REPAIR REPLACEMENT IN MAINTENANCE OF OLD CONVENTIONAL LIGHT FITTING INTO SMART LED LIGHT FITTING IN VARIOUS LOCATION OF MD AND OTM ACCN AT MH UNDER GE MH AND RH KHADKI

Amount

M & L for sub main wiring using two single core muiltistranded PVC insulated copper conductor FRLS cable of size 2.5 sqmm 1100 volt grade drawn suitable size of PVC conduit / PVC casing caping and accessories including 2.5 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious & making good the disturbed surfaces of wall/floor/ceiling to match with existing surface, including taking down the existing unserviceable submain wiring complete all as specified and directed by Engineer in Charge. Note : Two runs of 2.5 Sqmm cable, one run of 2.5 Sqmm earth cable and one run of PVC conduit / PVC casing caping shall be measured as one unit length.

M & L for sub main wiring using two single core muiltistranded PVC insulated copper conductor FRLS cable of size 4 sqmm 1100 volt grade drawn suitable size of PVC conduit/casing caping of suitable size of clamps and accessories including 4 sqmm PVC multi standard copper conductor FRLS cable in green colour for continious & making good the disturbed surfaces of wall/floor/ceiling to match with existing surface, including taking down the existing unserviceable submain wiring complete all as specified and directed by Engineer in Charge. Note : Two runs of 4 Sqmm cable, one run of 4 Sqmm earth cable and one run of PVC conduit casing caping shall be measured as one unit length.

Taking down old unserviceable Tube light fitting of any type and S & F wall mounted LED tube light fitting extruded aluminium housing high quality indoor batten LED tube 20 watt colour temperature 6500 K (4 feet long) lumen 2000 -3000, PF> 0.95, THD less 10% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge.

Taking down old unserviceable Tube light fitting of any type and S & F Suspended Architectural LED 40 Watt fitting with CRCA white powder Coated housing high quality indoor batten LED tube 40 watt colour temperature 5700 K (4 feet long) lumen 3700 -4100, PF> 0.95, THD less 10% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make Cat Part No CONSTA 1144LP40WLED857SPCWH or equivalent make given under list of make.

Taking down old unserviceable fitting, and S & F New genration energy saving environment friendly long life LED street light 25 Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seprate driver compartment with IP66 Protection and impact resistance of IK07 Building security lights.

Taking down old unserviceable Recess mounting fitting of any type including Aluminium false ceiling sheet cutting & S&F LED fitting square size 600 mm X 600 mm, 36 W -42 W LED fitting including, LED Lamp with powder coated CRCA housing and polycarbonate diffuser, LED Fixture system wattage 36 -42 w,140V -260 V AC ,System lumen out put min 3600 lumen in 36 w and 4200 lumen in 42 w with 5700-6500 K CCT with PF>0.95 CRI>=80 and with <=10 % THD, with Min 2.5 KV surge protection in Built with IP 20 protection complete as per site requirement as directed by Engr-in-charge.complete LED fixture with BIS Mark and Registration No.

Taking down old unserviceable S & F plano surface 4x1 G2 version, 36Wat Recess mounting LED Light fitting including suspended chain arrangement with necessary fixture, LED Lamp with CRCA housing white powder coated finish and polycarbonate diffuser, LED Fixture system wattage 36 Watt, 140V -270 V AC ,System with lumen out put min 3600 lumen in 36 Watt with 5700 K CCT with PF>0.95 CRI>=80 and with <=10 % THD, with Min 2.5 KV surge protection in built complete LED fixture with BIS Mark and Registration No. Make Cat Part No PLANOSUR4X1PLS36LED857G2S or equivalent make given under list of make.

Taking down old unserviceable Tube light fitting of any type and S & F wall mounted LED Bed side light fitting extruded Polycarbonate housing high quality indoor batten LED tube 20 watt colour temperature 4000 K (2 feet long) lumen 1700-2000, PF> 0.90, THD less 10% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make : HAVELLS Cat Part No LHLDESAARANB020 or equivalent make given under list of make.

S & F in repair bracket for mounting building security light made out of 40 mm dia medium grade GI pipe bend in angle with holding MS clamps two Nos each bracket of size 25x3 mm including screw/Nut Bolts etc for fixing complete all as specified and directed by Engr in charge.

S & F in repair 100 Watt LED Flood light energy saving environment friendly and robust high bay LED luminaire with high efficiency with toughened glass LED fitting Pressure die cast aluminium alloy for housing (heat sink) for effective thermal management with LED PC lens LED High Bay LED system wattage consist of 100 Watt ,140-260 V AC, System Lumen Out put min 10000-12000 Lumen in 100 w with 5700-6500 K CCT with PF >0.95 CRI >=70 and with <=10 % THD, with Min 2.5 KV Surge protection in Built and LED high Light and BIS R Registration number and necessary brackets, including provision of clamps of suitable size all as specified and diretced.

ONKAR ELECTRIC AND GENERAL STORE

Yashwanti electricals

BRICKS ON CLOUD INFRA

UNIQUE ENGINEERS

M/s ASPIRE ENGINEERING ENTERPRISES

SHREE SHIV ELECTRICAL

ANUSHKA BUILDERS

SHREE VAIBHAV ELECTRICALS