 11 above but motor capacity 30 to 60 HP complete all as specified and and directed.

M&L for taking down/disconnecting the existing Star Delta starter of Centrifugal / submersible pump from motor control panels of various pump houses and replace with new Star delta starter of capacity 10 HP to 25 HP, three phase, including making electric connection, complete all as specified and directed. Make: C&S / BCH/ L &T/ ABB/ SHNEIDER/ GE

All as per item No. 13 above but of capacity 30 HP to 60 HP complete all as specified and and directed.

M&L for repair of starter panel with disconnecting all electric connections and replacement of unsv parts like contactor, relays, coil etc and connecting to the existing pump set of capacity up to 60 HP and testing taking , complete all as specified and directed.

M&L for replacement of MCCB, 35 KA capacity, 4 pole, 400 amps with necessary cable thimble and insulating material , complete all as specified and directed.

M&L for replacement of MCCB, 35 KA capacity, 4 pole, 250 amps with necessary cable thimble and insulating material , complete all as specified and directed.

M&L for repair to starter panel with replacement of worn out parts like connecting cables, voltmeter, ammeter, single phase preventer, indicator, CTs etc incl necessary insulation to bus bar, complete all as specified and directed.

M&L for replacement of unserviceable change over switch, enclosure type, powder coated with necessary connection of capacity 400 A complete all as specified and as directed.

M&L for replacement of unserviceable change over switch, enclosure type, powder coated with necessary connection of capacity 200 A complete all as specified and as directed.

S&F in repair Submersible cable flat three core PVC insulated and PVC sheathed industrial copper cable of size 16 Sqmm 1100 Volts for connection from starter to motor, complete all as specified and directed.

S&F in repair Submersible cable flat Three core PVC insulated and PVC sheathed industrial copper cable of size 6 Sqmm 1100 Volts for connection from starter to motor, complete all as specified and directed.

S&F in replacement manually Operated Oil Immersed Star Delta Motor Starter for 50 to 60 HP Motor, 3 phase, 415 Volt, with thermal over load relay, single phasing protection and free mechanism with single contact duly oil filled including testing and taking down old unserviceable starters complete all as specified and directed.

All as per item No. 23 above but motor capacity 25 to 40 HP complete all as specified and directed.

S&F in repair Cast iron reflux valve 100 mm bore, with by pass arrangment, complete all as specified and directed.

All as per item No. 25 above but 80 mm bore complete all as specified and directed.

All as per item No. 25 above but 50 mm bore complete all as specified and directed.

Supply and fixing in repair cast iron foot valve with Gun metal ring and ledgther gasket of size 80 mm complete all as specified and and directed.

Supply and fixing in repair cast iron foot valve with Gun metal ring and ledgther gasket of size 50 mm complete all as specified and and directed.

M&L for repalcment of pump set chasis with necessary welding work, replcement of mounting bolts and necessary PCC work complete all as specified and directed by Engr-in-Charge at site.

M&L for cleaning of under ground sump, semi under ground sump of capacity 10000 to 50000 gallons ( Drinking water sump) after bailling out of water from tank & cleaning of all sides of wall , top, bottom with fresh water, with the help of pressure jet pump ( Maxium pressure up to 120 bar ) and vacuum suctioner pump, spray of chemical for anti fungal approved by WHO on all sides of walls after cleaning and applying two coats of white wash on external surfaces and writing date of cleaning on the tank complete all as specified and and directed by Engineer - in -charge .

S&F in repair Earthing complete with galvanized Steel earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 metres below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized iron strip 32X6 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth wire protected by GI protection pipe light grade 40mm dia connected to main earth wire on pole or control board, GI pipe light grade 20mm bore for watering funnel with wire mesh PCC chamber pit in PCC 1:3:6 type C-1, 40mm thick Precast RCC cover reincorced with 8 mm dia TMT bars @ 10 cm C/C on both sides and handle including excavation and earth work in any type of soil and removal upto 50m complete all as sprecified and shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.

S&F in repair pump for priming of monoblock pump 1 HP single phase mounted on MS channel/angle iron including all necessary fittings complete all as specified and directed.

M&L for preparation of old steel surface by complete removal of old paint and Painting of pump/ motor of any type and any capacity and Pipe of any dia for complete surfaces by applying two coats of synthetic enamel paint over one coat of red oxide primer as per colour code on pump sets including SM/MES No of appropriate size of letters with white paint, complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:3:6 (nominal mix) type C-1 using 20mm graded crushed stone aggregate, as in foundation filling and mass concrete for haunching of pipe of any size complete all as specified and directed.

M&L for dismantling and taking out the centrifugal pumping set with motor from the existing foundation for refixing on another location/ Pump house by aligning and commissioning including necessary new foundation alongwith 8 Nos of "J" bolts and chasis of suitable size, connecting up all as required at site of capacity from 25 to 60 HP including necessary addition and alteration or modification to existing pipe line upto 150mm dia including cutting, welding, flanges, gasket complete all as specified and directed. Note: (i) Any bend, elbow, reducer, any short length, flanges, gasket, nut & bots etc is deemed to be included in quoted rate. (ii) Starter & cable to be measured and paid separately.

S&F in repair CI/DI flanged fittings like bends (any radius and angle) tappers any type (straight, bend, increasing, decreasing or double socket), Tee pieces single branch, "Y" junction, double branch, cross (all socket or socket spigot) collars, caps, caps & plug for pipes with spigot or flanged end of any size complete all as specified and directed.

S&F in repair metal pump & motor star coupling of size 4" dia suitable for existing pump set complete all as specified and directed.

S&F in repair metal pump & motor coupling tyre type of size 4" dia with nut & bolts suitable for existing pump set complete all as specified and directed.

S&F in repair rubber tyre coupling No. TC-013/014/016 of size 6" dia suitable for existing pully set of pump & motor with nut and bolts complete all as specified and directed.

S&F in repair rubber star coupling L-225 of size 125mm dia suitable for existing pully set including alignment of pump & motor complete all as specified and directed.

S&F in repair DOL starter 7.5 HP (MK 2) suitable for 7.5 HP 3 phase, 415 volts AC supply motor complete all as specified and directed.

S&F in repair Amp meter square type size 9.5 cm x 9.5 cm digital type with CT 03 Nos complete of suitable size complete all as specified and directed.

S&F in repair Amp meter square type size 5 cm x 5 cm analogue type with CT 03 Nos complete of suitable size complete all as specified and directed.

S&F in repair Volt meter square type size 9.5 cm x 9.5 cm digital type complete of suitable size complete all as specified and directed.

S&F in repair cooling pipe set incl nut and stud nipple alongwith aie release valve suitable for existing centrifugal pumps upto 60 HP as per existing make & model, complete of suitable size complete all as specified and directed.

S&F in replacement of thimble aluminium upto 300 Sqmm suitable for LT XLPE cable, complete of suitable size complete all as specified and directed.

Supply, laying , jointing and testing in repair of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 95 sqmm 3.5 core, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts including cable gland of suitable sizes and aluminium lugs for connection, complete all as specified and directed.

All as per Item No 48 above but size 3.5 core 70 sqmm complete all as specified and directed.

All as per Item No 48 above but size 3.5 core 50 sqmm complete all as specified and directed.

All as per Item No 48 above but size 3.5 core 25 sqmm complete all as specified and directed.

VIKAS ENTERPRISES (BID ID -3081415)

M/S PARSHOTAM KUMAR GUPTA (BID ID -3086881)

ABINASHI ENTERPRISES (BID ID -3094072)

SUNIL KUMAR SANGEET KUMAR AND SONS (BID ID -3085524)