PERIODICAL SERVICE AND MISC REPAIRS IN ZONE I II AND ZONE VI OF VARIOUS UNIT AT LEKHAPANI UNDER GE DINJAN NO 2

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water & removal of debris off the premises etc. complete all as specified & directed.

M&L for rendering 15mm thick in CM 1:4 in brick/concrete surfaces up to 8 Mtr height of building, finished even and smooth without using extra cement with and including using liquid WPC @ 200ml per 50 kg of cement all as specified and directed (WPC shall be measured and paid separately)

Supply only integral water proofing compound, complete all as specified.

Complete removal of existing treatment on wall/ roof projections incl facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust loose paint etc by skilled labour complete all as specified and as directed

M & L for waterproof cement based putty @ 1 Kg (undiluted) per sq mtr of average thickness 1mm over the newly plastered surfaces to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanicsm) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per following steps : - Step 1 : Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 Kg putty per minute. Step 2 : Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a max pressure 3300 PSI Step 3 : Allow 6-8 hrs time to dry the putty surface Note : (a) The work pertaining to periodical services and water proofing shall be executed as per manufacturer instructions i.e. Paint, Distemper, Putty etc is proposed to be used by the contractor and approved by Engr-in-Charge. (b) Cost of Scafolding upto 10 mtr height of building is included in this item. (c) Masking of waindow/doors during spray painting using polythine film will be included (d) Cleaning and clearing site of paint, mats etc included.

M & L for one coat of acrylic water based exterior grade primer @ 0.9 ltr (undiluted/10 sqmtrs diluted with water 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Note : (a) The work pertaining to periodical services and water proofing shall be executed as per manufacturer instructions i.e. Paint, Distemper, Putty etc is proposed to be used by the contractor and approved by Engr-in-Charge. (b) Cost of Scafolding upto 10 mtr height of building is included in this item. (c) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 years.

M & L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive and color stay Techonology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifieecations, Anti Algal properties in two coats @ 1.79 ltr (Undiluted)/10 Sqm with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow spreed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface in both coats of paint complete all as specified and directed. Note : (a) The work pertaining to periodical services and water proofing shall be executed as per manufacturer instructions i.e. Paint, Distemper, Putty etc is proposed to be used by the contractor and approved by Engr-in-Charge. (b) Cost of Scafolding upto 10 mtr height of building is included in this item.

M&L for rendering 15.mm thick plaster in cm 1:6 on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified & directed.

M&L for rendering 15mm thick in CM 1:4 and finished fair and even without using extra cementall as specified and directed

Material and labour for preparation of new / untrreated plastered surfaces of walls by washing, rubbing down and stopping of existing finishes and painting the surface by applying two coats of acrylic distemper over a coat of primer complete of any tint/shade including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed..

Material and labour for preparation of new / untrreated plastered surfaces of walls by washing, rubbing down and stopping of existing finishes and painting the surface by applying two coats of cement base paint over a coat of primer complete of any tint/shade including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed..

M&L for complete removal of existing treatment on wall etc and applying two coats of acrylic based distemper emulsion of any shade/tint over and including a coat of 1 mm thick wall care putty including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls etc and applying one coats of acrylic based distemper emulsion of any shade/tint including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of walls , chajja, facia & roof projection including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of ceiling including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls etc and applying one coats of cement base paints of any shade/tint including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

Material and labour for preparation of old painted wooden /wood based materials surfaces of any description, not otherwise described, over 10 cm width or girth and painting with one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all dropings etc. all as specified and as directed

Material and labour for preparation of old painted steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and painting with one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all drops etc. complete all as speciified and as directed.

M&L for complete removal of existing treatment on wall etc and applying two coats of acrylic based distemper emulsion of any shade/tint over and including a coat of 1 mm thick wall care putty including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

Dismantling boarding, any description fixed in any position with nails complete all as specified & directed

M&L for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description), from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fixing 2.5mm to 3mm thick PVC transparent/frosted window panes ordinary quality and glazing with oil putty / wooden beads as required in squares n exc 0.5sq. m in each pane complete all as specified and as directed

RIA CONSTRUCTION (BID ID -3330163)