REPAIR/MAINT OF INTERNAL/EXTERNAL ELECTRIFICATION SYSTEM, B/R WORKS AND OTHER CONNECTED WORKS SUCH AS FIRE FIGHTING EQPT, WATER SUPPLY PIPE LINE SUBMERSIBLE PUMP AT WATER SUPPLY INSTALLATION AT PRABUDH VIHAR (PCDA) DEVIKHERA UNDER GE E/M LUCKNOW

Amount

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level), complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and directed.

M&L for 40 mm thick PCC type B-1 1:2:4 (using 20 mm graded stone aggregate) in floor, finished even and smooth with using extra cement complete all as specified and directed.

M&L TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming Fe- 500, complete all as specified and directed.

M&L TMT bar 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming Fe- 500, complete all as specified and directed.

PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping, chajja, facia and the like including weathering, slightly rounded or chamfered angles with & incl necessary use and waste of form work for fair faces of concrete complete all as specified and directed.

Supply only integral water proofing compound powder conforming to IS specification, complete all as specified and directed.

Mild steel work Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 as in small articles like angle iron framing work for manhole, rungs/steps in man hole, complete all as specified and directed.

M&L for treating small articles of steel like MS rungs etc with coal tar black paint icl preparation of surface, area tarred not exc 0.1 sqm, complete all as specified and directed.

Taking up or down steel tubing and connections, 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections, 20 mm bore complete all as specified and directed.

Refixing of old 15 mm bore steel tubing and connections in new or old position (walls, ceiling , floors, etc.) complete all as specified and directed.

Refixing of old 20 mm bore steel tubing and connections in new or old position (walls, ceiling , floors, etc.) complete all as specified and directed.

M&L 15 mm bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L 20 mm bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Taking down existing PVC water tank capacity 500 ltr and S&F Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 500 litres complete all as specified and directed.

Taking down existing PVC water tank capacity 1000 ltr and S&F Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 1000 litres complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

M&L for PVC Wall panelling / Lining consisting of 5 mm thick Plain / wood colour PVC sheet as approved inclusive of solvent cement and fixing at site on PVC frame including complete fixing arrangments on wall as per manufactures specifications, complete all as specified and directed.

S&F of E-board of size 600 mm x 600 mm x 4 mm thick white prelaminated seif embosed reinforced designer ceiling board / tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24 mm wide T-section / Angle section, complete all as specified and directed.

M&L Suspended ceiling, comprising 12.5 mm thick reinforced gypsum boards Conforming to IS-2095 , GI perimeter channels, intermdiate channels, etc. including finishing the exposed surfaces with Oil bound distemper two coats complete all as specified and directed.

Taking down chowkhats or frame (wooden/aluminium) n. exc. 1.5 Sqm each with shutters (with out taking off shutters from the frame) and taken as credit complete all as specified and directed.

Taking down chowkhats or frames (wooden/aluminium) with shutters without taking off shutter from the frames exc. 1.5 but n. exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description n exc 1 sq.m each complete all as specified and directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified and directed.

S&F for PVC door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

S &F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm with stuck inside complete all as specified and directed.

S&F 250 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.

S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring, complete all as specified and directed.

Hacking out old broken glass, any thickness, size, quality, or description, from frame nexc 1.5 Sqm each pane, complete all as specified and directed.

S&F for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty nexc 0.5 Sqm each pane, complete all as specified and directed.

S&F for 3.0 mm thick figured glass ordinary quality and glazing with oil putty n.exc 0.5 Sqm each pane, complete all as specified and directed.

S&f for 4.8 mm thick sheet glass odinary qulity and glazing with neosprene beading n.exc 0.5 Sqm in each pane, complete all as specified and directed.

S&F in repairs Chromium plated fancy long body Bib taps with cup , cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair cast iron floor trap with chromium plated grating including jointing to waste pipe wih cement mortar (75 mm bore of pipe), complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose without swivel joints , any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs Chromium plated ,Concealed stop cock Reduced body ISI Marked, , cast copper alloy, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle, screwed externally both ends for unions etc. and fixed complete all as specified and directed.

S&F in repair CP Angle stop cock ( one way) long thread with wall flange , fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed.

S&F in repairs Pillar taps, fancy type cast copper alloy , with capstan heads, chromium plated, screwed down for 15 mm bore pipe, high pressure, with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs PTMT( Polytetra Methyllene Terephthalate )Bib taps suitable for 15 mm bore pipe standard of PTMT any colour screwed, for iron pipe and fixed ( Minimum weight 15 mm-90 gms complete all as specified and directed.

S&F in repairs CP Angle stop cock( two way) long thread with wall flange , screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed.

S&F in repairs CP mild steel gratings suitable for 75 / 100 mm dia NT/ FT complete all as specified and directed.

S&F in repairs Chromium plated Brass Tubular towel rod, of 24" (60 cm long) complete all as specified and directed.

S&F in repair white vitreous China wash down water closet pan (padestal pattern Water Closet ) , ( excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc, complete all as specified and directed.

S&F in repairs white vitreous China Squatting pan ,'Orissa' pattern size 580 x 440 mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe, anti syphon complete all as specified and directed.

S&F in repairs 10 lit capacity Low level flushing cistern, moulded from virgin poly propylene complete all as specified and directed.

Supply and fix in repairs Plastic water closet seat, white, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs PTMT connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair white vitreous China bowl type urinal flat back, size of 465x355x265 mm (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe , and waste pipe) , fixed in repairs including connections to flushing pipe and outgoing, complete all as specified and directed.

S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550mmx400mm including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting complete all as specified and directed.

S&F in repair 32 mm bore flexible pipe of PVC fixed to WHB / urinals as waste pipe (not less than 600mm) including PVC coupling complete all as specified and directed.

M&L in repairs 32 mm waste fittings , brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Blank

S&F in repair Gun metal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe and fixed complete all as specified and directed.

S&F Gun metal, in repair globe or gate valves, with iron wheel head, screwed both ends for 15 mm bore dia. iron pipe and fixed complete all as specified and directed.

S & F Neosprene rubber beading including taking down old rubber beading as in aluminium window and door shutter, complete all as specified and directed.

S&f for 12 mm thick toughned glass odinary qulity and glazing with neosprene beading, SS clip or cleats of any size any position, complete all as specified and directed.

Repairing of existing aluminium door single / double leaf including oiling and greasing of floor springs, replecing of rubber beading if required, replacement of hinges, handle, towerbolt of any size any type present at site on required basis, and making the door and shutter serviceable complete all as specified and directed. (Note :- Floor door springs where renewed shall be measured and paid separately.

Repairing of existing toughend glass door single leaf including oiling and greasing of floor springs,replacement of hinges, handle, lock of any size any type present at site on required basis, and making the door and shutter serviceable complete all as specified and directed. (Note :- Floor door springs where renewed shall be measured and paid separately.

Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of minimum 1.25 mm thick alu-minium alloy sheet foun-dation box,main body with stainless steel cover, governing pivot made of mild steel heavy duty fixed, complete all as specified and directed.

S&F in repairs Aluminium body (extruded section) body Door closer hydraulically regulated, designation No. 2 , universal type, suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed, complete all as specified and directed.

S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size of brass body, complete all as specified and directed.

S&F Anodised aluminium frame for doors, windows, ventilators, partition section with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief, complete all as specified and directed.

S&F aluminium partition with 3 mm thick aluminium composite panel at bottom panel and 4.8 mm thick glass on top panel incl aluminium frame work with aluminium section of size 50 mm x 44 mm (minimum) & wall thickness 2.5 mm (minimum), glazing clip and neosprene rubber beading complete all as specified and directed.

S &F 3mm thick aluminium composite panel with aluminium frame and shtter in door incl glazing clip and neosprene rubber beading complete all as specified and directed.

S&F 3mm thick aluminium composite panel with glazing clip and neosprene rubber beading complete all as specified and directed.

S&F Aluminium grill not less than 3.13 Kg per sqm fixed with frame in windows/ventilator complete all as specified and directed at site.

S&F aluminium sections ( conforming to IS) door with frame of size 100mmx 44.45mm wide fabricated with 2mm thick section , double leaf shutter with 44.45mm wide fabricated with 2mm thick section having vertical and top rail 83.50mm, bottom rail and middle rail 115mm and including necessary jointing cleats, screws, neosprene rubber beading, PVC packing, tinted glass panes 4.8 mm nominal thickness complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L 30mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(b) complete all as specified and directed.

S&F 100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed.

S&F 75mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 20 mm thick in cement mortor 1:4, complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 350 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 10mm thick screed in CM 1:3, complete all as specified and directed.

S&F powder coated anodised Aluminium alloy sections sliding windows shutters with frames comprising Series -C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips,locking device, heat absorbing glass 4.8 mm nominal thicknes in 2 shutters and 0.46mm dia SS wiremesh in one shutter complete all as specified and directed.

S&F for anodised Aluminium alloy sections fixed windows shutters with frames of section weight not less than 0.55 Kg/m duly fitted with neoprene beading, glazing clips,locking device, heat absorbing glass 4.8 mm nominal thicknes complete all as specified and directed.

S & F in repairs powder coated aluminium grill 3.13 Kg per Sqm (min) with grill frame of 0.297 Kg per meter (min). (Design as approved by Engr-in-charge), complete all as specified and directed.

Excavating in post holes each not exc. 0.5 cum getting out in soft / loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm, watering and removing surplus soil to a distance not exc. 50 m and depositing where complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation and mass concrete, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for preparing new steel steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of roof sheet (any descriptions) including ridges in roof covering complete all as specified and directed.

S&F in repair Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 2mm thick fibre glass reinforced transclucent corrugated sheeting with two corrugations side lap fixed with L type or J- type or cranked hook bolts and washers in roof, wall etc complete all as specified and directed.

M&L for providing cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in roof kerbs /padding or similar work or mud stops rounded or chamferred on edges, complete all as specified and directed.

M&L in repairs hand shower including fitting to 15mm bore GI pipes, complete all as specified and directed.

M&L in repairs overhead shower including fitting to 15mm bore GI pipes, complete all as specified and directed.

S& F in repairs 15mm dia single lever wall mixer with Hand shower complete all as specified and directed.

S&F in repairs 15 mm brass chromium plated two way Bib cock with wall flange complete all as specified and directed.

M&L in repairs brass chromium plated single towel rail 600 mm long complete all as specified and directed.

M&L 6-10mm thick wall tiles in repairs Duracrete manufactured by M/S Intex Designer Tiles Pvt Ltd. or equivalent make approved by GE ) as invertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 10mm thick screed in CM 1:3, complete all as specified and directed.

M&L in repairs 22 mm thick floor tiles ( Duracrete manufactured by M/S Intex Designer Tiles Pvt Ltd. or equivalent make approved by GE ) as in floor / path etc. set over 20 mm thick screed bed in CM 1:4 and jointed in neat cement slurry and pointed with polymer based cementious tile jointing filler complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

M&L for exterior grade outdoor coloured floor tiles (heavy duty) of tactile series of size 300x300x10mm of Make Johnson endura or equivalent make approved by GE bedded over and including 20mm thick screed bed in CM 1:6 and jointed in cement mortar to match the colour of floor complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for 75mm thick plain cement concrete type D- 2, 1:4:8 (using 40mm graded stone aggregate) complete all as specified and directed.

Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for acrylic polymer-modified cementitious high performance coating (two component) with high solid content and can be used for both side waterproofing due to its excellent bonding, good waterproofing and unmatched resistance to hydrostatic pressure which resist up to 5 bars of positive hydrostatic pressure and form highly elastic film which provides elengation up to 100 as per manufactures instructions complete all as specified and directed. (Note:- Work to be carried out by the authorised applicators of manufactures only)

M&L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:6 finished fair & even without extra cement, including mixing only WPC as per manufacturer instruction complete all as specified and directed. Note: WPC measured & paid for separately

M&L for rendering 10 mm thick on brick work/ concrete surfaces in cement mortar 1:6 on fair faces finished fair & even, complete all as specified and directed.

M&L rendering 5 mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3 complete all as specified and directed.

M&L for preparing surfaces, plastered or unplastered new surfaces of ceiling and applying three coats white wash complete all as specified and directed.

M&L Preparation of newly plastered surfaces and applying two coat of oil bound disemper over one coat of primer all as specified on walls surface including a coat of 3 mm wall care putty, complete all as specified and directed.

M&L applying two coats exterior emulsion weather coat paint of Apex (Asian Paint) / Weather coat (Berger) / Excel Top Guard (Nerolac) over newly plastered surface including preparation of wall surface over and including 1 mm thick wall care putty & primer complete all as specified and directed.

M&L for Preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L applying one coats of plastic emulsion paint interior quality any shade over old painted surface including preparation of wall surface complete all as specified and directed.

M&L for Preparation of old decorated surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

All as per item No 117 above but on ceiling.

M&L for Preparation of old painted surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of cement base paint of any tint/shade complete all as specified and directed.

All as per item No 119 above but two coats

M&L for Preparation of old painted surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of distemper oil emulsion of any tint / shade complete all as specified and directed.

All as per item No 121 above but two coats

All as per item No 121 above but on ceiling.

M&L for Preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Complete removal of existing treatment of walls and applying two coats of distemper oil emulsion over a coat of cement base wall care putty average thickness 2 mm including prepration complete all as specified and directed.

M&L preparation of old painted brick, stone, concrete, AC or decorated plastered surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed

M&L preparation of old painted surface of walls and applying one coat exterior emulsion weather coat paint of Apex (Asian Paint) / Weather coat (Berger) / Excel Top Guard (Nerolac) complete all as specified and directed.

M&L for Brick work in half brick thick wall with Fly ash brick designation 100 Kg / Sqcm, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, using bricks of size 230 mm x 110 mm x 70 mm confirming to IS 12894, complete all as specified and as directed by Engineer-in-Charge.

S&F steel work in tubular trusses / posts including special washers etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St-240, complete all as specified and directed.

M&L for Rolled mild steel in roof trusses (framed), trussed, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engineer-in-Charge

M&L for filling joints between two panels with mix of 85/25 bitumen and sand in 1:3, complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection/path and the like complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping,padding and bed block, wall through and the like including weathering slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.

M&L 18-20mm thick machine cut Kota stone slab flooring with marble stone strips/ slab/ tiles as per design approved, over and including cement screed bed 15mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

M&L 18-20mm thick machine cut Kota stone slab as in skirting /riser over cement screed bed 10mm thick in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

Grinding of old kota stone flooring upto mirror finish level including polisihig etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 15mm thick screed in CM 1:6 complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

M&L Vitrified ceramic tiles 10mm thick (square/ractangular) Coloured polished tiles, area of each tile n.exc 0.38 sq m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match over 15 mm thick screeding in CM 1:6 complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

Demolition of existing roof treatment of any type, complete all as specified and directed.

M & L 15 mm thick screed plaster on RCC slab in CM 1:4 including mixing only water proofing compound as per manufacturer instruction complete all as specified and directed. (Note:- WPC to be measured and paid separately.

M&L for water proofing treatment on roof surfaces in the following manner:- (a) The surfaces shall be painted with hot bitumen grade 30/40 confirming to IS-73 @ 1.20 kg / sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 ltr /sqm. (b) Supply & lay 3 mm thick APP water proofing membrane reinforced with non woven polyster matt laid using butane torch by torch application with a side lap of 10 cm & 15 cm end lap weinghing not less than 3.5 kg / sqm. Note: - (i) Work to be carried out through authorised applicators of the manufactures and work will be carried out in complete / in patches in roofs (ii) Contractor shall submit written gurantee of 10 years from date of completion & submit security deposit @ 2.5% of executed amout or Rs 6250.00 which ever is more.

M & L for applying one coat of aluminium paint including preparation of surfaces and primer, complete all as specified and directed.

M & L for 40 mm thick brick tiles laid on 15 mm thick cement mortar in 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement, complete all as specified and directed.

Taking down PVC pipes (any sizes) incl all fittings, complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, or fixed to wall, complete all as specified and directed.

M&L Chequered cement concrete coloured tiles 30 cmx30cmx20 mm thick with coloured cement and pigment , set, jointed and pointed in neat cement slurry over 20mm thick screed bed in CM 1:4 as in floors complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

M & L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

M & L for applying two coats of synthetic varnish over old wooden surfaces including preparation of surfaces complete all as specified and directed.

S & F for corner sheet glass shelf of 4.8mm thick fixed with Stainless steel clamps and other necessary fittings suitable for holding in wall corner with minimum 200 mm length in front circular shape, complete all as specified and directed.

S & F for sheet glass shelf of 4.8mm thick fixed with Stainless steel clamps and other necessary fittings suitable for holding in wall of minimum size 300x150mm, complete all as specified and directed.

M&L for False ceiling, with and including GI powder coated frame work and mineral fibre ceiling tiles, suspended with ceiling in and including of dismantlingof ceiling boards (fiber, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and directed.

Temporarily blocking and cleaning of inlet of septic tanks/manhole with suitable wooden plugs/gunny bags and pumping/bailing out effluent and taking out/removing the accumulated sludge soil sewage/any other foreign/foul materials etc (solid/semisolid) from the septic tanks/manholes. complete and cleaning the septic tank/manholes with water by mechanically including taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed. NOTE: (i) Depth of manhole/SOAK WELL/SEPTIC TANK exc 0.5 to 1.5M from below GL (ii) Size of tank upto water level shall be measured

Temporarily blocking and cleaning of inlet of septic tanks/manhole with suitable wooden plugs/gunny bags and pumping/bailing out effluent and taking out/removing the accumulated sludge soil sewage/any other foreign/foul materials etc (solid/semisolid) from the septic tanks/manholes. complete and cleaning the septic tank/manholes with water by mechanically including taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed. NOTE: (i) Depth of manhole/SOAK WELL/SEPTIC TANK exc 1.50M to 4.50M from below GL (ii) Size of tank upto water level shall be measured

Temporarily blocking of sewage line with suitable wooden plugs/gunny bags and cleaning the same by rod-ding and removing the sludge alongwith brick bats/stones/broken bottles/any other foreign materials etc complete and cleaning the sewage line with water by mechanilly as directed by EIC, and taking out the blocking arrangements of inlet and making the system functional for 150 mm bore size of pipe lines, complete all as specified and directed.

All as per item No 155 above but 200 mm bore

All as per item No 155 above but 250 mm bore

M&L for 150 mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as specified and directed.

S&F vitreous china Europeon Water Closet (one piece) (Cascade type)of specified make with flushing cistern & white seat cover complete all as specified and directed.

M & L for precast cement concrete Type B0,1:2:4 (using 12.5mm graded stone aggregates) louvres and jallies, 25mm thick (measured solid), including all mouldings and set in CM 1:4 complete all as specified and directed.

Providing precast cement concrete type B0, 1:2:4 (using 12.5mm graded stone aggregates) as in win dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match including set in CM 1:4, complete all as specified and directed.

S & F for chrominium plated towel ring of circular/oval/rectangular shape with complete fixing arrangments to wall, complete all as specified and directed.

S&F Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and directed.

S&F Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and directed.

Overhauling, Oiling, Greasing and servicing of Air blower of 10 to 15 HP capacity by Opening of all parts, suction air filter, bush, bearing, rotor, drum, bearing of motor shaft, Neck ring, coupling with studs between motor & air blower, & all other parts and re-assemble the same after greasing, oiling complete all as specified and directed. Note : - (i) Parts renewed shall be measured and paid separately under appropriate items. (ii) Overhauling and servicing of Air blower should be carried out by Auth company or dealer which is specialist of above. (iii) Blower of make Kirloskar provided at site. All spear parts of blower shall be of make as recommended by OEM and approved by GE.

Labour for taking out unserviceable raw non clog submersible type raw effluent sewage lifting Submersible pump set of capacity upto 10 HP of rating 3 phase 440 Volts supply from raw sewage collection sump of STP plant well upto 15 mtr depth at any location for overhauling, Oiling,Greasing and servicing of capacity up to 10 HP by Opening of all parts, bush, bearing , rotor, drum, bearing of motor shaft, Neck ring, coupling with studs between motor & all other parts and re-assemble the same after greasing , oiling of and shifting the same to authorised workshop for repair, testing and re-installation / Re-fixing / lowering in the sewage sump complete all as specified and directed. Note :- (i) Parts renewed shall be measured and paid separately under appropriate items (ii) Overhauling and servicing of non clog submersible Pump should be carried out by Auth company or dealer which is specialist of above. (iii) Pump of make Kirloskar provided at site. All spear parts of pump shall be of make as recommended by OEM and approved by GE.

Attend the day to day complaint for minor repairing of non functing part to Air Blower, Air Blower Motor, non clog submersible Pump, motor and all connected parts complete all as specified and directed. Note : - (i) Parts renewed shall be measured and paid separately under appropriate items (ii) Complaint Should be attend immediately within two hrs & Rectified the same day at the earliest without effecting of service.

Blank

Material and labour for taking out the silt & foreign object, Cleaning & Removing sludge from course bar screen including all chamber of equilasation tank upto depth of maxium 15 Mtr any capacity STP as per direction by EIC complete with tools and plants as required at site and safe disposed off at place not more than 1.5 KM away at such a place which is not determental to public health. complete all as specified and directed.

Material and labour for taking out the silt & foreign object, Cleaning & Removing sludge from Fine bar screen, Oil & Grease Chamber complete with all as specified & direction by EIC complete with tools and plants as required at site and safe disposed off at place not more than 1.5 KM away at such a place which is not determental to public health complete all as specified and directed.

Material and labour for taking out the silt & foreign object, Cleaning & Removing sludge from MBBR I & II Chamber complete with complete all as specified and directed.

Material and labour for taking out the silt & foreign object, Cleaning & Removing sludge from Tube Setteler Chamber complete all as specified and directed.

Supply and fix Plastic Media MBBR (Media) as per existing size & specification of IS complete all as specified and directed.

Supply and fix in repair of bubble diffuser as per existing specified size complete all as specified and directed.

Supply and fix in repair PAC media in tube settler tank as per existing specified size complete all as specified and directed.

M&L for Replacement of filter media of sludge drying bed as per specification laid specification of IS, complete all as specified and directed.

Supply and fix in repair of distribution box at equilistion well complete all as specified and directed.

M & L for replacement of 40 mm size gun metal gate valve, complete all as specified and directed.

M&L for repair of leackage of old MS pipe of any size with welding / brazing etc complete and applying two coats of epoxy paint with one coat of primer on welded portion complete all as specified and directed.

Supply and fix in repair of pressure gauge upto 7 Kg / cm2 complete all as specified and directed.

Material and Labour for taking out / dismantling of Air blower pump / Fire fitting motor / water supply motorset of rating 3 phase 440 Volts of capacity 5 to 12.5 HP from plateform at any location and shifting the same to contractor's workshop for repair and re-installation / refixing the same at its original site and testing complete all as specified and directed. (iii) Pump / motor of make Kirloskar provided at site. All spear parts of pump / motar shall be of make as recommended by OEM and approved by GE.

M&L for Cutting out the existing winding of the motor, opening of winding, re-winding of motor with same size of rewinding with super enamelled copper winding including tapping, varnishing, baking and furnishing with the insulating sleeve and making connection complete all as specified and directed.

Repairing of pump by re-threading of worn out studs holes and supply and fixing over size studs with nut and washer complete all as specified and directed.

Repairing of pump shaft by depositing metal on it by breazing, grinding and polishing to appropriate size of the shaft complete all as specified and directed.

Supply and fixing gun metal/stainless steel bush of pump shaft complete all as specified and directed.

Supply and fixing driven end bearing of blower shaft complete all as specified and directed.

Supply and fixing end bearing of blower shaft complete all as specified and directed.

Supply and fixing gland and packing complete all as specified and directed.

Supply and fixing coupling with studs between motor & air blower complete all as specified and directed.

Supply and fixing in replacement suction air filter complete all as specified and directed.

Supply and fixing in replacement of suction silencer complete all as specified and directed.

Supply and fixing Neck ring complete all as specified and directed.

Supply and fixing bearing of motor shaft complete all as specified and directed.

Material and Labour for taking out unserviceable / burnt raw non clog submersible type raw effluent sewage lifting Submersible pump set of capacity 5 to 10 HP of rating 3 phase 440 Volts supply from raw sewage collection sump of STP plant / Pump house at any location and shifting the same to authorised workshop for repair and re-installation / Re-fixing / lowering in the sewage sump complete all as specified and directed. Note :- Parts renewed shall be measured and paid separately under appropriate items listed here below. Pump of make Kirloskar provided at site. All spear parts of pump shall be of make as recommended by OEM and approved by GE.

M&L for cutting out the existing winding of stator of submersible motor of any make and rewinding with water proof copper winding wire of appropriate guage as existing complete all as specified and directed.

Straightening of the slots of stator of submersible motor of any make, complete all as specified and directed.

Supply and fixing thrust bearing block complete of submersible pump of any make, complete all as specified and directed.

Supply and fixing gun metal bushes for submersible motor as per manufacturer's design and specification, complete all as specified and directed.

Supply and fixing sand guard of submersible motor, complete all as specified and directed.

Supply and fixing of bronze metal impellars, complete all as specified and directed.

Supply and fixing of shaft sleeve, complete all as specified and directed.

Supply and fixing of set of gasket and O-ring, complete all as specified and directed.

Supply and fixing of Mechanical seal motor end, complete all as specified and directed.

Supply and fixing of Mechanical seal pump end, complete all as specified and directed.

Supply and fixing deep groove ball bearing motor side, complete all as specified and directed.

Supply and fixing groove ball bearing pump side, complete all as specified and directed.

Supply and fixing pump casing, complete all as specified and directed.

Supply and fixing of intermediate casing, complete all as specified and directed.

Supply and fixing of bearing housing, complete all as specified and directed.

Supply and fixing of bearing cover, complete all as specified and directed.

Supply and fixing of shaft protection sleeve, complete all as specified and directed.

Supply and fixing of bowl, cast iron complete all as specified and directed.

Supply and fixing of bearing sleeve complete all as specified and directed.

Supply and fixing of rotor, complete all as specified and directed.

Supply and fixing of cable assembly, complete all as specified and directed.

Supply and fixing in replacement mild steel Nuts, bolt and washer, hexagonal full threaded 12 mm dia 100 mm long complete all as specified and directed.

Supply & filling of new Gear Oil Grade G-90 for Air Blower complete all as specified and directed.

Supply and fixing in repairs air blower pulley as per sample complete all as specified and directed.

Strip opening of air blower and cleaning of air filters and air silencers with required material / liquid shop complete all as specified and directed.

Supply and fixing in repairs three phase DOL starter with single phase preventor, MCB TPN 32 Amps 'C' Series, Voltmeter, ammeter and indication piolet lamps for three phase i.e. R.Y.B, having provision for mauanl by pass and suitable for operating submersible pumps sets/blower motors upto 10 HP capacity complete all as specified and directed.

Supply and fixing in repairs three phase automatic star delta starter with three phase preventor, MCB TPN 32 Amps 'C' Series, Voltmeter, ammeter and indication piolet lamps for three phase i.e. R.Y.B, having provision for mauanl by pass and suitable for operating submersible pumps sets/blower motors upto 10 HP capacity including all connected acessories in stater as per existing starter complete all as specified and directed.

Supply and fixing in repairs bi-metallic overload relay with single phasing protection of range 2.5 to 4 Amps of make - Siemens or any other specified make complete all as specified and directed.

Supply and fixing in repairs bi-metallic overload relay with single phasing protection of range 6 to 10 Amps of make - Siemens or any other specified make complete all as specified and directed.

Supply and fixing in repairs bi-metallic overload relay with single phasing protection of range 10 to 20 Amps of make - Siemens or any other specified make complete all as specified and directed.

Supply and fixing in repairs power contactor ML-3, 3 Phase, 415 Volts current carrying capacity 4 to 25 Amps, coil voltage 220 volts, 50 Hz complete all as specified and directed.

Supply & Fixing in repairs MCB TPN 32 Amps, 440V AC 'C' series ISI Marked, complete all as specified and directed.

Supply and fix in repairs Single Phase preventor to prevent single phasing , reverse phasing wiring & testing complete all as specified and directed.

Taking down old unserviceable /deteriorated batten / PVC conduit point wiring aluminium / copper from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets,bell push , ceiling rose, pendants, Holders, etc complete all as specified and directed.

M & L for One light / Fan / Bell point controlled by one switch 6 / 5 Amp one way single pole concealed point wiring on wall and ceiling / roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 20 mm dia with all conduit accessories / fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and laminated sheet 3 mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris / Putti or distemper / colour wash with same existing colour surfaces complete all as specified and directed.

All as per item No 230 above but One 3 pin socket outlet 6/5 Amps controlled by one switch on the same board with other switches.

All as per item No 230 above but One 3 pin 6/5 Amp socket outlet controlled by one switch independent board.

All as per item No 230 above but One 3 pin 6/5 Amp socket outlet controlled by one switch independent board but below/ side the switch board of light point in same vertical / horzintal plane.

All as per item No 230 above but for power point wiring with 4.0 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

All as per item No 230 above but One 3/5 pin 15 Amp socket outlet controlled by one switch indep board but below/ side the switch board of light point in same vertical / Horzintal plane

S&F switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified and directed.

S&F switch piano flush type (ISI marked), single pole, one way 16/15 Amps, 240 Volts including complete all as specified and directed.

S&F socket outlet 3 pin, 6 Amp piano flush type including complete all as specified and directed.

S&F socket outlet, 2 in 1, 3/5 pin 6 / 16 Amp, piano flush type complete all as specified and directed.

S&F bell push 5/6 Amps SP flush type complete all as specified and directed.

S&F ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals complete all as specified and directed.

S&F for batten angle lamp holder insulated body with back plate suitable for batten fittings including complete all as specified and directed.

S&F in repair Ding dong sound door call bell electric AC 240 volt, 50 Hz ding dong type including taking down unserviceable complete all as specified and directed.

Supply & Fixing medium step type fan regulator 80 Watt, 240 Volt AC, socket size, medium step" ISI marked complete all as specified and directed.

M & L for sub main wiring in replacement of worn out aluminium conductor wire with two run of FR PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 6.0 Sqmm, 1100 Volts grade and one run of 4.00 Sqmm FR PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments and drawing in PVC rigid conduit , connecting incoming / outgoing electric connections by using required size copper lugs / thimbles and making good the disturbed surface to match with existing complete in all respect complete all as specified and directed. Note :- 1. Two run of single core cable with one run of contineous earth wire of & conduit shall be measured and paid as one unit length.

M & L for sub main wiring in replacement of worn out aluminium conductor wire with two run of FR PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 4.0 Sqmm, 1100 Volts grade and one run of 2.5 Sqmm FR PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments and including draw in PVC rigid conduit 25 mm dia , connecting incoming / outgoing electric connections by using required size copper lugs / thimbles and making good the disturbed surface to match with existing colour (distumber, Oil bound, Samosem etc) complete all as specified and directed. Note :- Two run of single core cable with one run of contineous earth wire & conduit shall be measured and paid as one unit length.

S&F service connection with twin core 10 Sqmm 240 volt heavy duty un armured PVC insulated solid aluminium conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connection. in replacement of old unseriveable conductor cable complete all as specified and directed.

S & F service connection with twin core 6 Sqmm 240 volt heavy duty un armured PVC insulated solid aluminium conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connection in replacement of old unseriveable conductor cable complete all as specified and directed.

Supply & Fixing in replacement of DB by SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way complete all as specified and directed.

Supply & Fixing in replacement of DB by SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 12 way complete all as specified and directed.

Supply & Fixing in replacement of DB by TPN Distribution Box vertical, double door of protection grade IP 43 provn for 4 Pole MCCB frame upto 200 Amps , upto 50 KA breaking capacity as incomer in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of way, confirming to IS 13032 & 8623 including chasing/cutting of wall and concealed and making good as existing surface complete all as specified and directed.

Supply and fix in repair MCCB 125 Amps 16 KA with fixed thermal magnetic release frame 4 pole complete all as specified and directed.

Supply and fix in repair MCCB 100 Amps 16 KA with fixed thermal magnetic release frame F2 optim 1.0, 4 pole complete all as specified and directed.

Supply & Fix in repair MCB SPN, 5 to 40 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

Supply & Fix in repair MCB SP, 06 to 40 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

Supply & Fix in repair MCB TPN, 63 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

Supply & Fix in repair wall mounted LED batten 18 / 20 Watt with 01 No LED tube rod, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver including dismantling taking down unsv FTL fitting T8 type any type complete all as specified and directed.

Supply & Fix in repair LED building security light 35 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade suitable size dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismentling taking down unsv fitting any type complete all as specified and directed.

Supply and Fix LED lamp 10 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismentling taking out unsv CFL/LED Bulb, complete all as specified and directed.

Supply and Fix LED lamp 15 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismentling taking out unsv CFL/LED Bulb, complete all as specified and directed.

Supply and installed steel tubular swaged pole type 410 SP - 31 (9 mtr long) complete with MS base plate of size 300 x 300 x 6mm thick at bottom, welded at the centre with through hole of 14mm dia at a height of 300mm above the coping finial cap and painted with two coats of aluminium paint over a coat of red oxide primer with writing number including excavation upto required depth and PCC type C-2 1:3:6 (using 40mm graded) at bottom and PCC type B-1 1:2:4 (20mm graded) for mass filling and pole coping (60x60x30cm) and rendering of coping with 10mm thick in1:6 cement mortar including taking down old pole complete all as specified and directed.

M & L for PCC 1:4:8 type D2 using stone aggregate of 40mm nominal size in foundation concrete for pole / strut complete all as specified and directed.

M & L for PCC 1:3:6 type C2 using stone aggregate of 40mm nominal size in foundation concrete for stays complete all as specified and directed.

M & L for PCC 1:3:6 type C1 using stone aggregate of 20mm nominal size in foundation concrete for coping of poles complete all as specified and directed.

S&F GI tubing 80 mm bore light grade for cable protection on pole / trench incl dismentling taking down unserviceable one, complete all as specified and directed.

All as per item No 265 above but 40 mm

All as per item No 265 above but 50 mm

M&L for painting of steel tublar/rail pole 09/11 meter long with silver aluminium paint of two coat after preparing surface & Marking number on pole with black paint complete all as specified and directed.

Supply and fixing in replacement of 60 W LED Street light fitting having epoxy powder coated pressure die cast aluminium housing front cover with polycarbonate lens with silicon gasket, with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant.IP lens for better distribution and toughened glass fixed to housing with screws , street light should have IP 66 protection and impact resistance of IK 07 , Lumen efficiency of LED not less than 110>_ lumen per watt system efficency ,power factor >0.95, THD<10% at Full load CRI> 70% ,Street light should have built in potted DriverTHD, open circuit protection , over voltage protection , surge voltage protection 5KV in built & 10KV SPD , and provided with company LOGO ingraved on housing of the Street light complete including taking down of old UNSV fittings complete all as specified and directed. Note :-The contractor should take approval of techincal specification of luminaries and driver from department before procurement.

Supply and fixing in replacement of 90 W LED Street light fitting having epoxy powder coated pressure die cast aluminium housing front cover with polycarbonate lens with silicon gasket, with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant.IP lens for better distribution and toughened glass fixed to housing with screws , street light should have IP 66 protection and impact resistance of IK 07 , Lumen efficiency of LED not less than 110>_ lumen per watt system efficency ,power factor >0.95, THD<10% at Full load CRI> 70% ,Street light should have built in potted Driver THD, open circuit protection , over voltage protection , surge voltage protection 5KV in built & 10KV SPD , and provided with company LOGO ingraved on housing of the Street light complete including taking down of old UNSV fittings complete all as specified and directed. Note :-The contractor should take approval of techincal specification of luminaries and driver from department before procurement. .

Supply and fixing in replacement of 45 W LED Street light fitting having epoxy powder coated pressure die cast aluminium housing front cover with polycarbonate lens, with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant.IP lens for better distribution . street light should have IP 66 protection and impact resistance of IK 07 , Lumen efficiency of LED not less than 100>_ lumen per watt system efficency ,power factor >0.95, THD<10% at Full load CRI> 70% ,Street light should have built in potted IP 66 electronic LED driver with APFC, lower THD, open circuit protection , over voltage protection , surge voltage protection 5KV in built & 10KV SPD , and provided with company LOGO ingraved on housing of the Street light complete including taking down of old UNSV fittings complete all as specified and directed. Note :-The contractor should take approval of techincal specification of luminaries and driver from department before procurement .

Supply and fixing in replacement of 120 W LED flood light fitting having epoxy powder coated pressure die cast aluminium housing front cover with polycarbonate lens with silicon gasket, with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant.IP lens for better distribution and toughened glass fixed to housing with screws , flood light should have IP 66 protection and impact resistance of IK 07 , Lumen efficiency of LED not less than 110>_ lumen per watt system efficency ,power factor >0.95, THD<10% at Full load CRI> 70% ,Street light should have built in potted IP 66 electronic LED potted driver with open circuit protection , over voltage protection , surge voltage protection 5KV in built & 10KV SPD and provided with company LOGO ingraved on housing of the flood light complete including taking down of old UNSV fittings complete all as specified and directed. Note :-The contractor should take approval of techincal specification of luminaries and driver from department before procurement

S&F Post top energy saving 240V,50Hz AC, environmental friendly, aesthetically designed electronic constant current,IK07, having epoxy powder coated pressure die cast aluminium housing Top cover spun Al sheet powder coated,front cover Clear acrylic diffuser with indirect symmetrical light distributio, IP-65 luminaire with high power LED as light source of capacity 40 Watt, 5700K PF >0.9, THD<10% and light efficiency 85>_ ,CRI > 70,Surge protection 5KV incl dismentling taking down unsv fitting any type complete all as specified and directed.

Supply and fixing security light Bracket made out of galvanised steel light grade pipe of 40mm dia 1.5 mtr long bend to an angle of 120 degree with 02 Nos clamp made out of 50mm x 5mm flat iron and 06 sets of nuts, bolts and washers painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Note - including taking down old and unsv.

S&F in replacement wheather proof pole mounting junction box, base and door of junction box made out of SMC having outside dimention 333x233x120mm, inside dimention 300x200x105mm , single door front openable provided with hinged cover and locking arrangements with 4 Nos aluminium bas bar 63 Amps, mounted on porcelin insulator including M&L for MCB SP 10-1No, fixed on box in Din rail complete with electrical connection fixed to pole with suitable size FI clamp nut bolts and washer including embossing/painting of danger notice of size not less than 10cm x 7.5cm with letters, figures and conventional skull and bones in signal red colour on front face of junction box body complete all as specified and directed.

S&F PVC insulated, PVC sheathed twin flat core 1100 volts grade, 4 sqmm aluminium stranded conductor from OH conductor or from junction box to street/security light complete all as specified and directed.

Taking down and refixing after recify the defects carefully of ceiling fan any size and any sweep including dismantling of blades, down rods fan for recognize defects at site or deposit to store complete all as specified and directed.

Taking down and refixing after recify the defects carefully of exhaust fan any size and any sweep including dismantling of blades, for recognize defects at site or deposit to store complete all as specified and directed.

M & L for overhauling of ceiling fan any Make and sweep including dismantling, cleaning internally and externally, oiling, greasing, checking of electric connections, replacement of worn out check nuts, split pins, nuts, bolts and washers, sockets rebber real, clamps and minor repairing works and items etc. reassembling and testing on completion complete all as specified and directed. Note :- Winding works will be taken seperatly

All as per item No 279 above but for exhaust fan/wall fan/fresh air fan etc of any Make and any size.

M&L for Removing the burnt copper winding of ceiling fan ,cleaning to cores and rewinding of ceiling fans with copper enameled wire of suitable size including film paper, sleaving and varnishing , (1200/1400mm) complete any make any type complete all as specified and directed.

All as per item No 281 above but exhaust fan 12” sweep(300 mm) dia

All as per item No 281 above but exhaust fan/ fresh air fan 9" (250mm) dia

All as per item No 281 above but Wall fan 12'' /15" (300 mm/350 mm) dia

Renewal of ball bearing 6201ZZ size where required complete all as specified and directed.

All as per item No 285 above but 6202ZZ

All as per item No 285 above but 6203ZZ

Replacement of condensor 2.5 MFD where required and directed for ceiling fan, complete all as specified and directed.

Replacement of condensor 4.00 MFD for exhaust fan where required complete all as specified and directed.

Renewal of Gun metal bush where required as directed for ceiling fan or exhaust fan complete all as specified and directed.

Renewal of shaft suitable for any make of ceiling fans and exhaust fans complete all as specified and directed.

Supply and fix of exhaust fan louvers as per existing size in the site, complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth and getting out in hard / dense soil complete all as specified and directed.

M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation complete all as specified and directed. Note: Punned thickness shall be considerd for measurment purpose

M & L for brick work with fly ash bricks as per IS 12894 -2002 laying in trenches perpendicular to axis of the cable complete all as specified and directed.

Boring/ drilling (Horizontly) manually/ mechanically under existing road max 10 M in depth) suitable for passing GI Tubing 40 to 100 mm bore complete all as specified and directed.

Supply, laying jointing and testing LT UG cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured IS 7098 marked, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 sq mm 3.5 core, laid in trench/laid under floor or fixed naked with wall/on wall/in ducts/in GI pipes etc. with and includings MS Clamps, nuts,bolts,washers including taking down old cable complete all as specified and directed. Note- Excation, earth works,and sand cushioning, protection bricks and pipe shall be measured and paid seprately under given items.

All as per item No 297 above but size 35 sqmm 3.5 core

All as per item No 297 above but size 95 sqmm 3.5 core

All as per item No 297 above but size 16 sqmm 4 core

All as per item No 297 above but size 10 sqmm 2 core

Supply and fix in replacement three phase automatic street light switch suitable for 8 KW load complete with two numbers infrared sensor based NATURE SWITCH for automatic switching of street/security lights with one number four pole power contractor 63 Amps (Type MU40-2P,Cs90119) with coil voltage 220/240 V and incoming MCBs single pole - 03 No, out going MCBs single pole - 03 No of rating 32 Amps & circuit wiring with single core multistranded of size 10 sq mm lighting switch operation should be based on natural light lux level, Required lluminance level for switching ON is < 30 Lux. The sensor (one service and one stand by) should also have part night operation facility for 4,5,6---------11&12 hours. The sensor along with suitable power contractor (S), incoming and out going MCBs should be enclosed in a pole/wall mountable enclouser made of Rust proof, Electric shock proof,termite proof and FR grade confirming to IP66 complete all as specified and directed.

S&F GI tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, 25 mm bore with and including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches, fixed as in repair including dismentling taking down old unserviceable one complete all as specified and directed. (Note: Exacavation and earhwork shall be measured and paid for separately.)

All as per item No 303 above but of size 40 mm bore

All as per item No 303 above but of size 50 mm bore

Blank

Blank

S&F Bronze gate valve for 25 mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778 : 1984, fixed as in repair including dismentling taking down old unserviceable one complete all as specified and directed.

All as per item No 308 above but of size 40 mm bore

Blank

Blank

Supply and fix LED tube rod 18 / 20 Watt 4 fit retro T5 / T8 complete all as specified and directed.

M & L for Earthing complete with galvanised steel earth plate electrode 6mm thick of size 600x600 mm buried directly and vertically in ground with top edge of the plate not less than 2.25 mtr from GL, connected with galvanised iron strip 32x6mm all as shown in Plate No-3, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx50mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 50 mm dia light grade GI tubing for protection of GI Strip 32x6mm, charcoal and salt in alternate 150mm thick layers around GI earth plate, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion

Supply & Install, testing and commissioning of electrical operated single phase, water storage heter (Geyser) of capacity 25 ltr complete having stainless steel inner tank, in let / outlet provn and safty devise etc alongwith 3 core copper cable with plug top 15 Amp AC 230 V complete incl dismentling and taking down unsv one and deposit to MES Store Yard, complete all as specified and directed. (Note : Geyser will be fitted with fastners-04 Nos including bolts wastrs etc and making good disturbed surface all as direcetd)

S&F 1200 mm sweep Ceiling fan 230 Volts complete with, down road, canopy and fitting & fixture including taking down old fan & deposited in the store yard complete all as specified and directed.

S&F plastic body exhaust fan of size 300 mm sweep incl dismentling and taking down unsv one and deposit to E/M Store complete all as specified and directed.

S&F recessed / surface mounted LED round slim & elegant downlight panel for indoor application with high aesthetic appeal for soothing light CCT 6K 10 Watt .all as per exisiting size and shape including dismantling taking down unsv fitting any type complete all as specified and directed.

S&F Polycarbonate meter fixing case of size 168X253X115 mm with transparent cover, IP 65 protection class with mounting plate including fixing of existing serviceable KWH meter and connection complete incl dismentling and taking down unsv one complete all as specified and directed.

S&F Cable jointing kit for 1100 V (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 25 to 50 sqmm XLPE armoured aluminium conductor, complete all as specified and directed.

S&F Cable jointing kit for 1100 V (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 70 to 95 sqmm XLPE armoured aluminium conductor, complete all as specified and directed.

S&F Cable jointing kit for 1100 V (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 120 to 150 sqmm XLPE armoured aluminium conductor, complete all as specified and directed.

S&F Cable jointing kit for 1100 V (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 185 to 340 sqmm XLPE armoured aluminium conductor, complete all as specified and directed.

Disconnecting all existing electric connection from panel taking out unserviceable MCCB and cable from LT panel Board and suppy & fix connecting and testing of MCCB 63 Amps 3 pole 25 KA 415 Volt 50 Hz with spreader with suitable size of cable lugs / thimble complete including all electric connection with making good complete all as specified and directed. Note - Rotary handle will be provide by contractor where required.

Disconnecting all existing electric connection from panel taking out unserviceable MCCB and cable from LT panel Board and suppy & fixing connecting and testing of MCCB 100 Amps 3 pole 25 KA 415 Volt 50 Hz with spreader with suitable size of cable lugs/thimble complete including all electric connection with making good complete all as specified and directed. Note - Rotary handle will be provide by contractor where required.

Disconnecting all existing electric connection from panel taking out unserviceable MCCB and cable from LT panel Board and suppy & fixing connecting and testing of MCCB 125 Amps 3 pole 25 KA 415 Volt 50 Hz with spreader with suitable size of cable lugs/thimble complete including all electric connection with making good complete all as specified and directed. Note - Rotary handle will be provide by contractor where required.

Disconnecting all existing electric connection from panel taking out unserviceable MCCB and cable from LT panel Board and suppy & fixing connecting and testing of MCCB 250 Amps 3 pole 25 KA 415 Volt 50 Hz with spreader with suitable size of cable lugs/thimble complete including all electric connection with making good complete all as specified and directed. Note - Rotary handle will be provide by contractor where required.

Disconnecting all existing electric connection from panel taking out unserviceable MCCB and cable from LT panel Board and suppy & fixing connecting and testing of MCCB 400 Amps 3 pole 25 KA 415 Volt 50 Hz with spreader with suitable size of cable lugs/thimble complete including all electric connection with making good complete all as specified and directed. Note - Rotary handle will be provide by contractor where required.

S&F Hose pipe for fire fiting of 100 MM complete all as specified and directed.

Supply only Bleaching powder stable grade-I conforming to IS specification 1665/89 (second revision) minimum available chlorine percentage lay mass 34% (+) (-) 1% in 25 kg polythene HDPE bags duly marked date of manufacturing and batch No of fresh lot Note- The bleaching powder supplied by the contractor shall be got tested by the department for each lot from Govt reputed lab.The cost The charge for testing shall be borne by the contractor and cost of the same shall be deemed to be included in the rate quoted.

Chlorine test kit to measure chlorine 0.2 to 5 PPM complete all as specified and directed.

M&L for removing existing sludge from reservoir and depositing the sludge up to 100 Mtr distance and cleaning, scraping down deposit from floor and wall, washing the walls / floor with bleaching powder in the reservoir of following capacity, including writing work with synthetic enamel paint on the wall (capacity, date of cleaning, date of next cleaning, location etc.) 0.10 Lakh Gallons at High Level water supply installation complete all as specified and directed.

Supply and fixing in repairs Brass Handle valve (wafer type) lever operated class PN-1.0, S.S-304 Disc, Nitrile/EPDM rubber lining including making new flanged joint with 3mm thick rubber gasket (Packing ring) with necessary bolt, nuts and washer suitable for 25 mm dia complete all as specified and directed.

All as per item No 332 above but 32 mm dia

All as per item No 332 above but 50 mm dia

All as per item No 332 above but 80 mm dia

Supply and fixing in repairs non return valve, CI of required dia 100/80 mm complete all as specified and directed.

Supply and fix in replacement bollard light 1 Mtr long 10 - 12 watt LED Bollard light having epoxy powder coated pressure die cast aluminium housing Light optic / Diffuser - High impact polycarbonate/Optic colour temprature 5700K CRi>70,THD<10% PF >.90 surge protection 4KV inbuilt ,Rated voltage and frequency 240 Volt,50 Hz street furniture with touch if aesthetic innovative design with uniformly lit diffuser at the upper portion acts a beacon of path guidance in a landsscape IP 65 environmental complete with foundation work nut,bolt and washer etc complete all as specified and directed.

Supply and fixing Street light fitting electronic constant current drivers/PCB/electronic gear suitable for 45 to 90 Watt LED flood light/street light fitting as required at site or as per sample incl taking out old unserviceable complete all as specified and directed. Note - including taking down old and unsv.

Supply and fixing Street light fitting electronic constant current drivers/PCB/electronic gear suitable for 120 to 150 Watt LED flood light/street light fitting as required at site or as per sample incl taking out old unserviceable complete all as specified and directed. Note - including taking down old and unsv.

Supply and fixing Street light fitting electronic constant current drivers/PCB/electronic gear suitable for 200 Watt LED flood light/street light fitting as required at site or as per sample incl taking out old unserviceable complete all as specified and directed. Note - including taking down old and unsv.

Taking down carefully and re fixnig after rectifying the defects of storage type water heater (Geysers) of 25/50 ltrs capacity and mechanically from all existing line, opening for inspection back plate of any make/ type and from any height and re-fixing after necessary repair/ replacement of unserviceable parts complete all as specified and directed.

Supply and fixed heating element 1500 watt push/screw/ triangular type suitable for 25 ltrs capacity geysers ISI marked complete all as specified and directed.

Supply and fixed heating element 2000 watt push/screw/ triangular type suitable for 50 ltrs capacity geysers ISI marked complete all as specified and directed.

Supply and fixed thermostat switch suitable for 25/50 Ltrs capacity geyser of any make/ type with temperature range adjustable from 25 to 90 degree centigrade superior quality 20 Amp rating 220 volt AC supply complete all as specified and directed.

Supply and fixed PVC flexible connection with two brass adopter as per existing samples/ suitable of carrying hot water/normal fixed one end at geyser inlet / outlet water supply point complete all as specified and directed.

Supply and fixing indicator lamp suitable for 220 volts AC supply circular/ rectangular (green/ red) as per sample with neon lamp of superior quality complete all as specified and directed.

Painting of Geyser of any size with existing colour enameled approved spray paints one coat after cleaning dust etc complete all as specified and directed.

GIAN ENGINEERS