Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.3 LAccepted-AOC SURVEY NO 93 392 PACHMARHI NEAR MILITARY HOSPITAL PAHMARHI HOSHANGABAD M P 461 881 | PACHMARHI | HOSHANGABAD | MADHYA PRADESH | 461881 | L1 | Accepted-AOC L1 | |
| 2 | L2₹7.6 L+₹6,566 (0.87%)Rejected-Finance 93 4 16A BLOCK NO 3 JAWAHAR CHOWK PACHMARHI MP 461881 | PACHMARHI | HOSHANGABAD | MADHYA PRADESH | 461881 | L2 | Rejected-Finance DUE TO L2 | |
| 3 | L3₹7.7 L+₹19,300 (2.56%)Rejected-Finance NEAR BUS STAND PACHMARHI MP PIN 461881 | PACHMARHI | HOSHANGABAD | MADHYA PRADESH | 461881 | L3 | Rejected-Finance DUE TO L3 | |
| 4 | L4₹8.0 L+₹42,630 (5.66%)Rejected-Finance | L4 | Rejected-Finance DUE TO L4 | |
| 5 | L5₹8.2 L+₹68,320 (9.07%)Rejected-Finance | L5 | Rejected-Finance DUE TO L5 |
Tender Value
Refer Docs
EMD Value
₹18,000
Closing Date
22 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE Indpt Pachmarhi
AGE Indpt Pachmarhi Dist- Hoshangabad (MP)-461881
COMPREHENSIVE MAINT OF MD ACCN AT AEC TRG COLLEGE AND CENTRE PACHMARHI
2024_MES_661696_1
AGE(I)/PACH/of 2024-25(8643/E8)
Open Tender
Civil Works
Item Rate
180 days
AGE Indpt Pachmarhi Dist- Hoshangabad (MP)-461881
E CLASS CATEGORY a(i)
7 documents required · 7 mandatory
₹500
AGE(I) PACHMARHI
₹18,000
1 Oct 2024
24 Jun 2024
24 Jul 2024
24 Jun 2024
22 Jul 2024
8 Jul 2024
Amount
Dismantling of floor, walls, roof tiles including bedding but backing and rubbish off permises all as specified.
Demolition of cement concrete in ground floor and paving n.exc 15 cm below or above ground level complete all as specfied and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) n.exc 15 cm ground level such as cooking plat form,chajjas etc complete all as specfied and directed.
Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specfied and directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specfied and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11sqm and not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specfied and directed.
M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 for laying of floor tiles complete all as specfied and directed.
M&L for glazed ceramics coloured tiles of size 450x300x7mm thick in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specfied and directed.
M&L for 10 mm thick randering in cement mortar 1 : 4 for fixing of wall complete all as specfied and directed.
M&L caramic tiles tiles10 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over complete all as specfied and directed.
M&L Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles complete all as specfied and directed.
M&L for 25mm thick cement concrete type B- 2, 1:2:4 (20mm graded aggregate) over sub base complete all as specfied and directed.
M&L for 40mm thick cement concrete type B- 2, 1:2:4 (20mm graded aggregate) over sub base complete all as specfied and directed.
M&L RCC 1:2:4 (using 20mm stone aggregate) Kitchen plat forms, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl necessary form work complete all as specified and directed
M&L for precast reinforced cement concrete (1:2:4) type B1 using 20mm graded stone aggregate for cover slabs of manholes, cover slab set in CM 1:4 side portion only with plain surfaces including necessary form work (reinforcement to be measured and paid separately) complete all as specified and as directed.
M&L for mild steel TMT bars as in reinforcement, 10mm dia and over cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified including dismantling plain or corrugated steel sheeting, any gauge, thickness, in roof covering complete all as specfied and directed.
S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws as specified including dismantling plain or corrugated steel sheeting, any gauge, thickness, in roof covering complete all as specfied and directed.
Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in ay position unframed work complete all as specfied and directed.
S&F for MS framed works as in trusses, purline, rafters, column square/rectangular, round or angle section, fixed with and including iron cleats or other connected plates flate iron wind ties etc incl bending of MS section as requried omplete all as specified and as directed.Fe-410 gd 250 complete all as specfied and directed.
M&L Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified
M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:6) all as specified
Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.
M&L 15 mm thick rendering on fair faces of bk/concrete surfaces in CM (1:6) finished even and smooth (without using extra cement ) on external surfaces complete all as specified.
Dismantling water storage tank exc 500 ltr but n ecx 1000 ltr complete all as specfied and directed.
Dismantling water storage tank exc 250 ltr but n ecx 500 ltr complete all as specfied and directed.
M&L of 1000 ltr three layer rotational moulded polye-thylene water storagetanks (cylindrical verticalwith closed top) hoistedand fixed in position all asspecified in SSR Part I complete all as specfied and directed.
M&L of 500 ltr three layer rotational moulded polye-thylene water storagetanks (cylindrical verticalwith closed top) hoistedand fixed in position all asspecified in SSR Part I complete all as specfied and directed.
S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 20mm-210 gms fixed in repairs complete all as specfied and directed.
S&F in repairs 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 20mm-210 gms fixed in repairs complete all as specfied and directed.
S&F in repairs ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 15mm dia iron pipe and fixed.(Minimum weight 210gm) complete all as specfied and directed.
Taking up or down steel tubing and connections with all fittings for 15 mm bore GI tubing complete all as specfied and directed.
Taking up or down steel tubing and connections with all fittings for 20 mm bore GI tubing complete all as specfied and directed.
S&F tubes 15mm bore medium grade galvansied with all fittings, fixed to walls and ceilings or laid in floors complete all as specfied and directed.
S&F tubes 20mm bore medium grade galvansied with all fittings, fixed to walls and ceilings or laid in floors complete all as specfied and directed.
S&F in repair 15 mm dia bib tap cast copper alloy (fency type), chromium plated, 'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specfied and directed.
S&F in repair pillar taps, 15 mm bore cast copper chromium plated fancy type screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as specfied and directed.
S&F in repair stop valve, cast copper alloy, fancy type,chromium plated with long shank and cup (Concealed type), screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe all as directed.
S&F in repair angle cock 15mm, cast copper alloy, fancy type,chromium plated with long shank and cup (Concealed type), screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe all as directed.
S&F fixing in repairs 125 mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specfied and directed.
S&F in repair vitreous china wash down water closet pan (pedestal pattern), coloured, with and including plastic water closet seat cover, coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, ( excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., complete all as specified and directed.
S&F in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm excluding taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed. Note : Rate quoted under this item deemed included fixing of taps, plug and chain and connecting up to supply pipes, wastes or traps etc complete all as specfied and directed.
S&F in repair vitreous china squating pan 'Orissa' pattern WC size 580x440 mm white with integral foot rest and trap and including connection to trap, fixing with existing waste pipe and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specfied and directed.
S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specfied and directed.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position in all respect as specifiedcomplete all as specfied and directed.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position in all respect as specifiedcomplete all as specfied and directed.
S&F PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed.
Fixing in repairs plastic sheet covers for water closet, black,closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device complete all as specfied and directed.
S&F25 mmGun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specfied and directed.
S&F in repair 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified.
S&F in repair Toilet paper holder with flat recessed type stainless steel with chromium plated (CP) brass screws and directed complete all as specified.
S&F in repair stainless steel soap dish,of standard size and shape complete all as specified.
S&F in repair stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx 330mmx160mm, including waste coupling & waste pipe complete all as specified and directed.
Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specfied and directed.
Taking down shutter of any description n exc 1 sqm each complete all as specfied and directed.
Taking down chowkat with shutter (without taking off shutter from the frame) area exc 1.5 sq.m but n.exc 4 Sqm each and removing from the site as directed by Engineer in charge complete all as specfied and directed.
Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) area n.exc 1.5 sqm each complete all as specfied and directed.
S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete all as specfied and directed.
S & F factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.
S&F Plain, solid, straight IInd class HW chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed for door/window.
S&F pressed steel frame size (105 x 60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified.
S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet, reinforced with MS square tube, fixing in same opening complete as all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed.
S&F 100 mm size MS butt hinges medium weight cold rolled fixed with screws to frame complete all as directed.
S&F 75 mm size MS butt hinges medium weight cold rolled fixed with screws to frame complete all as directed.
S&F200 mm long,aluminium,anodised, barrel tower bolts of extruded section all as directed.
S&F125 mm long,aluminium,anodised, barrel tower bolts of extruded section all as directed.
S&F 150 mm size aluminium handles,cast type,anodised all as directed.
S&F 125 mm size aluminium handles,cast type,anodised all as directed.
S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specfied and directed.
M&L cubboard shutter made of 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specfied and directed.
S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc all as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specifed
M & L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0 .5 sqm each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames complete all as specfied and directed.
S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and directed.
M&L Framed work such as grills, gratings, etc.. with ends of barsshouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming toto Fe.290.Gde-E-165 complete all as specfied and directed.
M&L type C1 Cement concrte 1:3:6 (20 mm graded graded graded aggregate) for insertion of hold fast, in MS door frame etc. incl. necessary form work etc complete all as specfied and directed.
M&L for complete removal of existing water proofing treatment from top of roof (flat or sloped) and canopies / chajjas of building including removal of debris out side MD land all as directed.
M&L Water proofing treatment Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 all as specified. on "Non approachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete
All as per item No 80 but applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces complete all as specified and directed.
All as per item No 80 but laying /unrolled over the bitumen coated surface, APP based polymeric membrane minimumweighing 3kg/sqm and minimum 3mm thickreinforced with polyster non wove fabric (wt. notless than 150 gms/sqm) land on primed surfaceby forced application complete all as specified with 100 mm over laps shall be sealed by flame as per manufacturers instruction complete all as specified and directed.
All as per item No 80 but applying two coats of bituminous aluminium paint including preparation complete all as specified and directed.
M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) in roof padding/kerbs/sunken slab etc complete all as spd and directed,
M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete.
M&L preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry and then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified.(IWPC will be paid separately)
Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specfied and directed.
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specfied and directed.
S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specfied and directed.
S&F 40 mm dia high density polyethylene pipes (HDPE) of pressurerating 6 kgf/cm2 fi xed complete to walls, ceilings or in floorscomplete all as specfied and directed.
M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed
M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed
S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia complete all as specfied and directed.
M/L PVC(SWR) bend of 75mm dia of any radius etc complete all as specified and directed
M/L PVC(SWR) Tee of 75mm dia etc complete all as specified and directed
M&L 110 mmPVC (SWR) vent cowl complete all as specfied and directed.
S&F PVC (SWR) multi floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete
M&L Stack clamps out of 50 mm by 5 mm flat ironand 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm pipe complete all as specfied and directed.
M&L Stack clamps out of 50 mm by 5 mm flat ironand 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm pipe complete all as specfied and directed.
Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specfied and directed.
M&L for suspended false ceilling comprising of 6mm thick non asbestos fibre cement bulding boards fixed or laid/inserted to GI frame work with screws over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
Dismanting stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specfied and directed.
M&L 18 mm thickGranite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of grannite complete complete all as specfied and directed.
M&L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specfied and directed.
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete all as specfied and directed.
M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specfied and directed.
M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specfied and directed.
M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint over a coat of primercomplete all as specfied and directed.
M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specfied and directed.
M&L for preparation of new decorated plastered or unplastered surfaces and providing two coat of white wash on wall including cornices complete all as specified and directed
Supply only liquid water proofing compound , ISI marked complete all as specfied and directed.
M&L for 75mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even & smooth without using extra cement, with and including joint filling (Size 30mm deep x 10mm wide) with sealing compound grade-A at 3m interwal and corner complete all as specified and directed.
DEEPAK JAISWAL (BID ID -3061911)
SUBIR KUMAR ROY (BID ID -3069645)
GHASI RAM SAHU (BID ID -3062302)
TANUJ CONST. CO. (BID ID -3062621)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .