NER-LJN Div- Provision of Passenger toilet with Divyangjan on platform at BNZ-both side at PF- 2/3 (02 Nos.), LNJ- both side at PF-6 (02 Nos.), DAL- LC side PF-4 (01Nos.), LC-ASH side PF-1 (01 Nos.) & both side PF-4 ( 02 nos.), GTNR- Both side PF-1 & 2/3 (04 nos.), PF-4/5 & 6- BNZ side (02 nos.) & BLP- PF-2- one side (01 nos.). Total = 15 nos. toilet.

Item Breakup - A-CPWD-DSR-2021

88 mm, weighing not less than 170 gms 17.74 Providing and fixing PTMT shelf 440 mm long, Each 45 607.05 27317.25 124 mm width and 36 mm height of 60 approved quality and colour, weighing not less than 300 gms. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 18.7 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall 61 18.7.1 15 mm nominal dia Pipes Metre 1200 255.9 307080 62 18.7.2 20 mm nominal dia Pipes Metre 525 325.1 170677.5 63 18.7.3 25 mm nominal dia Pipes Metre 450 408.55 183847.5 64 18.7.4 32 mm nominal dia Pipes Metre 750 500.95 375712.5 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and 18.10 making good the walls etc.-Internal work - Exposed on wall 65 18.10.1 15 mm dia nominal bore Metre 450 304.15 136867.5 66 18.10.2 20 mm dia nominal bore Metre 300 373.35 112005 67 18.10.3 25 mm dia nominal bore Metre 750 491.2 368400 Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc.-External work 68 18.12.5 40 mm dia nominal bore Metre 2250 558.35 1256287.5 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 69 18.15.1 15 mm nominal bore Each 225 303.85 68366.25 70 18.15.2 20 mm nominal bore Each 120 327.95 39354 Providing and fixing brass stop cock of 18.16 approved quality : 71 18.16.2 20 mm nominal bore Each 75 327.95 24596.25 Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : LUCKNOW-NER-DIVISION-ENGINEERING/NORTH EASTERN RLY 72 18.18.2 20 mm nominal bore Each 75 397.45 29808.75 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet : 73 18.22.1 100 mm diameter Each 45 166.35 7485.75 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal 18.32 size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 18.32.1 With common burnt clay F.P.S.(non modular) Each 30 1712.15 51364.5 74 bricks of class designation 7.5 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 18.33 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.33.1 With common burnt clay F.P.S.(non modular) Each 30 10102.5 303075 75 bricks of class designation 7.5 18.48 Providing and placing on terrace (at all floor Litre 30000 9.7 291000 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 76 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Providing and fixing PTMT grating of 18.58 approved quality and colour. 18.58.1 Circular type 77 18.58.1.2 125 mm nominal dia with 25 mm waste hole Each 225 45.25 10181.25 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture 19.1 of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 78 19.1.1 100 mm diameter Metre 300 375.75 112725 79 19.1.2 150 mm diameter Metre 150 591.4 88710 22.0 WATER PROOFING Grading roof for water proofing treatment 22.14 with 80 22.14.3 Cement mortar 1:4 (1cement : 4 coarse sand) cum 26.1 13378.15 349169.72 LUCKNOW-NER-DIVISION-ENGINEERING/NORTH EASTERN RLY Total 27577460.24

A-CPWD-DSR-2021