Construction of New control room 30V DC to 110V DC control supply in Attur 110/22KVSS

Amount

Clearing Scrub & Light jungle and levelling the undulated area using JCB and disposing off to a place at-least 1km away from the site as directed by the Engineer in charge including all labour charges, lead, lift, T&Ps etc., complete.

Earth work excavation for foundation and depositing on bank with initial lead of 10m & initial lift of 2m in all types of soils such as earth, SDR, medium rock, dense medium rock not requiring blasting as directed by the Engineer in charge including all labour charges, lead, lift, T&Ps etc., complete.

Earth work excavation for foundation and depositing on bank with initial lead of 10m & initial lift of 2m by removing hard rock by wedging, chiseling and trimming to proper shape where blasting is prohibited as directed by the Engineer in charge including all labour charges, lead, lift, T&Ps etc., complete.

Supplying and filling M sand well watered and consolidated in foundation and basement in layers complying with standard specification and as directed by the Engineer in charge including cost of all materials, all labour charges, lead, lift, T&Ps etc., complete.

Providing P.C.C 1:4:8 using 40mm HBG metal for foundation and Basement as directed by the Engineer in charge including cost of all materials, labour charges, curing, T&P, laed, lift, etc., complete.

Providing P.C.C 1:2:4 using 20mm HBG metal for foundation as directed by the Engineer in charge including cost of all materials, labour charges, curing, T&P, laed, lift, etc., complete.

Providing P.C.C 1:2:4 using 20mm HBG metal for foundation, Basement, cable trench wall, plinth protection wall, retaining wall, etc.,with shuttering as directed by the Engineer in charge including cost of all materials, labour charges, curing, T&P, laed, lift, etc., complete.

Providing R.C.C 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Columns as directed by the Engineer in charge including cost of cement, all materials, labour, curing, vibration charges, shuttering charges, T&P's, lead, lift, etc., complete (But excluding cost of steel reinforcement).

Providing R.C.C 1:1½:3 mix using 12 to 20mm HBG machine crushed metal for Grade beams as directed by the Engineer in charge including cost of cement, all materials, labour, curing, vibration charges, shuttering charges, T&P's, lead, lift, etc., complete (But excluding cost of steel reinforcement).

Providing R.C.C 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Plinth beams as directed by the Engineer in charge including cost of cement, all materials, labour, curing, vibration charges, shuttering charges, T&P's, lead, lift, etc., complete (But excluding cost of steel reinforcement).

Filling the basement upto floor level using gravel well watered and consolidated in foundation and basement in layers complying with standard specification and as directed by the Engineer in charge including cost of all materials, all labour charges, lead, lift, T&Ps etc., complete.

Providing anti-termite treatment (Pre-Construction) for the Foundation and Ground floor of the Building as per IS 6313 (Part II) including cost of all materials, labour charges, lead, lift, T&Ps etc., complete.

Brick work in CM 1:4 using Fly ash Bricks of size 23x11x7cm for basement and super structure as directed by the Engineer in charge including cost of all materials, scaffolding, labour charges, curing, lead, lift, T&P, etc., complete.

Providing R.C.C 1:1½:3 mix using 12 to 20mm HBG machine crushed metal for Sill beams as directed by the Engineer in charge including cost of cement, all materials, labour, curing, vibration charges, shuttering charges, T&P's, lead, lift, etc., complete (But excluding cost of steel reinforcement).

Providing R.C.C 1:1½:3 mix using 12 to 20mm HBG machine crushed metal for lintel beams as directed by the Engineer in charge including cost of cement, all materials, labour, curing, vibration charges, shuttering charges, T&P's, lead, lift, etc., complete (But excluding cost of steel reinforcement).

Providing R.C.C 1:1½:3 mix using 12 to 20mm HBG machine crushed metal for continuous sunshade as directed by the Engineer in charge including cost of cement, all materials, labour, curing, vibration charges, shuttering charges, T&P's, lead, lift, etc., complete (But excluding cost of steel reinforcement).

Providing R.C.C 1:1½:3 mix using 12 to 20mm HBG machine crushed metal for roof beams as directed by the Engineer in charge including cost of cement, all materials, labour, curing, vibration charges, shuttering charges, T&P's, lead, lift, etc., complete (But excluding cost of steel reinforcement).

Providing R.C.C 1:1½:3 mix using 12 to 20mm HBG machine crushed metal for roof slab as directed by the Engineer in charge including cost of cement, all materials, labour, curing, vibration charges, shuttering charges, T&P's, lead, lift, etc., complete (But excluding cost of steel reinforcement).

Providing steel reinforcement for all RCC works including cutting, bending, binding, tying and placing in position as directed by the Engineer in charge including cost of steel, galvanized binding wire, lead, lift, T&Ps, etc., complete.

Plastering in CM 1:3, 10mm thick for all ceiling surfaces, Sunshades, etc., as directed by the Engineer in charge including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&Ps, etc., complete.

Plastering in CM 1:5, 12mm thick for interior surfaces of all walls as directed by the Engineer in charge i including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&P etc., complete.

Plastering in CM 1:5, 20mm thick in two layers (first layer of 12mm thick and second layer 8mm thick) for exterior surfaces of all walls as directed by the Engineer in charge including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&Ps, etc., complete.

Providing projected border of 12mm thick / groove border of required width for good elevation in CM 1:3 as directed by the Engineer in charge including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&Ps, etc., complete.

Supplying applying with two coats of wall putty as directed by the Engineer in charge including preparation of surface, curing, cost of all materials, scaffolding charges, labour charges, lead, lift, T&Ps, etc., complete.

Painting two coats over newly plastered inner wall surface with ready mixed plastic emulsion paint of first quality and of approved colour over a primer coat as directed by the Engineer in charge including cost of all materials, scaffolding charges, labour charges, thorough scrapping, clean removal of dirt, curing, lead, lift, T&Ps, etc., complete.

Outer colour washing with two coats using ready mixed Weather Proof Exterior Emulsion (First quality - Apex ultima or its equivalent) of approved quality and colour over a coat of exterior emulsion water based primer exterior surfaces including through scrapping, clean removal of dirt, cost of all materials, scaffolding, labour, lead, lift, T&Ps, etc., complete and including necessary crack filling paste, putty where ever required.

Providing, fabricating and fixing in postion MS Grills for windows as directed by the Engineer in charge including cost of fabrication, transporting, lifting and fixing in walls rigidly with concrete PCC 1:2:4, cost of all materials, labour charges, lead, lift, T&P, one coat of red oxide primer, etc., complete.

Painting the steel work with two coats of approved quality & colour Satin / Matt finish enamel paint over a coat of primer of red oxide as directed by the Engineer in charge including cost of all materials, brushes, lead, lift, P&Ps, etc., complete.

Supplying and fixing FRP Door Sutter (Double shutter) with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails, etc., with following fixtures like (i) 300mm long hold fasts of size 35x35x5mm-6Nos, (ii) Aldrop 250mm long-2Nos, (iii) Handle 200mm long-2 Nos (Front & Back side), (vi) Tower bolts 300x12mm-2Nos, (v) Butt hinges with nylon washers (125x30mm)-8Nos, (vii) Nylon Bush-2Nos, (viii) Door stopers with rubber bush including cost of transporting, lifting and fixing, embedding the hold fasts in walls rigidly with concrete PCC 1:2:4, cost of all materials, labour charges, lead, lift, T&P, etc., complete with standard specification and as directed by the departmental officer.

Supplying and fixing UPVC (Un-Plastrcized polyvinyl chioride) windows of casement type (open) from the profile the size of outer frame 60mm x58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm .the EPDM rubber (block colour)covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should have key lockable action, security protective hinges strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames with standard specification and as directed by the departmental officer.

Providing floor finish with double charged vitrified tiles of size 600x600x8mm of approved make, colour and pattern over 20mm thick Cement mortar 1:3 bedding and pointing with same coloured suitable filler material as directed by the Enginer incharge including cutting chase in walls wherever required, cost of all materials, labour charges, lead, lift, curing, T&Ps, etc., complete.

Providing floor finish with anti-skid tiles of approved make, colour and quality and of size 305x305x6mm over 20mm thick cement mortar 1:3 bedding and pointing with same coloured suitable filler material as directed by the Enginer incharge cutting chase in walls wherever required, cost of all materials, labour charges, lead, lift, curing, T&Ps, etc., complete.

Dadooing the walls with Joint free ceramic tiles of approved make, colour, pattern, quality and size over 10mm thick CM 1:3 bedding and pointing with same coloured cement as directed by the Enginer incharge at site including cutting chase in walls wherever required, finishing neat cost of all materials, labour, lead, lift, curing, T&Ps, etc., complete.

Providing and fixing granite stone slab engraved with month & year of construction and fixed on the wall as directed by the Enguineer incharge including cost of all materials, fixing charges, painting, etc., complete.

Supply and fixng of TNEB Meter Board suitable for 3 Phases 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 200A fuse units (500V) 1 No. Neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete including cost of all materials such as cables, pipes, labour, transport, T&Ps, etc, complete and as directed by the Engineer incharge at site.

Supply and run of 4 x 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains concealed in wall and ceiling with continuous earthing for providing 6 Sq.mm multistand PVC wireand making good of the concealed portion with suitable colour including cost of all materials such as cables, pipes, labour, transport, T&Ps, etc, complete and as directed by the Engineer incharge at site.

Supplying and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door (metal) with 40A 4 pole isolator (MCB), 40A 4 pole ELCB 30MA as incoming and 12 Nos. 6A to 32A single pole MCB as out going in flush with wall and making good of the concelled portion with earth connection. The MCBDB, ELCB and MCBs shall be with ISI mark (Legrand (MDS) / Hager (L&T) / equivalent make) including cost of all materials such as cables, pipes, labour, transport, T&Ps, etc, complete and as directed by the Engineer incharge at site.

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling for lights and fans with PVC accessories in flush with wall with metal switch box and 5A Modular switchs with continuous earth wire connection of 14 SWG TC wire, making good of concealed portion with suitable color of concealed light point / fan point with 5A Modular switch, ceiling rose, including cost of all materials such as cables, pipes, labour, transport, T&Ps, etc, complete and as directed by the Engineer incharge at site.

Supplying and fixing 375mm (15”) sweep (Heavy duty) confirming to IS (Bajaj / Crompton / Almonad / equivalent make) AC Exhaust fan with MS/Fibre louvers shutters arrangements of approved ISI quality complete with necessary wall opening and making good of the wall including cost of all materials such as cables, pipes, labour, transport, T&Ps, etc, complete and as directed by the Engineer incharge at site.

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with Metal switch box with 5A 5 pin Modular type non interlocking CS plug with continuous earthing for providing 14 SWG TC wire for making good of concealed portion with suitable color for concealed PVC plug point including cost of all materials such as cables, pipes, labour, transport, T&Ps, etc, complete and as directed by the Engineer incharge at site.

Wiring with 2 x 4 sq.mm (56/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with Metal switch box with 15A 5 pin Modular type non interlocking CS plug with continuous earthing for providing 14 SWG TC wire for making good of concealed portion with suitable color for concealed PVC plug point including cost of all materials such as cables, pipes, labour, transport, T&Ps, etc, complete and as directed by the Engineer incharge at site.

Supply and fixing of 20W 4 feet LED fitting with LED of Philips / equivalent make on wall / ceiling as directed by the Engineer incharge at site including cost of all materials, lead, lift, T&P, etc., complete.

Supply and fixing of 30 watts LED street light fitting with LED of Phillips / equivalent make as directed by the Engineer incharge at site including cost of all materials, GI pipes, lead, lift, T&P, etc., complete.

Supply and fixing of 1200mm (48") sweep AC ceiling fan confirming to ISS 374 /1979 (Bajaj / Crompton / Usha / equivalent make) complete with stepped electronic 300w 2 Module regulator, 1m down rod on the existing clamp as directed by the Engineer incharge at site including cost of all materials, lead, lift, T&P, etc., complete.

Wiring with Triple core 1 x 0.5 sqmm PVC insulated wire for unarmoured LAN cable (Cat-6) line in suitable PVC rigid pipe concealed in wall and ceiling for LAN plug with PVC accessories inflush with wall with Metal box with sheet cover for LAN male-female pin as directed by the Engineer incharge including cost of all materials and fixing, making good of the concealed portion with suitable colour for concealed PVC pins, cost towards supply of all materials such as PVC pipe, wires, pins, etc., complete.

Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp as directed by the Engineer incharge including cost of all materials, leat, lift, T&Ps, etc., complete.

vetrivel constructions