Construction of Panchayat Office Building at Mulliseval Village and Panchayat

Amount

Construction of New Panchayat Office Building

Earth work excavation for foundation in all classes of soils and sub soil to full depth except in hard rock requiring blasting but inclusive of shoring strutting if required for the sides of foundation.

Cement Concrete 1:4:8 mix using 40 mm HBG metal for foundaion including watering wherever necessary and laid in layers of not more than 15cm thick. Compacting etc., complete complying with standard specifications and as directed.

Supplying and filling with filling sand in layers not more than 15 cm thick ,well rammed, wattered and compacted etc, complete For Foundation

Supplying and filling with Gravel in layers not more than 15 cm thick including labour charges for Filling, Levelling, watering, well rammed and compacted etc., complete For Flooring Filling material

Brickwork in cement mortar 1:5 mix using country bricks of size 8 ¾” x 4 ¼" x 2 ¾” including cost and conveyance of all materials to site etc., complete.

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete.

Supplying and fabricating RTS / TMT STEEL rods including cutting, bending hooks, cranking, fabricating,assembling and laying in exact position,typing with softsteel wire 16 gauge ,etc., complete conforming to BIS std.

Supplying and erection Centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab, Lintel, Beam, Column, Sunshade including cost and coveyance of all materials to site and all other incidental charges etc complete., - Below GL

Supplying and erection Centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab, Lintel, Beam, Column, Sunshade including cost and coveyance of all materials to site and all other incidental charges etc complete., - Slab & Beam

Supplying and erection Centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab, Lintel, Beam, Column, Sunshade including cost and coveyance of all materials to site and all other incidental charges etc complete., - Column

Weathering Course with brick jelly lime concrete to 0.075m thick and Finishing the top of roof with one course of PRESSED TILES of size 23 cm X 23 cm X 2 cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with w

Paving the floor with Kotta Green tiles of size 60cm X 60cm X 1.8 to 2 cm thick in Cement mortar 1:3 etc., complete complying with standard specifications and as directed by the departmental officers.

Ceramic tiles flooring laying with new ceramic tiles of size 300x300x6 mm laid in C M 1:3 inculding cost of white cement and labour charges etc

Dadooing the walls with new Colour Glazed tiles of size 300 x120 x6 mm laid in CM 1:2 ,10 mm thick and pointig with white cement using 0.40 Kg/m2 including finishing the joint and pointing flush with ties surface

Plastering in cement mortar 1:5 mix, 12mm thick including cost and conveyance of all materials to work site from the approved sources and labour charges etc., complete.

Plastering in cement mortar 1:3 mix, 10mm thick including cost and conveyance of all materials to work site from the approved sources and labour charges etc., complete.

Cost and supply of Steel Door in size of 1.10m x 2.10m with best approved quality with standard specification and as directed by the departmental officer

Cost and supply of Steel Door in size of 1.00m x 2.10m with best approved quality with standard specification and as directed by the departmental officer

Cost and supply of Steel Door in size of 0.75m x 1.80m with best approved quality with standard specification and as directed by the departmental officer

Cost and supply of Steel Window in size of 1.20m x 1.30m with best approved quality with standard specification and as directed by the departmental officer

Cost and supply of Steel Window in size of 1.50m x 1.30m with best approved quality with standard specification and as directed by the departmental officer

Cost and supply of Rolling Shutter in size of 1.20m x 2.10m with best approved quality with standard specification and as directed by the departmental officer

Cost and supply of Grill Gate in size of 1.20m x 2.10m with best approved quality with standard specification and as directed by the departmental officer

Cost and supply of RCC Jolly in size of 0.60m x 0.45m with best approved quality with standard specification and as directed by the departmental officer

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Painting with approved quality ready mixed paint two coats including cost and conveyance of all materials to site, labour charges etc., complete for doors and windows.

Labour Charges for Fixing Steel Doors including all charges etc., complete

Labour Charges for Fixing Steel Windows including all charges etc., complete

Cost and supply of Indian Water Closet with best approved quality with standard specification and as directed by the departmental officer

Cost and supply of European Water Closet with best approved quality with standard specification and as directed by the departmental officer

Cost and supply of Wash Basin with best approved quality with standard specification and as directed by the departmental officer

25mm UPVC Pipe

Cost and supply of 500 Ltr Capacity HDPE Tank

Providing Electrification arrangement

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for Concealed PVC light / fan point (for electronic regulator) (5 points per coil) SD 22

Supply and fixing of Single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. SD 88

Supply and fixing of fancy glass shade and 11W CFL for BH point SD 80

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for incandescent lamp with 60 W bulb - SD 83 etc., complete

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for Concealed PVC light / fan point (for electronic regulator) (5 points per coil) SD 22

Supply and fixing of 1200 mm ( 48") AC Ceiling Fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for Concealed PVC Plug Point SD 36

Supply and run of 2x1.5 sq.mm (22/0.30) PVC insulated SC unsheathed Copper Conductor of 1100 V grade in 32mm dia GI Pipe (Class B) suitably bent at both ends with necessary angle iron upright and end supports for Mains SD 71

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for Service Connection Mains SD 66

Supply and fixing of 16A DP switch of 500V with matal clad with fuse and neutral (side handle) on suitable TW board with earth connection only SD 142

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit - SD 125.

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

S.Mariappan