REPAIR MAINT OF SECURITY FENCING AT RMS SW ZONE AND DIMAPUR UNDER AGE BR II

Amount

B/R Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good to distrubed natural ground etc complete all as specified and as directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good to distrubed in concrete or brick work etc complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and as directed.

Dismantling of Chain link fencing any size or type etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement morter including all quoins, arches pillars etc but excluding ashlars facings dressed stone work and precasted concrete article etc complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for TMT steel bars 10 mm dia and above, as in reinforcement for concrete, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm etc complete all as specified and as directed.

All as per item No 09 here-in-above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc complete all as specified and as directed.

M&L for providing reinforced cement concrete type B-1, (1:2:4) using 20mm graded stone aggregate in precast posts, fencing posts, straining or terminal posts, struts etc for fencing, average sectional area exc 100 sqcm and not exc 250 sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed etc complete all as specified and as directed.

M&L angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and as directed.

S & F galvanised 2 stranad steel barbed wire 2.24 mm dia barbed with 2 mm dia barbed at 75 mm spacing s and straing and fixing to any type of standard rail strain -ing Bolt , including, securing or tying at crossing with and provision of galvanised mild steel wire , staples or steel pine etc including dismantling the old barbed wire,etc complete all as specified and as directed.

All as per item No 13 here-in-above but but restraining & resecuring including making good staples etc complete all as specified and as directed..

Excavation in post hole(or similar holes) each n.exc 0.50 Cum getting out returning filling in and ramming earth around in layers n.exc 25cm watering and removed surplus soil to a distance n.exc 50m and making good surface in any type of soil etc complete all as specified and as directed.

M&L for PCC Type C-2 (1:3:6) using 40mm graded stone aggregate as in foundation of post holes etc complete all as specified and as directed.

Supply only Chain link MS galvanised fencing, any size or type etc complete all as specified and as directed.

Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire etc complete all as specified and as directed.

M&L mild steel round bars 10 mm dia and over cut to length bend to shape as required, including straghtening etc as required in horizontal bar for securing chain link fencing etc complete all as specified and as directed.

Supply and fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10cm and n exc 15cm long - 11 to 15mm Diameter of neck etc complete all as specified and as directed.

Supply and fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long - 11 to 15mm Diameter of neck etc complete all as specified and as directed.

M&L for preparation of new steel surface n exe 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 CM in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

M&L 75mm thick PCC (1:4:8) type B2 using 40mm graded stone aggregate as in sub base etc complete all as specified and as directed.

M&L 100mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in floor finished even and fair, making impression of expanded metal whilst concrete is green etc complete all as specified and as directed.

M&L 40mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floor laid in alternate bays, finished the surface even and smooth without using extra cement etc complete all as specified and as directed.

M&L for brick work with sub class' B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6.etc complete all as specified and as directed.

M & L for rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound @ 3% by wt of cement finished fair faces of brick/concrete surfaces even and fair without using extra cement etc complete all as specified and as directed.

M & L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement etc complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for three coats of white wash on newly plastered surfaces of walls including preparation of surfaces etc complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls over a coat of primer etc complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with steel wire brushing and applying one coat of white wash on wall etc complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint on external wall surfaces etc complete all as specified and as directed.

M&L for preparation of old painted steel surfaces over 10 cm width/girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed.

S & F in repairs Providing precast cement concrete louvres and jallies,type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) 25mm thick (mea sured solid) and setting in mortar 1:4,including necessary form work and mould etc complete all as specified and as directed.

M&L for RCC (1:1.5:3) type A-1 Nominal mix using 20 mm graded stone aggregate as in plinth beams, lintel, lintel band and gable beams etc including formwork etc complete all as specified and as directed.

Ms ARENKOKLA CONTRUCTION

M/S MUNGA LAL PRASAD

Kalim sons

Rameshwar Prasad

M/S ARVIND GROUP OF CONSTRUCTION & INFRASTRUCTURE

Shri H Kivigho Zhimo

VIHUTO YEPTHO