CONSTRUCTION OF BLACK TOP ROAD FROM OFFICE COMPLEX TO OFFICERS MESS AT MLI UNDER GE 859 EWS

Amount

Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil completed all as specified and directed.

Add to item no. 1 for every 3cm or part above or below 15cm average depth completed all as specified and directed.

Rolling and consolidating formation surfaces in cutting with power roller exc 8 tonne & n exc 12 tonne as per specified and directed.

M & L for 150 mm spread thickness soiling (or sub base ) with broken boulders or quarried stone, surface formed and rolled and consolidated to required gradient and camber completed all as specified and directed.

M&L for two layers of 75 mm thick (compacted thickness) WBM with granite coarse aggregate of grading 2 (63 to 40 mm size ) spread , rolled and consolidated to gradient and camber required completed all as specified and directed.

Preparing surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc completed all as specified and directed.

M&L for applying evenly a tack coat with bituminous primer using paving bitumen VG-10 at 10 kg per 10 sqm completed all as specified and directed.

M&L for 40 mm thick bituminous premixed carpet (Consolidated thickness) with 0.54 cum of stone chippings mixed with 29.250 Kg of binder using paving bitumen VG-30, rolled and compacted to required camber and gradient completed all as specified and directed.

M&L for premixed sand seal coat with 0.06 cum of sand mixed with 6.8 kg of bitumen, applied and rolled to a uniform smooth surface completed all as specified and directed.

M&L for 75 mm light wearing surfaces with moorum/ red bajri spread, rolled and consolidated to required gradient and camber completed all as specified and directed.

Removing excavated soil to a distance n.exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L for providing precast PCC 1:3:6 type C-1 using 20mm graded stone aggregate solid block of size 300x200x100mm as in continuous road edging laid in CM1:6 on edge laid 200mm side vertically with including excavation and earth work completed.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fix solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mmX125mmX25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc all as specified and directed.

S&F cat eye solar reflective type of metal body alloy of size 100mmX100mm x20mm with PAMA striplens reflector of modal No DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instruction completed all as specified and directed.

S&F metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflector made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600mm hight duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

M/S ASHOK CONSTRUCTION

M/S DOLKO ENTERPRISES BOMDILA

D.P. Traders

M/S GS ENTERPRISES

M/S YOGENDRA CONSTRUCTION CO

M/S MURPHEW ENTERPRISES

Sikha Traders