Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance 03 SHIAH SHIAH BHUNTER NEENU KULLU HIMACHAL PRADESH 175141 | KULLU | HIMACHAL PRADESH | 175141 | Admitted-Finance |
Tender Value
₹12.7 L
EMD Value
₹25,340
Closing Date
23 Jul 2020, 4:00 pmClosed
Er. Balbir Singh
XEN Div. No.III Jammu
BOQ
2020_PWDJK_100300_1
e-NIT No.19 of 2020-21 Dated 13-07-2020
Open Tender
Civil Works
Item Rate
60 days
phallian
NIT
3 documents required · 3 mandatory
₹600
Yes
XEN PWD Const Div. No.III
₹25,340
Yes
6 Aug 2020
14 Jul 2020
24 Jul 2020
14 Jul 2020
23 Jul 2020
14 Jul 2020
Amount
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: of area beyond 3 sq. metres.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class deodar wood
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class deodar wood
Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S. wire gauze .of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows: lSI marked M.S. pressed but hinges bright finished butt hinges of required size with necessary screws Second class deodar wood
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand) including all leads, lifts and carriage (complete Job)
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead: 1:4:8 or leaner mix including all leads, lifts and carriage (complete Job)
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size) Nallah including all leads, lifts and carriage (complete Job)
Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 50 mmthick with 20mm nominal size stone aggregate. Crushed including all leads, lifts and carriage (complete Job)
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) Crushed including all leads, lifts and carriage (complete Job)
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm including all leads, lifts and carriage (complete Job)
Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete including all leads, lifts and carriage (complete Job)
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge including all leads, lifts and carriage (complete Job)
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm including all leads, lifts and carriage (complete Job)
Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope, relaying plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 ( 1 cement : 3 fine sand ) including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 metres lead. including all leads, lifts and carriage (complete Job)
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 1 Osqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: All kinds of soil including all leads, lifts and carriage (complete Job)
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40mm nominal size) Nallah including all leads, lifts and carriage (complete Job)
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) with 20% boulders including all leads, lifts and carriage (complete Job)
Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 fine sand) including all leads, lifts and carriage (complete Job)
Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) including all leads, lifts and carriage (complete Job)
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) including all leads, lifts and carriage (complete Job)
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars
Centering and shuttering including strutting, propping etc.and removal of form work for
Foundations, footings, bases of columns
Edges of slabs and breaks in floors and walls .Under 20cms wide
Suspended floors, roofs, landings, balconies and access platform
Finishing walls with acrylic smooth exterior paint of required shade on New work (two or more coats applied @ 1.67 litre/10sqm over and including base Coat of water proofing cement paint applied @ 2.20kg/10sqm)
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade Old work (one or more coats)
Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
Finishing walls with water proofing cement paint of required shade Old work (one or more coats) applied @2.20 kg/10sqm over priming coat of primer applied @ 0.80 litres/10 sqm complete including cost of priming coat
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
Supplying and fixing C.l. cover without frame for manholes: 500 mm diameter C.l. cover ( medium duty) the weight of the cover to be not less than 58 kg.
Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. nominal bore Medium
Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work)
15 mm dia. nominal bore
20 mm dia. nominal bore
Making connection of G.l. distribution branch with G.l. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore
Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: W.C. pan with lSI marked white solid plastic seat and lid.
Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China White Vitreous ChinaWash basin size 550x400 mm with a pair of 15 mm C. P. brass pillar taps
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
Providing and fixing P.V.C Sheet with necessary fittings on main gate.
Providing and fixing of HP Motor (boosting pump) of Kirloskar, sharp or equivalent make with necessary fittings etc. complete 1 HP Motor
Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].
Wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 Sq.mm. FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit with Piano type switch, phenolic laminated sheet, suitable size M.S box and earthing the point with 1.5 Sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required ( Group A)
Gulzar Singh
harbans Lal
Vandana Sharma
ANIL KUMAR PURI
VISHBINDER SHARMA
CHAMEL SINGH
Raj Kumar
VISHAL PROACH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .