Karnataka

Active

Works

Roads

Annual Maintenance of Sri Rangapatna to Malai Mahadheshwara Betta Road (S.H.79) road from ch.14.40 to 22.80 km, 24.20 to 40.63 km & 41.30 to 59.59 km in T. Narasipura Taluk

Public Works Department

PWD Division Office Mysuru | Mysuru, Karnataka

Amount: ₹27.8 LCloses: 28 Aug 2026Due today

Timeline

Published21 Aug 2026
Closes28 Aug 2026
Bid Opening29 Aug 2026

Tender Value

₹27.8 L

EMD Value

₹55,590

Closing Date

28 Aug 2026, 10:30 pmDue today

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Padmanabha HR

Office Number

08212402810

Work Description

Annual Maintenance of Sri Rangapatna to Malai Mahadheshwara Betta Road (S.H.79) road from ch.14.40 to 22.80 km, 24.20 to 40.63 km & 41.30 to 59.59 km in T. Narasipura Taluk

Tender Information

Tender ID

PWD/2026-27/RD/WORK_INDENT40314

Reference Number

PWD/2026-27/RD/WORK_INDENT40314

Tender Type

Open

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Mysuru

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredAnnual Turnover Certificate with UDIN from CA and Profit & loss statements

RequiredPWD Registration Certificate CLASS III and above

RequiredWork Done Certificate for Similar nature work, duly attested by the Officer Not below the rank of E.E. in the last five years i.e. 2021-22, 2022-23, 2023-24 , 2024-25 & 2025-26

RequiredExisting commitments and on-going works to be completed during the next 12 Months

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPP Portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees.

Conditional tenders will not be accepted

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The Tender processing fee shall not be refundable.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

The successful Tenderer shall deliver to the Employer a Security deposit in the form of NSC/DD/FDR in the name of the Executive Engineer, Public works Department, Mysore Division, Mysore given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract.

Contractor should carryout additional test required to test the suitability of materials.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Formation levels and other data furnished are bare minimum the contractor should make all efforts to validate and to get additional data if required at his own cost.

Materials like steel, cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

The contractors assessed available tender capacity will be calculated as per the clause 3.3 of STD tender document Attached.

All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work.

All precautions should be taken by the contractor so that there are no damages to such public/ private properties.

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

Contractor should follow strictly the prevailing rules of labour act.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, Public works Department, Mysore Division, Mysore during office hours on all working days.

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-2

The employer reserves the rights to Cancel or Withdraw any or all the tenders without Giving any reasons & Any Time.

Estimate rates are Exclusive of 18% GST,Hence GST will be paid separately for the quoted rates accordingly.

Contractors should be registered as KPWD Class III & above Civil Contractor

The contractor will get payments based on the Schedule B only , except that no payment will be made by the Public Works Department.

3.2(a)Achieved in at least TWO financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.27.79 Lakhs (Usually not less than the estimated annual payments under this contract for works costing upto Rs.100.00 Lakhs)

3.2(b)Mandating Satisfactory completion as a prime contractor, at least One similar nature of work to an extent of 50% of the cost of the work value not less than Rs. 13.89 Lakhs in last 5 years i.e 2021-22 to 2025-26

The contractors assessed available tender capacity will be calculated as Assessed available tender capacity AxNx2.5-B ) Where, A -Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress taking into account the completed as well as ongoing works. N-Number of years prescribed for completion of the works for which tenders are invited.B-value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 12 months.

Regarding Appealing aggrieved contractors may appeal to the prescribed (Appellant) authority within 15 days as per KTTP and appeal should be through KPP-PORTAL only

The Intended Completion Date for the whole of the Work is 12 months (comprising 03 (three) months for execution of the works and 9 (nine) months for the Maintenance of Work)

Technical Criteria

Capabilities of Vendor

PWD Registration Certificate Class III and above

Others -- PWD Registration Certificate Class III and above

Work Done Certificate

Financial Status

Reports on the financial standing of the tenderer,such as profit and loss statements and auditor reports for the last five years(2021-22 TO 2025-26)

Audited CA Certificate of Annual Turnover

List of existing commitments and ongoing work

Work Done Certificate

List of works for which tenders already submitted

Others -- List of works for which tenders already submitted

3.2 (a)Achieved in at least TWO financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.27.79 Lakhs (Usually not less than the estimated annual payments under this contract for works costing upto Rs.100.00 Lakhs)

Work Done Certificate

Work Locations

Fee & Financial Details

Tender Fee Amount

₹700

EMD Fee Amount

₹55,590

Important Dates

Last Activity

21 Aug 2026

Published

21 Aug 2026

Bid Opening

29 Aug 2026

Download Ends

27 Aug 2026

BOQ Preview

•

Annual Maintenance of Sri Rangapatna to Malai Mahadheshwara Betta Road (S.H.79) road from ch.14.40 to 22.80 km, 24.20 to 40.63 km & 41.30 to 59.59 km in T. Narasipura Taluk

•

Clearing & grubbing road land including vegetation, bushes, shrubs, saplings by using weed cutter / minor equipment. ---- Including cost of all materials, with all lead lift and labour charges,...

•

Patching of Potholes - Patching of Shallow Potholes using SDBC Gr II 25 mm thick - Patching of shallow potholes on asphalt surfaces by using Semi Dense Bituminous Concrete 25mm thickness. The ...

•

Maintenance of Earthen Shoulder (filling with fresh soil) - Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with app...

•

Replacement of Metal Beam Crash Barrier - Type - A, W : Metal Beam Crash Barrier - Replacement of W metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, ...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...

•

Tack coat on Bituminous surface - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface clean...

•

Bituminous Concrete Grading II for traffic <20 MSA - Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, pre...

•

Pedestrian Crossings as per IRC 99-2018 - Providing Speed Breakers/Raised pedestrian crossings in Trapezoidal section with 2.5 m Top width and transition length of 0.8 m length and height of...

•

Patching of Deep Potholes 75mm thick by restoring the granular base course using materila confirming to WBM Grade-2 with B type screenings standards wherever necessary by manual means including trimmi...

•

ELECTRICAL POLE SHIFTING

•

Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL (Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS-13158: 1991 (3/7 1.07 ) ---- Including cost of all materials, with all lead lift and labour...

•

Labour For Spun Pole (V-6 P.No 87/ 3/a) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Base concreting. For 11 M Spun Pole (1000x1000x150 mm) (93/26A/c) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the wor...

•

Labour For Base concreting(V-6 P.No 87/ 3/a) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Pole concreting (without coping)) For 11 M Spun Pole (1000x1000x2500 mm) (93/26/B/d) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-i...

•

Labour For Pole concreting (93/26/B/d) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Coping for Poles 390 mm all around the pole for an height of 300 mm for Spun Pole (1130x1130x300 mm) (93/C b) ---- Including cost of all materials, with all lead lift and labour charges, complete as d...

•

Labour For Coping for Poles (93/26/B/d) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Special Cross arm with Cross Arm for EG Stirrups, braces, clamps, bolts, nuts & washers for vertical configuration (MS) For RCC Pole(92/19/A) ---- Including cost of all materials, with all lead lift a...

•

Labour For Special Cross arm (92/19/A) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

PG Clamp Rabbit to Rabbit(7/9/65 9.02) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM(6/59 /7.02 ) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of...

•

Labour Rabbit ACSR(60/65 /6.02) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod)(6/52 /6.06 ) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-char...

•

11 kV, 45 kN Polymeric Insulator (6/52 /6.10 ) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Releasing & Restringing of Rabbit ACSR Condoctor (61/67 /7.02)(4662*1.9) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of ...

•

11 kV, 200 Amps, Single Break GOS (CDS-26) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Labour Gos (CDS-26) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

H-Frame for mounting GOS(CDS-15) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Labour H- Frame (CDS-15) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Fabrication, supplying and erection, testing and commissioning of ….Mtrs Polygon high mast with single / Multiple telescopic sections having (minimum overlap distanace of 1.5 times of top section) t...

•

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS1554 (Part1) or IS7098 Part1, Armouring strip thickness in average 5% and ...

•

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In existing trench/duct. (41/6.5.1)In existing trench/duct.6 sqmm to 16 ...

•

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In existing trench/duct. (41/6.5.6)On wall /Structure 6 sqmm to 16 sqmm ...

•

Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating. (41/6.6.2)In soil [Hard] ---- Including cost of all materials, with all lead lift and...

•

Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. (42/6.9.2)5...

•

Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (42/6.11.3)32 mm dia. ---- Including cost of all materials, with all lead lift and labour charges, c...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

•

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. (40/6.3.2)GI Strips.25x6mm ---- Including cost of all materials, with all lead lift a...

•

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 Sqmm(43/6.17.6) ---- Including cost of all materials, with all lead lift and labour charges, ...

•

Supplying of LED Floodlight with .W System Power consumption pressure die cast aluminium housing with powder coating with IP 65 protection. 1, 200275V voltage with electronic Driver, PF0.9, should mee...

•

Fixing halogen/metal hallide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. (79/14.5) ---- Including cost...

•

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.(30...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacit...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C 50Hz 12/24v D.C. (29/5.38) ---- Including cost of all materials, with all lead lift and labour c...

•

Supplying, fixing and wiring rotary selector switch suitable for Ammeter. (29/5.27) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in...

•

Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which ...

•

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.60 to 70...

•

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers (32/5.48) ---- Including cost of all materials, with all lead lift and labour charges, ...

•

Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified I...

•

Supplying PVC/Gi Flexible conduit pipe. Mm dia fxing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddies at an interval of 300mm using NF s...

•

Supplying . fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32Amps ---- Including cost of all materials, with all lead lift and labour c...

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- Including cost of all materials, with all lead lift and lab...

•

KSRB 2-1.2 . Earthwork in surface excavation in Hard soil for levelling and lowering the ground manually ( other than foundation of buildings, culverts, road drains and trenches of pipe lines and cabl...

•

KSRB 4-1.3 . Providing and laying in position plain cement concrete of mix 1.4.8 with OPC cement @ 180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @...

•

KSRB 2.3 . Filling available excavated earth ( excluding rock ) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering ...

•

KSRB 4.2.2 . Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine ag...

•

KSRB 4-6.7 .Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels...

•

KSRB 4.9.2 . Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding ...

•

Annual Maintenance of Sri Rangapatna to Malai Mahadheshwara Betta Road (S.H.79) road from ch.14.40 to 22.80 km, 24.20 to 40.63 km & 41.30 to 59.59 km in T. Narasipura Taluk

•

Clearing & grubbing road land including vegetation, bushes, shrubs, saplings by using weed cutter / minor equipment. ---- Including cost of all materials, with all lead lift and labour charges,...

•

Patching of Potholes - Patching of Shallow Potholes using SDBC Gr II 25 mm thick - Patching of shallow potholes on asphalt surfaces by using Semi Dense Bituminous Concrete 25mm thickness. The ...

•

Maintenance of Earthen Shoulder (filling with fresh soil) - Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with app...

•

Replacement of Metal Beam Crash Barrier - Type - A, W : Metal Beam Crash Barrier - Replacement of W metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, ...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...

•

Bituminous Concrete Grading II for traffic <20 MSA - Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, pre...

•

Pedestrian Crossings as per IRC 99-2018 - Providing Speed Breakers/Raised pedestrian crossings in Trapezoidal section with 2.5 m Top width and transition length of 0.8 m length and height of...

•

Labour For Spun Pole (V-6 P.No 87/ 3/a) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Labour For Base concreting(V-6 P.No 87/ 3/a) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Labour For Pole concreting (93/26/B/d) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Labour For Coping for Poles (93/26/B/d) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Labour For Special Cross arm (92/19/A) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

PG Clamp Rabbit to Rabbit(7/9/65 9.02) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Labour Rabbit ACSR(60/65 /6.02) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

11 kV, 45 kN Polymeric Insulator (6/52 /6.10 ) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

11 kV, 200 Amps, Single Break GOS (CDS-26) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Labour Gos (CDS-26) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

H-Frame for mounting GOS(CDS-15) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Labour H- Frame (CDS-15) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

BID DOCUMENT - OTHERS.doc

Tender Document • 1.08 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].