PROVISION OF FOUNTAIN AND SUBMERSIBLE PUMP SET AT CGDHQ UNDER GE (I) CAMPBELL BAY

Amount

Surface excavation not exceeding 15 cm deep and getting out in any type of soil all as specified and directed.

Excavating over areas in any type of soil n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc.and getting out in any type of soil all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded aggregate as in foundation, filling and mass concrete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns raft and raft beams sides and soffits of foundation and plinth beam and similar work vertical or to batter all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, column and stanchions for rough finished surfaces of concrete square, Circular rectangular on plan or polygonal all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete flat all as specified and directed.

M&L for Reinforced cement concrete M30 (Design Mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete all as specified and directed.

M&L for Reinforced cement concrete M30 (Design Mix) using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts all as specified and directed.

M&L for Reinforced cement concrete M30 (Design Mix) using 20 mm graded stone aggregate as in beams, bands, cantilevers, bressummers, lintels over 1.5m span, all as specified and directed.

M&L for Rendering 10 mm thick in cement plaster 1:4 on brick masonary or concrete rough finished surfaces as backing coat all as specified and directed.

M&L for 15 mm thick in cement morter 1:4 on fair faces of concrete surfaces as Screed bed or bedding layer in floors finishes mixed with WPC as per manufacturer's instructions complete all as specified and directed. (Supply only of WPC shall be measured and paid separately).

Supply only of Integral waterproofing compound of approved make all as specified and directed.

M&L for Mild steel TMT reinforcement Bars of 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clip all as specified and directed.

M&L for Mild steel TMT reinforcement bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clip all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed..

M&L for nonskid coloured Ceramic joint free tiles (Matt finish) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile. all as specified and directed.

M&Lfor coloured glazed ceramic tiles 300 x 200 x 6-7mm/300mm x 450mm x 6-7mm thick in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match and all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks of PCC 1:3:6 type C-1 using 20 mm graded aggregate , exc. 10 cm in width and setting in mortar 1:4, complete all as specified and directed.

M&L granite (of any type)work (table rubbed and polished) 18 mm thick in steps,jambs,pillars,cooking platforms and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite complete as specified and directed.

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar workcomplete as specified and directed.

S&F for 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.of following sizes complete all as specified and directed :- (a) 20 mm dia

(b) 25 mm dia

M&L for preparation of newly plastered wall surfaces and applying two coats of Acrylic weather proof exterior paint (Make: APPEX of Asian Paints / All Guard from Berger Paints or equivalent) including and over one coat of white cement as primer complete all as specified and directed.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth and gettingout inany type of soil for erection for RCC poles laying of LT UG cables complete all as specified and directed by Engineer-in-charge

Supply and lay of LT UG cable PVC insulated, PVC sheathed steel armoured 1100 volts grade multistrandard aluminium conductor of size 2 core 10 Sqmm complete all as specified and direcetd by Engineer-in-Charge.

M&L for HDPE (DWP) pipe of size 50 mm outer dia and 38mm inner dia confirming to IS:14930 Part-II including necessary pipe fittings laid in trenches for cable protection complete all as specified and directed.

M&L monoblock Pump 1 HP with control Panel Single Phase, Multicolor, speed : 2800 rpm, Head 10-49 mtr, Dimensions 30x9x5cm, Phase- Single Phase, Delivery Size - 32mm, Weith 15 Kg, Borewell Size- 4 inch, complete all as specified and directed

S&F sheet metal enclosure weather proof alongwith canopy for housing of SPN DB and fixing through angle iron frame including necessary grouting & foundations complete all as specified and as directed.

S&F sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar SPN 8 Way complete all as specified and as directed.

S&F MCB SPN 32 Amp 240 volts .

S&F MCB single pole 5 to 32 Amps .

Supply & fix integral of not less than 10 Watt Aluminium LED Fountain Lights, IP 65 protection, Beam Angle 180 Degree acessories of colour complete all as specified and as directed. Make: Phillips / Bajaj / Wipro / Syska / Jaguar

Supply & fix integral of not less than 20 Watt Aluminium LED Fountain Lights, IP 65 protection, Beam Angle 180 Degree acessories of colour complete with lamp all as specified and as directed. Make: Phillips / Bajaj / Wipro / Syska / Jaguar

M & L For Earthing complete with galvanised Mild steel earth plate electrode size 600 x600x6 mm thick buried directly in ground (preferably in vertical position earth pit not less than 2.25 mtr below normal ground level with top edge of the earth plate not less than 1.5 m (BGL) connected to galvanised iron earth wire 4 mm dia by means bolts, nuts check nuts including PCC pit in RCC 1:2:4 type B-I, 20 mm bore medium grade, GI water tubing fixed with CI funnel wire mesh 15 mm light grade for protection pipe including charcoal common salt complete all as specified in EP No 3 of SSR -2009 Part-I connected to test complete all as specified.

Supply and fix GI tubing medium grade of size 32 mm with all tees, bends and all accessories all as specified and directed

Supply and Install Submersible pump set 25 HP, copper wounded as per actual design requirement complete suitable for 3 phase, 415+- 5% volts, 50 cycles, AC of suitable horse power including automatic submersible starter and 40 mtrs submersible cable complete including all necessary fittings/fixtures all as specified and as directed. Make : SIEMENS/ABB/CROMPTON GREAVES/KIRLOSKAR ELECTRIC/ CRI

S&F Cast Iron sluice Valve 80 mmPN 1.6 Flanged conforming to IS 14846, Hand wheel operated, stainless steel stem with gun metal parts, Flanged, drilled to IS 1538 Non rising steem PN 1.0 shell test presure 1.5 Mpa Hyd , Seat Test pressuer 1.0 Mpa Hyd . As specified and directed by Engr-n-charge.

Supplying, laying or fixing in replacement, GI water tubing, medium grade, of size 80 mm confirming to IS-1239 [Part-1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, etc laid in tenches / floors or fixed to walls / ceiling / roof etc including testing and taking up / down existing unserviceable GI tubing with fittings / connections, carefully from trenches / celiling /walls/roofs etc complete all as specified and as directed :-

Supply & fix 2.5 Sqmm flat sheathed twin core submersible cable for connecting pump with DB complete all as specified & directed

ASHOK BISWAS

bansal construction

KCM BUILDERS & CONSTRUCTIONS INDIA PVT LTD

P NAIDU