Loading…
Loading…
| # | Company |
|---|---|
| 1 | 3 Y OUR PRICE BID OPENED ON 02 03 2024 4 C ORRIGENDUM I DATED ON 24 02 2024 5 |
Tender Value
₹18.8 Cr
EMD Value
₹18.8 L
Closing Date
20 Apr 2023, 11:00 amClosed
Civil Work, Partition Wall, Painting, Ceiling and Flooring, electrical, Furniture, Air-condition/VRV, IT works, EPBX, and Plumbing works etc.
NSL/CEO/WTC/NHIDCL/NIT/2023/555
NSL/CEO/WTC/NHIDCL/NIT/2023/555
Open Tender-Domestic
Civil Works General
New Delhi, Delhi
₹11,800
₹18.8 L
1 Apr 2023
1 Apr 2023
20 Apr 2023
20 Apr 2023
25 May 2023
Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and shuttering-all work upto plinth level.
4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) cu m 260.00 6326.05 1644773.00
Providing and laying machine cut, mirror polished, Italian Marble brass brass inlay stone flooring laid in required pattern in linear portion of the
building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1
1.02 11.51 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment
to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
11.51.1 18 mm thick Italian Marble stone slab in all colour and shade sq m 1565.00 6095.50 9539457.50
Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize
design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at
1.03 11.53 the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in- sq m 100.00 3282.50 328250.00
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
11.56 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing,
curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
11.56.1 Polished Granite stone slab colour of Blue Pearl, Black Pearl or equivalent sq m 1805.00 3908.80 7055384.00
Providing and fixing removable raised/false access flooring with systemand its components of approved make for different plenum height with
possible height adjustment upto 50 mm, comprising of modular loadbearing floor panels supported on G.I. rectangular stinger frame workand G.I.
Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of:
(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer
diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size
75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment
upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through
base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.
(b) Stringers system in all steel construction hot dipped galvanized ofrectangular size 570x20x30x0.80mm thick having holes at both ends for
securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by
the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the
11.54 system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as
per the architectural drawings, as specified and as directed by the Engineer-in-charge.
(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade
(FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The
top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20
welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate
is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory
finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within
0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel
which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of
50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed
on the side of the panel to ensure the quality of the product.
11.54.2 450 mm Finished Floor Height (FFH). sq m 280.00 5407.15 1514002.00
Supply of 100 mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thickness 1.30 to 1.50mm. Designed to conceal
1.07 MR screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket. metre 1200.00 286.00 343200.00
TOTAL FLOORING WORKS 20081866.50 343200.00
2 FALSE CEILING WORKS
Digitally signed by AMIT
SINGH 20:48:33 IST
S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE
DSR ITEM NON DSR ITEM
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S.
sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x
1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x
50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required
size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to
which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to
centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.
2.01 12.45 wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of
ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of
gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and
finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing
compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's
specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels
suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with
12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) Sqm 1500.00 1145.95 1718925.00
BAFFLE CEILING: Providing & Installation of Baffle ceiling system comprises of 50 mm x 100 mm (50 mm width & 100 mm Height) U Shape
panels in RAL color finish. Panels shall be made of 0.5 mm thick galvanized steel after Powder-coated and length up to 4000 mm. Panel shall be
high corrosion resistance and good color stability. Centre to Centre panel gap will be 150 mm. Panels are fixed on to roll formed carriers 20 mm
2.02 MR wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated color with cutouts to hold the panels in module of 50 mm at maximum 1200 m c/c. Sqm 150.00 4214.00 632100.00
Carriers are suspended from the roof or truss by 6 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at
max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are factory cut in lengths up to
maximum 4.0 m to suit site dimensions or shop drawings. Top cap and side cap are used to cover the edges of the panels.
STRETCHED FABRIC CEILING: Supply & installationof fabric false ceiling / wall formed out with TRANSLUCENT Printed fabric coverings made
out of polyester knitted fabric coated with Polyurethane (PU). The TRANSLUCENT Printed fabric width of 2m, 3m, 4.1m &5.1m with weight of
200gm/m2, thickness of 0, 3 mm. The appearance of fabric is matt, smooth and uniform with blanq color and light transmission of 50%. The tear
strength of fabric should be accordance to CH: 4,5daN; TR: 6,5 daN. The fire rating should be accordance to B-S1, d0. The fabric should be
humidity resistant and free of carcinogenic substances(CMR) or volatile organic Compounds (VOC’s). At labeling in accordance with the French
decree no. 2011- 321, Oeko-Tex standard100 certified. Fabric should be installed with approved manufacturer guidelines. It comes with 10- year
manufacturer guarantee. The installation of TRANSLUCENT Printed fabric should be dry installation & done at room temperature using CLIPSO
2.03 MR PVC, ABS Grippers. Clipso ceiling base to be made of MS or Wooden frame finishing to a flush finish of tapered and square edges in desired Sqm 215.00 8500.00 1827500.00
design as per architect specification.Supply of LED Lights behind the Fabric Wall/ False ceiling in modules/ PCB with recommended wattage as
per manufacturer's standards to give an effect of ambient lighting. LED spacing / Pitch should be atleast 73 -80mm with beam angle of 170 degree,
Colour temperature shoud be as per design intent 3000K/4000K/6000K. Wattage of 8-10W/mtr. LED modules/ PCB should be positioned properly
to provide an even light flow, casting noshadows or dark spots. LED Driver Cost included.
Providing and fixing GI Plain 75mm wide x15mm deep panel upto 6mtr, shall be roll formed out of 0.5mm thick Powder Coated .The top coat of
panel shall be 60 micron polyester coated finish in approved colour. The panel shall be factory cut in up to 6Mtr OR required length. Accessories
2.04 MR Detail: Carrier: 63mm deep, made out of 0.6mm thick steel backed with enameled black paint having cut out to hold on panel in a module of 75mm Sqm 75.00 3689.00 276675.00
closed. The joint of two carriers shall be joined by means of carrier splices maintaining a module of 75mm .4mm dia galvanized rod with special
height adjustment butter fly clips made out of SS steel sheet. The edge profile G.I.shall be matching with the panel.
Digitally signed by AMIT
SINGH 20:48:33 IST
S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE
DSR ITEM NON DSR ITEM
Providing & Fixing of Fibre Glass Acoustical Suspended Ceiling System with 20/25mm thick Microlook 90 Edge Tiles with Silhouette 15mm face
exposed grid. The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95%, NRC 0.85 – 0.95 (Average value of Absorption
Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, Light Reflectance ≥88% as per ASTM E-1477,
Colour Pebble White, Fire Performance of Class 0/1 as per BS 476 Part 6/7 with 20/25mm Square Tegular/Microlook 90˚ edge and 8mm drop in
module size of 300 x 1200mm. It shall be suitable for Green Building application, with Recycled content of 85%. SUSPENSION: The tile shall be
laid on grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour with mitred ends & “bird’s mouth” notches to
provide mitred cruciform junctions colour global white. Grid shall have double stroke rotary stitching on all T sections i.e. the Main Runner,
1200mm & 600mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 7.9 kg/m2 (as per standard
installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 9.5
kg/m. The end details of the cross tee shall be made of pre-hardened steel clip fixed to the ends of the cross tee to provide double locking between
“cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out
strength of more than 100kg. The T Sections shall be made of 90 gsm as per IS 277 (2003) pre-painted steel with baked polyester paint of 0T
bending capability.
INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using suspension system (specifications below)
at 1200mm maximum. The First/Last suspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall
along with the first and the last main beam shall be at less than 600mm from the wall. Flush fitting 1200mm long cross tees to be interlocked
between main runners at 1200mm to form 1200 x 1200 mm module. Cut cross tees longer than 600mm require independent support. 1200 x
300mm module to be formed by fitting 1200mm long flush fitting cross tees (with no mitre cut on cross tees) centrally between the 1200 mm cross
tees(Miter cut at every 300 mm). Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to
centre maximum. Installation shall be carried out as per Manufacturer recommended procedure.
SUSPENSION SYSTEM accessories supplied by Manufacturer consisting of M6 Anchor Fasteners with hanger hole, pre- straightened hanger
wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. (Optionally, adjustable
hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level
adjustment during installation purpose in main runners).
Providing and Fixing SoundScpaes Acoustical blades which are 40 mm thick, flat glass fibre panels with Humidity Resistance RH 90%, with
factory fitted embedded metal insert with ¼” – 20 threading for fixing cable adjuster for hanging application. Acoustical blades shall have sizes of
200x1200mm, 200x1600mm ,400x1200mm, 400x1600mm, 400x1800mm with both side laminated scrim finished with uniform water based paint
on all surface (including edges). Acoustical performance of 0.65 NRC(for 400mm high x 40mm thick baffles with 400mm on centre distance and
overall depth of construction 1000mm) as per ASTM C-423 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz
and 2000 Hz) in standard White color with Light reflectance 87% or in the color specified by the Architect (Shell / Tangerine / Cranberry / Moss /
Kiwi / Reef / Lagoon), Fire Performance Class B2 – s1, d0 as per EN 13501-1 .The blade shall be made of Glass fibre panel with density of 110-
120 Kg/ m3. SUSPENSION: The Soundscapes Baffle shall be installed at a Centre to centre distance of 200mm The panel shall be hung using
hanging kit comprising of griper structure anchor & cap of dia 20mm, spring loaded bottom end cable adjuster of dia. 9mm and 2.4m long aircraft
cable of 1/16” dia. Components 1) Griper structure anchor 2) Gripper anchor cap 3) Cable adjuster 4) Aircraft Cable Cable adjuster Spring loaded
2.07 MR bottom end cable adjuster of dia. 9mm and 45mm long Aircraft cable Material Galvanized Steel Aircraft cable dimension 1/16” Ø x 2.4m Tolerance sq m 100.00 17491.00 1749100.00
±1mm. INSTALLATION: Hanger Wire Attachment to Structure: Attach the gripper structure anchor to the structure with an appropriate fastener
(1/4"-20 Threading) that will carry the full weight of the blades. Insert the end of the cable into the gripper anchor cap. Screw the gripper anchor cap
completely into the gripper structure anchor. Insert Suspension Cables: The panel is to be suspended using the aircraft cables which are
suspended from the soffit using the gripper structure anchors and its other end passing through the bottom end cable adjuster. The height & level
of the panels can be adjusted using the bottom end cable adjusters.Suspension of Blade: Locate the two factory fitted female inserts on the blades.
Suspend the Blades by screwing the bottom end of the cable adjuster into the female inserts. Installation should be carried out as per Manufacturer
recommended procedure.
Providing & fixing of planks - 600mmx1200mmx25mm thickness made out of wood wool fibre of width 1 mm thickness mixed with white portland
cementwith 5mm CNC groove as per architects design. TOTAL CONSTUCTION height of 200mm minimum from the true slab. Panels to be
fixed on framework made out GI (0.60mm thick & 60 MM Width) sections to form a section of 600mmx600mm. Celenit panels to be fixed on the
Slabs using UNIVERSAL BRACKET with a minimum of 50mm to 100mm void or gap with Galvanized screws of length 50 mm & Dia 4.5 mm.
Mineral Wool of density 50 kgm3 density (30mm thick) to be back filled.Thermal and acoustic insulation board, consisting of mineralized extra-thin
2.08 MR fir wood wool bound with white Portland cement. Wood wool is 1 mm wide. High quality boards for design acoustic absorption systems.It complies sq m 200.00 5600.00 1120000.00
with EN 13168 and EN 13964.The boards are certified by ANAB-ICEA and natureplus for eco-compatibility of materials and manufacturing
process. CELENIT ABE is PEFC™ certified. Also available with FSC® certificationSound absorption value NRC : upto 0.90. Reaction to fire acc.
to EN 13501-1: B-s1, d0. EC Conformity Certificate Reg. No.: K1-0751-CPD-209.0-02-01/2011.
Digitally signed by AMIT
SINGH 20:48:33 IST
S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE
DSR ITEM NON DSR ITEM
Providing of Ecoresin panel of size 1220mm x 2440mm with variety of inlay between panels of specified Gauge. The panels are made from
ecoresin sheet with engineered polyester resin with a thickness of 6 / 9.5 mm (+/- 5%)with a top/bottom finish as sandstone finish. The product
conforms to Class A impact rating in accordance with ANSI Z97.1-2004 at 1/8” thickness, has no detectable VOC off-gassing as measured under
ASTM standards D 5116 and D 6670, is GreenguardTM Indoor Air Quality certified and has a minimum of 40% post-industrial recycle content
2.09 MR certified by a recognized 3rd party certification group, such as Scientific Certification Systems (SCS). The design of the product is based on Varia each 4.00 314004.00 1256016.00
produced with ecoresinTM as approved make of Hunter Douglas as per specification & approval of Engineer-in-charge as per tender drawing.
TOTAL FALSE CEILING WORKS 1718925.00 10202911.00
3 WALL FINISHES WORKS
Supply and installation of Aluminium Framed Glass Partition for Access and Cabin System for minimal frame, room dividing solutions. Single
glazed mullion free demountable glass partition using Toughened/ Laminated glass in proprietary natural anodised/ Black aluminium sections ALT
50 of size 50mmx30mm with Concealed sealing (No visible Gaskets/ Seals) with acoustic rating of Minimum 32 db with third party test certificate.
The profile will have Carpert Groove at the bottom on both sides for accomodating max. 8mm carpets. The Glass to be fixed with help of
3.01 MR proprietary stability GRIPPER Clamp to have a stable system. It should consists of intermediate slim junction profiles for Glass to Glass vertical Sqm 155.00 5401.00 837155.00
joints, 90 Degree L Junction and T Junction profiles suitably to be used as per room configuration designs. No VISIBLE Clip Lines to provide clutter
free view at both side of section. The Glass to be offset mounted towards outer edge leading to minimum aluminium frame on one side. Optional
Profile Bottom Seal pair for additional accoustic. Glass thickness-10 (LSG) shall be included in the product.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or
3.02 with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
9.1.1 Second class teak wood cu m 2.00 131576.95 263153.90
Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc.
3.03 including priming coat complete.
8.27.1 Kiln seasoned and chemically treated hollock wood cu m 5.00 163814.10 819070.50
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame
9.21 of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of
3.04 shutters:
9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 32.00 2015.75 64504.00
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter
to be measured).
Providing and Fixing 22x922 mm D-type Handle Material : Stainless Steel. Finish : Satin Stainless Steel (SSS). of approved make and model all
complete as per the direction of Engineer-in-charge.
Providing and Fixing SS Mortise Lock Body SB/TB for door thickness 25-50 mm for of approved make and model all complete as per the direction
of Engineer-in-charge.
Providing and Fixing Double cylender Floor Spring- with Closing Force EN 3 with Maximum door weight 105 Kg. Maximum door width
950mm.Closing speed : 130°
Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested with 5 Years
Warranty against manufacturing defect. CE certified for wooden doors all complete as per the direction of Engineer-in-charge.
Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in
3.09 9.53 cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). Each 78.00 194.35 15159.30
Providing and Fixing top and Bottom Strap of approved make and model all complete as per the direction of Engineer-in-charge.
Providing and Fixing Dead lock Back set- 50 mm with Key Hole of approved make and model all complete as per the direction of Engineer-in-
Providing and Fixing 60 mm SS Cylinder One side knob and one side regular key (3 key) for wooden doors of approved make and model all
complete as per the direction of Engineer-in-charge.
Digitally signed by AMIT
SINGH 20:48:33 IST
S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE
DSR ITEM NON DSR ITEM
Providing and Fixing Double cylinder Floor Spring with Top-Bottom Patch,pivot and Bottom Patch Lock Maximum door weight 100 Kg. Maximum
door width 1000 mm.Closing speed : 120°,Final closing speed : 15-0°. Hold Open (standard): 90° hold open.Suitable for 10-12 mm glass
Weight of floor spring approx : 6kg
3.13 MR 5 Years Warranty against manufacturing defect with 5,00,000 cycles Tested approved make and model all complete as per the direction of Each 81.00 9990.00 809190.00
Engineer-in-charge.
Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top &
3.14 21.18 bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all Sqm 220.00 2516.37 553600.63
complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on glass
with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having minimum tensile strength of 3.5
pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate:
MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) must be endorsed by 3M India Limited Architectural Market Department.
Contractors payment wouldn't be released until & unless he/she produces orginal warranty certificate from the manufacturer.
Providing and fixing Bollard Channelled woodwork acoustic wall panel of width of 192/132/128mm with finishing of 15 mm thick Grooved wooden
acoustic panel of size 2420 mm, Groove Size 3.2mm at an interval of 21mm/28 mm c/c as per acoustic design / Architects’ approval, the wooden
3.16 MR acoustic panels to be backed with black acoustic fleece with NRC of 0.45 (NRC 0.8 with 50mm GW of 48kg/m3).the edge of panel shall be Tounge Sqm 435.00 3858.00 1678230.00
and groov to be fixed with clips on aluminium profile designed specially fo the panel. the panel will be mounted with the help of clips on Bollard
Aluminium extruded Keel. The grooved acoustic panel laminated in desired shade as per Engineer In charge / Architect’s approval.
Providing and fixing woodwork 16mm thick forming 600x600 mm tiles with Tegular edge. Perforation in the panel will be of 6mm/8mm/10mm or as
per architect approval, the wooden ceiling panels to be backed with black acoustic fleece with NRC of 0.4 (NRC 0.8 with 50mm GW of 48kg/m3).
The grid should be of 24mm/15mm wide T - section flanges color Black. The main T runner with length and size of 24X38mm/ 15X38mm made
from .30mm thick sheet spaced at 1200mm Centre to Centre and cross T of size 24X25mm / 15X25 made of .3mm thick of 1200mm long spaced
3.17 MR between main T at 600mm center to centre to form a grid of 1200X600mm and second cross T of length 600mm and size 24X25mm/15X25mm Sqm 435.00 3564.00 1550340.00
made of 0.30mm sheet to be interlocked at middle of the 1200X600 mm panel to form grid of 600X600mm and wall angle of size 19X20 The
Wooden acoustic panel laminated in desired shade as per Engineer In charge / Architect’s approval.
Providing and fixing of 6 mm thick premium GRIHA rated Lacquered glass of approved color by Architect/ Client / Customer, fixed with compatible
neutral grade silicon on a perfectly levelled 12mm thick water proof marine plywood / MDF / Mineral fibre board which is mounted on RCC wall/any
other structure. Lacquered glass must be made industrially (using curtain coating process); opaque (if viewed against a support wall), uniformly
3.18 MR coated with PU lacquer (50 micron thick coating or more); panel to panel colour consistency (measured by photo spectrometer); highly durable Sqm 485.00 4868.00 2360980.00
(passes hardness test for minimum 220 oscillations); humidity resistance (conforms to BS EN 1036 1999 or equivalent) ; environmentally
friendly having Low VOC (no lead, no arsenic, no copper, no formaldehyde), low VOC content <100g/l. Silicone used should not react with lacquer
coating (compatible neutral cure silicon)
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of
special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel
50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash
fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48mm wide having one
flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of
610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor
fastener or metal screws with nylon plugs at spacing of 450mm centre to centre, and fixing of boards to both side of frame work by 25mm long dry
wall screws on studs, floor and ceiling channels at the spacing of 300mm centre to centre. The boards are to be fixed to the frame work with joints
staggered to avoid through cracks, M.S. fixing channel of 99mm width (0.9mm thick having two flanges of 9.5mm each) to be provided at the
horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with
recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable
for board as per manufacturer's specification and direction of engineer in charge all complete.
75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095:
part 3 (Board with BIS certification marks)
Digitally signed by AMIT
SINGH 20:48:33 IST
S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE
DSR ITEM NON DSR ITEM
Providing & fixing of straight Paneling for walls & Columns structures anchored in floor slab & celling, cladded with Acrylic Solid Surface 12mm
thick sheets straight fabricated on a single face, finished in matte finish, pasted with industrial grade silicon on a robust substrate. Substrate shall
be with suitable MS box sections [Appx. 15 to 20 kg/ Sqm] as per structural requirement & duly painted with anti-rust red oxide coating and
3.20 MR covered with 12 mm thick water proof ply as per the design and dimensions approved. The proposal includes the cost of preparing appropriate Sqm 40.00 13363.00 534520.00
substrate surface over the civil structure provided, along with material cost & installation / fixing on straight walls etc. FOR ALL WALL CLADDING,
TABLE TOPS ETC. COMPLETE
Providing & supplying of Window Blinds per the approved sample Duette double honeycomb shades with easy rise operating system as per
following fabric specifications:
• Original Non-woven honeycomb shade shaving soft fabric appearance and high energy-efficient fabric with high tear strength constructed out of
Anti static, resilent, colour fast & Sanitized Treat 100% spun bonded non woven polyester fiber & precision manufacture to form a hexagonally
shaped duette pleat• Pleat dimension ¾ "Honeycomb within a Honeycomb” with 3 air pockets for maximum energy efficiency.
• Shadings are duotone, with neutral tone facing the exterior and color facing the interior The Head rail shall measure 49.68 wide and 36.66mm
deep & thick 1.27mm extruded from 6063 T6 alu. alloy& shall be powder coated to a smooth finish with a thickness of 40 microns. Fabric shall be
constructed from spun-bonded polyester fiber, precision manufactured to form a hexagonally shaped, dual pleat, cellular construction. All cords &
cord holes shall be fully concealed inside the fabric structure. As each of the hexagonal cells is formed individually, pleats operate independent of
3.21 MR each other providing superior pleat retention & structure strength. Installation brackets. shall be of high tension spring steel suitable for overhead & Sqm 50.00 16708.00 835400.00
wall mounting 30mm Duette Hartford mounting bracket. Head rail covered with Sydney Valance of height 80mm made up of Aluminium & L shape
moving Rail includes “Click & Engage" method of dimension 50mmX55mmsticked with integrated moving rail magnets provide a streamlined look,
reduce centre light gap, and promote easier operation. Polyster cord. Shall be 0.9mm in diameter & of woven hollow core end cap shall be molded
acrylic color matched to the head & bottom rails. Bottom rail shall be a single channel section, measuring 30mm wide and 12.5mmdeep &
thickness 1-1.2mm extruded from 5005 H-16 alu. Alloy & shall be powder coated with a smooth finish to a thickness of 15- 25 microns. Hold-Down
bracket (optional) shall be molded in clear acrylic. It incorporates a pin for engagement with the bottom rail end-cap. It shall be suitable for sill, face
or side facing. Cord Equalizer shall be injection melded from impact modified acrylic with a high flexural modulus
Providing & supplying of fabric venetian Window Blinds as per the approved sample, consisting of 3" vane size having head rail, rotator rail and
bottom rail made of aluminium alloy 6063-T6 PER ASTM B221 - 85 extruded profile, powder coated and provided in standard natural white color.
The rolling tube should be made up of aluminium alloy from extruded profile of 34mm dia. The head rail dimensions should be of suitable size
according to the length of head rail and space available and finished with fabric cover matching with the louver fabric. The cassette should conceal
the working mechanism rotary-clutch. (White polycarbonate spring tempered rotary clutch which raises), lower and tilts the blinds. White
polycarbonate limit assemblies control vane over-rotation, located on either side of individual blinds. The room darkening fabric of Blind should be
3.22 MR of anti-static polyester vanes which have facings between two sheer layers (50 mm wide) to reduce glare. Sheer layers should be of white 100% Sqm 598.00 17085.00 10216830.00
knit polyester, the colors, textures and opacities as approved. The fabric shall be made of spun- bonded 100% polyester fiber (having green guard
certification) treated with soil & dust repellent requiring minimum regular interval cleaning. GREEN GUARD Gold certified for low-emitting products
to maintain Indoor environment. Up to 80% ultraviolet protection with vanes open and 90% with vanes closed. The shading to be operated by Easy
rise mechanism with a continuous cord loop operating system. All parts, components & hardware are in approved shade as per direction of
Engineer-incharge.
PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in line with external glazing as per details of Architect.
Rate to include finishing exposed surfaces of the Pelmet with enamel paint of approved shade or 1mm laminate.
WINDOW CILL: Fabricate and install 250x200 (WxH), window cill along external windows. Cill to be constructed out of 18 mm MDF, finished with
3.24 MR 1mm. Thk laminate shade as per Architect’s approval. Cost to include edge margin in teak wood and poilshed in colour matching laminate. RM 240.00 1850.00 444000.00
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V
6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 475.00 1018.05 483573.75
3.26 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. Sqm 475.00 86.45 41063.75
13.4 12 mm cement plaster of mix :
3.28 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. Sqm 475.00 214.30 101792.50
Digitally signed by AMIT
SINGH 20:48:33 IST
S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE
DSR ITEM NON DSR ITEM
13.60 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :
13.60.1 Two or more coats on new work Sqm 3475.00 137.85 479028.75
Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden
3.30 /steel frame work, complete as per direction of Engineer-in-Charge
9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type Sqm 3865.00 1084.60 4191979.00
Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden
3.31 MR /steel frame work, complete as per direction of Engineer-in-Charge
4mm thick MDF Board Sqm 2900.00 600.00 1740000.00
Providing and fixing metal system up to ceiling height, which includes frame work made of special section power pressed/ roll form G.I. sheet with
zinc coating of 120 GSM, consisting of Boral U track 52mm wide having equal flanges of 30mm and 0.55mm thick (Base metal thickness) fastened
to the floor slab and ceiling soffit using rawl plugs with screw at 600mm centers, with first & last fixing point at not greater than 50 mm from either
3.32 MR end. Boral C studs 50mm wide having one flange of 34mm, other flange 36mm, lip size 6 mm and 0.55mm thick installed perpendicularly within the Sqm 550.00 955.12 525317.88
flanges of floor and ceiling channels located directly opposite to each other at not more than 610mm centers. Maintain 5 to 10mm gap between C
Stud and web of U Track.
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface
layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped
3.34 12.57 in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per Sqm 3865.00 307.35 1187907.75
directions of Engineer-in-Charge.
TOTAL WALL FINISHING WORKS 11872193.43 24326144.38
4 MISCELLANEOUS WORKS
Modular kitchen - Under counter storage cabinets:
Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient number of
drawers made of 18 mm thk. ISI Marked comm. ply, all ply to be laminated with 0.8 mm laminate.All shelves should be supported on approved
quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least 18mm thic with
laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss acrylic of approved. The cabinet boxes
4.01 MR of floor units will be supported by 100mm height vertical adjustable legs which will be covered with PVC skirting in brushed aluminum finish Sqm 49.00 20179.00 988771.00
attached by hardware of skirting. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and rawl plugs. Only front face
area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. Cabinet boxes size would be varies
from 400X560X710MM to 1000X560X710MM (approx.) and join together as per site requirements etc.
Modular Kitchen - Overhead storage wall units:
Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient number of
drawers made of 18 mm thk. ISI Marked comm. ply. All ply to be laminated with 0.8 mm laminate.All shelves should be supported on approved
quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least 18mm thic with
4.02 MR laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss acrylic of approved. The unit shall be Sqm 30.00 13452.00 403560.00
fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of
boxes shall be considered for measurement and payment. Cabinet boxes size would be varies from 400X560X710MM to 1000X560X710MM
(approx.) and join together as per site requirements etc.
4.02A MR Providing and fixing of drawer assembly with metal sides and quadro channels Each 22.00 3548.00 78056.00
4.02B MR Providing and fixing baskets Each 22.00 4013.00 88286.00
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions
including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with
4.03 22.3 water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying Sqm 65.00 774.25 50326.25
blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet
should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
TOTAL MISCELLANEOUS WORKS 50326.25 1558673.00
Digitally signed by AMIT
SINGH 20:48:33 IST
SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS
DSR NO S NO TOTAL AMOUNT TOTAL AMOUNT
DSR NO S NO TOTAL AMOUNT TOTAL AMOUNT
DESCRIPTION UNIT QUANTITY RATE
2021 DSR (INR) NON-DSR (INR)
Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN
MR 1 MIXER (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY) EACH 11 16080.00 176880.00
Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE: 630X460X130
Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING
MR 3 32MM- FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP EACH 11 2398.00 26378.00
Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL
MR 4 PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES & EACH 11 3284.00 36124.00
Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL
MR 5 HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES EACH 16 15087.00 241392.00
SET, SIZE: 375X520X400 MM
Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE
Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL
Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH
MR 8 ADJUSTABLE WITH WALL FLANGE 15mm EACH 16 4965.00 79440.00
Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH
MR 9 8mm DIA 1.2 METER LONG FLEXIBLE TUBE EACH 16 2541.00 40656.00
Supply, HOOK ALD-CHR-573
Installation, Testing andor Commisiong
equivalent of PNEUMATIC SINGLE PIECE SLIM
CONCEALED CISTERN BODY WITH INSTALLATION
MR 10 KIT & “S-TYPE” DRAIN PIPE CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH EACH 16 8044.00 128704.00
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings
17.28 11 complete.
17.28.2 Flexible pipe
Providing and fixing mirror of superior glass (of approved quality) complete with 6 mm thick 11 1411.15 15522.65
hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
18.53 13 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved
15 mm conforming to IS : 8931
nominal bore 44 500.35 22015.40
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast
(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse
17.61 14 sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and
pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :
Digitally signed by AMIT
SINGH 20:48:33 IST
DSR NO S NO TOTAL AMOUNT TOTAL AMOUNT
DSR NO S NO TOTAL AMOUNT TOTAL AMOUNT
DESCRIPTION UNIT QUANTITY RATE
2021 DSR (INR) NON-DSR (INR)
18.76 15 Cutting holes upto 30 X 30 cm in walls including making good the same.
18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 16 362.40 5798.40
Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching 10 171.80 1718.00
18.78 16 METRE
surface after housing G.I. pipe etc.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for
hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the
18.7 17 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
18.7.2 20mm nominal outer dia pipes METRE 50 325.10 16255.00
18.7.3 25mm nominal outer dia pipes METRE 20 408.55 8171.00
32mm nominal outer dia pipes 500.95 10019.00
18.7.5 40mm nominal outer dia pipes METRE 20 674.35 13487.00
18.7.6 50mm nominal outer dia pipes METRE 20 927.00 18540.00
18.8 18 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for
hot & cold water
Concealed work supply, including
including all CPVC
cutting chases plain
making goodthreaded fittings,
the walls etc., i/c fixing the pipe
18.8.1 15mm nominal outer dia pipes METRE 80 441.15 35292.00
18.8.2 20mm nominal outer dia pipes METRE 50 513.75 25687.50
18.8.3 25mm nominal outer dia pipes METRE 30 626.05 18781.50
32mm nominal outer dia pipes 712.75 21382.50
18.51 19 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS
standards and weighing
15 mm nominal bore not less than 690 gms. 1 708.40 708.40
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for
soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all
neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or
without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,
clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &
hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.
including chase cutting as required, excavation and back filling in all kind of soils, suspended
from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm.
20 alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) including cost of shuttering for proper completion of the work, breaking and
MR making good the walls and floors etc. after pipes have been duly laid and tested. The rubber
ring shall confirm to IS:5382.
Digitally signed by AMIT
SINGH 20:48:33 IST
DSR NO S NO TOTAL AMOUNT TOTAL AMOUNT
DSR NO S NO TOTAL AMOUNT TOTAL AMOUNT
DESCRIPTION UNIT QUANTITY RATE
2021 DSR (INR) NON-DSR (INR)
The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on
50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes
commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-
charge at site.
a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 200.00 536.00 107200.00
b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 20.00 416.00 8320.00
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6
Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,
enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by
MR 21 clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with
cement concrete 1:2:4 complete as required.
Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating
MR 22 complete in all respects.
Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 31 536.00 16616.00
MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 31 726.00 22506.00
Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round
cover with screws and other required fitting complete as required.
Supply, Installation, testing and commisioning of toilet waste water super quiet portable
pumping station. Pump upto vertical 5 meters and horizontal 100 meter from toilet to vertical
MR 25 shaft with inlet connection in portable pump side inlet of 50, 75, 110 as per requirement to EACH 9 67430.00 606870.00
complete the work as per the directions of engineer in charge
Providing and fixing stainless steel tray below sewage pipe of size 200x200x200 mm of grade
MR 26 SS304 including all accessories METRE 200 3629.00 725800.00
Supply, Installation, Testing and Commisiong of HIGH FLOW SINGLE LEVER CONCEALED
MR 27 DIVERTOR FOR BATH & SHOWER EACH 3 18938.00 56814.00
Supply, Installation, Testing and Commisiong of SPOUT FOR BUILT IN BATH/SHOWER
Supply, Installation, Testing and Commisiong of OVERHEAD SHOWER 350x350MM ROUND
MR 29 EDGE SQUARE HEAD SINGLE FLOW (BODY & FACE PLATE STAINLESS STEEL WITH EACH 3 24100.00 72300.00
CHROME PLATED) WITH RUBIT CLEANING SYSTEM
MR 30 Supply, Installation, Testing and Commissioning of 15 litre geyser EACH 3 12004.00 36012.00
MR 31 Supply, Installation, Testing and Commisiong of SOAP DISH HOLDER EACH 3 4392.00 13176.00
MR 32 Supply, Installation, Testing and Commisiong of TUMBLER HOLDER EACH 3 4309.00 12927.00
Supply, Installation, Testing and Commisiong of TOWEL RACK 600MM LONG WITH
MR 33 LOWER HANGER
MR 34 Supply, Installation, Testing and Commisiong of ROBE HOOK EACH 3 2045.00 6135.00
MR 35 Supply, Installation, Testing and Commisiong of TOILET ROLL HOLDER WITH COVER EACH 16 4978.00 79648.00
Digitally signed by AMIT
SINGH 20:48:33 IST
DSR NO S NO TOTAL AMOUNT TOTAL AMOUNT
DSR NO S NO TOTAL AMOUNT TOTAL AMOUNT
DESCRIPTION UNIT QUANTITY RATE
2021 DSR (INR) NON-DSR (INR)
MR 36 Supply, Installation, Testing and Commisiong of TOWEL HOLDER EACH 3 3336.00 10008.00
Providing and fixing white vitreous china battery based infrared sensor operated urinal of
approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml
17.8 28 consumption), having water inlet from back side, including fixing to wall with suitable brackets Each 14 7004.45 98062.3
all as per manufacturers specification and direction of Engineer-in-charge
Digitally signed by AMIT
SINGH 20:48:33 IST
SCHEDULE OF QUANTITIES - ELECTRICAL WORKS
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
S NO UNIT QUANTITY RATE
2022 DSR (INR) NON-DSR (INR)
A POINT WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
1.10 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
Wiring for group controlled (looped) light point/ fan point/call bell point (without independent
switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in
1.55 surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated
copper conductor single core cable etc as required.
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single
A.3 1.12 core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS Metre 11580 334.00 3867720.00
PVC insulated copper conductor single core cable for loop earthing as required.
Supplying and fixing following modular switch/ socket on the existing modular plate & switch
1.24 box including connections but excluding modular plate etc. as required.
1.24.4 3 pin 5/6 amp socket outlet Each 1004 122.00 122488.00
1.24.5 6 pin 15/16 amp socket outlet Each 138 197.00 27186.00
Supplying and fixing modular blanking plate on the existing modular plate & switch box
A.6 1.26 excluding modular plate as required. Each 200 40.00 8000.00
Supplying and fixing following size/module, GI box along with Modular base & cover plate on
existing modular metal boxes etc. as required.
B SUBMAIN AND CONTROL WIRING
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC
1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit
1.5 sq. mm + 1 X 1.5 sq. mm earth wire
1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 50 334.00 16700.00
1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 50 439.00 21950.00
1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 360 1005.00 361800.00
1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 300 1365.00 409500.00
1 Digitally signed by AMIT
SINGH 20:48:33 IST
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
S NO UNIT QUANTITY RATE
2022 DSR (INR) NON-DSR (INR)
Supplying and making end termination with brass compression gland and aluminium lugs for
9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1
KV grade as required.
Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium
Conductor Cables :
Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor
armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &
(b) 3.5 C x 95 Sqmm XLPE cable RM 50 864.00 43200.00
(c ) 3.5 C x 70 Sqmm XLPE cable RM 50 680.00 34000.00
(d) 3.5 C x 50 Sqmm XLPE cable RM 50 510.00 25500.00
(e) 3.5 C x 35 Sqmm XLPE cable RM 50 378.00 18900.00
Supply of following sizes of copper cables -PVC sheathed PVC/XLPE insulated Copper
C.3 conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1
respectively & ISI marked.
(a) 4 C x 16 Sqmm XLPE copper cable 1446.00 144602.31
(b) 4 C x 25 Sqmm XLPE copper cable 2253.00 225300.00
(c ) 3.5 C x 35 Sqmm XLPE copper cable 2686.00 134300.00
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit
2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with
D.2 connections, testing and commissioning etc. as required.
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB
distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral
2.4 bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as
D.4 required. (But without MCB/RCCB/Isolator 2 Digitally signed by AMIT
SINGH 20:48:33 IST
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
S NO UNIT QUANTITY RATE
2022 DSR (INR) NON-DSR (INR)
MR 12 way (4 + 36), Double door Each 22 9081.00 199782.00
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,
2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as required.
E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS
Supply, installation, testing & Commissioning of 1 module 16A SWITCH SP 1 way for floor
E.2 MR Supply, installation, testing & Commissioning of 2 module 16 A Socket for floor box box. Set 18 577.00 10386.00
Supply, installation, testing & Commissioning of Specific Backbox for Carpet for Floor Box
E.3 MR along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and Set 10 12106.00 121060.00
single cable outlet/ glavanized steel, paint RAL 7031 for floor box .
Supply, installation, testing & Commissioning of Specific Backbox for Wooden Flooring for
E.4 MR Floor Box along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for Set 8 6803.00 54424.00
headband and single cable outlet/ glavanized steel, paint RAL 7031 for floor box.
Supply, installation, testing & Commissioning of flat support plate 8 module for integration of
Mechanism for Floor Box
Supply, installation, testing & Commissioning of waved support plates for 4 module (2x2)
E.6 MR modules for Floor Box Set 18 1533.00 27594.00
Supplying and fixing following modular switch / socket on the existing modular plate & switch
1.24 box including connections but excluding modular plate etc. as required.
1.24.7 TV socket outlet Set 55 148.00 8140.00
Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with
MR required suitable number of GI couplers for joining raceways and fixing GI brackets and all
accessories complete in all respect as per the directions of engineer in charge
(a) 300mmx38mm(GI) - 3 compartment Mtr 200 3602.83 720566.30
E.9 (b) 225mmx38mm(GI) - 3 compartment Mtr 200 2959.62 591923.62
Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables
at the intersection of raceways supplied completely with base and cover plates, height
MR adjustable junction box 65- 90 mm including all accessories complete in all respect as per the
directions of engineer in charge
3 Digitally signed by AMIT
SINGH 20:48:33 IST
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
S NO UNIT QUANTITY RATE
2022 DSR (INR) NON-DSR (INR)
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE
E.11 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Meter 1650 47.00 77550.00
surface/recessed steel/ PVC conduit as required
Supplying and fixing of following sizes medium class PVC conduit aong with accessories in
1.21 surface/ recess including cutting the wall and making good the same incase of recessed
E.12 conduit as required
Supplying and Installation of following size perforated of painting with powder coating M.S.
cable trays of perforation of not more than 17.5% in convinient sections, joined with
4.1 connectors suspended from the cieleing with MS suspenders including bolts and nuts painting
suspenders etc as required
4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 100 1137.00 113700.00
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and
F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe SET 10 13838.00 138380.00
of 2.7 metre long etc. with charcoal/ coke and salt as required.
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc.
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as
F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 200 70.00 14000.00
G PANEL BOARDS
Floor Panels/ HVAC Panel
Designing, fabricating, transporting, unloading, storing, fixing in position, testing and
commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick
CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors
fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply
with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium
bus bar and including supplying and fixing following switchgears, meters and accessories,
inter-connections, bonding to earth, powder coated painting and marking as specified. Switch
boards complete as per schematic diagram:
Type of construction: Form 3
IP classification: 42
The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as
detailed in the Specifications
Colour: Gray Powder Coated, as per approved sample.
1 nos, 200 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking
capacity 25 KA (ICS=ICU up to 433 V) complete in all respect
TPN aluminum bus bars of minimum of 250 Amps capacity with heat shrinkable colored
sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,
size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.
(a) 63 Amps, TPN, MCB -6 Nos. 4 Digitally signed by AMIT
SINGH 20:48:33 IST
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
S NO UNIT QUANTITY RATE
2022 DSR (INR) NON-DSR (INR)
(b) 40 Amps, TPN, MCB - 8 nos
Panel complete as above Each 3 200000.00 600000.00
15 MR UPS Panel
Designing, fabricating, transporting, unloading, storing, fixing in position, testing and
commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick
CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors
fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply
with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium
bus bar and including supplying and fixing following switchgears, meters and accessories,
inter-connections, bonding to earth, powder coated painting and marking as specified. Switch
boards complete as per schematic diagram:
Type of construction: Form 3
IP classification: 42
The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as
detailed in the Specifications
Colour: Gray Powder Coated, as per approved sample.
Three (3) nos, 63 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault
breaking capacity 25 KA (ICS=ICU up to 433 V) complete in all respect
TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored
sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,
size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.
2 Nos. 100A, 4P, MCCB (25kA) with phase indicating lamp protected with 2A, SP, MCB's
along with E/M interlocking
(a) 63 Amps, TPN, MCB - 2 nos
(b ) 40 Amps, TPN MCB - 10 nos
Panel complete as above Each 1 314296.65 314296.65
Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2
17 2.21 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 6 269.00 1614.00
front side as required
Providing and fixing HT danger notice plate of 250mm x 200mm made of mild steel, atleast 2
18 2.22 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 2 292.00 584.00
front side as required
5 Digitally signed by AMIT
SINGH 20:48:33 IST
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
S NO UNIT QUANTITY RATE
2022 DSR (INR) NON-DSR (INR)
Supply, Installation, Testing and Commissiong of 20 KVA True Online Double Conversion
UPS 3Phase Input - 3Phase Output in Parallel Redundant N+1 Configuration IGBT Based
Rectifier and IGBT Based Inverter Batteries:12 V, SMF Amararaja/Exide with minimum VAH
capacity of 15600 suitable for 30 minutes backup with each ups Along with Accessories Rack,
MR Interlinks, SFU, Parallel Kit, DC Cable Upto 5 Meters complete in all respect as per the SET 3 764186.00 2292558.00
directions of the engineer in charge. UPS should have availability of Input /Output isolator,
Inbuilt manual bypass along with phase sequence corrector. UPS Efficiency shall not be less
than 94% from 25% to 100% Load
Total of Electrical items 8478031.00 8802124.77
6 Digitally signed by AMIT
SINGH 20:48:33 IST
SCHEDULE OF QUANTITIES - HVAC WORKS
S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
UNIT QUANTITY RATE
DSR (INR) NON-DSR (INR)
VAV BOX (WITH INTEGRAL SOUND ATTENUATOR)
Supply and Installation of pressure independent rectangular VAV unit with integral sound attenuator
made of 22G GI sheet casing length 900mm consisting of 25mm thick 48kg/m3 density fiber glass
3.0 wool covered with tissue paper ,elliptical volume control damper , calibrated differential pressure
sensor (DPT sensors) at inlet complete with digital Thermostat.(All VAV shall be factory calibrated).
Supply, installation, testing and commissioning of Variable Frequency Drive (VFD)
M.R. 380-400 VAC, IP-54 Chassis, RFI class A1 (C2), No brake chopper.
a VFD upto 5 HP or as directed by the engineer in charge Nos. 4.0 40000.00 160000.00
DUCT PRESSURE SENSORS
Supply, Installation and Testing of pressure sensors to be installed in supply air ducts. Quoted
5.0 MR price shall be inclusive of necessary conduting, copper control cabling from the sensors to the Nos. 8.0 17500.00 140000.00
respective VFDs as per "Approved Shop Drawings".
6.0 Tube Axial Fan
Supply Installation, testing and commissioning of supply air Tube Axial flow fan of following capacity
with GSS casing and aluminium alloy impellers with high efficiency aero-foil sections, blades, the
M.R. impeller directly driven by TEFC induction motor suitable for 3 Phase 50 Hz 415 V ± 10 %, complete
a as required. This cost shall include the cost for suitable panel, DOL starter, breakers etc compete in all
respect as per the directions of engineer in charge.
9000 cfm at 15 mm static presuure for fresh air/exhaust air With Class "H" insulation. NOS 8.0 143910.00 1151280.00
Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and return
air path as and where required of required sizes i/c control wiring,the damper shall be motorized and
spring return so as to close the damper in the event of power failure automatically and open the same
7.0 16.20 in case of power being restored. The spring return action shall be inbuilt mechanism and not externally
mounted. The damper shall also be closed in the event of fire signal complete as required and as per
specifications.
(Fire damper shall ve suitable for 120 minutes fore rating as per NBC norms)
GI Gravity Louver
1 Digitally signed by AMIT
SINGH 20:48:33 IST
S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
UNIT QUANTITY RATE
8.0 M.R. Supply, installation, testing and commissioning of GI Gravity Louver complete with neoperene rubber
gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.
9.0 VOLUME CONTROL DAMPER
Supply, Installation and Testing of GI box type volume control dampers as per the specifications and
a shop drawings. SQM 20.0 5900.00 118000.00
- For Rectangular Ducts
Insulated Flexible Duct
Supply, Installation, Testing and Balancing of flexible ducting comprising of inner as well as outer skin
constructed out of aluminium & fibre glass insulation 25mm thick of minimum 24 kg/cu.m density
insulation sandwitched in between. Duct should confirm to fire rating standards BS-476 part 5, 6 & 7.
10.0 Flexible Ducts of following sizes as per approved shop drawings, specifications :
Universal (Jubilee) clamp should be provided to fix the flexible duct in the spigots/Butterfly Dampers
MR and covered with aluminium tape. Circular clip with chain/GI threaded rod to be provided to support
the flexible duct.
Supply, Installation and Testing of single piece GI round spigot made out of spinning process with
11.0 50mm height and having grooves on both sides and circular flanges. Spigots shall be installed on
main ducts to facilitate connection of flexible ducts.
Supply, Installation and Testing of Butterfly damper of GI sheet construction with two flap with round
flange on one side and 10mm grove on other side for fixing of flexible duct with the help of band, 20
12.0 Gauge Frame 250mm dia & above, 22 Gauge Frame upto 200mm dia & 22 Gauge Blade in all sizes
as per the specifications and shop drawings.
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/
13.0 round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers,
16.12.1 supports etc. as per approved drawings and specifications of following sheet thickness complete as
2 Digitally signed by AMIT
SINGH 20:48:33 IST
S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
UNIT QUANTITY RATE
Diffusers & Grills
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume
control dampers as per specifications.
Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without
volume control dampers complete as required
Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with
aluminium volume control dampers with anti smudge ring & removable core.
Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without
volume control dampers with anti smudge ring & removable core.
Supply, Installation, Testing of 125mm deep antivibration flexible joints at the outlet of air handling
18.0 MR units/ductable split units//inline fans. Flexible connections shall be constructed using imported fire RM 100.0 1440.00 144000.00
retardant fabric with extruded aluminium frame/flange on both sides of approved make.
Supply, Installation, Testing and Balancing of linear slot diffusers as per the approved shop drawings
and specifications. Each slot shall be 25mm wide. The diffuser face shall be a one piece extrusion so
there are no visible joints. Slot diffusers shall be complete with end caps either as end plates or end
angles or integral part, air control blades etc. Slot diffuser have a variable neck length and the diffuser
20.0 MR face could be optionally be fitted to the plenum box on site. Diffuser shall have provision to access
collar dampers for air balancing.
All Return air diffusers in false ceiling to be properly supported from real slab using chains or gripple
3 slot/2slot, powder coated extruded aluminium diffusers of approved colour & shade. SQM 10.0 12500.00 125000.00
Supply, Installation and Testing of Bird Screens with GI wire mesh to be installed at the suction of SQM 10.0 5500.00 55000.00
21.0 MR fresh air/discharge of Exhaust air as per the specifications and shop drawings. Sample of bird screen
to be got approved from consultants and Clients prior to procurement.
Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile
rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The
22.0 16.23 joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation
complete as per specifications and as required.
Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass
wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre
16.21 to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet SQM 100.0 708.00 70800.00
fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc.
complete as required and as per specifications
3 Digitally signed by AMIT
SINGH 20:48:33 IST
S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT
UNIT QUANTITY RATE
Supply, Installation, Testing and Commissioning of Air Purification systems in the specified areas
where AHU/VRF/FCU/Cassette/Hi-Wall/Ductable units etc are installed, so as to improve indoor air
quality by using, Self-cleaning Needlepoint Ionizer made of Carbon brush emitters. The Needlepoint
brushes shall be designed to properly release equal amount of positive and negative ions in the supply
air,>400Million ions/cc without any obstruction. The units to be suitable for capacities up to 6000 CFM,
with universal voltage input 24V to 240V AC/DC, ionizer indicator LED, set of dry contacts which will
indicate ionizer functionality. The unit shall have capability to be switched on 24/7 and shall have
MR weathertight conduit of minimum 6ft length.System should kill microorganisms and pathogens and
backed with Independent lab test reports on the real virus and not surrogate. The system also should
reduce odors, TVOC’s and reduce particle/particulate matter/PM2.5/PM10. The products should be UL
2998 listed with zero Ozone Emission.
AHU (upto 6000Cfm )
Smart Indoor Air quality monitor to measure Air quality parameters including AQI, PM1, PM2.5, PM10,
CO2, Humidity and Temperature. In addition to the mentioned sensors of the base device, you can
customize it to measure more parameters by adding extra sensors. This monitor should be a 3-tier
architecture including sensor Hardware, secure cloud infrastructure, monitoring apps including
dashboard, android/IOS apps, where ever requires. Dashboard should be customisable and IOT
29.0 MR (Internet of things) enabled with view and management for all of your locations on one dashboard so
that you can easily identify and address any air quality issues. Sensors should be soft calibratable. The
System should be capable of providing periodic Preventive maintenance for automated after sales
support service in form of notification/ alerts and user interaction through dashboard application.
Air Quality Monitor Nos 1.0 7580.13 7580.13
TOTAL HVAC WORKS 5524506.0 5409780.1
4 Digitally signed by AMIT
SINGH 20:48:33 IST
SCHEDULE OF QUANTITIES - HVAC WORKS
DSR HVAC TOTAL
S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE AMOUNT
EM 2018 DSR (INR) NON-DSR (INR)
Supply Installation, Testing & Commissioning of modular type Variable Refrigerant
Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,
having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors
for above 14 HP modules, microprocessor based Controller, top discharge type condensing
unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as
1 1 required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C per HP 60 16415.00 984900.00
ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3
Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and
ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER
not less than 6.5 .
Supply, installation, testing and commissioning of following minimum capacity 4-way flow
VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media
pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil
section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,
2 2 necessary supports, vibration isolation, cord less remote control etc., suitable for operation on
single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have
automatic force shut down provision in case of fire on receiving signal from BMS System. The
cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree
C WB temperature.
Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High
wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low
noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil,
electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary
3 3.00 accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply,
complete as required. The unit shall have automatic force shut down provision in case of fire
on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet
conditions of 27 Degree C DB and 19 Degree C WB temperature.
Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T"
3 4 Joints i.e. Refnet Joints/ Header with Insulation for refrigearnt piping
Refrigerant Piping
1 Digitally signed by AMIT
SINGH 20:48:33 IST
Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing
of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,
4 5 complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing
including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell
elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for
Suction and Liquid lines, all accessories as per specifications etc. as required :
4.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 200 245.00 49000.00
4.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 280 331.00 92680.00
4.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 200 466.00 93200.00
4.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 280 588.00 164640.00
4.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 100 707.00 70700.00
4.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 100 865.00 86500.00
4.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 1022.00 51100.00
4.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 1108.00 55400.00
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC
insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit
6 Cable Trays with Covers
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray
(Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in
convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders
including G.I. bolts & nuts, etc. as required.
6.1 4.6.8 300 mm width X 62.5 mm depth X 2.0 mm thickness meter 100 1190.00 119000.00
6.2 4.6.10 450 mm width X 62.5 mm depth X 2.0 mm thickness meter 100 1474.00 147400.00
7 MR Drain Piping
Supply,installation,testing and commissioning of PVC drain water with necessary clamps,
fittings such as bends tees etc. and duly insulated.
8 MR Supply, Installation, Testing and Commissioning of Central Advance Intelligent Control
Manager with touch color LCD Display, Suitable for automatic control of all indoor units by
schedule function, troubleshooting, auto heat/cool changeover, temperature limitation, history Each 1 115345.00 115345.00
function, etc., complete as per technical specifications, capable of connecting upto 64 nos.
indoor units as required.
Total HVAC WORKS 3007780.00 591887.16
2 Digitally signed by AMIT
SINGH 20:48:33 IST
SCHEDULE OF QUANTITIES - DATA and VOICE WORKS
S NO Description UOM Qty Rate DSR Amount Non-DSR Amount
A. UTP Components for Data
Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for
(DSR Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250
1.53.1) MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination
at Work Station end. Keystone Unshielded Outlet, 180DG C6, Blue
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination
at Work Station end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination
at Rack Side. Keystone Unshielded Outlet, 180DG C6, Blue
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination
at Rack Side end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow
Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for
6 MR information outlet (I/O) to end user device connectivity.High Speed Gigabit 24AWG Nos. 283 400.00 113200.00
U/UTP Patch Cord Blue, LSZH, C6, 2M
Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for
7 MR information outlet (I/O) to end user device connectivity. (Rack end), High Speed Nos. 283 950.00 268850.00
Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M
Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for
8 MR information outlet (I/O) to end user Redantant device connectivity.High Speed Nos. 283 400.00 113200.00
Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, 2M (Yellow)
Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for
9 MR information outlet (I/O) to Rack End Redantant device connectivity.High Speed Nos. 283 400.00 113200.00
Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, 2M (Yellow)
Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred
Jack Panel for CAT6 cable termination at rack end. Data Active
Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred
Jack Panel for CAT6 cable termination at rack end. Data Active Redandant
SITC of 04 core OM3 Multimode fiber orange color 50/125, minimum bending
SITC of OS2 G.652.D 1-fibre, buffered, LC Duplex, LC to pigtail, 1m.
B. UTP Components for VOICE
Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for
(DSR Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250
1.53.1) MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination
at Work Station end. Keystone Unshielded Outlet, 180DG C6, (Ivory)
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination
at Rack end. Keystone Unshielded Outlet, 180DG C6, (Ivory)
Digitally signed by AMIT
SINGH 20:48:33 IST
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination
4 MR at Rack End. Keystone Unshielded Outlet, 180DG C6, For Voice Active Riser Cable Nos. 189 450.00 85050.00
Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred
Jack Panel for CAT6 cable termination at rack end. Voice Active
Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred
Jack Panel for CAT6 cable termination at rack end. Voice Active --- Riser Side
Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for
7 MR information outlet (I/O) to end user device connectivity. (Rack end), High Speed Nos. 8.00 950.00 7600.00
Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M
Supply , Installtion , Testing and Comissioning of 4 Port British Style Shuttered Face
8 MR Plate white for I/O fixing at user side Nos. 189 275.00 51975.00
C. 200 Pair MDF Box
1 MR 200 Pair MDF Box with mounting Frame Nos. 2 11666.00 23332.00
2 MR 10 Pair Krone Module Nos. 20 900.00 18000.00
3 MR 25 Pair Riser Cable Mtr. 200 1253.00 250600.00
D UTP Components for Wifi
Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for
(DSR Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250
1.53.1) MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination
at Work Station end. Keystone Unshielded Outlet, 180DG C6, White
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination
at Rack end. Keystone Unshielded Outlet, 180DG C6, White
Supply , Installtion , Testing and Comissioning of 24 port Unloaded Angled Staggred
Jack Panel for CAT6 cable termination at rack end. Voice Active
Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for
5 MR information outlet (I/O) to end user device connectivity. (Field End), High Speed Nos. 40.00 400.00 16000.00
Gigabit 26AWG Patch Cord Grey, LSZH, C6, 2M
Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for
6 MR information outlet (I/O) to end user device connectivity. (Rack end), High Speed Nos. 40.00 400.00 16000.00
Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M
Supply , Installtion , Testing and Comissioning of Single Port British Style Shuttered
7 MR Face Plate white for I/O fixing at user side Nos. 40 275.00 11000.00
E UTP Components for CCTV & Access Control
Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for
(DSR Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250
1.53.1) MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6
Digitally signed by AMIT
SINGH 20:48:33 IST
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination
at Work Station end. Keystone Unshielded Outlet, 180DG C6, White
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination
at Rack end. Keystone Unshielded Outlet, 180DG C6, White
Supply , Installtion , Testing and Comissioning of 24 port Unloaded Angled Staggred
Jack Panel for CAT6 cable termination at rack end. Voice Active
Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for
5 MR information outlet (I/O) to end user device connectivity. (Field End), High Speed Nos. 24.00 400.00 9600.00
Gigabit 26AWG Patch Cord Grey, LSZH, C6, 2M
Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for
6 MR information outlet (I/O) to end user device connectivity. (Rack end), High Speed Nos. 24.00 950.00 22800.00
Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M
Supply , Installtion , Testing and Comissioning of Single Port British Style Shuttered
7 MR Face Plate white for I/O fixing at user side Nos. 24 275.00 6600.00
GRAND TOTAL (A+B+C+D+E) 1833120.00 2233131.33
GRAND TOTAL (A+B+C+D+E) 1833120.00 2233131.33
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Description UOM Qty Rate Amount
A. Active Component for Data, Wifi
24-Port Layer 3 Stackable Managed Gigabit Switch, 20 x 10/100/1000BASE-T ports
With 4 x Combo 10/100/1000BASE-T/SFP ports, 4 x 10G SFP+ ports, Switch
Resource Management (SRM) for flexible management of system resources,
1 Redundant Power Supply (RPS) support, MPLS L2VPM/L3 VPN support, Full L3 Nos. 1 538650.00 538650.00
routing protocol support including OSPF, BGP, and ISIS for IPv4/IPv6. As Approved by
Supply instllation testing and commissioning of Access Switch of 48 x 1G POE+, 4 x
SFP+ , 370W PoE, Switching Capacity of switch is of 176 Gbps having Forwarding
performance (64-byte packet size): 130 Mpps, Secure Shell (SSH), RADIUS, TACACS
2 + DRAM 2GB , Flash 2GB , 10K IPv4 Routes ,1K multicast Routes ,16K MAC address Nos. 4 246954.00 987816.00
, 16K flow entries L3 Protcols like OSPF , PBR, MACsec, PIM , QOS from day-1 , As
Approved by NSL Incharge.
SITC of 48 port 10/100/1000 Base T Switch with 4 x 10G SFP+ ports,The Switch
should have 16K MAC address, Should have RJ-45 console port should support
MSTP and DUAL configuration, Should support Static Route Entry: IPv4 124; IPv6 50
, Should support IP-MAC- Port Binding strictly management network devices
3 preventing illegal access and the Man-in- the-middle attack, Should support Nos. 8 187641.00 1501128.00
Asymmetric VLAN, Auto Voice VLAN, Should support Cable diagnostics, Time-based
PoE: PoE ports can be turned on/off by port or system through schedule,
Operating Temperature -5 to 50°C (23 to 122°F). As Approved by NSL Incharge.
4 Supply, Installation, Testing & Commissioning of Modules 10G. Nos. 13 49920.00 648960.00
Wi-Fi standard, IEEE’s new 802.11ac Wave 2 specification, and meets the growing
requirements of wireless networks by delivering a better user experience. The 1830
5 Series extends support to a new generation of Wi-Fi clients, such as smartphones, Nos. 40 68820.00 2752800.00
tablets, and high-performance laptops that have integrated 802.11ac Wave 1 or Wave
Digitally signed by AMIT
SINGH 20:48:33 IST
Supplying, installation, testing and commissioning of WLC should support 50 access
points from Day 1 and scalable for upto 4000 AP's without Software/hardware change.
Proposed WLC should be On-Prem/cloud based, and should be hosted in
India.Controller shall support minimum 20000 concurrent sessions from a single
account.WLC should provide Guest management system with Voucher based
authentication, local SMS server integration for OTP, Google and Facebook
authentication. Should support major SMS gateway provider. Same controller should
manage & configure Wireless AP & Network Switch through single dashboard.
6 Providing and laying of LC- LC multimode OFC type patch cord for data and voice. Nos. 13 3850.00 50050.00
Supply, Installation, Testing and comissioning of Router. Router should be a modular
aggregation platform. It should support broad band aggregation for voice, video,
data, and mobility services with QoS scaling to a large number of queues
per device. Router should have 4 nos. of 10/100/1000 Base-T ports and 4 nos. SFP
based ports. Router should have at least 1 open slots for additional LAN/
WAN modules other then asked ports. Router should have 4x10 Gigabit SFP+ ports
from day 1. Router should have minimum 4 GB RAM from day 1. Router should have
DES, 3DES and AES Standards through dedicated encryption module/processor.
Should support IPSec with IKEv2 and Suite-B Encryption. Router shall have hot
swappable 1 internal power supply. Router should have a minimum performance Each 1 2,50,000.00 2,50,000.00
of 10 Mpps and 10 Gbps of bandwidth, Scalable to 10 Gbs in future. Router
should support static Routes, OSPFv2, OSPFv3, BGP4, MBGP, BFD, Policy
based routing, IPv4 and IPv6 tunneling, MPLS LDP, MPLS L3VPN, MPLS L2VPN ,
MPLS TE, FRR Link & Node Protection, LDP, MPLS Static label, MPLS VRF-
aware static labels, LDP - / Router‘s Operating System should be tested
and certified for EAL 4 or above under Common Criteria Certification
Digitally signed by AMIT
SINGH 20:48:33 IST
Supply, Installation, Testing and comissioning of Firewall solution should be Hardware
based, Reliable, purpose-built security appliance with hardened operating system that
eliminates the security risks associated with general-purpose operating systems. It
Should support 1:1 high availability. It Should have minimum 4 x 10G supporting SFP+
interfaces & 4 x 100/1000/10 BaseT RJ45 ports to cater to connectivity from multiple
service providers and load balance them. The Firewall should have ultra-low latency .
The IPSEC VPN should deliver at least 10 Gbps throughput to ensure connectivity with
Multiple colleges / University catering to Data / Voice traffic over IPSEC tunnel. The
Firewall should be able to handle very high concurrent sessions like 20 Million or above
and at least 200,000 of new sessions per second. The solution should support
Virtualization with 10 Virtual contexts scalable to 150 to help use the logical Firewalls
for internal / student projects run isolated with each other. The proposed solution
should have integrated IPS module with at least 10Gbps of throughput for deep pack
8 inspection of traffic and also should be able to inspect encrypted SSL traffic. The Each 1 7,50,000.00 7,50,000.00
solution should have at least 5 Gbps of Threat Protection throughput and the so that
the entire traffic is scanned before reaching the end user. The antivirus engine should
be able to inspect the encrypted traffic like HTTPS, SMTPS, POP3s , IMAPs, FTPs etc.
The proposed system should have integrated Web Content Filtering solution which can
be used to block any unwanted sites / category of sites to adhere to University IT
guidelines. The Firewall & IPSEC VPN module shall belong to product family which
minimally attain Internet Computer Security Association (ICSA) Certification or
equivalent. The proposed system should have modules/Licenses for integrated Web
Content Filtering along with IPS, Application Control, Antivirus / Malware Protection &
Anti spam. Proposed solution should be an Appliance/Virtual Machine based solution.
In case of Virtual Machine based.
Supply, Installation, Testing & Commissioning of Load Balancer : Appliance based
customised Network Analyser for Network Traffic Analysis Appliance shall be Intel x86
9 based device with secure intranet server with Linux Based operating system and Each 1 4,50,000.00 4,50,000.00
relational databases for long term storage. Appliance includes license for 100 units
Total : A - Active Component for Data, Wifi 8224077.00
Digitally signed by AMIT
SINGH 20:48:33 IST
SCHEDULE OF QUANTITIES - CCTV
S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT
S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT
DSR (INR) NON-DSR (INR)
Supply, Installation, Testing & Commissioning of 5MP IR IP H.265
Vandal Proof Dome camera with 2.8 to 12mm Motorized
Lens,Smart IR, up to 30M IR distance,Up to 120 dB WDR (Wide
Dynamic Range),3D DNR (Digital Noise Reduction),H.265+,
H.265, H.264, MJPEG,Corridor mode, Triple streams,3-Axis,
IP67, IK10 Vandal Resistant,Colour: 0.005Lux (F1.4, AGC ON), 0
Lux with IR,Video Compression H.265+, H.265, H.264,
1 MR MJPEG,Behavior Detection Intrusion, Crossing line, Motion Nos 16 32000.00 512000.00
detection, Object left, Missing object,Intelligent Identification Face
detection, Defocus, Scene Change,PoE (IEEE802.3 af) Power
consumption: Max 7.2W,Edge Storage Micro SD Card, Up to
256GB, ANR Support,Working Environment -40°C ~ +60°C,
Humidity ≤ 90% RH(Non-condensing),Compatible Integration
ONVIF (Profile S/G), API.
Supply, Installation, Testing and Commissioning of 16Ch
2 MR Embedded Network Video Recorder with 4 Sata Supports 1 × Nos 1 52000.00 52000.00
RJ45 1000M ,4K Cameras, HDMI, VGA, RAID, Redundant power
SITC SSD Analytics
Hard Diskand ONVIF
Drive 8TB, 24/7 surveillance category
3 MR Only complete etc as required.etc.all complete. Nos 4 27000.00 108000.00
Supply, Installation, Testing & Commissioning of 55" Flat Screen
HD led (24X7) with Interfaces include HDMI, DVI, D-sub,
Component and Composite input as well as RS-232C and RJ45
4 MR for extensive connectivity, remote control and wall mount unit / Nos 1 68000.00 68000.00
floor stand complete with making connections etc complete as
5 MR SITC of HDMI cables 10 meters M2M etc all compelte. Nos 2 6200.00 12400.00
Total : A - CCTV 752400.00
Digitally signed by AMIT
SINGH 20:48:33 IST
SCHEDULE OF QUANTITIES - LIGHTING WORKS
S NO DSR/MR Description Image Unit QTY Rate DSR AMOUNT NON DSR AMOUNT
Supply, Installation, Testing and Commissioing of LED Pendant luminaire with
LED(Light Emitting Diode) system power: 28W, 120 LM/W system efficacy,
colour temperature of 4000K, neutral white, 230V constant current driver, 70%
of luminous flux after 50,000 operating hours, energy efficient LEDs, CRI>80,
luminous flux of 3360 lm, MacAdam 3, T.H.D≤10%, driver efficiency ≥ 88%,
1 MR surge protection of 2.5kV, direct light emission, Aluminium body, polyester no 124 5195.00 644180.00
white powder coat applied over a 5-stage pre-treatment, Prismatic diffuser for
glare-free uniform light, UGR<19, Electronic control gear
Protection class I, IP40, L =1195mm, B = 295mm, H = 67mm, PH = 1500mm
Supply, Installation, Testing and Commissioing of Recessed downlightwith
HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system
power: 12 W, Luminous flux of luminaire 1320 lm, 110 LM/W system efficacy,
Colour temperature of 4000 K, Neutral white, CRI > 80, 230V constant current
driver, 70% of luminous flux after 50,000 operating hours; energy-efficient
2 MR LEDs, direct light emission, housing in die-cast aluminium, Polyester powder no 293 1395.00 408735.00
white coloured coat applied over a 5-stage pre-treatment trim, prismatic
diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW
SMOKE) wiring, Electronic control gear,
Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm
Supply, Installation, Testing and Commissioing of Pendant/Recessed luminaire
with LED (Light Emitting Diode), system power 28 W, luminous flux of
luminaire 3080 lm, 110 LM/W system efficacy, direct light emission CRI>80,
colour temperature of 4000K, Neutral white, 230V constant current driver, 70%
of luminous flux after 50,000 operating hours, energy efficient LEDs, luminaire
profile in aluminium, Plastic moulded end caps, Polyester powder Aluminium
3 MR white coloured coat applied over a 5- stage pre-treatment, high efficiency glare- no 219 4000.00 876000.00
free snap fit micro-prismatic diffuser for homogeneous light distribution, ZHLS
(Zero Halogen Low Smoke) internal wiring, integral Electronic control gear,
adjustable suspender,
Protection class I, IP 20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max =
Supply, Installation, Testing and Commisioning of Recessed luminaire with
LED (Light Emitting Diode), system power: 28 W, luminous flux of 2800 lm,
colour temperature of 4000 K, Neutral white, 230 V constant current driver,
70% of luminous flux after 50,000 operating hours, energy-efficient LEDs, CRI
4 MR > 80, CRI > 80, THD<5%, P.F>0.95, SDCM 3, direct light emission, Luminaire no 189 2800.00 529200.00
housing in Aluminium Extrution, polyester white powder coat applied over a 5-
stage pre-treatment, Opal diffuser for glare-free uniform light, integral
electronic control gear,
Digitally signed by AMIT
SINGH 20:48:33 IST
Supply, Installation, Testing and Commisioning of Recessed downlight with
LED (Light Emitting Diode) system power: 5W, Luminous flux of luminaire 400
lm, Colour temperature of 4000 K, Warm white, CRI > 80, 230V constant
current driver, 70% of luminous flux after 50,000 operating hours; energy-
efficient LED, direct light emission, housing in die-cast aluminium, Polyester
powder white coloured coat applied over a 5-stage pre-treatment ceiling trim,
with reflector, beam angle of 24°, Electronic control gear,
Protection class II, IP 20,
Digitally signed by AMIT
SINGH 20:48:33 IST
SCHEDULE OF QUANTITIES - FIRE ALARM
DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT
DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT
2022 DSR (INR) NON-DSR (INR)
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal
1 17.2.4 detector complete with mounting base complete as required. No 179 2858.00 511582.00
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS
Box having two LED, metallic cover complete with all connections etc as required.
Supplying, installation, testing & commissioning of intelligent addressable thermal detector
with rate of rise cum fixed tempreature thermistor complete with base as required.
Supplying, installation, testing & commissioning of fault isolator complete with base as
Supplying, installation, testing & commisssioning of intelligent addressable programmable
5 17.2.6 sounder complete as required. No 8 2651.00 21208.00
Supplying, installation, testing & commissioning of addressable fire control module complete
Supplying, installation, testing & commissioning of addressable phone control module
7 17.2.11 complete as required. No 2 3267.00 6534.00
Supplying, installation, testing & commissioning of addressable manual call point complete as
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB,
11 17.3.1 MP3 player (including 6 zone button paging station) with seamless integration facility with No 1 126411.00 126411.00
main fire alarm panel for voice evacuation complete as required
Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as
Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms
13 17.3.7 operating at 240 Volt AC Supply complete as required. NOS 3 145793.00 437379.00
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed
14 17.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath Mtr. 1074 173.00 185802.00
complete as required
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the
17.5.3 existing surface / recessed steel conduit of following pairs, cores and size including
15 connections and interconnections etc. as required.
17.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm Mtr 744 89.00 66216.00
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries
16 17.5.4 and accessories like coupler etc. as required. Metre 744 53.00 39432.00
Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery
backup complete as required.
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with
19 17.3.9 microphone assembly complete as required. NOS 1 81756.00 81756.00
Supply, Installation, Testing and Commisioning of Loop Card capacity of 159 detectors For
BMS Fire integration compatible with existing system
Supply, Installation, Testing and Commisioning of Interface Card for BMS fire integration
compatible with exisiting system
Supply, Installation, Testing and Commisioning of repeater panel having 640 character liquid
crystal with backlit control compatible with existing system
Supply, installation, Testing and Commisioing of 12 U Rack
Supply Installation Testing and Commissioinng of Ceiling Mount Loudspeaker 2 ways.
Passive Impedance Power 20W @ 8 Ohm & 70/100V. LF transducer 5" woofer HF transducer
24 MR 0.5" tweeter Frequencies Range 100Hz-20KHz Coverage 150° x 150° @ 1 KHz; 80° x 80° @ Nos 20 8,443.01 1,68,860.18
4KHz Sensitivit v 88dB, Max SPL 101dB
Supply Installation Testing and Commissioinng of Amplifier Class D Switching Source Guy
Line 70/100V Power 2x120W,Sensitivity Input 1V (10.1V) Input Impedance 20kOhm
TOTAL FIRE 10kOhm
ALARM (unbalanced)
WORKS Frequency Range 100Hz - 15kHz 1892374.00 863536.17
1 Digitally signed by AMIT
SINGH 20:48:33 IST
SCHEDULE OF QUANTITIES - EPABX
S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT
S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT
Supply, Installation, Testing & Commissioning of Server based Communication
System with all the required Software licenses and Hardware - IP-PBX/IP
Telephony Communications Server: The IP Telephony Solution shall support the
following Services - Voice, Video, IM, Presence and Audio Conference The
Solution should be built on Active-Redundant Servers The IP Telephony Solution
should support H.323 and SIP The Solution should support the following Trunks -
1 FXO, E1 PRI and SIP The IP Telephony solution should incorporate all licenses for Nos 1 1438500.00 14,38,500
the Phones and Trunks Solution should support 190 Extensions from Day 1 with
future scalabilityupto 1000 users. Licenses for all Phones supplied should be
provisioned on Day1 Solution should support Hard IP Phones, Softphones, Video
Phones, 50 Analog Extensions with necessary Licenses, Rack mount architecture,
complete as required and as per technical specifications.
Supply, Installation,Testing and commisioning of Executive Level IP Phone with
Color display – 3.7 inches x 2.1 inches (9.5 cm x 5.4 cm)- Diagonal width: 4.3
inches (11 cm), Touch Screen display, 4-position adjustable tilt display,
Permanently-labeled feature buttons:, speaker, mute, headset, contacts, home,
history, message, phone, forwarding, volume (separate volume levels in handset,
speaker, ringer, and headset), Red LEDs on speaker, mute, headset, message
and history, 24 administrative buttons, Wideband speakerphone 0-5 Softkeys,
Ergonomic hearing aid compatible, handset supporting TTD acoustic coupler,
2 Bluetooth and DECT headset support with adapter, Message waiting indicator, Nos 11 22500.00 2,47,500
Ethernet (10/100/1000) line interface, Secondary Ethernet (10/100/1000)line
interface, Optional IEEE PoE 802.3af adapter registers as class 2 device, SIP
protocol, H.323 protocol support, Standards-based codec support: G.711, G.726,
G.729A/B, G722 , Supports the following languages: Arabic, Brazilian Portuguese,
Simplified, Chinese, Dutch, English, Canadian,French, Parisian French,
German,Hebrew, Italian, Japanese (Kanji,Hiragana and Katakana), Korean, Latin
American Spanish, Castilian Spanish, and Russian. Includ Licence.
Digitally signed by AMIT
SINGH 20:48:33 IST
2.8” (diagonal) color display—320 x 240 pixels, Multiple line phone with four red /
green line / feature indicators around display, 4 Context sensitive soft keys, Hard
buttons for phone, messages, contacts, history, home, navigation cluster, headset,
speaker, volume, mute, LEDs for speaker, mute, headset, essage, history,
Wideband audio in handset and wired headset, Full duplex speakerphone &
handset, Ergonomic hearing aid compatible handset supports TTD acoustic
coupler, Message waiting indicator, Mute key with optional mute alerting, IC call
alerting with 360-degree visibility, Dual-position stand, optional wall-mount stand,
Gigabit Ethernet (10 / 100 / 1000) line interface, Second Ethernet interface 10 /
100 / 1000 Mbps, PoE Class (IEEE 802.3af) registers as class 1 device and
supports 802.3az, Optional AC to 5 volt power supply • SIP protocol support,
Standards-based codec support: G.722, Opus, Configurable via Web interface,
Support for HTTPS, TLS and SRTP for encryption, Recent Call Log (100 entries),
Zero touch deployment via Device Enrollment Services Support, Supports the
following languages: Dutch, English (UK & US), French, (Canada), French
(France), German, Italian, Japanese, Portuguese (Brazil), Simplified Chinese,
Spanish (Latin America), Spanish (Spain),Traditional Chinese, Includ Licence.
Supply Installation, Testing and Commissioning of Analog Speaker Phone with
Total 25,54,260
Digitally signed by AMIT
SINGH 20:48:33 IST
SCHEDULE OF QUANTITIES: ACCESS CONTROL
S NO DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT
S NO DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT
DSR (INR) NON-DSR (INR)
Supply, Installation,Testing and commisioning of Biometric
and RFID based Access terminal, RFID Supported (125kHz
EM & 13.56MHz MIFARE, MIFARE Plus, DESFire/EV1,
FeliCa), Mobile Card (NFC/BLE), 30,000 (1:1 User based),
5 Faces/ User Capacity, 5,000,000 Text Logs, 2" TFT
Screen, 24 bit Voice DSP with ECO Cancillation,
Eternet, RS 485, Weigand Supported, Complete as
Supply Installation Testing & Commissioning of Access Control
Software including Time Attendance Multi Reader and controller
confuguration and upgradable to Enterprise level with unliimited
users. Databse Supports: MS SQL, Oracle, and MS Access
database types. Type of technology supports: IRIS Sacnner,
2 MR Biometric, Face, RFID , etc supports template management , Nos 1 76,125.00 76,125.00
Highly secured communication with server,Allows for real- time
monitoring of system status and user activities with optional audio
alerts. tamper detection, network communication loss, and many
other system attributes.
SITC of Access IP Master Controller with Enclosure & Power
Supply- 1 door Universal 2 Reader TCP/IP Controller Expandable
upto 4 Reader with exit reader module,4 Programmable inputs & 4
3 MR outputs 100 mA MAX ),Temperature: 0 to 70°C (35 -150°F); Nos 4 45,019.00 1,80,076.00
Humidity: 20 to 80% RH (non-condensing) , 3000 USERS & 3000
transactions,2 Reader.
Supply, Installation, Testing & Commissioning of 12V, 5 Amp.
SMPS with MS Box Certified.
Supply, Installation, Testing & Commissioning of Smart card
Frequency Excitation (13.56 MHz) Mifare/I- class technology smart
5 MR Card. Memory Type EEPROM,Complies with ISO/IEC standards Nos 250 153.00 38,250.00
for thickness. Lifetime Warranty.
Supply Installation Testing and Commissioning of double leaf 600
6 MR LBS Door Electro Magnetic Lock with complete compatiable Nos 8 4,378.00 35,024.00
Bracket UL Listed.
Supply Installation Testing and Commissioning Touchless Request
7 MR to Exit button with detection range from 4 to 12 cm. Nos 8 912.00 7,296.00
Supply Installation Testing and Commissioning Fire Exit panic Bar
8 MR single/double Door with EM lock and required accessories all Nos 8 14,624.00 1,16,992.00
Supply Installation Testing and Commissioning Emergency Door
9 MR Release Button, Gree, Key Resettable, DoublePole Double Throw. Nos 8 659.00 5,272.00
Supply Installation Testing and Commissioning of 8 Core-
conductor20 to 22 AWG.
Supply Installation Testing and Commissioning of AC 3 Core Plain
12 MR Copper conductor, PVC insulated. Mtr 150 54.00 8,100.00
Supplying and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including cutting
13 MR the wall and making good the same in case of recessed conduit as
Total in INR 0.00 6,31,339.00
Digitally signed by AMIT
SINGH 20:48:33 IST
SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES
S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT
S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT
DSR (INR) NON-DSR (INR)
Providing, laying, testing & commissioning of 'C' class
heavy duty MS pipe conforming to IS 3589/IS 1239
including Welding, fittings like elbows, tees, flanges,
18.7 tapers, nuts bolts, gaskets etc. and fixing the pipe on the
1 wall/ceiling with suitable clamp/support frame and
painting with two or more coats of synthetic enamel paint
of required shade complete as required :
Providing, fixing, testing & commissioning of 15mm dia
18.21 quartzoid bulb type sprinklers of rating 68 degree
2 centigrade with required accessories :
18.21.1 Pendant type 514 Each 522.00 268308.00
Supplying, installation, testing & commissioning of
sprinkler flexible pipe (UL Listed) of stainless steel
complete with 15 NPT on reducer thread with maximum
working pressure of 175 PSI test pressure of 875 PSI
3 18.25 (Burst) with branch line (Inlet) 25mm NPT male thread to
sprinkler head (Outlet) 15mm NPT female thread with
reducer, nipple, 2 side brackets, center bracket, stockbar
of following sizes complete as required.
Providing and fixing ISI Marked of approved make Fire
4 Extinguishers complete with all accessories as per
manufacturer's specifications.
a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 8 NOS 12911.83 103294.60
Mechanical Foam gas cartridge type. 9 Kg capacity
ABC dry powder stored pressure type 6 kg capacity
1 Digitally signed by AMIT
SINGH 20:48:33 IST
SCHEDULE OF QUANTIITES: AV SYSTEM
S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount
A. AV System BOARD ROOM ( Second Floor )
98" main LED display SITC of 98" smart 4K LED Display,Native Resolution 3840 x 2160 (UHD),
Brightness Minimum 490cd/m2, Inputs HDMI-3,USB(3.0)-3,USB-(2,0)-
2,OPS Slot-1,RGB-1, LAN-1,SPDIF-1 or Higher, Output Audio-1(
Audio out to connect additional Speakers if required) , Built in Touch type IR
spread /P Cap/Incell/Inglass, Touch Accuracy ±1.5mm or less, Operating
System Support Windows 7/8/10/Windows XP/Linux/Mac/Android
(Windows XP/Linux/Mac Support one point touch) , Multi touch point Min 20
Points or Higher, White Board ,Writing, Pen, Palm Eraser ,Save, Screen
1 Capture, Storage, Tool Bar, Air Class etc , Android 9.0 or better , Internal 1 Nos. 16,99,200.00 16,99,200.00
Memory (32GB),(Hisi 811, Dual core A73+Dual core A53), DDR(4GB), Wi-
Fi, Power Indicator, or higher, Screen Share/Mira cast to Connect
TAB/Mobile, Web Browser , 100-240V~, 50/60Hz, 32W(16W x 2) or higher
, ISO9001, ISO14001,ISO45001,
The display should be a smart screen and touch enabled alongwith
stylus/pen. The display should also have provision for OPS PC.
55" main LED display SITC of 55" smart 4K LED Display,Native Resolution 3840 x 2160,
Brightness Minimum 390cd/m2, Inputs HDMI-3,USB(3.0)-3,USB-(2,0)-
2,OPS Slot-1,RGB-1, LAN-1,SPDIF-1 or Higher, Output Audio-1(
Audio out to connect additional Speakers if required) , Built in Touch type IR
spread /P Cap/Incell/Inglass, Touch Accuracy ±1.5mm or less, Operating
System Support Windows 7/8/10/Windows XP/Linux/Mac/Android
(Windows XP/Linux/Mac Support one point touch) , Multi touch point Min 20
Points or Higher, White Board ,Writing, Pen, Palm Eraser ,Save, Screen
2 Capture, Storage, Tool Bar, Air Class etc , Android 9.0 or better , Internal 2 Nos. 1,48,500.00 2,97,000.00
Memory (32GB),(Hisi 811, Dual core A73+Dual core A53), DDR(4GB), Wi-
Fi, Power Indicator, or higher, Screen Share/Mira cast to Connect
TAB/Mobile, Web Browser , 100-240V~, 50/60Hz, 20W(10W x 2) or higher
, ISO9001, ISO14001,ISO45001,
The display should be a smart screen and touch enabled alongwith
stylus/pen. The display should also have provision for OPS PC.
USB Camera SITC of 12x optical zoom PTZ camera ,USB/HDMI Video
Output,Sleek and intelligent design, should have Plug & Play USB3.0
3 Connectivity,C rystal clear HD1080P image quality, accurate,smooth 1 Nos. 1,67,000.00 1,67,000.00
and silent PTZ Movement, Preset: 9 via IR remote setting (256 via
RS232), Wide field of view with no video distortion, 1/3 inch high
MICS Supply, Installation, testing and commissioning of wireless digital boundary
layer Microphone with 18 or more channel, RF output 80mW or more,
4 Cardioid pickup pattern, Frequency range : 1880 to 1930 MHz, Connectivity 13 Nos. 1,50,799.00 19,60,387.00
: RJ-45, 256-bit AES Encryption (specifications includes single microphone
set of transmitter and receiver) etc and complete as required.
Digitally signed by AMIT
SINGH 20:48:33 IST
S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount
Charger base Supply, Installation, testing and commissioning of wireless digital
microphone charger, charging capacity : 2 or more simultaneously with
5 lighting indication, Qi charging, Should be from same OEM as of wireless 13 Nos. 27,612.00 3,58,956.00
mic etc and complet required as per specifications.
DSP Supply Installation Testing and Commissioning of digital signal processor
with minimum 14no. Or more Mic / line input with phantom power and AEC
and 8 or more line output, at least 2 channel of USB input and output for
software Video Conferencing,, Should have sampline rate of 48kHz or
6 better, Should be expandable for port expansion. 64x64 or more Dante Input 1 Set 5,12,356.00 5,12,356.00
for Digital audio transfer as per need,should support Control with App via
iOS and Android devices, or any third-party control system, Shall have Built-
in filters, feedback suppression, AGC etc complete as required as per
Ceiling speakers Supply, Installation, testing and commissioning of 6.5" two-way coaxial thin
edge ceiling loudspeaker, 100V transformer power taps : 24,12,6, watts,
Conical dispersion : 145° or more, impedance : 8, low impedance RMS
7 continous power : 30watts, frequency range : 50 Hz - 20 kHz or better, 8 Nos. 8,437.00 67,496.00
frequency response : 60Hz - 20KHz or better etc complete required as per
specifications.
Amplifier Supply, Installation, testing and commissioning of quad channel Amplifier, 4
X 120watt or more, THD+N (@ 1 kHz) : < 0.3%, Technology : Class-D,
Common mode rejection ratio : 70dB or better, Temperature controlled
8 FAN, Switching mode power supply, should have Protection features like : 1 Nos. 1,36,607.00 1,36,607.00
DC Short circuit & Over heating & Over load & Signal limiting etc, Built-in
high pass filter and gain adjustment option etc complete required as per
specifications.
Switcher This HDMI Switcher/ Splitter 8x4 can connect 2HD signal sources with 8HD
display terminals. It can easily split 2-way HD signal sources to 8 HDTVs or
projectors which support HD. It also can amplify the HDMI signal. The two
input HD signal sources can be switched freely. The HDMI Switch/Splitter
2x8 can support highest video resolution 3840x2160/30hz,Compatible with
fully HDMI 1.3/1.4 Specification compliant. buffer HDMI signals at the same
9 time, HDMI or DVI to HDMI cables used for inputs and outputs. Included IR 1 Nos. 3,80,000.00 3,80,000.00
remote adapter for operational flexibility and easy control, no manual
clicking the select button needed. Support single high definition display and
multiple output HD signal sources, such as DVD Players, A/V receiversand
Set Top Boxes, 360 Sky Box Freesat Virgin Bluray Player DVD HDTV
Projector Camcorder HTPC Laptop
Cable Qubi SITC of cable enclosure with tilt up lid Multiregion power socket, , Pass
10 through holes for HDMI, Audio, VGA & LAN connectivity etc. as required 4 Lot 18,500.00 74,000.00
Complete as per specification & as required.
Speaker Cables Supply, installation, testing and commissioning of of 2.5 Sqmm x 2 core
ATC copper Conductor, Insulated Cores,PVC Sheathed Speaker Cables .
CAT6 Cable (DSR Supply, installation, testing and commissioning of of Shielded twisted pair
1.53.1) CAT6 Cable (STP) complete etc as required 4 pair.
Digitally signed by AMIT
SINGH 20:48:33 IST
S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount
Audio Cable Supply, installation, testing and commissioning of of 35' 15–pin HD &
3.6mm Stereo Audio Cable
Audio Cable Supply, installation, testing and commissioning of of 12' 15–pin HD &
3.5mm Stereo Audio Cable
Connectors Supply, installation, testing and commissioning of of Various Connectors
15 For Above Mentioned Configuration etc. all complete. 1 Lot 20,000.00 20,000.00
HDMI Cable SITC of Premium High Speed Gold plated HDMI Cable 15 ft HDMI Cable,
Up to 4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color
19 depth, max. 18.0 Gbps data rate, Material: Tinned copper, 28 AWG and 5 Nos. 2,741.00 13,705.00
also to comply the detailed technical specifications as attached
20 USB Extender SITC of USB cables Extendre 10 meters etc all compelte 1 Nos. 8,500.00 8,500.00
21 Rack Supply, installation, Testing and Commisioing of 12 U Rack 2 Nos. 27,411.00 54,822.00
B. AV System MD Room
65" main LED display SITC of 65" smart 4K LED Display,Native Resolution 3840 x 2160,
Brightness Minimum 390cd/m2, Inputs HDMI-3,USB(3.0)-3,USB-(2,0)-
2,OPS Slot-1,RGB-1, LAN-1,SPDIF-1 or Higher, Output Audio-1(
Audio out to connect additional Speakers if required) , Built in Touch type IR
spread /P Cap/Incell/Inglass, Touch Accuracy ±1.5mm or less, Operating
System Support Windows 7/8/10/Windows XP/Linux/Mac/Android
(Windows XP/Linux/Mac Support one point touch) , Multi touch point Min 20
Points or Higher, White Board ,Writing, Pen, Palm Eraser ,Save, Screen
Capture, Storage, Tool Bar, Air Class etc , Android 9.0 or better , Internal
Memory (32GB),(Hisi 811, Dual core A73+Dual core A53), DDR(4GB), Wi-
Fi, Power Indicator, or higher, Screen Share/Mira cast to Connect
TAB/Mobile, Web Browser , 100-240V~, 50/60Hz, 20W(10W x 2) or higher
, ISO9001, ISO14001,ISO45001,
The display should be a smart screen and touch enabled alongwith
stylus/pen. The display should also have provision for OPS PC.
USB Camera SITC of 12x optical zoom PTZ camera ,USB/HDMI Video
Output,Sleek and intelligent design, should have Plug & Play USB3.0
Connectivity,C rystal clear HD1080P image quality, accurate,smooth
and silent PTZ Movement, Preset: 9 via IR remote setting (256 via
RS232), Wide field of view with no video distortion, 1/3 inch high
quality, 2.38MP (16:9) CMOS sensor, with Full Glass Lens Material,
2 should support ceiling mount, wall mount and tripod mount (Reverse 1 Nos. 1,67,000.00 1,67,000.00
mountable), 2D and 3D NR for best video quality in different lighting
conditions, should support Visca, Pelco-P, and Pelco-D protocol,
RS232/RS485 Camera Control, should be compatible with most
leading video conferencing software and platform etc all complete.
Digitally signed by AMIT
SINGH 20:48:33 IST
S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount
HDMI Cable SITC of Premium High Speed Gold plated HDMI Cable 15 ft HDMI Cable,
Up to 4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color
5 depth, max. 18.0 Gbps data rate, Material: Tinned copper, 28 AWG and 1 Nos. 2,741.00 2,741.00
also to comply the detailed technical specifications as attached
6 USB Extender SITC of USB cables Extendre 10 meters etc all compelte 1 Nos. 8,500.00 8,500.00
Active speakers Supply installatyion testing and commissioning of Active speaker pair of 35
watt, Transducers: LF: 135 mm (5.25 in) low frequency loudspeaker HF: 19
mm (.75 in) Polycarbonate dome tweeter Frequency Range: 80 Hz - 20 kHz
Amplifier Power: 35 Watts per channel Maximum SPL Per Pair: 115 dB
Crossover Frequency: 4.2 kHz
Input Sensitivity: +4 dBu XLR 1/4"; 0 dBu RCA
Signal Input Connectors (x2): Balanced Neutrik* Combo XLR 1/4" TRS;
Unbalanced RCA Power Requirements: 19 VDC / 3.42 A - use only
supplied power supply
Headphone Jack: 3.5 mm (1/8") Dimensions: 235 x 159 x 143 mm (9.3 x 6.3
x 5.6 in). tudio quality transducers for accuracy, and rich bass response: 80
7 35 watt per-channel power amplifier and high sensitivity drivers produce 1 Pair 21,000.00 21,000.00
exceptional output: 115 DB max SPL per pair Balanced XLR, ¼”, and
unbalanced RCA inputs allow connection to a range of signal sources
Stereo headphone jack allows monitoring using headphones Ergonomic,
side-mounted volume control - simultaneously controls left and right
speakers High frequency adjust control - allows the user to contour HF
response to application requirements
Magnetically-shielded transducers for use near CRT monitors and
magnetically sensitive equipment Internal peak limiter and overload
protection circuit - protects the system from damage caused by continuous
Wall-mount capable using optional MTC-2P mounting kit
Included snap-on pedestals optimize listening angle
C. AV System -VC Room
Digitally signed by AMIT
SINGH 20:48:33 IST
S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount
75" main LED display SITC of 75" smart 4K LED Display,Native Resolution 3840 x 2160 (UHD),
Brightness Minimum 390cd/m2, Inputs HDMI-3,USB(3.0)-3,USB-(2,0)-
2,OPS Slot-1,RGB-1, LAN-1,SPDIF-1 or Higher, Output Audio-1(
Audio out to connect additional Speakers if required) , Built in Touch type IR
spread /P Cap/Incell/Inglass, Touch Accuracy ±1.5mm or less, Operating
System Support Windows 7/8/10/Windows XP/Linux/Mac/Android
(Windows XP/Linux/Mac Support one point touch) , Multi touch point Min 20
Points or Higher, White Board ,Writing, Pen, Palm Eraser ,Save, Screen
Capture, Storage, Tool Bar, Air Class etc , Android 9.0 or better , Internal
Memory (32GB),(Hisi 811, Dual core A73+Dual core A53), DDR(4GB), Wi-
Fi, Power Indicator, or higher, Screen Share/Mira cast to Connect
TAB/Mobile, Web Browser , 100-240V~, 50/60Hz, 20W(10W x 2) or higher
, ISO9001, ISO14001,ISO45001,
The display should be a smart screen and touch enabled alongwith
stylus/pen. The display should also have provision for OPS PC.
VC SITC of Full HD Video Conferencing System endpoints (codecs), capable
of multi-party conferencing Minimum (1+5) Party. the codec shall have
minimum 2 video inputs (1 x HDMI and 1 x HDMI/as per OEM's camera),
minimum 2 x HDMI video outputs, output resolution supported shall be
minimum upto 1920 x1080, 30 fps (Tx and Rx).. Audio Inputs- Min 3 x IP
Microphone, 1 X HDMI/1 X 3.5mm stereo line in; Audio Outputs- 1 x HDMI,
HDMI Cable SITC of Premium High Speed Gold plated HDMI Cable 15 ft HDMI Cable,
Up to 4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color
5 depth, max. 18.0 Gbps data rate, Material: Tinned copper, 28 AWG and 1 Nos. 2,741.00 2,741.00
also to comply the detailed technical specifications as attached
6 USB Extender SITC of USB cables Extendre 10 meters etc all compelte 1 Nos. 8,500.00 8,500.00
Digitally signed by AMIT
SINGH 20:48:33 IST
S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount
Active speakers Supply installatyion testing and commissioning of Active speaker pair of 35
watt, Transducers: LF: 135 mm (5.25 in) low frequency loudspeaker HF: 19
mm (.75 in) Polycarbonate dome tweeter Frequency Range: 80 Hz - 20 kHz
Amplifier Power: 35 Watts per channel Maximum SPL Per Pair: 115 dB
Crossover Frequency: 4.2 kHz
Input Sensitivity: +4 dBu XLR 1/4"; 0 dBu RCA
Signal Input Connectors (x2): Balanced Neutrik* Combo XLR 1/4" TRS;
Unbalanced RCA Power Requirements: 19 VDC / 3.42 A - use only
supplied power supply
Headphone Jack: 3.5 mm (1/8") Dimensions: 235 x 159 x 143 mm (9.3 x 6.3
x 5.6 in). tudio quality transducers for accuracy, and rich bass response: 80
7 35 watt per-channel power amplifier and high sensitivity drivers produce 1 Pair 21,000.00 21,000.00
exceptional output: 115 DB max SPL per pair Balanced XLR, ¼”, and
unbalanced RCA inputs allow connection to a range of signal sources
Stereo headphone jack allows monitoring using headphones Ergonomic,
side-mounted volume control - simultaneously controls left and right
speakers High frequency adjust control - allows the user to contour HF
response to application requirements
Magnetically-shielded transducers for use near CRT monitors and
magnetically sensitive equipment Internal peak limiter and overload
protection circuit - protects the system from damage caused by continuous
Wall-mount capable using optional MTC-2P mounting kit
Included snap-on pedestals optimize listening angle
D. & E AV System Small Meeting Room x 2 Nos
65" main LED display SITC of 65" smart 4K LED Display,Native Resolution 3840 x 2160,
Brightness Minimum 390cd/m2, Inputs HDMI-3,USB(3.0)-3,USB-(2,0)-
2,OPS Slot-1,RGB-1, LAN-1,SPDIF-1 or Higher, Output Audio-1(
Audio out to connect additional Speakers if required) , Built in Touch type IR
spread /P Cap/Incell/Inglass, Touch Accuracy ±1.5mm or less, Operating
System Support Windows 7/8/10/Windows XP/Linux/Mac/Android
(Windows XP/Linux/Mac Support one point touch) , Multi touch point Min 20
Points or Higher, White Board ,Writing, Pen, Palm Eraser ,Save, Screen
Capture, Storage, Tool Bar, Air Class etc , Android 9.0 or better , Internal
Memory (32GB),(Hisi 811, Dual core A73+Dual core A53), DDR(4GB), Wi-
Fi, Power Indicator, or higher, Screen Share/Mira cast to Connect
TAB/Mobile, Web Browser , 100-240V~, 50/60Hz, 20W(10W x 2) or higher
, ISO9001, ISO14001,ISO45001,
The display should be a smart screen and touch enabled alongwith
stylus/pen. The display should also have provision for OPS PC.
HDMI Cable SITC of Premium High Speed Gold plated HDMI Cable 15 ft HDMI Cable,
Up to 4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color
2 depth, max. 18.0 Gbps data rate, Material: Tinned copper, 28 AWG and 2 Nos. 2,741.00 5,482.00
also to comply the detailed technical specifications as attached
Digitally signed by AMIT
SINGH 20:48:33 IST
S.No. Item Description Item Description Qty Unit Rate DSR Amount Non DSR Amount
3 USB Extender SITC of USB cables Extendre 10 meters etc all compelte 2 Nos. 8,500.00 17,000.00
I. Reception, ED, Director, Cafeteria, Library, Lounge
55" SITC of 55" smart 4K LED Display,Native Resolution 3840 x 2160,
Brightness Minimum 390cd/m2, Inputs HDMI-3,USB(3.0)-3,USB-(2,0)-
2,OPS Slot-1,RGB-1, LAN-1,SPDIF-1 or Higher, Output Audio-1(
Audio out to connect additional Speakers if required) , Built in Touch type IR
spread /P Cap/Incell/Inglass, Touch Accuracy ±1.5mm or less, Operating
System Support Windows 7/8/10/Windows XP/Linux/Mac/Android
(Windows XP/Linux/Mac Support one point touch) , Multi touch point Min 20
Points or Higher, White Board ,Writing, Pen, Palm Eraser ,Save, Screen
Capture, Storage, Tool Bar, Air Class etc , Android 9.0 or better , Internal
Memory (32GB),(Hisi 811, Dual core A73+Dual core A53), DDR(4GB), Wi-
Fi, Power Indicator, or higher, Screen Share/Mira cast to Connect
TAB/Mobile, Web Browser , 100-240V~, 50/60Hz, 20W(10W x 2) or higher
, ISO9001, ISO14001,ISO45001,
The display should be a smart screen and touch enabled alongwith
stylus/pen. The display should also have provision for OPS PC.
HDMI Cable SITC of Premium High Speed Gold plated HDMI Cable 15 ft HDMI Cable,
Up to 4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color
2 depth, max. 18.0 Gbps data rate, Material: Tinned copper, 28 AWG and 15 Nos. 2,741.00 41,115.00
also to comply the detailed technical specifications as attached
I. GM/DGM Room
43” SITC of 43” smart 4K LED Display,Native Resolution 3840 x 2160,
Brightness Minimum 390cd/m2, Inputs HDMI-3,USB(3.0)-3,USB-(2,0)-
2,OPS Slot-1,RGB-1, LAN-1,SPDIF-1 or Higher, Output Audio-1(
Audio out to connect additional Speakers if required) , Built in Touch type IR
spread /P Cap/Incell/Inglass, Touch Accuracy ±1.5mm or less, Operating
System Support Windows 7/8/10/Windows XP/Linux/Mac/Android
(Windows XP/Linux/Mac Support one point touch) , Multi touch point Min 20
Points or Higher, White Board ,Writing, Pen, Palm Eraser ,Save, Screen
Capture, Storage, Tool Bar, Air Class etc , Android 9.0 or better , Internal
Memory (32GB),(Hisi 811, Dual core A73+Dual core A53), DDR(4GB), Wi-
Fi, Power Indicator, or higher, Screen Share/Mira cast to Connect
TAB/Mobile, Web Browser , 100-240V~, 50/60Hz, 20W(10W x 2) or higher
, ISO9001, ISO14001,ISO45001,
The display should be a smart screen and touch enabled alongwith
stylus/pen. The display should also have provision for OPS PC.
HDMI Cable SITC of Premium High Speed Gold plated HDMI Cable 15 ft HDMI Cable,
Up to 4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color
2 depth, max. 18.0 Gbps data rate, Material: Tinned copper, 28 AWG and 30 Nos. 2,741.00 82,230.00
also to comply the detailed technical specifications as attached
Digitally signed by AMIT
SINGH 20:48:33 IST
SCHEDULE OF QUANTITIES-ART WORKS
S NO MR DESCRIPTION QUANTITY UNIT RATE
DSR (INR) NON DSR (INR)
Hand painting directly on wallCreating design and creation of Art work
concept on given subject. With initial visit to site, preparation of various
designs with different material, providing the samples, layout for
1 MR approval, improvisation in short listed creative’s and making of final 10 Sqm 14145.00 141450.00
layout for final production by enlargement of drawing as per ratio of
actual size, to prepare detailed working shop drawings (full scale)
based on the Concept drawings .
Canvas paintings (oil /acrylic medium) Creating design and creation of
Art work concept on given subject. With initial visit to site, preparation
of various designs with different material, providing the samples, layout
for approval, improvisation in short listed creative’s and making of final
layout for final production by enlargement of drawing as per ratio of
actual size, to prepare detailed working shop drawings (full scale)
based on the Concept drawings / Views / site conditions.
Mixed media mural Wood/metal/fiberglass/terracotta /tiles or anything
other medium artist find suitable as long as it is permanent in
nature. Creating design and creation of Art work concept on given
subject. With initial visit to site, preparation of various designs with
different material, providing the samples, layout for approval,
3 MR improvisation in short listed creative’s and making of final layout for 5 Sqm 7159.00 35795.00
final production by enlargement of drawing as per ratio of actual size,
to prepare detailed working shop drawings (full scale) based on the
Concept drawings / Views / site conditions ,Display of actual size
dummy /mock up Fabricated in sun board with digital print for client
TOTAL ART WORKS 0.00 392525.00
Digitally signed by AMIT
SINGH 20:48:33 IST
SCHEDULE OF QUANTITIES: FURNITURE
S No Item Item Description Qty Unit Rate Amount Reference Image
Supplying and placing in position Main desk of the following specifications. The Main table shall be of size
3600 Width mm x 1080 mm Depth x 750 mm height. Top surface of the table shall made up of MDF
(Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should
contain in Smart Case - space slides effortlessly in style.The mobile Pedestal shall be of size 480 Width mm
x 640 Depth mm x 600 Height mm. Mobile pedestal shall be coated of MDF (medium density fiber ) with
veneer coating and PU coating.The ERU Top shall be of MDF (medium density fiber) board duly finished
MD Main with veneer and final PU coating. Size of ERU top 1900 Width mm x 480 Depth mm x 550(not from ground
Table with castors).The main desk is provided eith the wire management system also there is perfect storage side
unit .Complete all as per the direction of Engineer in Charge.
Providing and placing in position Back Unit. The back unit shall be made up of MDF board duly finished with
veneer & final finish by PU coating. Below storage shall be provided with wooden shutters & the upper left &
right side of the back unit shall also be provided with wooden shutters. The middle 3 door shutters should be
MD Back of glass of minimum 5mm thick for display purpose. The hardness of the PU coating shall be 1.5H. The
Unit overall dimensions of the back unit shall be 2215mm x 410mm x 2000mm. Complete all as per the direction
of Engineer in Charge.
Providing and placing in position High back chair.The seat shall be made up of 1.2 +/- 0.1 cm thick hot
pressed plywood & upholstered with leather and moulded polyurethane foam. The back shall be designed
with contoured lumber support for extra comfort. Size of back shall be W-53cm, H-95.4cm & size of seat
shall be W-54.6cm x D-49cm. High Resilience (HR) foam should be used in making seat & back which shall
be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression.
The seat and back should be arrested together with spine made of 0.8 +/- 0.05 cm thick HR steel and should
be powder coated in black with 40-60 micron DFT (Dry film thickness). The armrest assembly should be
made up of armrest tube, PU armrest and the armrest top. The armrest tube assy. shall be made of 2.54+/-
0.03cm x 0.16 +/- 0.0128 cm M.S E.R.W support tubes and chrome plated. The P.U armrest shall be made
up of black integral skin polyurethane with 50-70 shore 'A' hardness reinforced with M.S insert. The armrest
top shall be made up of ABS & upholstered with foam & leather. It shsall have front Pivot synchro tilt
mechanism. The mechanism of the chair shall have following features : 360⁰ revolving type, Knee Tilt
MD High system, Seat & back tilting ration of 1: 1.5, Front pivot for tilt with feet resting on ground ensuring more
back Chair comfort, Tilt tension adjustment, 5-position locking with antilock back mechanism which should prevent the
backrest from impacting the user when the lock is released, Static seat depth adjustment 5.0 +/- 0.5cm with
5 position locking. The chair shall be provided with pneumatic height adjustment which shall have stroke of
9.0 +/- 0.3 cm. The bellow should be single piece duly blow moulded in black polypropylene. The pedestal
shall be made of die-cast aluminium with buffing finish. it shall be fitted with 5 nos twin wheel castor. The
size of the pedestal shall be 67.0 +/- 0.5 cm pitch-centre-dia (77.0 +/- 1.0 cm with castors). The twin wheel
castors shall be made of Nylon injection moulded in black color. Overall dimensions of Chair shall be, Width
of Chair - 77cm, Depth of Chair - 77 cm as measured from pedestal below. Height of back from ground - min
128.0 to max 137.0 cms. Seat height - min 49.9cm to max 58.9 cm. Dimensions tolerance / variations shall
be within +/- 1 cm. Complete all as per the direction of Engineer in Charge.
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and placing in position revolving visitor chair.The seat shall be made up of 1.2 +/- 0.1 cm thick hot
pressed plywood & upholstered with leather and moulded polyurethane foam. The back shall be designed
with contoured lumber support for extra comfort. Size of back shall be W-53cm, H-73cm & size of seat shall
be W-54.6cm x D-49cm. High Resilience (HR) foam should be used in making seat & back which shall be
moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression.
The seat and back should be arrested together with spine made of 0.8 +/- 0.05 cm thick HR steel and should
be powder coated in black with 40-60 micron DFT (Dry film thickness). The armrest assembly should be
made up of armrest tube, PU armrest and the armrest top. The armrest tube assy. shall be made of 2.54+/-
0.03cm x 0.16 +/- 0.0128 cm M.S E.R.W support tubes and chrome plated. The P.U armrest shall be made
up of black integral skin polyurethane with 50-70 shore 'A' hardness reinforced with M.S insert. The armrest
top shall be made up of ABS & upholstered with foam & leather. The mechanism of the chair shall have
following features : 360⁰ revolving type without back tilt. The chair shall be provided with pneumatic height
adjustment which shall have stroke of 12.0 +/- 0.3 cm. The beloow should be made up of 3 piece telescopic
type & injection moulded in black polypropylene. The pedestal shall be made of die-cast aluminium with
buffing finish. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 67.0 +/- 0.5 cm
pitch-centre-dia (77.0 +/- 1.0 cm with castors). The twin wheel castors shall be made of Nylon injection
moulded in black color. Overall dimensions of Chair shall be, Width of Chair - 77cm, Depth of Chair - 77 cm
as measured from pedestal below. Height of back from ground - min 99.4 to max 111.4 cms. Seat height -
min 43.4cm to max 55.4 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Complete all as per
the direction of Engineer in Charge.
Providing and Placing in position of Three seater long sofa has been designed for a fun family get-together.
Crafted from sheesham acacia, it features cane bunai work while the upholstered seats are fitted on a
slatted base1.8m x 69cm x 69cm. Bunai 3 Seater Sofa
Providing and Placing in position of Two seater long sofa has been designed for a fun family get-together.
Crafted from sheesham acacia, it features cane bunai work while the upholstered seats are fitted on a
slatted base1.8m x 69cm x 69cm. Bunai 2 Seater Sofa
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and Placing in position of Single seater long sofa has been designed for a fun family get-together.
Crafted from sheesham acacia, it features cane bunai work while the upholstered seats are fitted on a
slatted base. Bunai 1 Seater Sofa
Providing and placing in position Centre Table having a size of : 1000mm(L) x 600mm(D) x 425mm(H).
Understructure of the table which includes Legs, top wooden frame & bottom tie members are made out of
first quality rubberwood of approved make without knots &defects on all faces. Bottom tray is made of
1.2mm thick MS sheet. Metal brackets are used for assembly purpose. Top: 8mm thick toughened glass of
approved make. Construction: Knock-down assembly.Wooden members are PU painted with hardness-2H.
8 Metal components are powder coated. Bottom MS metal tray is having floral pattern laser-cut. Top glass is 2 28023.00 56046.00
having sand blasted floral pattern on bottom surface 5. Hardware: Knock-down assembly with high quality
standard hardware like screws, metal inserts, wooden dowel, plastic leg bush. Complete all as per the
dimension of Engineer-in-charge. OEM should be ISO-9001, 14001, 18001, 45001, 50001, Greenguard
BIFMA and AIOTA certified.Complete all as per the direction of Engineer in Charge.
Providing and placing in position Corner Table having a size of : 500mm(L) x 500mm(D) x 425mm(H).
Understructure of the table which includes Legs, top wooden frame & bottom tie members are made out of
first quality rubberwood of approved make without knots &defects on all faces. Bottom tray is made of
1.2mm thick MS sheet. Metal brackets are used for assembly purpose. Top: 8mm thick toughened glass of
approved make. Construction: Knock-down assembly.Wooden members are PU painted with hardness-2H.
MD corner Metal components are powder coated. Bottom MS metal tray is having floral pattern laser-cut. Top glass is
Table having sand blasted floral pattern on bottom surface 5. Hardware: Knock-down assembly with high quality
standard hardware like screws, metal inserts, wooden dowel, plastic leg bush. Complete all as per the
dimension of Engineer-in-charge. OEM should be ISO-9001, 14001, 18001, 45001, 50001, Greenguard
BIFMA and AIOTA certified.Complete all as per the direction of Engineer in Charge.
Providing and placing in position 10 Seater Conference table.The overall size of the wortop shall be
3000mm x 1150mm x 740mm. Worktop shall be made from 25mm thick MDF one side prelaminate board
with 0.4mm PVC membrane pressed on to top and having chamfered edge. Soft closing dual access flap
provided for access to power supply and data cables. The Under-structure consists of mixture of 25mm and
18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge
MD banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at
10 Conference bottom edges for improving the aesthetics.The product has a knock-down construction. A wire raiser made 1 72070.00 72070.00
table of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and
cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside
each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA-
A,etc). The product must be UL Greenguard certified.Complete all as per the direction of Engineer in
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and placing in position High back chair.The seat shall be made up of 1.2 +/- 0.1 cm thick hot
pressed plywood & upholstered with leather and moulded polyurethane foam. The back shall be designed
with contoured lumber support for extra comfort. Size of back shall be W-53cm, H-95.4cm & size of seat
shall be W-54.6cm x D-49cm. High Resilience (HR) foam should be used in making seat & back which shall
be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression.
The seat and back should be arrested together with spine made of 0.8 +/- 0.05 cm thick HR steel and should
be powder coated in black with 40-60 micron DFT (Dry film thickness). The armrest assembly should be
made up of armrest tube, PU armrest and the armrest top. The armrest tube assy. shall be made of 2.54+/-
0.03cm x 0.16 +/- 0.0128 cm M.S E.R.W support tubes and chrome plated. The P.U armrest shall be made
up of black integral skin polyurethane with 50-70 shore 'A' hardness reinforced with M.S insert. The armrest
top shall be made up of ABS & upholstered with foam & leather. It shsall have front Pivot synchro tilt
MD mechanism. The mechanism of the chair shall have following features : 360⁰ revolving type, Knee Tilt
Conference system, Seat & back tilting ration of 1: 1.5, Front pivot for tilt with feet resting on ground ensuring more
High back comfort, Tilt tension adjustment, 5-position locking with antilock back mechanism which should prevent the
chair backrest from impacting the user when the lock is released, Static seat depth adjustment 5.0 +/- 0.5cm with
5 position locking. The chair shall be provided with pneumatic height adjustment which shall have stroke of
9.0 +/- 0.3 cm. The bellow should be single piece duly blow moulded in black polypropylene. The pedestal
shall be made of die-cast aluminium with buffing finish. it shall be fitted with 5 nos twin wheel castor. The
size of the pedestal shall be 67.0 +/- 0.5 cm pitch-centre-dia (77.0 +/- 1.0 cm with castors). The twin wheel
castors shall be made of Nylon injection moulded in black color. Overall dimensions of Chair shall be, Width
of Chair - 77cm, Depth of Chair - 77 cm as measured from pedestal below. Height of back from ground - min
128.0 to max 137.0 cms. Seat height - min 49.9cm to max 58.9 cm. Dimensions tolerance / variations shall
be within +/- 1 cm. Complete all as per the direction of Engineer in Charge.
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and placing in position revolving visitor chair.The seat shall be made up of 1.2 +/- 0.1 cm thick hot
pressed plywood & upholstered with leather and moulded polyurethane foam. The back shall be designed
with contoured lumber support for extra comfort. Size of back shall be W-53cm, H-73cm & size of seat shall
be W-54.6cm x D-49cm. High Resilience (HR) foam should be used in making seat & back which shall be
moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression.
The seat and back should be arrested together with spine made of 0.8 +/- 0.05 cm thick HR steel and should
be powder coated in black with 40-60 micron DFT (Dry film thickness). The armrest assembly should be
made up of armrest tube, PU armrest and the armrest top. The armrest tube assy. shall be made of 2.54+/-
0.03cm x 0.16 +/- 0.0128 cm M.S E.R.W support tubes and chrome plated. The P.U armrest shall be made
up of black integral skin polyurethane with 50-70 shore 'A' hardness reinforced with M.S insert. The armrest
MD top shall be made up of ABS & upholstered with foam & leather. The mechanism of the chair shall have
Conference following features : 360⁰ revolving type without back tilt. The chair shall be provided with pneumatic height
Mid back adjustment which shall have stroke of 12.0 +/- 0.3 cm. The beloow should be made up of 3 piece telescopic
chair type & injection moulded in black polypropylene. The pedestal shall be made of die-cast aluminium with
buffing finish. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 67.0 +/- 0.5 cm
pitch-centre-dia (77.0 +/- 1.0 cm with castors). The twin wheel castors shall be made of Nylon injection
moulded in black color. Overall dimensions of Chair shall be, Width of Chair - 77cm, Depth of Chair - 77 cm
as measured from pedestal below. Height of back from ground - min 99.4 to max 111.4 cms. Seat height -
min 43.4cm to max 55.4 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Complete all as per
the direction of Engineer in Charge.
Providing and placing in position of main table with overall size of table 2350 x 2350 x 750mm. The main
table shall be of size 2350 x 1150 x 750mm. The side unit shall be 1200 x 600 x 750mm. The table is made
of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC
membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface
for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to
IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick
MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to
top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved
Director Main shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-
table laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC
lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane
pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long
metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam
mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for
security.Complete all as per the direction of Engineer in Charge.
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and placing in position back unit.The Back Unit shall be of dimensions 2350 x 500 x 1800mm. It
shall be made of 25mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm
PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of
E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters are made of
Director 25mm thick MDF one side pre laminate board with 0.4mm PVC membrane pressed on top. Shutters have a
14 soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock 2 89478.00 178956.00
for security.Complete all as per the direction of Engineer in Charge.
Providing and placing in position High back chair.The seat shall be made up of 1.2 +/- 0.1 cm thick hot
pressed moulded reconstituted wood & upholstered with leather and moulded polyurethane foam. Size of
back shall be (W)-46.0cm, (H)-57.0cm & size of seat shall be (W)-49.0cm x (D)-49.5cm. High Resilience
(HR) foam should be used in making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and
hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The back rest should be connected to the
mechanism with a drop-lift mechanism which can be adjusted in the range of 7.0+/-0.5cm for the comfortable
back support to suitable individual need. Armrests should be pressure die casted in polished aluminium with
PP arm tops. The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt
ratio of 1:3, Synchronized tilt, Back tilt with 4 position locking and Side tilt tension adjustment knob should be
15 operated while taking back support for better adjustment of comfort. The chair shall be provided with 2 73911.00 147822.00
pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-
cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of head rest shall be
(W)26.0cm x 12.0cm(L). The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm
with castors). The twin wheel castors shall be injection moulded in black polypropylene. Overall dimensions
of Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below.
Height from ground - min 113.5 to max 138.0 cms. Seat height - min 41.0cm to max 51.0 cm. Dimensions
tolerance / variations shall be within +/- 1 cm. Complete all as per the direction of Engineer in Charge.
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and placing in position revolving visitor.The seat shall be made up of 1.2 +/- 0.1 cm thick hot
pressed moulded reconstituted wood & upholstered with leather and moulded polyurethane foam. The back
shall be designed with contoured lumber support for extra comfort. Size of back shall be (W)-45.0cm, (H)-
49.0cm & size of seat shall be (W)-49.0cm x (D)-49.5cm. High Resilience (HR) foam should be used in
making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as
per IS: 7888 for 25% compression. The back rest should be connected to the mechanism with a drop-lift
mechanism which can be adjusted in the range of 7.0+/-0.5cm for the comfortable back support to suitable
individual need. Armrests should be pressure die casted in polished aluminium with PP arm tops. The
mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:3,
Synchronized tilt, Back tilt with 4 position locking and Side tilt tension adjustment knob should be operated
while taking back support for better adjustment of comfort. The chair shall be provided with pneumatic height
adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished
aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm
pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black
polypropylene. Overall dimensions of Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as
measured from pedestal below. Height from ground - min 93.5 to max 110.5 cm. Seat height - min 41.0cm
to max 51.0 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Complete all as per the direction
of Engineer in Charge.
Providing and Placing in position of Three seater long sofa has been designed for a fun family get-together.
Crafted from sheesham acacia, it features cane bunai work while the upholstered seats are fitted on a
slatted base1.8m x 69cm x 69cm. Bunai 3 Seater Sofa
Providing and Placing in position of Single seater long sofa has been designed for a fun family get-together.
Crafted from sheesham acacia, it features cane bunai work while the upholstered seats are fitted on a
slatted base. Bunai 1 Seater Sofa
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and placing in position Centre table.The Glass shall be 10+/-0.3mm thick black tinted toughened
glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded
assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be
Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.Complete all as per the direction of Engineer in
Director Charge.
Providing and placing in position Corner table. The Glass shall be 10+/-0.3mm thick black tinted toughened
glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded
assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be
Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.Complete all as per the direction of Engineer in
Director Charge.
Providing and placing in position of main table with overall size of table 2350 x 2350 x 750mm. The main
table shall be of size 2350 x 1150 x 750mm. The side unit shall be 1200 x 600 x 750mm. The table is made
of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC
membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface
for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to
IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick
MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to
top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved
21 shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre- 6 132869.00 797214.00
laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC
lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane
pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long
metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam
mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for
security.Complete all as per the direction of Engineer in Charge.
Providing and placing in position back unit.The Back Unit shall be of dimensions 2350 x 500 x 1150mm. It
shall be made of 25mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm
PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of
ED Back E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters have a soft
Unit closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for
security.Complete all as per the direction of Engineer in Charge.
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and Placing in Position High Back Chair. The cushioned seats shall be made of injection moulded
plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance
polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of
compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up
of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered
with pure leather. Back size shall be 47.5 cm W x 77 cm D. The armrest top shall be moulded from
polurethane, and shall be upholstered with pure leather and mounted on ot a drop lift adjustable type tubular
armrest support made up of Ø3.81±0.03 cm x 0.2±0.01 cm thick MS ERW tube having chrome plated finish.
The armrest hieght shall be adjustable upto 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism shall be
designed with the following features : 360° revolving type, front-pivot for tilt with feet resting on ground and
ED High contionuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating
23 position, 5-position tilt limiter giving options of variable tilt angle to the chair, seat/backtilting ratio 1:2, the 6 50768.00 304608.00
mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment shall be
integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be 6.0±0.5 cm. Back
frame shall be connected to the up/down mechanism housed in plastic T spine. It can be adjusted in the
range of 7.42±0.5 cm for the comfortable back support to suit individual need. the pneumatic height
adjustment shall have an adjustment stroke of 10±0.3 cm. The pedestal shall be high pressure die cast
polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch
centre dia. 5 nos. of twin wheel castors shall be injection moulded in plastic having 6.0±0.1 cm wheel
diameter and assembled to pedestal.Complete all as per the direction of Engineer in Charge.
Providing and Placing in Position Mid Back Chair. The overall dimensions shall be 76.1cm x 76.1cm x 96.5-
114cm. Seat height shall be 44.5cm - 54.5cm. The cushioned seats shall be made of injection moulded
plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance
polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of
compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up
of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered
with pure leather. The armrest top shall be moulded from polurethane, and shall be upholstered with pure
leather and mounted on ot a drop lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x
0.2±0.01 cm thick MS ERW tube having chrome plated finish. The armrest hieght shall be adjustable upto
6.5±0.5 cm in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360°
revolving type, front-pivot for tilt with feet resting on ground and contionuous lumbar support ensuring more
ED revolving comfort, Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of
visitor chair variable tilt angle to the chair, seat/backtilting ratio 1:2, the mechanism housing is made up of HPDC
aluminium black powder coated. Seat depth adjustment shall be integrated in the seat through a sliding
mechanism. Seat depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected to the
up/down mechanism housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the
comfortable back support to suit individual need. the pneumatic height adjustment shall have an adjustment
stroke of 10±0.3 cm. The pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos.
of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall
be injection moulded in plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal.Complete all
as per the direction of Engineer in Charge.
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and Placing in position of Two seater long sofa has been designed for a fun family get-together.
Crafted from sheesham acacia, it features cane bunai work while the upholstered seats are fitted on a
slatted base1.8m x 69cm x 69cm. Bunai 2 Seater Sofa
Providing and placing in position of Single seater long sofa has been designed for a fun family get-together.
Crafted from sheesham acacia, it features cane bunai work while the upholstered seats are fitted on a
slatted base. Bunai 1 Seater Sofa
Providing and placing in position Centre table.The Glass shall be 10+/-0.3mm thick black tinted toughened
glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded
assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be
Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.Complete all as per the direction of Engineer in
ED Centre Charge.
Providing and placing in position Corner table. The Glass shall be 10+/-0.3mm thick black tinted toughened
glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded
assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be
ED Corner Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.Complete all as per the direction of Engineer in
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and placing in position of main table with overall size of table 2100 x 2250 x 750mm. The main
table shall be of size 2100 x 1050 x 750mm. The side unit shall be 1200 x 500 x 750mm. The table is made
of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC
membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface
for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to
IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick
MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to
top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved
GM/DGM shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-
Main Table laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC
lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane
pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long
metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam
mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for
security.Complete all as per the direction of Engineer in Charge.
The Back Unit shall be of dimensions 1800 x 500 x 1150mm. It shall be made of 25mm thick MDF – one
side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The
Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge
GM/DGM banded with matching 2 mm thick PVC lipping. Shutters have a soft closing & anti slam mechanism.
30 Handles are provided for ease of opening. Storage is provided with lock for security. 32 67780.00 2168960.00
Providing and Placing in position High Back Chair with overall size of 76.1 cm W x 76.1 cm D x 112.7 –
130.2 cm H x 43.1 – 53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer
& inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density
45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x
48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size
1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The
armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest
support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The
armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with
GM/DGM following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar
31 High back support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt 32 25682.00 821824.00
chair limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is
made up of HPDC aluminium black powder coated. Seat depth adjustment is integrated in the seat through a
sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down
mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back
support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm.
The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. The
pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection
molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal. Complete all as per the
direction of Engineer in Charge.
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and placing in position mid Back Chair with overall size of 76.1 cm W x 76.1 cm D x 96.5 – 114
cm H x 43.1 – 53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer &
inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density
45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x
48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size
1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The
armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest
support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The
armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with
GM/DGM following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar
32 Mid back support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt 96 23969.00 2301024.00
chair limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is
made up of HPDC aluminium black powder coated. Seat depth adjustment is integrated in the seat through a
sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down
mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back
support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm.
The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. The
pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection
molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal. Complete all as per the
direction of Engineer in Charge.
Providing and placing in position of Single Seater modern appearance crafted of premium wood in a
pleasing tone and matte finish. This sofa is beautifully created to fit in with any decor and was created to
balance utility and design. Upholstery made of the finest cotton fabric further improves the sofa's
aestheticsCoffee Saar 1 Seater Sofa
Corner table in position with sizes 600 mm L x 600mm D x 400 H with completely made of 25mm thick
prelaminated particle. The Table have one pull out drawer and another shelf at lower level. 25mm thick
particle board Top with edges sealed with PVC lipping. 25mm thick particle board Gable ends with edges
GM/DGM sealed with PVC lipping. 18mm thick particle board Modesty panel with edges sealed with PVC lipping. 0-
34 room Corner 20mm adjustable levelers. 20 8219.00 164380.00
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and Placing in position Conference table for 30 persons of overall size : 8950mm (W) x 2350mm
(D) x 740mm (H) and having One Head Module of size 2350mm x 850mm x 740mm and 12 Nos 2 Seater
Modules of size 1350mm x 710mm x 740mm . The worksurface shall be 36mm thick MDF board with one
side pre-laminated board conforming to IS:14587 and 0.4mm thick PVC membrane pressed on the top and
having chamfered edges. Full length access panel is provided with soft closing hinges inline with worktop
edge. The understructure and modesty consists of mixture of 18mm and 25mm thick pre-laminate twin board
of E1-P2 grade and conforming to IS: and 25mm thick pre-laminate twin board of E1-P2 grade and
conforming to IS: and 25mm thick pre-laminate twin board of E1-P2 grade and conforming to IS: 12823,
Main edge banded with 2mm thick pvc lipping. Aluminium alloy of grade 63400 WP is used for connecting panels
35 Conference together. An array of panels made of 0.8mm and 1.2 mm thick CRCA MS sheet as per IS:513, epoxy powder 1 518920.00 518920.00
table coated (DFT 40-60 microns) is used for flow of wires and cables. The table shall have provision to mount
AV/HDMI/VGA cables and shall come with cable retractors.Additional wire cover made of 0.8mm thick
CRCA MS sheet as per IS:513 shall be provided below the worktop to conceal microphone wires running
from table top to wire tray.Company Certification: Company is ISO-9001:2015,ISO-14001:2015,ISO-
45001:2018,Greenguard, BIFMA and AIOTA certified. Product Certificates: GRIHA, Greenguard (UL),
GreenPro, SCS Global IAQ - Gold.complete all as per the direction of Engineer-in-charge.
Providing and placing in position Conference table.. Worktop shall be made from 25mm thick MDF one
side prelaminate board with 0.4mm PVC membrane pressed on to top and having chamfered edge. Soft
closing dual access flap provided for access to power supply and data cables. The Under-structure consists
of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to
IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP
profile is added at bottom edges for improving the aesthetics.The product has a knock-down construction. A
wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for
Conference flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is
Table provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual
Cables(eg. HDMI,VGA-A,etc). The product must be UL Greenguard certified.Complete all as per the
direction of Engineer in Charge.
Providing and placing in position meeting table. Size 4200mmx 1500mmx 740mm. Worktop shall be made
from 25mm thick MDF one side prelaminate board with 0.4mm PVC membrane pressed on to top and
having chamfered edge. Soft closing dual access flap provided for access to power supply and data cables.
The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and
approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.
36A Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics.The 1 136510.00 136510.00
product has a knock-down construction. A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester
powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides
for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is
provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc). The product must be UL Greenguard
certified.Complete all as per the direction of Engineer in Charge.
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and placing in position meeting table. Size 3600mmx 1500mmx 740mm. Worktop shall be made
from 25mm thick MDF one side prelaminate board with 0.4mm PVC membrane pressed on to top and
having chamfered edge. Soft closing dual access flap provided for access to power supply and data cables.
The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and
approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.
36B Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics.The 1 126336.00 126336.00
product has a knock-down construction. A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester
powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides
for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is
provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc). The product must be UL Greenguard
certified.Complete all as per the direction of Engineer in Charge.
Providing and placing in position meeting table. Size 2400mmx 1500mmx 740mm. Worktop shall be made
from 25mm thick MDF one side prelaminate board with 0.4mm PVC membrane pressed on to top and
having chamfered edge. Soft closing dual access flap provided for access to power supply and data cables.
The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and
approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.
36C Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics.The 2 72070.00 144140.00
product has a knock-down construction. A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester
powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides
for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is
provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc). The product must be UL Greenguard
certified.Complete all as per the direction of Engineer in Charge.
Providing and Placing in position High Back Chair. The seat shall be made up of 1.2 +/- 0.1 cm thick hot
pressed plywood & upholstered with synthetic leather and moulded polyurethane foam. The dimensions of
seat should be 49.0cm(W) x 51.4(D) and that of back should be 51.8cm(W) x 75.2cm(H). High Resilience
(HR) polyurethane foam should be used in making seat & back which shall be moulded with density 45 +/- 2
kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression.The adjustable armrests are
designed with up-down adjustment in 8 steps(8.0+/-0.5 range). The height adjustable armrest structure is
chrome plated and fitted with PU moulded over metal insert fixed armrest top. The mechanism of the chair
shall have following features : 360⁰ revolving type, Single point control, Tilt tension adjustment, 4 position
Conference locking with antishock feature, seat back tilt ratio 1:2, front pivot for tilt with feet resting on ground ensuring
37 high back more comfort. The Back can be adjusted in 5 positions manually. Stroke of height adjustable spine is 7 cm. 5 22956.00 114780.00
chair The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm.
The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The
pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors).The twin wheel castors are injection
moulded in black PP. Seat can be slide horizontaly as per user convienience. Stroke of seat slide is 5 cm.
Overall dimensions of Chair shall be, Width of Chair - 67.5cm, Depth of Chair - 67.5cm as measured from
pedestal below. Height from ground - min 102.0 to max 119.0cm. Seat height - min 45.0 to max
55.0cm.Company Certification: Company is ISO-9001:2015,ISO-14001:2015,ISO-45001:2018,Greenguard,
BIFMA and AIOTA certified.complete all as per the direction of Engineer-in-charge.
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and placing in position mid back chair.The seat shall be made up of 1.2 +/- 0.1 cm thick hot
pressed plywood & upholstered with synthetic leather over moulded polyurethane foam. The dimensions of
seat should be 49.0cm(W) x 51.4(D) and that of back should be 51.6cm(W) x 65.7cm(H). High Resilience
(HR) polyurethane foam should be used in making seat & back which shall be moulded with density 45 +/- 2
kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression.The adjustable armrests are
designed with up-down adjustment in 8 steps(8.0+/-0.5 range). The height adjustable armrest structure is
chrome plated and fitted with PU moulded over metal insert fixed armrest top. The mechanism of the chair
shall have following features : 360⁰ revolving type, Single point control, Tilt tension adjustment, 4 position
Conference locking with antishock feature, seat back tilt ratio 1:2, front pivot for tilt with feet resting on ground ensuring
38 mid back more comfort. The Back can be adjusted in 5 positions manually. Stroke of height adjustable spine is 7 cm. 67 18723.00 1254441.00
chair The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm.
The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The
pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors).The twin wheel castors are injection
moulded in black PP. Seat can be slide horizontaly as per user convienience. Stroke of seat slide is 5 cm.
Overall dimensions of Chair shall be, Width of Chair - 67.5cm, Depth of Chair - 67.5cm as measured from
pedestal below. Height from ground - min 92.0 to max 110.0cm. Seat height - min 45.0 to max
55.0cm.Company Certification: Company is ISO-9001:2015,ISO-14001:2015,ISO-45001:2018,Greenguard,
BIFMA and AIOTA certified. complete all as per the direction of Engineer-in-charge.
Providing and placing in position visitor chair.The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed
plywood & upholstered with synthetic leather over moulded polyurethane foam. The dimensions of seat
should be 49.0cm(W) x 51.4(D) and that of back should be 51.6cm(W) x 65.7cm(H). High Resilience (HR)
polyurethane foam should be used in making seat & back which shall be moulded with density 45 +/- 2 kg/m
Conference ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The tubular frame is powder coated (
visitor chair DFT 40-60 microns ) cantilever structure & made of Dia.Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W.
Tube with a connecting M.S. Spine welded to it. Back spine is fitted to the frame assembly. Overall
dimensions of Chair shall be, Width of Chair - 57.5cm, Depth of Chair - 58.2cm as measured from pedestal
below. Height from ground - 110.8cm. Seat height - min 47.0 cm.complete all as per the direction of
Engineer-in-charge.
Providing and placing in position of main table of main table with overall size of table 1800 x 2100 x
750mm. The main table shall be of size 1800 x 900 x 750mm. The side unit shall be 1200 x 500 x 750mm.
The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4
mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work
surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board
confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of
25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane
pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and
40 PA table approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick 1 102104.00 102104.00
Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC
lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane
pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long
metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam
mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for
security.complete all as per the direction of Engineer-in-charge.
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and placing in position of main table of main table with overall size of table 1650 x 1950 x
750mm. The main table shall be of size 1650 x 750 x 750mm. The side unit shall be 1200 x 500 x 750mm.
The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4
mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work
surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board
confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of
25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane
PA/Staff pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and
41 approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick 13 76973.00 1000649.00
Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC
lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane
pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long
metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam
mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for
security.complete all as per the direction of Engineer-in-charge.
Providing and placing in position high back chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed
plywood. The back is made up of injection moulded glass filled nylon & upholstered using net fabric with high
tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density =55+/-2
kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down
adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of
thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with textured top. It shall
have Front pivot synchro mechanism with following features. 360 degree revolving type, Single point control,
PA/Staff front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2.
42 High back The lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester 13 14679.00 190827.00
chair fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of
the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the
work shall be carried out as per guidance and instructions recieved from Engineer Incharge. This shall come
along a headrest from same family. It shall be SCS IAQ certified for Indoor Air Quality.Complete all as per
the direction of Engineer in Charge.
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and placing in position mid back chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed
plywood. The back is made up of injection moulded glass filled nylon & upholstered using net fabric with high
tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density =55+/-2
kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down
adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of
thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with textured top. It shall
have Front pivot synchro mechanism with following features. 360 degree revolving type, Single point control,
PA/Staff Mid front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2.
back chair The lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester
fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of
the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the
work shall be carried out as per guidance and instructions recieved from Engineer Incharge. It shall be SCS
IAQ certified for Indoor Air Quality.Complete all as per the direction of Engineer in Charge.
Providing and placing in position panel & tile based modular workstation, with partition thickness as
52.4 mm thk and ht - 1200 including powder coated aluminium trims. Tiles: The tiles on the top most
frame shall be glass writing board/ clear glass tile. Bottom tiles - Plain metal/ fabric magnetic / fabric /
laminated /prelam. The panel thickness comprises of 38mm (35 mm Minimum) thick paper honeycomb +
3mm MDF on each sides + 0.6mm decorative laminate or fabric on both sides. The uprights and horizontals
shall be made of aluminium extrusion having average wall thickness of 1.2 mm & powder coated with
epoxy- polyester powder. Particle board framing is used on outer boundary of these blocks as well as
intermediately at certain locations forming conduit for passing cables. These blocks are located in
44 the mid segment of the panels and can be provided with cutouts for mounting switch boxes (above or below 112 87001.00 9744112.00
the worktops). Top tiles can be offered in variety of combinations. The fins along the depth shall be 22.8mm
thick. Worksurface- out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size
1500mm W1 x 1500mm W2 x 600D x 750H. Brackets shall be made from 2mm thick CRCA steel.
Pedestals with legs - Nova pedestal flat metal front, free standing central locking of size 390 mm w x 435
mm d x 646 mm height 3dr = 2box+1file. The work shall be carried out as per the instructions and
guidance received from engineer incharge. The product must be UL Greenguard, BIFMA Level 3
certified.Complete all as per the direction of Engineer in Charge.
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and placing in position Workstation chair.The cushioned seat and back assembly consists of seat
base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high stretch
knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam used in
seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the
base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just
with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat
offers impact cushioning while seating and synchronises with the back movement during posture changes.
The ‘S: shaped spines moulded in high strength glass filled Polyamide and the spine connector moulded in
Workstation glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The
1 Chair variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is inbuilt in saet
base and the tension is user weight dependent. The adjustable armrests assembly consists of armrest
housing sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic height
adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and
fitted with 5 nos. twin wheel castors. The pedestal is 66cm pitch centre diameter and 76cm with castors. The
overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm). The seat height shall be (44.5-
53.8cm).Complete all as per the direction of Engineer in Charge.
Providing and placing in position panel & tile based modular workstation, with partition thickness as
52.4 mm thk and ht - 1200 including powder coated aluminium trims. Tiles: The tiles on the top most
frame shall be glass writing board/ clear glass tile. Bottom tiles - Plain metal/ fabric magnetic / fabric /
laminated /prelam. The panel thickness comprises of 38mm (35 mm Minimum) thick paper honeycomb +
3mm MDF on each sides + 0.6mm decorative laminate or fabric on both sides. The uprights and horizontals
shall be made of aluminium extrusion having average wall thickness of 1.2 mm & powder coated with
epoxy- polyester powder. Particle board framing is used on outer boundary of these blocks as well as
Workstation intermediately at certain locations forming conduit for passing cables. These blocks are located in
2 the mid segment of the panels and can be provided with cutouts for mounting switch boxes (above or below
the worktops). Top tiles can be offered in variety of combinations. The fins along the depth shall be 22.8mm
thick. Worksurface- out of 25 mm thk prelam particle board with flat pvc lipping edge banding . Brackets
shall be made from 2mm thick CRCA steel. Pedestals with legs - Nova pedestal flat metal front, free
standing central locking of size 390 mm w x 435 mm d x 646 mm height 3dr = 2box+1file. The work shall be
carried out as per the instructions and guidance received from engineer incharge. The product
must be UL Greenguard, BIFMA Level 3 certified.Complete all as per the direction of Engineer in Charge.
T-Shape Cluster of 2 Module Overall sizes of the workstation is - 3000mm(L) X 3000mm(W) X 1240mm(H)
46A A with Table of size 1500mm(L) X 750mm(D) X 750mm(H), Side Table 900mm(L) X 450mm(D) X 750mm(H) 3 298457.00 895371.00
T-Shaped Cluster of 1 Module Overall sizes of the workstation is - 3000mm(L) X 1500mm(W) X
46B B 1240mm(H) with Table of size 1500mm(L) X 750mm(D) X 750mm(H), Side Table 900mm(L) X 450mm(D) X 6 159928.00 959568.00
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and placing in position High back chair. The SEAT/BACK ASSEMBLY: The seat is made up of
1.2 + 0 1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18.The
Back is made up of injection mould d glass filled nylon & upholstered using Quitted Leatherette fabric *
SEAT SIZE(Larger Seat Depth) : 47.0 cm (W) x 51 5 cm (D) * SEAT SIZE(Standard Seat Depth) : 47.0 cm
(W) x 49.5 cm. (D)* BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H).HIGH RESILIENCE (HR) POLYURETHANE
FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 + 2 kgf as
per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following
features • Up-Down adjustment— 8 steps (8.0+0.Scm range)• Height adjustable armrest structure which is
Chrome plated & fitted with an armrest top. Fixed Armrest Top is PU moulded over metal insert. LUMBAR
SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane
foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting
knobs provided on the rear side of the pad. Lumbar pad has an adjustment of 8.0 + 0.5 cm in height FRONT
PIVOT SYNCHRO MECHANISM: The adjusta ble tilting mechanism is designed with the following features.•
360° revolving type.• Single point control. • Front-pivot for tilt with feet resting on ground ensuring more
Workstation comfort. • Tilt tension adjustment • 4-position locking with anti-shocK feature. • Seat/back tilting ratio of 1.2
47 2 High back NECXREST : The Neckrest assembly consist of polypropylene pad with moulded polyurethane foam & 12 18422.00 221064.00
chair covered with Polyester fabric. Neckrest is fixed to Back Assembly through Neckrest connector. Neckrest
assembly has Weight adjustment of 4.2 + 0.5 cm and rotation adjustment of oyerat! 76°+- 2°. The complete
neckrest assembly is retro fit to the main chair. Pneumatic Height Adjustment : The pneumatic height
adjustment has adjustment stroke of 10.0+-0.3 PEDESTAL ASSEMBLY : The pedestal is fabricated from
0.2 + 0.02 cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub
cap and 5 nos. twin wheel castors. The pedesta! is 66.0+0 Scm. Pitch-center dia. (76.0+1.0 cm with
castors). COAT HANGER : The Coat Hanger is made up of injection moulded glass filled nylon. The Coat
hanger is retro fit and is fixed to the back assembly. TWIN WHEEL CASTORS: The twin wheel castors are
injection moulded in black Nylon. NECXREST : The Neckrest assembly consist of polypropylene pad with
moulded polyurethane foam & covered with Polyester fabric. Neckrest is fixed to Back Assembly through
Neckrest connector. Neckrest assembly has Weight adjustment of 4.2 + 0.5 cm and rotation adjustment of
oyerat! 76°+- 2°. The complete neckrest assembly is retro fit to the main chair.Complete all as per the
direction of Engineer in Charge.
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and placing in position revolving visitor. The SEAT/BACK ASSEMBLY: The seat is made up of
1.2 + 0 1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18.The
Back is made up of injection mould d glass filled nylon & upholstered using Quitted Leatherette fabric *
SEAT SIZE(Larger Seat Depth) : 47.0 cm (W) x 51 5 cm (D) * SEAT SIZE(Standard Seat Depth) : 47.0 cm
(W) x 49.5 cm. (D)* BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H).HIGH RESILIENCE (HR) POLYURETHANE
FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 + 2 kgf as
per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following
features • Up-Down adjustment— 8 steps (8.0+0.Scm range)• Height adjustable armrest structure which is
Chrome plated & fitted with an armrest top. Fixed Armrest Top is PU moulded over metal insert. LUMBAR
SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane
foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting
knobs provided on the rear side of the pad. Lumbar pad has an adjustment of 8.0 + 0.5 cm in height FRONT
PIVOT SYNCHRO MECHANISM: The adjusta ble tilting mechanism is designed with the following features.•
360° revolving type.• Single point control. • Front-pivot for tilt with feet resting on ground ensuring more
comfort. • Tilt tension adjustment • 4-position locking with anti-shocK feature. • Seat/back tilting ratio of 1.2
NECXREST : The Neckrest assembly consist of polypropylene pad with moulded polyurethane foam &
covered with Polyester fabric. PEDESTAL ASSEMBLY : The pedestal is fabricated from 0.2 + 0.02 cm thick
HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos.
twin wheel castors. The pedesta! is 66.0+0 Scm. Pitch-center dia. (76.0+1.0 cm with castors). COAT
HANGER : The Coat Hanger is made up of injection moulded glass filled nylon. The Coat hanger is retro fit
and is fixed to the back assembly. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded
in black Nylon. NECXREST : The Neckrest assembly consist of polypropylene pad with moulded
polyurethane foam & covered with Polyester fabric. Neckrest is fixed to Back Assembly through Neckrest
connector. Neckrest assembly has Weight adjustment of 4.2 + 0.5 cm and rotation adjustment of oyerat!
76°+- 2°. The complete neckrest assembly is retro fit to the main chair.Complete all as per the direction of
Engineer in Charge.
Providing and placing in position discussion table.The overall size of the wortop shall be 1000mm dia. x
740mm. Worktop shall be made from 25mm thick MDF one side prelaminate board with 0.4mm PVC
membrane pressed on to top and having chamfered edge. Soft closing dual access flap provided for access
to power supply and data cables. Made of 25mm thick MDF-one side pre-laminate board with 0.4mm PVC
membrane pressed on to top. Gromet provided for wire management. The Under-structure consists of an
Inner Tube Assembly with Top for Worktop Mounting and Base plate with levellers. The Top Plate is made of
5mm thk hot rolled steel Plates (HR) (As per IS: 2062) & the bottom plate is made of 8mm thk hot rolled
steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 25.4mmx 25.4mm x 1.2mm thk
round electric resistant welded tube (ERW)(As per IS:7138) welded together using Tungsten inert gas
welding. The whole structure is epoxy polyester powder coated (DFT 40-60 microns). The product has a
knock-down construction.Complete all as per the direction of Engineer in Charge.
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing and placing in position Discussion chair.The cushioned seat and back assembly consists of seat
base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high stretch
knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam used in
seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the
base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just
with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat
offers impact cushioning while seating and synchronises with the back movement during posture changes.
Library The ‘S: shaped spines moulded in high strength glass filled Polyamide and the spine connector moulded in
50 discussion glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The 8 14302.00 114416.00
chair variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is inbuilt in saet
base and the tension is user weight dependent. The adjustable armrests assembly consists of armrest
housing sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic height
adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and
fitted with 5 nos. twin wheel castors. The pedestal is 66cm pitch centre diameter and 76cm with castors. The
overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm). The seat height shall be (44.5-
53.8cm).Complete all as per the direction of Engineer in Charge.
Providing and placing in position of Three Seater modern appearance crafted of premium wood in a
pleasing tone and matte finish. This sofa is beautifully created to fit in with any decor and was created to
balance utility and design. Upholstery made of the finest cotton fabric further improves the sofa's
aesthetics.196 cm x 76 cm x 82 cm.Coffee Saar 3 Seater Sofa
Providing and placing in position of Two Seater modern appearance crafted of premium wood in a pleasing
tone and matte finish. This sofa is beautifully created to fit in with any decor and was created to balance
utility and design. Upholstery made of the finest cotton fabric further improves the sofa's aesthetics.196 cm x
76 cm x 82 cm.Coffee Saar 2 Seater Sofa
Providing and placing in position of Single Seater modern appearance crafted of premium wood in a
pleasing tone and matte finish. This sofa is beautifully created to fit in with any decor and was created to
balance utility and design. Upholstery made of the finest cotton fabric further improves the sofa's
Lounge/ aestheticsCoffee Saar 1 Seater Sofa
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade
for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as
Lounge/Rece per IS:1762. overall dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1
54 ption Center cm. 2 12279.00 24558.00
Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade
for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as
Lounge/Rece per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.
Providing & placing in position Double Sided Wood & Steel Book Rack.Body:Side panels, Frame & Cross L
bracket are made using 0.8 mm CRCA (IS:513).The assembly consists of 2 tie rods, 4 fixing brackets and 2
turnbuckles in each body. The tie rods are fixed in a shape of ‘X’ The tie rods are made of 4mm diameter
rods of MS while fixing brackets are made of 2mm thick. CRCA IS:513 Grade.wooden panel of 25mm thk
PLT, E1-P2 grade board for PLT ref. Specification -FF04/DSN/STD/101, edges shall be provided with
machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.The Under Structure is made of
Double sided 0.8m CRCA (IS:513). Shelves used are 10 bend panel made of 0.8mm CRCA (IS:513). Shelf panels are
wooden & placed on shelf support and then fixed using nut and bolts from below. Standard config. consists of 6 loading
steel book levels formed by 5 no of adjusted shelf for each main and add on unit. Uniformly Distributed Load Capacity
rack per each shelf is 80 Kg maximum.Completely Knock down construction.All MS sheetmetal and metal frame
components are powder coated with epoxy polyester powder to the min thickness of min 45 microns.At the
rear side of the shelves back stiffeners are provided.These act as separators between front & rear books
made of 0.8mm THK CRCA (IS:513).Lable Holder: It is an aluminum extrusion of length 596mm for double
body bookrack ,fitted on to front of body. The Paper is 300GSM matt finish, to be inserted into the aluminum
extrusion. The length of paper is 596mm for double body bookrack. Complete all as per the direction of
Engineer in Charge
Digitally signed by AMIT
SINGH 20:48:33 IST
S No Item Item Description Qty Unit Rate Amount Reference Image
Providing & placing in position of Single Sided Wood & Steel Book Rack .Side panels, Frame & Cross L
bracket are made using 0.8 mm CRCA (IS:513). The assembly consists of 2 tie rods, 4 fixing brackets and 2
turnbuckles. The tie rods are fixed in a shape of ‘X’ The tie rods are made of 4mm diameter rods of MS while
fixing brackets are made of 2mm thick. CRCA IS:513 Grade. wooden panel of 25mm thk PLT, E1-P2 grade
board for PLT ref. Specification - FF04/DSN/STD/101, edges shall be provided with machine pressed 2 mm
thick PVC lipping glued with hot melt EVA glue.Under structure is made of 0.8m CRCA (IS:513).Shelves
Singel sided used are 10 bend panel made of 0.8mm CRCA (IS:513). Shelf panels are placed on shelf support and then
wooden and fixed using nut and bolts from below. Standard config. consists of 6 loading levels formed by 5 no of
steel book adjusted shelf for each main and add on unit. Uniformly Distributed Load Capacity per each shelf is 80 Kg
rack maximum. Completely Knock down construction.All MS sheetmetal and metal frame components are
powder coated with epoxy polyester powder to the min thickness of min 45 microns.At the rear side of the
shelves back stiffeners are provided. These act as separators made of 0.8mm THK CRCA (IS:513).Label
Holder: It is an aluminum extrusion of length 296mm for single body bookrack ,fitted on to front of body. The
Paper is 300GSM matt finish, to be inserted into the aluminum extrusion. The length of paper is 296mm for
single body bookrack. Complete all as per the direction of Engineer in Charge.
Compactor-Overall size2047H x 1200W x 800D. Designed for long life and easy part replacement. Uses one
common aisle spacethat optimizes available space. PU drive wheel for firm grip and hassle-free mobility.
Channel stoppers prevent derailment. Label holders with neat transparent acrylic sheets facilitate easy
identification. Locking stiffeners for centralised locking ensures safety of documents. Rotating locks with
58 easy to identify lock/unlock positions ensures safety. Shims providedbelow the rails for right 96 41481.00 3982176.00
laveling.Complete all as per the direction of Engineer-in-charge.
Aesthetically appealing completely knock down construction.The add—on units are stack widthwise to form
a row of storage having a common side panel. (Note— Single Main unit should not be offered.Minimum 1
Main + IAddon to be offered)Legs fitted with screw type leveler(add 45mm to the height)Made from
combination of CRCA** 0.5 mm & 0.8mm Thickness.CRCA 'D' Grade as per IS-513.Heightwiae Adjustable
Storage Shelf Mounting.Each Full shelf has Load Capacity of 40Kg Epoxy Polyester Powder coated to the thickness
GAIN of 50 microns (+/—10 micron).Complete all as per the direction of Engineer in Charge.
Providing and placing in position hinged door unit (HDU) of size 1200mm (H) X 900mm (W) x 460mm(D).
The top is 11mm thick bent metal made out of 0.8mm CRCA steel sheet (as per IS:513) powder coated with
DFT 40-60 microns of epoxy polyester powder. The body and side panel are made of 25mm thick and
18mm thick PLT board respectively with metal cladding of 0.8mm CRCA steel sheet (as per IS:513) from the
outside powder coated with DFT 40-60 microns of epoxy polyester powder. 1 No Adjustable and 1 No Fixed
60 Storage HDU Shelf made of 25mm thick PLT is provided with a UDL capacity of 40kg maximum. The doors are made of 25 21529.00 538225.00
18mm thick PLT with a 3-way nickel plated wooden furniture lock and aesthetically appealing recessed
aluminum extrusion handles. Screw adjustable levellers with plastic base are provided at the bottom for
vertical ht. adjustment for floor levelling of units. Complete all as per the direction of Engineer-in-charge.
Complete all as per the direction of Engineer in Charge.
Digitally signed by AMIT
SINGH 20:48:33 IST
Schedule of Quantities: Signages
S No Description Unit Qty Unit price Non-DSR Amount
1 RECEPTION 3D ACRYLIC SIGNAGE
Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 inches of
required size and shape with arrangement of screws in the letters itself for
mounting on the walls or pasting using 3M VHP Tape. Fixing complete as per
directions of the engineer. The Sizes would be calculated in Sqft as per Logo Each 4 35,977.00 143908.00
Design provided.
Tentative Size 42"X60"
2 NAME SIGNAGE CHANGEABLE (All Floors)
Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood
finish pasted /White milky acrylic 3mm laser cut pasted on top with proper
names/ Departments written using plottercut vinyl or laser cut acrylic letters in
approved colour.Inserting provision for changing names .Fixing provision using Each 70 1,967.00 137690.00
3M VHP double sided tape as required.
Signage Size 12x5 inch
3 DEPARTMENTAL SIGNAGE (All Floors)
Providing and fixing of Acrylic signage made of 5mm Acrylic with textured wood
finish pasted /White milky acrylic 3mm laser cut pasted on top with proper names
/Departments written using plottercut vinyl or laser cut acrylic letters in approved Each 10 1,439.00 14390.00
colour. Fixing provision using 3M VHP double sided tape as required.
Signage Size 12x5 inch
4 FLOOR DIRECTORY
Providing and fixing of Acrylic signageboard of 5mm Acrylic with textured wood
finish pasted /White milky acrylic 3mm laser cut pasted on top with proper names
/Departments written using plottercut vinyl or laser cut acrylic letters in approved
colour. Provision of fixing screws/ Studs etc or as per the direction of the Each 2 20,147.00 40294.00
5 TOILET ICONS
Providing and fixing of Acrylic signage made of 5mm Acrylic with textured wood
finish pasted /White milky acrylic 3mm laser cut pasted on top with proper icons
using plottercut vinyl or laser cut acrylic letter in approved colour. Fixing provision Each 24 1,165.00 27960.00
using 3M VHP double sided tape as required.
Signage Size :8 "x 8" inch
6 FIRE EVACUATION MAP / SIGN.
Digitally signed by AMIT
SINGH 20:48:33 IST
Providing and fixing of Clear Acrylic sandwich frame of 3mm & 2mm acrylic with
Evacuation Plan Printed on photoluminescent media and inserted between the
two frames. Should be fixed on the wall using 4 Screw/ SS studs. Size 12 inch x Each 4 2,673.00 10692.00
7 FIRE ESCAPE EDGE-LIT SIGNAGE
Providing and fixing of Edge-Lit signage with battery backup. Made from acrylic
sheet of 8 mm thickness laser engraved, Transformer to be inbuilt. Maintenance -
free sealed nickel cadmium battery included • 120V/277V AC Operation • Crystal
clear acrylic face panel• Engraved letters increase visibility • Anodized aluminum Each 4 3,289.00 13156.00
faceplate • Field applied chevron directional indicators simplify installation •
Long life, energy-saving LED lamps • Dual-voltage 120V/277V AC Operation •
UL listed. To be installed at stairs entry. Size 310mm x 175mm
8 FIRE SAFETY SIGNAGE
Providing fabricating and fixing of signage 05 mm thick Acrylic / Sun board sheet
at base with photoluminescent film self adhesive & colored vinyl ( Red/Green)
Plotter cut and pasted on top. Both side / Single Side facing Complete including
fixing on wall with screws and washers or hanging on ceiling with GI chain/GI Bar
complete as per technical specifications and directions of Engineer.
a Photoluminescent, Fire Hose Reel - 10"x8" Each 6 535.00 3210.00
b Photoluminescent, Fire Exit / Escape Sign - 18"x6" Each 6 617.00 3702.00
c Photoluminescent, Floor Level - 18"x6" Each 6 617.00 3702.00
d Photoluminescent, Fire Alarm Call Point - 10"x8" Each 6 535.00 3210.00
e Photoluminescent, Fire do not use lift- 10"x8" Each 6 535.00 3210.00
f Photoluminescent Signs, Fire Extinguishers - 10"x8" Each 12 535.00 6420.00
TOTAL 411544.00
Digitally signed by AMIT
SINGH 20:48:33 IST
SCHEDULE OF QUANTITIES: HORTICULTURE
S NO DESCRIPTION Total Qty Unit Ref. Images Rate Total Price
Rectangular FRP Planter(LP7A-
4 Round FRP Planter(LP9A-20"X20"X30") 25 Pcs. 3,000.00 75,000.00
5 Round FRP Planter (LP9B-18"X18"X24") 25 Pcs. 2,860.00 71,500.00
Digitally signed by AMIT
6 Artificial Vertical Garden on wall 50 Sq.ft. 303.00 15,150.00
Ms Frame (Hanging) with Artificial hanging
Size : 3'-0"x6'-0" (Each)
Plantation: Supply and installaion of Natural
Plant with sand, fertilizer etc.
Plantataion / Labour / Loading unloading,
9.2 repaire and replacement if required. LS 1,50,000.00
NET TOTAL 7,37,505.00
Digitally signed by AMIT
Schedule of Quantities: Pantry Equipments
S No Description Unit Qty Unit price DSR Amount Non-DSR Amount
Supplying 335 L Double Door Refrigerator with Smart Inverter Compressor with
following features:
Smart Inverter Compressor
1 Smart Diagnosis™ Each 2 36,350.00 72700.00
Auto Smart Connect™
Supplying 28 Litres Convection Microwave with Glass Door, 251 Auto Cook
Menu, 360° Motorised Rotisserie with following features:
251 Auto Cook Menu
Intellowave Technology
Cooking Completion Alarm
Supplying Induction Cooker with Extra Safe Automatic Off Function, 2100Watts,
Temperature Control, 6 Preset Menus with following features:
Temperature Control
SuuplyingCooker with Chimney
MS Nero High Power
with Filterless Technology, Hand Auto Clean
Technology, LED Lamps, Motion Sensor, Oil Collector, Curved Glass (Black)
with following features:
1200 m3/hr Suction
4 Filterless Filter Each 2 14,140.00 28280.00
Heat Auto Clean Technology
Maximum Suction Capacity
Touch Control Panel
Striking Design
Supplying Beverage Vending Machine (Multicolor) with following features:
Fully Automatic
Just press of a button
5 Cup Counter/Hot Water Each 2 23,955.00 47910.00
Aesthetic Design
Micro Processor
Digitally signed by AMIT
SINGH 20:48:33 IST
Supplying Digital Air Fryer HD9252/90 with Touch Panel, uses up to 90% less
fat, Air Fry, Roast, Bake, Grill, Reheat 7 Pre-set Menu, 1400W, with dishwasher
safe 4.1 Liter basket, Patented Rapid Air Technology, Starfish design, 360 °even
6 frying, Black Each 2 12,042.00 24084.00
Supplying Electric Deep Fryer 6 + 6 Ltr Best for french fries deep fryiing.
7 MaterialStainless Steel,Coloursilver,Item Weight1950 Each 2 9,608.00 19216.00
Grams,Wattage2500 Watts,Oil Capacity 12.00
TOTAL 214229.00
Digitally signed by AMIT
SINGH 20:48:33 IST
SCHEDULE OF QUANTITIES - GAS SUPRESSION SYSTEM
MR S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT
MR S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT
DSR (INR) NON-DSR (INR)
Gas Suppression System
SITC of 67.5 Ltrs. Cylinder with Valve & Warning Sign Boards (42 Bar VDS / UL
Approved System)
M.R. 5 SITC of Master Cylinder Accessories: (Single Cylinder)
M.R. * Pr. Guage + Low Pr. Supervisory Switch
M.R. * Electromagnetic Actuator
M.R. * Pneumatic Actuator
M.R. * Flexible Discharge Hose
M.R. * Flexible Actuation Hose
M.R. * Manual Pneumatic Actuator
M.R. * Union 7/16 JIC 1/8
M.R. 6 SITC of Nozzles Nos. 12 7,689.00 92,268.00
M.R. 7 SITC of MS SCH 40 Seamless Pipes Lot 4 76,889.00 3,07,556.00
M.R. 8 SITC of 2 Zone Fire Alarm Cum Gas Release Module with 7AH x 2 Batteries No.s 4 31,455.00 1,25,820.00
SITC of UL Listed FM Approved Listed Conventional Smoke Detectors with Base with 3
LED Color Indication
M.R. 10 SITC of Response Indicators Nos 8 105.00 840.00
M.R. 11 SITC of Abort Switch No.s 4 2,516.00 10,064.00
M.R. 12 SITC of Release Switch No.s 4 2,516.00 10,064.00
M.R. 13 SITC of Hooter with Strobe No.s 4 2,516.00 10,064.00
M.R. 14 SITC of 2 Core 1.5 Sqmm Armoured Cable Mtrs 800 133.00 1,06,400.00
Digitally signed by AMIT
SINGH 20:48:33 IST
aoc.pdf
Download all tender documents and submit your bid