Repair/Renovation of Girls Hostel Building Old Block of Govt. Degree College Kathua.

Amount

Demolishing cement concrete 1 : 3 : 6 or richer mix manually/ by mechanical means including disposal of material, all leads & lifts.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material in cement mortar, all leads & lifts.

Demolishing RCC work manually /by mechanical means incl. stacking of steel bars & disposal of unserviceable material ,all leads & lifts.

Dismantling old plaster or skirting, raking out joints & cleaning the surface for plaster including disposal of rubbish to the dumping ground with all leads & lifts.

Dismantling doors, windows and clerestory windows of area 3 sqm and below (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking ,all leads & lifts.

Taking out doors, windows,windows and clerestory window shutters (steel or wood) of area of 3 square metres and below including stacking of material, all leads and lifts.

Dismantling of flushing cistern of all types ( C.I /PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials incl. all leads, lifts & carriage of material by MT/H. L.

Dismentling G.I. pipes (external work ) 15 mm to 40 mm nominal bore including excavation and refilling trenches after taking out the pipes manually or by mechanically means incl. stacking of serviceable pipes , all leads & lifts.

Dismentling C.I. or Asbestos rain water pipes of 100 mm dia pipes with fittings and clamps including stacking the material , all leads & lifts.

Dismantling of manhole including R.C.C. top slab, C.l. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead :Rectangular manhole 120x90 cm and 9.0 cm deep

Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope, relaying plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 ( 1 cement : 3 fine sand ) including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 metres lead.

Raking out joints in lime or cement mortar and preparing the surface for repainting or replastering including disposal of rubbish to the dumping ground within 50 metres lead.

Flush pointing with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight With F.P.S. brick tiles

Making Khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 Coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1 m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete incl. all leads, lifts & carriage of material by MT/ H.L.

Providing gola 75 x 75 mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 10mm down gauge) including finishing with cement mortar 1:3 ( 1 cement : 3 fine sand) as per standard design in 75 x 75 mm deep chase incl. all leads, lifts and carriage of material by MT / H.L.

Providing and fixing on wall face un- plasticized rigid PVC rain water pipes 110 mm diameter conforming to IS:13592 Type -A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion single socketed pipes.

Providing and fixing on wall face unplasticised – PVC moulded fitting/ accessories for unplasticised –Rigid PVC rain water pipes conforming to IS : 13592 type A incl. jointing with seal ring conforming to IS: 5382 leaving 10mm gap thermal expansion . Bend 87.5* 110 mm bend.

Earth work excavation in all kind of soil by manual means in trenches for foundations, drains, pipes, cables etc. ( Not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5m incl. disposal/filling of excavated earth all leads & lifts complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering including all leads, lifts & carriage of material by MT / H.L.- All work upto plinth level.1 : 5 : 10 ( 1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size) .

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)including all leads, lifts & carriage of material by MT/ H.L

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) including all leads, lifts and carriage of material by MT / H.L.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level. 1:1.5:3 ( 1 cement : 1.5 coarse sand: 3 graded crushed stone aggregate 20 mm nominal size) including all leads, lifts and carriage of material by MT / H.L.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including all leads, lifts and carriage of material by MT / H.L.

Reinforcement for RCC work including raightening, cutting, bending, placing in position and binding all complete Thermo Mechanically Treated bars /Cold twisted bars including all leads, lifts and carriage of material by MT / H.L.

Centring and shuttering including strutting propping etc and removal of form work for

Foundations, footings, bases of columns etc. for mass concrete

Weather shade. Chajjas, corbels etc., including edges

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth including all shapes, leads, lifts and carriage of material by MT / H.L. in cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work in superstructure above plinth level upto floor V level (By manual means) incl. all leads, lifts and carriage of material by M.T. H.L.

Half brick masonry with bricks of class designation 75 in foundations and plinth in cement mortar 1:4 ( 1 cement :4 coarse sand) including all leads, lifts and carriage of material by MT / H.L.

Extra for half brick masonry in superstructure above plinth level upto floor V level including all leads, lifts and carriage of material by M.T. H.L.

12mm cement plaster of mix 1:4( 1 cement : 4 fine sand) including drip course/groove all leads, lifts and carriage of material by MT / H.L.

15mm cement plaster on rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand) including drip course/groove all leads, lifts and carriage of material by MT / H.L.

Making plinth protection 50 mm thick of cement concrete 1:3 : 6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed & consolidated & grouted with fine sand incl. finishing the top smooth. Crushed aggregate incl.all leads, lifts & carriage of material by MT/H.L.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape ranking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and fixing 35mm thick panelled or panelled and glazed shutters of Second class deodar wood for door, windows and clerestory windows including ISI marked black enameled M.S.butt Hinges with necessary screws including Panelling of Particle Board 12mm thick Plain particle board flat pressed, 3 layer (like Novapan, Ecoboard etc)or graded wood particle board (like Bhuttan Board) medium density grade 1, IS : 3087 marked

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick , Particle Board 12 mm thick plain particle board flat pressed, three layer or graded wood particle board medium density grade IS: 3087 marked.

Providing and fixing 35 mm thick wire gauge shutters of 2nd class deodar wood using Galvanised M.S. wire gauze of average width for aperture 1.4 mm with wire of dia 0.63 mm for doors, windows and clerestory windows incl. ISI marked bright finished or/ and black enamelled M.S. butt hinges with necessary screws.

Providing and fixing fly proof galvanised M.S. wire gauze to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete.With 2nd class teak wood beading 62 x 19 mm

Providing and fixing 35mm thick glazed shutters of Second class deodar wood for doors, windows and clerestory windows using 10 kg/ sqm (4 mm thick) glass panes including black enameled ISI marked M.S. butt hinges with necessary screws.

Providing and fixing 18 mm thick flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)

Providing and fixing aluminium tower bolts ISI marked (anodised anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing aluminium handles 125 mm ISI marked (anodised anodic coating not less than grade AC10 as per IS:1868)transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing aluminium sliding door bolts 300 x 16 mm ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc complete

Renewing glass panes, with wooden fillets wherever necessary Glass panes weighing 10 kg / sqm

Providing and fixing Ist quality ceramic glazed tiles conforming to IS : 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including all leads, lifts and carriage of material by MT / H.L.

Providing and fixing Ceramic glazed floor tiles 300 x 300 mm (thickness) to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO,ORIENT,SOMANY,KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1:4 (1 cement :4 coarse sand) including ;pointing the joints with white cement and matching pigment etc. complete including all leads, lifts and carriage of material by MT / H.L.

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid,10 litre low level white vitreous china flushing cistern and CP flush with fittings, C.I/M.S. brackets 40 mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required.W.C. pan with ISI marked white solid plastic seat and lid with white vitreous china flushing cistern & C.P. flush bend.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast iron P or S trap 10 litre low level P.V.C. flushing cistern including flush pipe pipe ( of approved make ) manually controlled device (handle lever) conforming to IS:7231,with all fittings and fixtures complete, including, cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C. pan of size 580 x 440 mm with integral type foot rests.

Providing and fixing wash basin White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with C.I/M.S. brackets,15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal Work-Exposed on wall.

25 mm dia nominal bore Medium

20 mm dia nominal bore Medium

Providing and fixing C.P brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931. 15 mm nominal bore complete job.

Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931. 15 mm nominal bore complete job.

Providing and fixing C.P brass long body bib cock of approved quality conforming to IS Standards and weighing not less than 690 gms complete job. 15 mm nominal bore

Providing and fixing P.V.C waste pipe for sink or wash basin including PVC waste fitting complete semi rigid pipe 32 mm dia

Providing and fixing unplasticised P.V.C. connection pipe with brass unions 15mm nominal bore

Providing and fixing Soap Dish of approved quality

Providing and fixing C.P brass shower rose with 15 or 20 mm inlet 150 mm diameter

Providing and placing on terrace (at all floor levels) polyethylene water storage tank I:S:I: 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank {Sintex, Elecroplast, Star, Lotus or equivalent having valid I : S: I license}

Providing and fixing PVC Floor trap of approved quality.

Providing and fixing 600 x450 mm bevelled Edge Mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with1:2:4 mix ( 1 cement :2 coarse sand 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement 4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement :3 coarse sand ) finished with floating coat of neat cement & making channels in cement concrete 1:2:4 ( 1 cement : 2 coasre sand :4 graded stone aggragate 20mm nominal size ) finished with a floating coat of neat cement complete as per standard design. Inside size 90 x 80 cm & 45cm deep including providing and fixing in position precast RCC manhole cover & frame of required shape and approved quanlity LD-2.5 rectangular shape 600x450 mm internal dimensions . With F.P.S bricks with class designation 75 & with crushed stone aggregate including all leads, lifts & carriage of material by MT / H.L.

Providing and fixing ball valve (brass) of approved quality complete, high or low pressure with plastic floats 20 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and fixing P.V.C Pipe 110 mm of approved quality

Providing and fixing P.V.C Pipe 75mm of approved quality

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In granting, frames, guard bar, ladders railing, brackets, gates & similar works.

White washing with lime to give an even shade. New Work (three or more coats)

Raghunandan Dubey

Shallu Devi