Supply, Installation, Testing and Commissioning of Octagonal high mast light pole, high mast flood lights along with allied accessories at Snow Clearance Control Room Bandipora.

Providing and fitting of octagonal high mast light pole of approved make, fabricated from high-tensile steel, hot-dip galvanized as per relevant IS specifications, having height of not less than 11 meters, including base plate, anchor bolts, head frame of MS fitted at top of the pole which can hold 03 Nos. horizantal Flood lights of not less than 200 Watts, complete in all respects. This job includes transportation of the pole to SCCR Mangnipora (District Bandipora)

Excavation and RCC Foundation for High Mast Pole: Excavation for RCC foundation of size 3’-0” below ground level and 2’-0” above ground level with 2’-6” side dimensions, including, providing, laying and casting RCC foundation in cement concrete mix ratio 1:2:4 with reinforcement using 12 mm TMT bars, placed both horizontally and vertically with spacing not exceeding 8 inches, forming a cuboidal reinforcement cage, complete with shuttering, centering, compaction, vibration, curing, and all allied works. The item further includes fixing and grouting of anchor bolts, erection and vertical alignment of the high mast pole using crane, internal cabling, and earthing with Copper earth electrode (or as per OEM recommendations), complete in all respects. Concrete Volume: 01 cubic meter. TMT Steel reinforcement bars weight: 60 Kgs

SITC of 200 Watt LED Flood Light (of reputed make) to be installed on the erected hightmast pole, having the following specifications: a) Rated Power: 200 Watt b) Input Voltage: 220–240 V AC, 50 Hz (operational range 140–275 V AC) c) Power Factor: ≥ 0.9 d) Colour Temperature: 5500 - 6500 K (Cool White) e) Luminous Flux: ≥ 20,000 lumens f) Colour Rendering Index (CRI): ≥ 80 g) Beam Angle: Wide flood distribution (approx. 120°) h) Operating Temperature: –10°C to +45°C i) Surge Protection: Inbuilt surge protection minimum 4 kV The LED luminaire shall be made of fire-retardant, UV-stabilized plastic housing, suitable for outdoor applications, with a minimum Ingress Protection rating of IP66. The luminaire shall be complete with an integral constant-current LED driver. The fixture shall be securely mounted on the pole arm, properly aligned, and electrically connected to the existing power supply, including all necessary wiring, connectors, clamps, and accessories, complete in all respects.

Providing and fitting of 2.5 sq.mm copper wire for service connection. The wire shall be of Flame Retardant (FR), multi-strand, single-core, unsheathed flexible copper conductor, PVC insulated, suitable for operation at voltage grade up to and including 1100 V. The cable shall be manufactured using advanced polymer technology, having high oxygen and temperature index to restrict the spread of fire and ensure enhanced safety. The wiring shall be carried out using FR copper wires of reputed make, properly enclosed in rigid PVC conduits wherever required, with all joints and terminations made using suitable lugs, insulation tape, and accessories as per standard electrical practice.

Supply, Installation, Testing, and Commissioning of 1 KVA fully automatic voltage stabilizer having an input voltage range of 90–240 V. The stabilizer shall be installed and properly connected to the electrical circuit at the location specified by the Site Incharge, ensuring safe and reliable operation.

Providing and fitting of 16A 2 Pole MCB with protective enclosure of reputed make.

Providing and fitting of 63A 2 Pole MCB with protective enclosure of reputed make.