Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹37.7 L+₹1.3 L (3.66%)Rejected-Finance | L2 | Rejected-Finance BEING NOT L1 |
| Sl No | Description | Qty | Unit | GUND PARAG JAGANNATH L2 | M/s.TIRUPATI BUILDERS L1 |
|---|---|---|---|---|---|
| 1.00 | M&L for complete removal of existing treatment of wall / ceiling / chajja by scrapping with mechanical trucare wall sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete by skilled labour complete all as directed.
Note : After Completion of Removal existing surface Approved of Engr -in- charge and GE shall be Taken before appling further finshing .
NOTE FOR ALL PAINITNG AND WATER PROOFING ITEMS :-
The following precautionary measures shall be ensured by the contractor before and during execution of the work :-
(i) All the painting works and water proofing works shall be got executed through original material manufacturing company or their authorised applicators as approved by GE
(ii) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit.
(iii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers.
(iv) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery. | 7,600 | Sqm | 17 ₹1,29,200 Lowest | 20 ₹1,52,000 |
| 2.00 | M&L for preparation of old/ untreated plastered surfaces of walls/ceiling/chajja and applying two coats of weather proof exterior emulsion paint over and including a coat of priming coat of exterior cement base primer as per manufacturer's instruction complete all as specified and directed.
Note :
(i) The paining shall be done with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats of paint.
(ii) Rate quoted shall be deemed to be included for scaffolding up to 15 mtr height building. | 3,600 | Sqm | 98 ₹3,52,800 Lowest | 100 ₹3,60,000 |
| 3.00 | M&L for preparation of old/ untreated plastered surfaces of walls/ceiling and applying two coats of oil bound distemper over and including a coat of cement base primer of same manufacturer over and including sand papering 1mm thick wallcare putty in layesr as per manufacturer's instructions complete all as specified and directed.
Note :
(i) Painting shall be done using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper/ primer should be able to spray in hard to reach areas and penetration of distemper on the surface | 4,000 | Sqm | 74 ₹2,96,000 | 69 ₹2,76,000 Lowest |
| 4.00 | Material and labour for preparation of old plastered or unplastered surfaces of wall/ceiling/chajjas and applying one coat of weather proof exterior emulsion paint complete all as specified and as directed.
Note :- Rate quoted shall be deemed to be included for scaffolding up to 15 mtr height building. | 9,000 | Sqm | 58 ₹5,22,000 Lowest | 69 ₹6,21,000 |
| 5.00 | Material and labour for preparation of old plastered or unplastered surfaces of wall/ceiling/chajjas and applying one coat of cement based paint complete all as specified and as directed.
Note :- Rate quoted shall be deemed to be included for scaffolding up to 15 mtr height building. | 1,000 | Sqm | 26 ₹26,000 | 23 ₹23,000 Lowest |
| 6.00 | Material and labour for preparation of old plastered or unplastered surfaces of wall and applying one coat of oil bound emulsion distemper of approved tint complete all as specified and as directed. | 4,000 | Sqm | 23 ₹92,000 Lowest | 23 ₹92,000 Lowest |
| 7.00 | Material and labour for preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. | 1,000 | Sqm | 27 ₹27,000 Lowest | 29 ₹29,000 |
| 8.00 | Material and labour for preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. | 500 | Sqm | 27 ₹13,500 Lowest | 29 ₹14,500 |
| 9.00 | M & L for preparation of old Cheakered tiles or paver block and applying two coat of apex tiles guard paint complete all as specified and directed | 250 | Sqm | 56 ₹14,000 Lowest | 90 ₹22,500 |
| 10.00 | M&L for rendering 10mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6,including taking down old cement plaster.complete all as specified and directed by Engineer-in-Charge. | 75 | Sqm | 250 ₹18,750 Lowest | 300 ₹22,500 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
19 Jul 2025, 6:00 pmClosed
GE AF OJHAR
GE AF OJHAR
SMART PERIODICAL SERVICES IN TECHNICAL AREA AND MAINT/REPAIR OF MES QTR,INSTALLATION, OTM ACCN OF MES AT AF STN OJHAR
2025_MES_714682_1
8320/E8
Open Tender
Civil Works
Item Rate
335 days
OJHAR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF OJHAR
₹98,000
17 Dec 2025
16 Jun 2025
21 Jul 2025
17 Jun 2025
19 Jul 2025
30 Jun 2025
Amount
M&L for complete removal of existing treatment of wall / ceiling / chajja by scrapping with mechanical trucare wall sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete by skilled labour complete all as directed. Note : After Completion of Removal existing surface Approved of Engr -in- charge and GE shall be Taken before appling further finshing . NOTE FOR ALL PAINITNG AND WATER PROOFING ITEMS :- The following precautionary measures shall be ensured by the contractor before and during execution of the work :- (i) All the painting works and water proofing works shall be got executed through original material manufacturing company or their authorised applicators as approved by GE (ii) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (iii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iv) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery.
M&L for preparation of old/ untreated plastered surfaces of walls/ceiling/chajja and applying two coats of weather proof exterior emulsion paint over and including a coat of priming coat of exterior cement base primer as per manufacturer's instruction complete all as specified and directed. Note : (i) The paining shall be done with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats of paint. (ii) Rate quoted shall be deemed to be included for scaffolding up to 15 mtr height building.
M&L for preparation of old/ untreated plastered surfaces of walls/ceiling and applying two coats of oil bound distemper over and including a coat of cement base primer of same manufacturer over and including sand papering 1mm thick wallcare putty in layesr as per manufacturer's instructions complete all as specified and directed. Note : (i) Painting shall be done using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper/ primer should be able to spray in hard to reach areas and penetration of distemper on the surface
Material and labour for preparation of old plastered or unplastered surfaces of wall/ceiling/chajjas and applying one coat of weather proof exterior emulsion paint complete all as specified and as directed. Note :- Rate quoted shall be deemed to be included for scaffolding up to 15 mtr height building.
Material and labour for preparation of old plastered or unplastered surfaces of wall/ceiling/chajjas and applying one coat of cement based paint complete all as specified and as directed. Note :- Rate quoted shall be deemed to be included for scaffolding up to 15 mtr height building.
Material and labour for preparation of old plastered or unplastered surfaces of wall and applying one coat of oil bound emulsion distemper of approved tint complete all as specified and as directed.
Material and labour for preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour for preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M & L for preparation of old Cheakered tiles or paver block and applying two coat of apex tiles guard paint complete all as specified and directed
M&L for rendering 10mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6,including taking down old cement plaster.complete all as specified and directed by Engineer-in-Charge.
Material and labour for 15mm thick cemet plalster in CM 1:4 over wall / concrete surfaces finished even and smooth without using extra cement,including taking down old cement plaster, complete all as specified and directed by Engineer-in-Charge.
M&L for 5mm thick rendering on concrete surface of ceiling in CM 1:3 and rendering is to be finished even and smooth with out using extra cement,including taking down old cement plaster.complete all as specified and directed by Engineer-in-Charge.
M & L for Preparation of old painted surfaces of steel and iron of any description, over 10 cm in width or girth, not otherwise described include for all necessary preparatory work required and applying one coat of Aluminium paint complete all as specified and directed by Engineer in charge.
M & L for Writing Letters or figures (Block,Roman,Italic or Indian) n.exc 30cm high complete all as specified and as directed by Engineer in charge
M&L for preparation of old painted brick, stone, concrete or plastered surfaces of road side kerbs and applying one coat of synthetic enamel paint in two different colours pattern as directed, complete all as specified
M & L for applying 1.5 mm thick wall care putty on wall/ Ceiling sufaces complete all as specified and as directed by Engr-in-Charge .
Taking down chowkats or frames/ window frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each compete all as specified as directed by Engineer -in -charge
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc. 4 Sqm each compete all as specified as directed by Engineer -in -charge .
M & L for forming jambs in Cement concrete 1:4 to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complet all as specified and as directed by Engr-in- Charge. .
M & L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with Green marble shade complete all as specified and as directed by Engr-in-Charge.
S & F Pre- painted Steel Windows/ Luavers ( Base Steel as per IS 513 of 0.58mm thick "D" quality galvanised as per IS 277 with zink of 120GSM). Primer coated with epoxy primer of 5-7 microns thick,finished painted with a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer . Section for outer frame should be 72 x 55mm , centre mullions shouuld be of 72 x 50mm, section for fixed glass beading should be of 12 x12mm and section for shutter should be of 52x 25mm . Outer frame of mullion sections to have rebate for glazed shutter, fly mesh and 20mm provision for gaurd bars/grill fly mesh shutter section should be of 20x 40mm. The sections are to be cut to length mitre jjoint with corner brackets. Centre mullions to be fixed with mullions cap. shutter brackets with inbuilt PVC lip to be fixed in a way that t he lip overlap the shutter corners and are not exposed. Elixir or equivalent stay, handles 02 nos of heavey duty stain-less steel pivot hinges shall be provided per shutter. The window should be panelled with 4mm thick plain float glass an d S.S. mesh for fly mesh Shutter (304 grade)rubber gasket are provided all around the glass. The above frames should br fixed to the concrete / masonary wall by means of self-expanding , screw including 10mm square gaurd bar with with 6"(152.4 mm) pitch, complete fpr finished item of work including of all taxes. ( Make :-Elixir Met Pvt Ltd./ A2Z infra soulutions/Tata pravesh and any approved Make.)
Demolition of cement concrete of any description and in any position complete all as specified and as directed by Engineer -in-Charge. Note : Rate shall include removing demolished material from outside MoD land. Complete all as specified and as directed by Engineer-in-Charge
M & L for cement concrte type C2 (1:3:6) (40 mm graded broken stone aggregate) 75mm thick as in plinth protection including necessary form work complete all as specified and as directed by Engr-in-Charge.
M & L for forming contraction (Dummy) joints 65mm deep and 10mm wide filled with sealing compound grade 'B' complete all as specified and as direced By Engr-in-Charge.
Taking down carefully existing bitumen tarfelt including plastering upto 15mm thick cleaning the surface and make free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated and removing all foreign materials / Bitumenous primer completely , cleaning and washing the existing surface of roof/slab, terraces including flashings and junctions of parapets/Curb walls etc and as directed by Engineer-in-charge. Note : (i) Contractor will not thrown the debris and taking down material from roof will make suitable arrangement to get down the material from roof. (ii) If taking down of plaster is exceeding 15mm than PCC and plaster both shall be measured under ser item No 20 below (iv) Removing of the rubbish to a distance outside MoD land at own arrangement of Contractor.
Demolition of cement concrete of any description and in any postion not potherwoise specifcally provided for including PCC for existing roof as a padding concerete PCC tileswith screed bed and removing including tree roots, mud etc and removing demolisedmaterials from out side MD land complete all as specified and as directed by Enginner -in- Charge.
M&L providing cement slurry @ 3Kg per sqm on existing roof surface before laying PCC/ Plaster complete all as specified and as directed by Engineer-in-Charge..
M&L for providing ement concrete 1:2:4 Type B0 (Using 12.5mm graded stone aggregate) as in bed plate/roof kerb/PCC padding and haunching etec all as specified and directed by Engr in Charge Note : PCC shall be laid in slope and thickness shall be averege (minimum average thickness 25 or as per site requirement for maintain the slope) as per site including filling in depression by providing concrete bench marks for maintaining th perfect slope to drain out the rain water as directed by Engr-in-Charge.
M&L for rendering 10mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 0.12 ltr per bag of cement or as per manufacturer instruction and finishing the surfaces even and smooth without using extra cement. Note:- (Supply only water proofing compound shall be measured and paid separately).Complete all as specified and directed by Engineer-in-charge.
Supply only integral water proofing compound
M&L for cleaning the newly plastered surfaces throughly with wire brushes and providing water proofing treatment all as given here in after (a) Bituminous primer @ 0.3lit per Sqm conforming to IS-3384-1986 (b) 3 mm thick APP polymer modified moply FP of M/S TEXSA Ltd or M/S STP Ltd or ASIAN PAINTS of Hydrostop Tiki Dan of M/s Tikki tar Ltd with minimum wt 3.0 Kg per square metre membrane (one layer) laid by torch application method. (c ) Applying two coat of bituminous based aluminium paint @ 0.20 Kg in two coats (total in two coats) per square metre over membrane. Complete all as specified and directed by Engineer-in-charge. (d) The overlaps of APP shall be SSR part 1 and APP shall be laid by expert/ skilled workers only, bitumen based aluminious paint applied by brushes only.
Dismantiling of or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern foor conerings including ridge and wall cladding all as specified and as directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed by Engr-in-Charge,
Supply & Fix Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick multirib TM profile of any colour having tensile of 550 Mpa yeald strenth as in roof cobering/cladding to wall fixed with self tapping screws of any approved pattern compltete all as specified and as directed by Engr-in-Charge.
S & F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engineer -in-Charge.
Material and labour for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base for levelling etc complete all as specified and as directed.
M & L for Non - skid Ceramic tiles 600mm x 600mm 7 to 8 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in cement mortar (1:4) including dismantling complete all as specified and as directed. by Engr-in-Charge
GUND PARAG JAGANNATH (BID ID -3350055)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .