REPAIR /MAINT OF GP TOILETS AND ALLIED SERVICES IN OLD CAMP AREA AND OTHER AREA UNDER AGE B/R-II GE BABINA

Amount

Demolition of Brickwork or stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles etc complete.

M&L brick work with fly ash 'bricks (FASB) confirming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc.complete all as specified.

M&L renderig/screeding 15mm thick cment mortar 1:6 on fair faces of brick or concrete surface of wall rendering is to be finished even smooth with out using extra cement complete all as directed by the Engineer - In- Charge.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as directed by the Engineer - In- Charge.

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as directed by the Engineer - In- Charge.

Demolition of cement concrete (unreinfored )in ground floor and paving n,exc 15cm thickness below or above ground level)complete all as specified and as directed

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in sub base, floor laid in alternate panel with surface finished even and smooth with using extra cement all as directed and specified.

M&L Glass dividing strips , 3mm thick and 28 mm width as complete all as directed by the Engineer - In- Charge.

M&L for Hardcore of gauge n exc. 63 mm of broken bricks, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as directed by the Engineer - In- Charge.

M&L 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection path laid in panel surface finished even and fair complete all as specified and as directed

Demolition of RCC water storage tank of size exc. 1200x1200x1000 mm but n.exc 1200x1800x1500mm on roof, floor, staging complete and the scrap should be removing to distance of 50m where complete all as directed by the Engineer - In- Charge.

S& F 500 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of tank complete all as specified and as directed by the Engineer-In- Charge.

S&F 1000 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of tank complete all as specified and as directed by the Engineer-In- Charge.

Taking down 15 mm bore steel tubing and connection including cleaning and removal to store etc complete all as specified and directed.

Taking down 20 mm bore steel tubing and connection including cleaning and or removal to store etc complete all as specified and directed.

S&F 15 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and directed.

S&F 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and directed.

S&F in repair 20mm bore dia ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in newly taken tank (minimum weight 20mm - 210 gms) complete all as specified

S&F in repair 20mm Gun metal globe or gate vlve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs 15mm bore bib taps cast copper alloy Chromium plated with crutch handle screwed with long body for iron pipe or for brass ferrule complete all as specified and as directed

S&F in repairs 15mm bore bib taps fency type cast copper alloy Chromium plated with crutch handle screwed with long body for iron pipe or for brass ferrule complete all as specified and as directed

S&F in repairs 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/) complete all as directed by the Engineer - In- Charge.

S&F in repair 15 mm stop valve cast copper alloy screwed down high pressure with crutch handle (concealed type) screwed both ends for iron pipes or for union and fixed complete all as specified and as directed.

S&F in repairs 15mm dia bore Fency type cast copper alloy chromium plated angle cock with long shank & cup complete all as specified and as directed.

S&F in repair two way angle valves with wall flange 15mm bore, fancy type, quarter turn, cast copper alloy, chromium plated with long shank and cup, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

S&F in repaire Vitreous China wash down water closet pan (pedestal pattern) (EWC), white including connections to drain (or outgoing pipe) and to flushing pipe, with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts anti-syphonage pipe including seat cover white etc. complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items

S & F in repair Vitreous China bowl urinal flat back small ( SPECIAL ) of Hindware with grating and union for discharge pipe, push tap (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and directed .

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed.

S&F in repairs 15mm dia bore pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and flynust, screwed for iron pipe and fixed complete all as specified and as directed

S&F brass CP Pillar mixer 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixed complete all as directed by the Engineer - In- Charge.

S&F in repairs brass CP wall mixer 15mm dia bore with telephone shower without crutch (with bush and piston divertor fitting) complete all as specified and as directed by the Engr-in-Charge.

S&F in repair 32 mm dia bore of PVC waste pipe for kitchen sink and wash hand basin fixed in repair complete all as directed by the Engineer - In- Charge.

S&F in repair brass chromium plated shower rose 75mm size with long body fancy type including fixing to steel pipe or union complete all as specified and as directed

Taking down chowkhats or frames with shutter (with out taking off shutter from the frame) n.exc 1.5 sqm each complete all as specified and as directed

Taking down chowkhats or frames with shutter (with out taking off shutter from the frame) n.exc 1.5 sqm each cobut exc. 1.5 sqm and n exc 4sqm each complete all as specified and as directed

Taking down wooden shutters of any description exc 1 Sqm but n. exc 2 sqm each complete all as specified and as directed.

Taking down wooden shutters of any description n. exc 1 sqm complete all as specified and as directed.

S&F for 125 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom. PCC shall be provided in hollow frame in same rates.

S&F 105 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate.

S&F solid PVC door frames of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a VC sheet strip of 20mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rails & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame weled/ sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing

S&F 30mm thick 2nd class hard wood Glazed and skeleton shutters (factory made), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed by the Engr-in-Charge.

S&F for 30mm thick locally made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed by the Engr-in-Charge.

S&F 100 mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and as directed by the Engr-in-Charge.

S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by the Engr-in-Charge.

S&F 150 mm size Aluminium handles, cast type, anodised and fixed of approved make & ISI marked complete all as specified and as directed by the Engr-in-Charge.

M&L for 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by the Engr-in-Charge.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by the Engr-in-Charge.

S&F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed

S&F in repair galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed

S&F mild steel work as in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F powder coated aluminium frame straight for doors/windows/partitions using aluminium section of minimum size 100mmx44mmx2.00mm thick, 31mmx12mmx3.00mm thick & 49.91mmx44.45mm x1.3mm thick and etc. fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size complete all as specified and directed

M&L for powder coated anodised aluminium door shutter fabricated out of aluminium section 1.60mm thick two side openable with top rail and stiles of size 83x44mm, lock and bottom rail of size 100x44mm, (two panels) with and including 5mm thick plain colour PVC sheet (Rajshree make) and 5mm thick ordinary sheet glass duly covered with tinted solar control film, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, anodised aluminium fittings such as hinges (B-21) handles (disc type), tower bolts (200mm long), locking device with duplicate keys complete all as specified and directed.

S&F Powder coated aluminium sliding windows (three track frame of weight not less than 1.17Kg/Rm) with one fly proof shutters and two glazed shutter having top rail of section 41mmx20mm x1.6mm thick, bottom rail of section 41x20x1.6mm thick, vertical style of section 38x20x1.6mm thick including necessery jointing cleats ,glazing clips, rubber packing ,snap beading, screws handle and locking system etc, fitted including usingg standard aluminium section including necessery fittings and fixtures complete all as specified and directed. Note : (i) All rate i.e track frme, shutter, glazing cleat, rubber gasket etc is deemed included in quoted rates. (ii) Wiremes & glass pane will be measured & paid separately with respective items.

S&F Powder coating aluminium window and ventilator shutters with frame of weight not less than 1.17Kg/Rm with sash bar half portion openable for ventilator purpose including fixing of wiremesh outside with festening arrangement, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

S&F 5mm thick 3 ply Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces fixed with screws to timber frame work or aluminium saction complete all as specified and as directed by the Engr-in-Charge.

S&F sheet glass 4 to 5mm thick ordinary quality and glazing with wooden beads or oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as dirrected

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed by the Engr-in-Charge.

S&F Aluminium die cast body door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg and fixed in repair complete all as specified and as directed by the Engr-in-Charge.

Dismantling wall and ceiling boards (fibre, pump, insulation etc,) or insulation boards of any thickness including cover fillets complete all as specified and as directed by the Engr-in-Charge.

M&L for aluminium anodised snap grid frame work of the following (a) Main Tee section 36.5x25x1.4mm size (wt not less than 0.24Kg/RM) (b) Section alongwith wall angle of size 40x25x2mm size (wt not less than 0.36Kg/RM) (c) Cross Tee section 23.5x26.4x1.4mm size (wt not less than 0.191Kg/RM) (d) Snap grid shall be fixed to G.I Flat 40 x 3mm supporting hangers consisting of 4mm dia G.I rod n.exc 1.20m length with J bolts nuts and washer etc as per manufacture instructions & complete all as directed.

M&L for 4mm thick high pressure steam cured non asbestos fiber cement design board of size 600mm x 600mm as in ceiling complete all as specified and diredted.

M&L for rendering 15mm thick in cement mortar 1:3 mixed with water proofing compound as per manufacturer instructions surfaces finished even and smooth without using extra cement complete all as specified and directed(Note :- WPC shall be measured and paid seprately)

M&L for applying two coats of OMNIPLAS EP-101 epoxy compound manufactured by M/S OM AGRO INDUSTRIES PLASTIC Pvt Ltd. Bombay or equivalent as approved by GE in proportions as per manufacturer instruction on complete surfaces of floor and wall of sunken portion complete all as specified and directed.

M&L for plain cement concrete 1:5:10 type E-2 (using 40mm brick course agg) as in filling & mass concrete in floor and sunken portion complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.5mm stone aggregate in sub base of floor complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store complete all as specified and as directed by the Engr-in-Charge.

M&L Glazed ceramic coloured tiles (Premium quality) (300X200mm) X 6mm thick as in wall, dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge.

M&L for Vitrified ceramic tiles 600x600x8-10mm thick, light coloured as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed layer in CM 1:6 laid over and including 25mm thick PCC 1:2:4 type B0 using 12.5mm stone aggregate sub floor complete all as specified and directed.

M&L Vitrified ceramic tiles size 600x600x9-10mm thick, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square or rectangular ) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by the Engr-in-Charge.

M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square or rectangular ) area of each tile exc. 0.11 sqm but not exc 0.18 sqm over and including 10mm thick rendering in cement mortar 1:4 in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed by the Engr-in-Charge.

M&L for machine cut Kota stone slab in floor 20-25 mm thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 as base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and nosing complete all as specified and directed.

M&L for machine cut Kota stone slab in skirting/vertical surfaces 20 to 25 mm thick laid over and including 10 mm thick rendering in cement mortar 1:4 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and nosing complete all as specified and directed.

M&L for granite of any type in full length for kitchen plate form, gate pillar & like 20 mm thick machine cut bedded and jointed with grey cement sluury and pointed with white cement with admixture of pigment to match the shade over 20 mm thick screed bed (1:6) including grinding and polishing complete all as specified and as directed by the Engr-in-Charge.

Taking down shutters of any description exc 1 sqm but n.exc 2 Sqm each removal to store and Refixing in same opening including cutting to size and fittings with making good surfaces conditions and etc complete all as specified and as directed.

S&F in repair PVC floor trap size 75mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed

Hacking out old broken glass in any thickness size quality or description from wooden frames complete all as specified and as directed by the Engr-in-Charge.

S&F sheet glass 3mm thick ordinary quality and glazing with wooden beads or oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as dirrected

S&F in repair 3mm thick firured glass, pin headed type and glazing with oil putty in squares n. exc 0.5 sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and as directed by the Engr-in-Charge.

S&F as in replacement stainless steel (conforming to AISI-304 grade) kitchen sink with drain board of overall size 915mm x 460mm and bowl size 410mm x 352mmx 178mm depth or equivalent made of 1mm thick stainless steel sheet with 32mm bore CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe(heavy duty) 90 cm long, and bedded in cement mortar and fixed on CP cantilever brackets, complete all as specified and as directed by the Engr-in-Charge.

S&F in repair stainless steel kitchen rack plate rack over all size 900mmx900mm made out of 0.63mm thick stainless steel sheet complete all as specified and as directed

S&F as in repair CP corner glass shelf with bracket fixed with screws complete all as specified and as directed by Engineer-in-Charge.

S&F in repair brass chromium plated tubler towel rail 20mm dia D type, 60cm long between flanges complete all as specified and as dirceted

S&F stainless steel curtain rod 25mm dia grading H-304, with fancy type knob on both ends and brackets complete all as specified and directed

S&F as in repair hand shower (health faucet) (ABS Chrome palted) with 8mm dia, 1m long, flexible tube with wall hook complete all as specified and as directed by Engineer-in-Charge.

S&F in repair cast copper alloy chromium plated jet spray for EWC complete all as specified and as directed.

S&F 18mm thick Celuka ply of grade 1 quality of one side pre-laminated & other side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet /shutters incl taking down old wooden particle boards complete all as per specifications and as directed by the Engr-in-Charge. Make : Rajshri/ Black Cobra etc or any other make as given in Appendix B to PS.

S&F 12mm thick Rajshri Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make wall mounted kitchen cabinet sides back & pull out shelves inside the cabinets complete all as per specifications and as directed. Make : Rajshri/ Black Cobra etc or any other make as given in Appendix B to PS.

S&F Continuous (piano) hinges, mild steel bright finish ele ctrogalvanised 20mm width of flap etc complete all as per specifications and as directed.

S&F Hasp & staple safety type aluminium anodized with mild steel hing pin incl bolt to hing plate and fixed with screws 100mm size etc complete all as per specifications and as directed.

S&F auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters, complete all as per specifications and as directed.

S&F stainless steel handles 100mm size for kitchen cabinet shutters complete all as per specifications and as directed.

M/s Ravi Traders (BID ID -3056141)

M/S M S Constructions (BID ID -3056086)

M/s KGN Builders (BID ID -3064702)