REPAIR TO HARD STANDING, PATHWAY, FENCING GATE AND ROOF TREATMENT WALL SEEPAGE/LEAKAGE CHAJJA, JOINERY AND SMART PERIODICAL SERVICES JOINERY, PLUMBING AND OTHER THAN OFFICER MD ACCN AT AF STN BKT

Amount

Complete removal or existing treatment on wall/roof projections including facia cornices etc by scrapping with mechanical sander (having mechanical vaccum machine, scruber) with sanding pad adjustable size according to high of building of appropriate grit to make surface clean free from dust loose paint etc by skilled labour complete all as specified and directed. Note: Contractor shall ensured that all deployed labour's on operations, like painting & misc building repairs & maintenance work, electricity subjected repairs & instrallation and its testing related have to maintained according to CA & related regulated other agency norms as followed, No extra demand will be occured on department on this account.

M &L for Old plaster surfaces of finishing walls with paint of required shade applying Two or more coats of 100% Premium acrylic emulsion paint of having VOC less than 50 gm/litre and UV resistace as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm over including 1mm thick wall care putty over Old surfaces complete all as specified and directed. Note: Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) Make:- Asian Paint Apex ultima/Berger weather coat long life 10/Nerolac Excel everlast or equivalent.

M&L for preparation of old plastered surfaces of wall including cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds and efflorescent salt and trading and greasy spots and applying one coat of white wash by air less spray machine (Machanical means) of any shade and with appropiate binder fevicol or equivalent complete all as specified and directed

Ditto complete all as per item No-3 here in before but one coat of white wash on ceiling complete all as specified and directed

M&L for preparation of old distempered surfaces of wall by washing rubbing down and stopping of old distempered surface of wall including cornices etc and also 1mm thick wall putty as required for levelling and applying one coat of primer as required and one coat of oil bound distemper (Oil emulsion any tint) on wall by air less spray machine (Machanical means) complete all as specified and directed (Make:- M/s Asian Paints tractor synthetic distemper/nerolac beuty smooth finish/berger beuty clean or equivalent.)

M&L for preparation of old plastered surfaces of walls by washing, rubbing down and stopping of distemper and painted surfaces & applying two coats of distemper oil emulsion over a thin layer of wall care putty complete all as specified and directed (Make:- M/s Asian Paints tractor synthetic distemper/nerolac beuty smooth finish/berger beuty clean or equivalent.)

M&L for preparation of old painted surface of wood or wood based material of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enemel paint complete all as specified (Make:- M/s Asian paints gattu, Nerolac high-glass finish, Berger butterfly or equivalent. )

M&L for preparation of old painted steel surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed Make:- M/s Asian paints gattu, Nerolac high-glass finish, Berger butterfly or equivalent.

M&L for preparation of old plastered or unplastered decorated surface of walls and applying one coat of cement base paint by air less spray machine (Machanical means) of any colour complete all as specified and directed (Make :- Berger derocem extra/ asian paints decora/ Nerolac or equivalent).

Ditto complete all as per item No-09 here in before but applying two coats of cement base paint, complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls of any description over 10cm width or girth and applying one coats of weather coat by air less spray machine (Machanical means)any colour complete all as specified and directed Make:- Asian Paint Apex ultima/Berger weather coat long life 10/Nerolac Excel everlast or equivalent. Note:- Contractor shall conduct a sample execution prior to in original surface applying according to prevailing colour code schemes in the presence of all executives & maintenaned the same in your custody for only painting items.

Demolition of brick work or stone/boulder masonary built in cement mortar including all quions, arches, pillers etc but excluding ashlar facings dressed stone work and pre-cast concrete articles complete all as specified and directed

Supply only Integral water proofing compound as specified and directed.

M&L for Brick work with old size fly ash bricks straight or curved on plan exc 6m nean radius and setting in cement mortar (1:6) complete all as specified and directed.

M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer by air less spray machine (Machanical means) of any colour complete all as specified and directed (Make :- Snowcem India or equivalent).

M&L for preparation of newly plastered surfaces of wall and applying mm thick wall puttay by mechanical means two coats of oil emulsion distemper by air less spray machine (Machanical means) complete all as specified and directed (Make:- M/s Asian Paints tractor synthetic distemper/nerolac beuty smooth finish/berger beuty clean or equivalent.)

M&L for 15mm thick rendering in patches on fair faces of brick work in cement mortar 1:6 and finished even and smooth without using extra cement area exceeding 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed

Ditto complete all as per item No- 17 here in before but area n.exc 1.00 Sqm each complete all as specified and directed

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm high with thick paint, complete all as specified and directed.

M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc with thick paint, complete all as specified and directed

Hacking out old broken glass up to 9.50 m height (any thickness size, quality or description) from steel frames, glazed with putty or fixed with beads complete all as specified and directed

S&F 3mm thick plain sheet glass ordinary quality and glazing with oil putty upto 9.50M height in steel shutter in square n.exc 0.50 Sqm in each pane or any steel frame including glazing clips, complete all as specified and directed (Make:- Modi Guord/Saint-gobin or equivalent).

S&F 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed (Make:- Modi Guord/Saint-gobin or equivalent).

Dismantling of floor hearth and wall tiling incl mortar bedding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

S&F for non-skid/anty skid ceramic any coloured and pattern tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm n.exc 0.38 sqm, in floor etc over 15mm thick screed bed in CM 1:6 and set and jointed in neat cement slurry and pointed in white cement with pigment to match the coloured cement to match the surface complete all as specified (Make:- M/s Kajaria/Orient Bell/Johnson or equivalent).

S&F for non-skid/anti skid ceramic any designer coloured and pattern tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm n.exc 0.38 sqm, in verticle surfaces as in skirting and dado set and jointing neat cement slurry, over 10mm thick rendering in cement mortar (1:4) and pointed, in white cement with pigment to match the colour of tiles complete all as specified and directed (Make:- M/s Kajaria/Orient Bell/Johnson or equivalent).

M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window, cills, cooking plateforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

M&L Vitrified ceramic joint free tiles 8 to 10mm thick light shade double charge (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed (Make:- M/s Kajaria/Orient Bell/Johnson or equivalent).

Ditto all as per item No 28 above but dark shade as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, set and jointed in neat white or coloured cement to match the surfaces of tiles all as specified and directed (Make:- M/s Kajaria/Orient Bell/Johnson or equivalent).

Demolition of cement concrete in ground floor and paving n.exc 15 cm thickness (Below or above GL)

M&L cement concrete type B-2, 1:2:4 using (40mm graded stone aggregate) Nominal mix in pavement/ hardstanding, thickness of concrete not less than 150mm.

Finishing concrete surfaces of road using broom finish

M&L forming expansion joints 12mm thick filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade Afor thickness of concrete slab of 150mm thick.

Forming construction joint 30 mm deep and 10 mm wide filled with sealing compound grade 'A'.

M&L PCC 1:3:6 type C-2 (40 mm graded stone agg) as in plinth protection finished even & smooth without using of extra cement 75 mm thick.

Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

M&L for Chequred tiles with glossy finished 300mm x 300mm x 20mm thick, heavy duty tiles ; laid over and including 25 mm thick PCC 1:2:4 Type B1 using 20mm graded stone aggregate and 15 mm thick screed bed in cement mortar 1:6 set jointed and pointed in neat cement slurry with white/grey cement mixed with admixture or pigment to match the shade in floors, and cut and polished complete all as specified and directed. (Make - Kajaria, Orient bell, Johson or equivalent)

Supply & filling of baby chips of 6mm grade 40mm thick including spreading and levelling complete.

Supply & Laying for 60mm thickness, M-35 Grade coloural glss finish rubber moulded machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 all as specified and as directed

Precast cement concrete kerb stone in Type B1(1:2:4) 20mm graded aggregate complete all as specified and directed.

M&L for two coats of cement base any shade in 1 mm thick putty paint over a coat ofalkali-resistant priming paint by airless spray machine including preparation of surfaces complete all as specified and as directed

Supplying and laying 50mm dia PVC pipe (LDPE) of rating 6kg/cm2 for Weep holes.

M&L for PCC type C-2 (1:3:6) using 40 mm graded stone aggregate as in surface channels and drain, mass concrete and filling complete all as specified and directed.

M&L for PCC type B-1 (1:2:4) using 20 mm graded stone aggregate in surface channels, drain and finished complete all as specified and directed.

Demolition of Bricks (laid flat or on edge) as in channels , drain work built in cement mortar complete all as directed.

M&L for bricks pointed in cement mortor 1:3, sub class 'B' old size bricks , laid flat as in drains complete all as specified and directed.

Ditto as item 46 but except bricks complete all as specified and directed.

M&L for bricks pointed in cement mortor 1:3, sub class 'B' old size bricks , laid on edge in drains complete all as specified and directed.

Ditto as item 48 but except bricks complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar of any specification and in any position complete all as specified.

M&L for brick work with fly ash brick (using old size bricks)straight or curved on plain exc 6m mean radious built in cm 1:4 complete all as specified and directed.

Taking down cement plaster on brick walls etc including racking out joints, hacking for keys in scrubbing down and washing with water etc complete all as specified and directed

M&L for 15mm thcik rendering on fair faces of brick work in cement mortar 1:6 and finished even and smooth without using extra cement Mechanical Means all as specified and directed (Note:- Below 10 Sqm Qty be excuted throuth conventional mathod).

M&L for 15mm thcik rendering on other than fair faces of brick work in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed Mechanical Means all as specified and directed (Note:- Below 10 Sqm Qty be excuted throuth conventional mathod).

Supply only Liquid water proofing compound as specified and directed.

M&L for cement concrete type B-1, (1:2:4) using 20 mm graded stone aggregate including use and waste of form work as in coping ,kerbss and similar articles including weathering ,slightly rounded or chamfered angles with plain faces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper over primer and 1mm thick wall care putty complete all as specified and directed

M&L preparation and apply two coats cement base paint on new plastered surfaces of wall, including priming coat of exterior primer, white or tinted complete all as specified

M&L for preparing new by plastered surfaces of walls by affixing birla care wall putty rubbins to smooth finish and applying two coat of 100% premium acrylic emulsion Comouflaging pettern having VOC less than 50gm/Ltr and UV resitance as per IS 15489-2004 alkali and fungal resistance, dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @1.43 ltrs/ 10 Sqm over and including priming coat of exterior primer applied @0.9 ltr/10sqm over new by prepare surface and height upto 9 meter complete all as specified and as directed by Engineer-in-Charge. Note: Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) Make:- Asian Paint Apex ultima/Berger weather coat long life 10/Nerolac Excel everlast 12.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

S&F Pre-painted galvalume aluminium zinc coating GI bases corrugatede steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /clading to fixed with self tapping screw as specified .

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Supply only Cement ordinary portland Make :- ACC/Birla Corporation Ltd/Jaypee Rewa/ Ambuja cement Ltd/

Supply only Moorum/red bajri fine aggregate (sand) as per Sample

Supply only 12.50mm graded coarse aggregate as per sample

Supply only fly ash Old size building Bricks.

M&L for arrangment of soft soil from out side of MoD land and forming embankments including raising (or lowering) earth, spreding in layers as required at site, watering ramming/rolling and finishing to required size, shape, etc not exc 5 mtr high from base as slope complete all as specified and directed. Note:- Soil must be free from any types of garbage roots, stone , plastics etc. and maintained approval of civil authority and GE also.

Removal of complete existing water proofing membrane of any description on roof ( including taking down plaster/Demolition of cement concrete if any) surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items etc complete all as specified and as directed

Rendering 15mm thck in CM 1:4 mixed with integral WPC on concrete surface in roofs/wall incl applying cement slurry @ 3 Kg per Sqm finishing even and smooth without using extra cement ( WPC shall be measured seperately)(Mechanical means).

Applying roof treatment as below:-- (i) Applying 1st coat of bitumen primer membrane 0.4ltr/sqm by the same membrane manufacturer of density at 25 degree C’ 0.87-0.89Kg/Litre and viscosity 70-160 CPS till the surface properly impregnates and insolvent oil primer evaporates completely . (ii) Applying 2nd course of a coat of blown type bitumen of grade 85/25 heated to a temperature of 180 degree centigrade and applying @ 1.2 kg/sqm completely. (iii) Applying 3rd course of Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated five layer 3mm thick not less than 3.8 Kg/Sqm with 160 grams/sqm non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 overlap in length using butane torch with 10cm over laps which shall be thermo fused by flame . (iv) Applying two coats of alumunium paint @ 200 ml per sqm in APP membrane.

Supply only Liquid water proofing compound complete all as specified and as directed of as per manufacturer instruction.

Removing excavated materials/soils not exceeding. 50 m and depositing where directed at a level not exceeding 1.50 m complete all as specified and as directed by Engr-in-charge.

M&L for high performance water based UV resistant elastomeric PU liquid membrane coating cold applied by airless spray/brush/roller,ShailUrethane BTD liquid membrance at 1.0kg/sqm with an elongation of (400+-50)% as per ASTM D2370 and tensile strength of 14.0 n/sqmm as per ASTM D2370, No crack bridging ability at low temp as per ASTM C836,shore a hardness of min 50 as per ASTM D2240. (i) Applying 1st coat of primer ShailUrethane BTD with water @1:1 and use as primer @ 400 g/sqm. (ii) Applying 1st coat of ShailUrethane BTD @ 1 kg/sqm by airless spray/brush/roller and spread Non-woven Geo-textile fabric or fiber glass tissues/scrimp of 45 GSM with overlaps of 50mm in both direction and allow 1st coat to try 10-12hours. (iii) Applying 2nd coat of ShailUrethane BTD @ 1 kg/sqm by airless spray/brush/roller for final DFT of 1200 micron in two coats The system ShailUrethane BTD includes final base preparation as per site requirement,epoxy primer application and applying ShailUrethane BTD or approved equivalent in two coats at a coverage of 1kg/sqm etc complete as per manufacturer specificationincluding removal of old waterproofing system and repairing and cleaning the surface complete all as specified and directed.Make- STP Limited

M&L for cement concrete 1:2:4 type B1 (20mm graded agg) as in benching , haunching kerb etc rounded or chamfered on edges incl necessary formwork complete all as specified and directed

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof (upto 4th storey) finished and laid to required slope complete all as specified and as directed.

M&L for preparing new by plastered surfaces of wall by affixing birla care wall putty rubbins to smooth finishing and and applying two coat of 100% premium acrylic emulsion having VOC less than 50gm/Ltr and UV resitance as per IS 15489-2004 alkali and fungal resistance, dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @09.ltr /10sqm over new prepare surface and height upto 9 meter complete all as specified and directed by and directed by Engineer-in-Charge. Note : Primer and emulsion to be carried out through airless sprey machine (Mechanical means). Make Asian paint apex ultima/Berger weather coat long life 10/Nerolac excel everlas

M&L for complete removal of existing treatment on RCC/stone/concrete/brick walls including preparation of old surface by affixing birla care wall putty rubbins to smooth finishing and and applying two coat of 100% premium acrylic emulsion Comouflaging pettern having VOC less than 50gm/Ltr and UV resitance as per IS 15489-2004 alkali and fungal resistance, dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @09.ltr /10sqm over new prepare surface and height upto 9 meter complete all as specified and directed by and directed by Engineer-in-Charge. Note : Primer and emulsion to be carried out through airless sprey machine (Mechanical means). Make Asian paint apex ultima/Berger weather coat long life 10/Nerolac excel everlast 12.

Dismantling of water tank RCC/HDFE/Ferrocrete and removing it to store of size exc 250 Ltrs to 500 Ltrs capacity

S&F 500 Rotational moulded polyethlene water storage tanks white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 litres capacity (Make: Syntex /Plasto or equivalent).

Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site all as specified and directed

Supply and fixing in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore pipe including making connections complete all as as specified and fixed (Minimum weight 20mm-210 gms).

Supply and fixing in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 25 mm bore pipe including making connections complete all as as specified and fixed (Minimum weight 25mm-455 gms).

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls laid in trenches or in floors complete all as specified and directed

S&F 110 mm PVC (SWR) bends/shoe any radius complete all as specified and directed

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm bore/20mm/25mm bore complete all as specified and directed

Supply and fixing 20 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete as per direction of Engineer in Charge.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20mm bore complete all as specified and directed

Supply and fixing 25 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete as per direction of Engineer in Charge.

Refixing 20 mm bore old steel tubing and connections in new or old position complete all as specified and directed

Taking up or down steel tubing of 25 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed

S&F 25mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified.

Refixing 25 mm bore old steel tubing and connections in new or old position complete all as specified and directed

Disconnecting of water tank of 500 ltr capacity setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing,etc. measured separately).

Re- fixing Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including making connections complete all as specified

S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, Bore dia of 20mm complete all as specified and as directed.

S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, Bore dia of 25mm complete all as specified and as directed.

Taking down shutters of any description exc 1.00 Sqm and n.exc. 2.00 sqm each and removing from the site all as specified & directed.

Taking down chowkats or frames (without taking down shutter from the frame) not exceeding 1.5 Sqm each complete all as specified.

Repair/Replacement of Upvc door/Upvc windows of any size not more than 3.00 Sqm (aprox) or as per existing glass door/approved including taking out glazed shutters from frames and refixing in the same opening after servicing/replacement of broken pivots, floor spring rubber band and locking arrangement etc making good to obtain smooth opening and closing all adjusment to make the functional. Note :- Aluminium members shall only be paid for seperately under respective items complete all as specified and directed

Taking down caefully switch board complete along with old MS rectangular sunk type box heavy/medium duty of size 8 to 12 module from the existing position along with switches sockets regulators etc by unscrewing from board by disconnecting electric connections without damaging existing circuit and conduit complete and reconnecting all connection after comletion of job with making good the disturbed surface to match the existing one all as specified and directed.

Taking down caefully switch board complete along with old MS rectangular sunk type box heavy/medium duty of size 4 to 6 module from the existing position along with switches sockets regulators etc by unscrewing from board by disconnecting electric connections without damaging existing circuit and conduit complete and reconnecting all connection after comletion of job with making good the disturbed surface to match the existing one all as specified and directed.

Taking down caefully switch board complete along with old MS rectangular sunk type box heavy/medium duty of size 1 to 4 module from the existing position along with switches sockets regulators etc by unscrewing from board by disconnecting electric connections without damaging existing circuit and conduit complete and reconnecting all connection after comletion of job with making good the disturbed surface to match the existing one all as specified and directed.

M&L for modular metal flush boxes and white cover plate with frame of size 6/8 module for mounting modular type switches /socket/fan/ regulator etc Make - Goldmedal/cabtree(havells)/L&T or equivalent

M&L for modular metal flush boxes and white cover plate with frame of size 4 module for mounting modular type switches /socket/fan/ regulator etc.Make - Goldmedal/cabtree(havells)/L&T or equivalent

M&L for modular metal flush boxes and white cover plate with frame of size 3 module for mounting modular type switches /socket/fan/ regulator etc.Make - Goldmedal/cabtree(havells)/L&T or equivalent

M&L for modular metal flush boxes and white cover plate with frame of size 1/2 module for mounting modular type switches /socket/fan/ regulator etc.Make - Goldmedal/cabtree(havells)/L&T or equivalent

Supply and fix in repair modular switch 1 way 6A 1 module type all as directed .Make - Goldmedal/cabtree(havells)/L&T or equivalent

Supply and fix in repair modular switch 1 way 16A 1 module type all as directed. Make - Goldmedal/cabtree(havells)/L&T or equivalent

Supply and fix in repair modular Socket 6A 3 pin combined 2 module all as directed.Make - Goldmedal/cabtree(havells)/L&T or equivalent

Supply and fix in repair modular Socket 16A - 3/5 pin combined 2 module all as directed.Make - Goldmedal/cabtree(havells)/L&T or equivalent

Supply and fix in reapir Modular step type regulator 1 module type all as directed.Make - Goldmedal/cabtree(havells)/L&T or equivalent

Supply only LED tube RETRO LED 16 to 22 watt of size 4 ft long complete all as specified & approved by EIC.Make :- Havells cat part No-photon ultra 2.01213T8SSTL18WLED865SPC/Philips/ Bajaj cat part No-T8-112432/ or equivalent

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fitting and fixture and such as as switches, sockets ceiling rose,pendent holders,regulators,light fittings any type removing materials to store in safe custody or for credite etc, and making good the disturbed surface of walls and floors etc as directed.

M & L for point wiring with two single core PVC insulated & PVC unsheathed FRLS-H multistranded copper conductor cable of size 1.5 sqmm 1100 volt grade in and including making good the disturbed surface of wall with colour washing /distempering the surface to match the existing one in non metallic rigid PVC conduit medium grade 2 mm thick medium 20/25 mm dia with all accessories mounting all the surface of wall/ceiling/roof/etc with suitable size of 1 to 8 module metal flush boxes and including modular front cover plate & back plate for mounting modular type switches /socket/fan/ regulator etc including provision of one single core PVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dolly switch board complete all as specified and directed.Make-Polycab/Finolex/RR kabels/Plaza or equivalent Note:- surface Conduit shall be laid in celing portion only.

All as per item no 140 but one bell point controlled by one 5 Amp bell push complete

All as per item No 140 but point wiring for One 5 Amp socket point controlled by one 5 Amp switch on same board with cable 1.5 sqmm.

All as per item No 140 but point wiring for One 5 Amp socket point controlled by one 5 Amp switch independent board with cable 1.5 sqmm.

All as per item No. 140 here-in-before but with two single core PVC insulated & PVC unsheathed copper conductor cable of size 2.5 Sqmm 1100 volts grade and one single core PVC insulated &PVC sheathed solid copper conductor cable of size 2.5 Sqmm 1100 Volts grade as earth continuity conductor including PVC concealed conduict of size 20 to 25 mm with all accessories for 3 pin 15 Amps socket point on independent board complete all as specified and as directed. Make-Polycab/Finolex/RR kabels/Plaza or equivalent

S&F ceiling Rose, surface, bakelite 65 x50 mm three terminals, AC, 230 Volts complete all as directed.

S&F in repair decorative box type fitting for LED tube 16 to 22 watt luminaire for 230 volt AC,for LED tube 16 watt to 22 watt complete all as specified & approved by EIC.Make :- Havells cat part no-LUMENSMART20WLED865PCWH/Philips/Bajaj cat part-BCLSB 18NW or equivalent

M&L in repair for submain wiring with two run of single core PVC insulated unsheathed multi stranded FRLS-H copper conductor cable of size 4 Sqmm 1100 volts grade and one run of PVC insulated unsheathed multi standed copper conductor cable of size 4 Sqmm 1100 volts grade as earth continuity conductor drawn through in and including rigid non metallic PVC concealed / surface conduit of suitable size on roof/wall/ceiling including making good the disturbed surfaces of wall etc including taking out old unserviceable burnt/damaged sub main wiring from its existing position complete all as directed by Engr-in-Charge (Note : Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate). Make- Polycab/Finolex/RR kables/plaza. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex

M&L in repair for Submain wiring with 4 single core PVC insulated FRLS-H multistrand copper conductor cable of size 10 Sq mm drawn into and including non metallic heavy duty rigid PVC conduit not less than 25 mm size ISI marked ivory colour (Pressfit or similar brand ) with all conduit fittings / accessories and 2 run single core 10 Sq mm FRLS-H multistrand copper conductor cable as continuous earth wire complete. (Note for submain wiring: 10 run of single core cable and two run of earth wire will be measured as one length). Make- Polycab/Finolex/RR kables/plaza. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed flexible two core cable flat or circular of size 2.5 Sqmm solid aluminium conductor all as specifiied and directed.Make :- Havells/ Plaza/Finolex/Polycab or equivalent.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed flexible two core cable flat or circular of size 4 Sqmm solid aluminium conductor all as specifiied and directed.Make of Cable:-Havells/ Plaza/Finolex/Polycab or equivalent.

M&L for painting of ceiling fan, exhaust fan,with synthetic enamelled paint by spray painting machine including filling cavities with filler one coat after cleaning all dust etc including writing of MES No complete all as specified and directed.

M&L for rewinding of ceiling fan of size 1200 mm sweep with super enamelled copper winding wire of existing gauge, reassembling the same complete including taking down cleaning and replacement of split pin rubber reel, clamp, check nuts, flexible cord of size 3 core of suitable size including leathe work of shaft complete and refixing the same after repair all as directed

M&L for rewinding of exhaust fan of size upto 300/350 mm sweep with super enamelled copper winding wire of appropriate gauge for any make or model,reassembling and testing including taking down cleaning and replacement of split pin rubber reel, clamp, check nuts, flexible cord of size 3 core of suitable size complete and refixing the same after repair all as directed

Supply & replacement ball bearing No 6201/6202 for ceiling fan/exhaust fan including taking out old & UNSV complete all as specified and approved by EIC. Make- SKF/NBC or equivalent

Supply & replacement of Gun metal bush for ceiling fan/Pedestal an/Air circulator/wall fan etc including dismantling complete all as specified and approved by EIC.

M&L for exhaust fan louvers made out of mild steel suitable for exhaust fan of size 300mm sweep including taking down old complete all as specified and approved by EIC.

Supply and fix in repiar capacitor 2.5 mfd complete all as specified and approved by EIC. Make- EPCOS/Havells/M-CAP

M/s RAAJSHREE INFRA (BID ID -3150202)

M/s R K Associates (BID ID -3159544)

H C CONSTRUCTION (BID ID -3159549)

M/s A S Associates (BID ID -3159704)

M/s BHAGIRATH INFRA & ALLIED WORKS (BID ID -3160088)

PANKAJ AND BROTHERS (BID ID -3159441)

Tecj Nirmaan (BID ID -3159445)

Industrial Traders (BID ID -3159823)