Shifting and Formation of office rooms for Townplanning section and Executive engineer Ele & Ws in Davanagere City Corporation office.

TOWN PLANNING BUILDING

S S Angle cock with wall flange - Premium (Vol-2 P.NO A-36 SI.NO.810)

Providing and fixing Bib cock Two way with wall flange made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class A)Premium (Vol-II Material Componen...

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet an...

Providing and fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top and bottom rails, covered with hea...

Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners and jointed 2 No.s of 150mm long bra...

Earth work excavation by manual means In all kinds of soils Depth upto 1.5 m for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all...

Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1colon4 (1 cement colon 4 coarse sand) including cost of all ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C...

CONNECTION PIPE uPVC Pipes 65 mm nominal dia. (PWD SR 2023-24 Vol II SI.No.988 P.No. A-42)

110 mm dia PVC Bend (PWD SR 2023-24 Vol V I.No.10.11.8 P.No. 118)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia (PWD SR 2023-24 Vol II I.No.14.28.1.1 P.No. 136)

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per ...

Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g e (PWD SR 2023-24 Vol II I.No.14.36.1 P.No. 137)

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having therma stability for hot and cold water supply, including all cpvc plain and brass threaded fittings, i/c fixing the pipes with...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS colon 15622 of approved make in colours such as White...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade colonTwo coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drop...

painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade colonTwo coats on new work over an under coat of suitable shade with ordinary p...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing colon Rectan...

Providing and fixing PVC (S.W.R) P Trap 10cms x 10cms with all fitting arrangements and all necessary accessories complete (I.No. 13.6 pg no 127) As per SR 2023-24

110 mm dia PVC Tee (PWD SR 2023-24 Vol V I.No.10.10.8 P.No. 117)

Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proof...

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete inc...

Removing the mosaic tiles in patches in area exceeding 10 tiles and not exceeding 5 sqm including removing old tiles preparing surfaces and laying or setting new or old tiles complete including cost ...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix colon1colon4 (1 cementcolon 4 fine sand) to brick masonry including rounding off corners wherever required smooth r...

Providing Brick work with Non Modular fly ash bricks conforming to IScolon12894, class designation 5.0 average compressive strength in super structure above plinth level up to floor I leve...

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IScolon 15477, in average 3mm thickness. (SR...

Providing and laying cinder concrete in cement 1colon15 ( 1 cement colon 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, la...

Providing and fixing C.P. brass bib cock of approved quality conforming to IScolon8931 (I.No. 13.12 pg no 119) As per SR 2023-24

Removing the old paint from steel and / or other metal surface with paint remover of approved brand / manufacturer cleaning and making surface even including cost of material, labour, complete as per ...

Removing the old paint from wood and / or wood based surface with blow lamp and making surface even including cost of materials, labour, complete as per specifications (Vol-2 P.No 208 I.NO.20.58)

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking to the appropriate disposal area as per direction of Engineer-in-charge. (Vol-II M...

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal ...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at 0.90L/10 m² over an under coat of primer applied at 0.80 L/10 m² of approved brand and manufacture incl...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90L/10 m² over an under coat of primer applied at0.75 L/10 m² of approved brand and manufacture to give an...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade colonTwo coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drop...

Repairs to existing aluminium partition including glass,board, lock, handle, beading etc cost of all material,labour, complete as per specifications. (Vol-2 P.No 207 I.NO.20.109)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make co...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IScolon 12823 Grade l Type ll, in panelling fixed in aluminum...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and ...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and ...