Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.3 LAccepted-AOC | L1 | Accepted-AOC AOC awarded | |
| 2 | L2₹7.6 L+₹28,681 (3.92%)Rejected-AOC | L2 | Rejected-AOC AOC is awarded to L1 bidder i.e. Sri Suprabhat Khakhalary at his quoted price. | |
| 3 | L3₹7.7 L+₹35,095 (4.80%)Rejected-AOC | L3 | Rejected-AOC AOC is awarded to L1 bidder i.e. Sri Suprabhat Khakhalary at his quoted price. | |
| 4 | L4₹7.9 L+₹58,254 (7.97%)Rejected-AOC | L4 | Rejected-AOC AOC is awarded to L1 bidder i.e. Sri Suprabhat Khakhalary at his quoted price. |
Tender Value
₹9.4 L
EMD Value
₹19,000
Closing Date
17 Oct 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HoS Engineering
IPM Section, IIT Guwahati
Construction of entrance gate to Research Park building at IITG Campus
2023_IITG_775657_1
IITG/IPM/NIT/C/2023-24/17
Open Tender
Civil Works
Works
90 days
IPM Section, IIT Guwahati
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹19,000
Yes
2 Apr 2024
10 Oct 2023
19 Oct 2023
10 Oct 2023
17 Oct 2023
10 Oct 2023
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
(a) All kinds of soil.
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
(a) 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
(a) Foundations, footings, bases of columns, etc. for mass concrete
(b) Lintels, beams, plinth beams, girders, bressumers and cantilevers
(c) Columns, Pillars, Piers, Abutments, Posts and Struts
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
(a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
(a) Cement mortar 1:4 (1 cement :4 coarse sand)
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
15 mm cement plaster on the rough side of single or half brick wall of mix :
(a) 1:4 (1 cement: 4 fine sand)
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for wall cladding, kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge
(a) Granite work
Earth work in filling for site preparation with approved quality of earth including filling the portion within plinth area up to the formation level, peripheral apron & drains etc. complete up to formation level. In layers not exceeding 20 cm in depth including watering, ramming, consolidating to the acceptable density and dressing complete as directed including obtaining earth and removal of top vegetation dressing the surface upto proper grade and slope. (The rate shall be inclusive of providing earth includingall leads and lifts, payment of land compensation for obtaining earthpayment of royaltyand taxes etc. the payment will be made in profile measurement.)
(a)With the earth from outside the campus.
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
(a) With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
Supplying and stacking of graded stone aggregate at site of size range.
a) 63 mm to 45 mm size stone aggregate
b) 53 mm to 22.4 mm
Supplying and stacking of stone screening at site of size range.
(a) Stone screening 13.2 mm nominal size (Type A)
Laying water bound macadam sub-base with stone screening and binding material including screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tone capacity etc. Complete (payment for stone aggregate, screenings, kankar, moorum and red bajri etc. To be made separately).
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
(a) 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
(a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
(a) Two or more coats on new work
Providing and driving bholuka bamboo piles for compacting soils under foudations as per direction of Engineer-in-Charge.
DHIRAJ THAKURIA
MANTU KUMAR PATHAK
B & L ASSOCIATES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .