SPECIAL REPAIR TO BLDG NO P 08 MD ACCN AND PROVN OF GUARD AND RECEIPTION ROOM AT TECH AREA AND PROVN OF WASHINGROOM FOR FWC ADM AREA OF CERTAIN UNITS UNDER GE GUWAHATI

Amount

Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings completed all as specified

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as directed having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, eave board fixed with self tapping screw complete all as specified and directed.

Demolition Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, etc complete all as specified and directed.

S&F Anodised aluminium snap grid frame work of size 605 x 605mm for false ceiling complete all as specified and directed.

M&L for 4 mm thick, Non asbestos fibre cement building boards fixed in ceiling or laid/ inserted to timber/GI/Aluminium frame work with screws, etc complete all as specified and directed.

Demolition of cement concrete on roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work etc complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete (sunken floor filling) complete all as specified and directed.

M&L PCC (1:2:4) type B-0 using 12.5 mm graded aggregate as in leveling course in roof padding etc complete all as specified and directed.

M&L for water proofing treatment on RCC roof comprising with the following:- (a) taking down/scrapping out existing old tarfelt bituminous compound including sweeping, cleaning, washing down to remove dust etc and removing debris to a distance not exceeding 250m (b) 15m thick plastering in CM 1:4 finished even and smooth and curing for minimum seven days (c) Preparing and cleaning of fully dried cement plastered surfaces (d) Applying one coat of cold bituminous primer to the plastered surfaces @ 0.4 litre per sqm confirming to IS 3384-1986 (e) applying a layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.50 kg per sqm reinforced with polyester non woven febric (weighing not less than 160gms per sqm) shall be applied over bituminous primer. Application of polymeric membrane shall be by touch application. The overlap shall be minimum 100mm on transverse direction and 75mm on longitudinal direction.( f) Applying one coat of aluminium paint over the APP based membrane @ 0.11 kg per sqm. complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing,including 15mm thick screed bed in CM (1:6) etc complete all as specified and directed.

M&L for machine cut kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing,including 10mm thick screed bed in CM (1:4) etc as in riser of steps,skirting, dado etc complete all as specified and directed.

Demolition of PCC in ground floor or paving of any description n.exc. 15cm thickness (Un re-inforced) below or above GL complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone agg as in plinth protection, sub base, finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick wall/stone wall, ceilings, sunken floors etc, racking out joints, hacking for key & scrubbing with water completely complete as specified and directed.

M&L for rendering 15mm thick plaster in two layers ( 10mm +5mm) on brick or concrete surfaces in CM (1:4) mixed with WPC on second layer finished the surface even and smooth without using extra cement complete all as specified and directed. (Note- supply only WPC shall be measured and paid seperately).

Supply only Liquid water proofing compound complete all as specified and directed.

M&L rendering 10mm thick plaster on other than fair faces of brick or concrete surfaces in CM (1:6) finished the surface even and smooth without using extra cement complete all as specified and directed .

M&L rendering 5mm thick plaster on ceiling, soffits of slab etc in CM (1:3) finished the surface even and smooth without using extra cement complete all as specified and directed

M&L for prepartion of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1.5mm thick wall care putty including a coat of primer complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying two coats of weather exterior acrylic emulsion paint over a coat of 1.5mm thick wall care putty including priming coat of exterior primer complete all as specified and directed.

M &L for preparing new plastered surface of ceiling and applying two coats of white wash complete all as specified and directed.

S&F Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Dismantling timber scantlings under 40 sq. cm in section as in fillets, rails, posts, rafters, purlins, etc. complete all as specified.

S&F plain fillets in 2nd class hardwood area exc 13 but n.exc 25 sq cm.square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L non-skid ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.18sqm but not exceeding 0.38 sqm in floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick Screed bed or bedding layer in cement mortar (1:4), complete all as specified and directed.

M&L non-skid ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.11sqm but not exceeding 0.18 sqm in floor etc.set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white or coloured cement to match complete including 15mm thick Screed bed or bedding layer in cement mortar (1:4), complete all as specified and directed.

M&L for glazed ceramic (coloured) tiles of size 450x350x6-7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing course in cement mortar (1:4) complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors , aprons etc. (Dismantling, Laid dry or laid and pointed) complete all as specified and as directed.

M&L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms,over 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc complete all as specified and directed.

M&L rounding to edges of stone slabs one edge, such as in steps, cooking platforms and other similar situations all as specified and directed.

M&L preparation of new or previously untreated surface of steel and iron work of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide primer complete all as specified and directed.

Taking down chowkats or frames (without taking off shutter from the frame) not exc. 1.5 sq.m each and removing complete all as specified & as directed.

Taking down chowkats or frames (without taking off shutter from the frame) exc. 1.5 sq.m but not exc. 4 sqm each and removing complete all as specified and directed.

S&F second class hard wood plain, solid, straight Chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size 25x3MM MS flat; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in bed block for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as directed.

S&F 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood Glazed & Skeleton shutters open rebated & prepare to receive glass, gauge etc without sash bars, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of member of shutter as specified in SSR Part I ,section 8, clause 8.24(a) fitted to chowkats complete all as specified and directed.

S&F in repair 18 mm thick, Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, etc completed all as specified.

S&F Continuous (piano) hinges,mild steel, bright finish or electro galvanised,Width of flaps (when open) in 30 mm etc complete all as spfd and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.40 mm & fixed with stainless steel wire staples fixed.

S&F solid PVC frame size 50mmx47mm made out of 5mm plain colour PVC sheet re-enforced with MS square tube complete all as specified and directed

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed.

S&F 100 mm long cold rolled mild steel butt hinges, medium weight,and fixed to chowkhat complete all as specified & directed

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as specified & directed

S&F 150 mm long aluminum handle fabricated type anodised.complete all as specified & as directed.

aS&F 100 mm long aluminum handle febricated type anodised.complete all as specified & as directed.

S&F 150 mm length of aluminium anodised barrel tower bolts of extruded section and fixed.

S&F 125 mm long aluminum anodised barrel tower bolt of extruded section complete all as specified & as directed.

S&F 300mm aluminium anodised sliding door bolt , with hasp and staple,( bolt type ) and fixing clips of sheet steel , cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

S&F in repair mild steel 300mm , ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

M&L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified & as directed.

S&F Aluminium anodised doors/windows /ventilators/partitions etc with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills, etc (The design/pattern, profile size & other dimensions shall be all as directed by Engineer-in-charge at site) including aluminium handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.

S&F 4mm thick sheet glass, frosted one side and glazing with oil putty in square not exceeding 0.5 Sq. m in each pane complete all as specified & as directed.

S&F 15 mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors, including taking up/down old tubing complete all as specified and as directed.

S&F 20 mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors, including taking up/down old tubing complete all as specified and as directed.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580mm x 440mm white with integral foot rest, provn and fixing of 10 litres capacity low level PVC flushing cistern, PVC connection pipe 15mm dia 600mm long with two check nut and washer of including provision of lime concrete bedding, connection to trap and flush pipe etc as in floor all as specified and as directed.

S&F in repair brass Chromium plated 125mm size shower roses with or without swivel joints, any size, including fixing to steel pipe or union, etc complete all as specifed and directed.

Supply and fixing as in repairs cast Copper alloy, chromium plated, fancy type, 15 mm bore angular stop valve with wall flange, screwed down, high pressure with crutch handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

S&F in repair 15 mm bore pillar taps,fancy type cast copper alloy chromium plated with capstan head screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm dia Bib cock fancy type with chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 20mm dia gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F in repair Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 Bore of pipes in 32mm,as waste pipe etc completed all as spd and directed.

S&F in repair 110mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction, single (Single T) equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 25mm dia, mild steel, decorative type, PVC coated, curtain rod with brackets complete all as per sample and as specified and directed.

S&F in repair brass chromium plated soap dish of approximate size 160mmx160mmx 90mm fixed to pl;ugs with chromium plated brass screws complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia D type 60cm long between the flange fixed complete all as specified and directed.

Supply and fixing 1000 liters rotational moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I including dismantling of old existing water tank and removing from site complete all as specified and as directed.

M&L for prepolished chequered cement concrete, coloured tiles,textured finished of size 250 x 250 x 25/ 300x300x25 mm thick set jointed in neat cement slurry and pointed with white cement and pigment in floors to match with colour of tiles, including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, taking out/laying UG cable etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in soft/ loose soil complete all as specified & directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil, complete all as specified and directed.

Removing excavated surplus materials (Soils) to a distance not exceeding 50 mtr and deposited where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply and laying dry river sand cushioning under floor in foundation including watering and consolidation and for cable protection with a layer of 8cm deep before laying and 15cm after laying gently punned down to 10 cm on top of the cable as per SSR Part-I complete all as specified and as directed. (Note : Punned thickness shall be measured).

M&L PCC (1:4:8) type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix) in (1:2:4) type B1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for column etc, basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L reinforced cement concrete (nominal mix) (1:2:4) type B1 using 20mm graded granite stone aggregate in columns, pillars, piers, posts, struts and the like complete, all as specified and directed by Engineer-in-charge. Note :- Reinforcement and formwork shall be measured and paid for separately.

M&L reinforced cement concrete (nominal mix) (1:2:4) type B1 using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item

Use and waste of flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surfaces of concrete complete all as specified and as directed.

M&L formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for fair finished flat surfaces of concrete complete all as specified and as directed.

M&L formwork to rough finished surfaces of flat concrete, sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6.00 m mean radius built in CM 1:4 complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and directed.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars 5mm to 10mm dia as in stirrups, spacers and binders cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia, complete, all as specified and directed.

M&L for preparation of new surfaces of walls and applying two coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete as per manufactur's instructions over a coat of primer and over and including 1.5mm thick wall acre putty complete all as specified and as directed

M&L for broken stone or boulders hard core of gauge n.exc. 63 mm, deposited, spread and leveled in layers n.exc 15 cm thick, watered and well rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2 using 40mm graded stone agg as in sub base complete all as specified and directed.

S&F Mild steel framed work in tubular trusses and tubular posts using ERW or induction butt welded tubes conforming to IS 1161-1979 Grade St-240 including necessary welding, bolting, special shaped washer, clamps, cleats etc. with and including one shop coat of zinc chromate primer paint complete all as specified & as directed.

S&F 15mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors complete all as specified and as directed.

S&F 20mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors complete all as specified and as directed.

S&F mild steel framed work conforming to Fe 290 Gde E-165 with ornamental and intricate design for such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, frames guard bars, barred iron doors, framed for opening of man holes, portion framed and hung as gates, pintle hinges stops, hand made sliding bolts etc and similar class complete all as specified and as directed.

Supply and fixing 1000 liters rotational moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I complete all as specified and as directed.

S&F factory made Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beads in squares not exc. 0.5 Sqm in each pane complete all as specified and as directed.

S&F 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm long aluminum handle cast type anodised.complete all as specified & as directed.

Supply and fixing vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, with inlet ball valve, float and brackets including flush pipe and PVC connection pipe 15mm bore with PTMT nuts of length 450mm, complete all as specified and as directed.

Supply and fixing Hand Shower ABS body (Health Faucet) with 8mm dia 1.2 metre long flexible tube with wall hook complete all as specified and as directed. Make-Jaquar Cat No. ALD-573 or equivalent make as specified in particular specification

Supply and fixing in repair toilet paper holder, brass chromium plated,with stainless steel strap fixed to walls with chromium plated brass screws complete all as directed. Make-Jaquar Cat No. AKP-35751P or equivalent make as specified in particular specification

Supply & fixing vitreous china urinal, full stall type, white including providing & fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including 40mm dia waste pipe of polythelene of low or high density or PVC 32mm dia (excluding flushing cistern)complete all as specified and as specified.

S&F urinal spreader of PTMT any colour for fixing with 15mm bore pipe (Minimum weight 60 gms) as per sample approved by the GE.

Supply & fixing vitreous Vitreous china urinal partition white of size 310x700 mm including necessary connection, fittings etc complete all as specified and as directed.

S&F 15 mm dia bib cock cast copper alloy, chromium plated, fancy type with crutch or butterfly handle screwed down, screwed for iron pipe long body and fixed complete all as specified and directed.

S&F 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing factory made soild PVC double door frame of size 50mm x 95mm made out of 5mm plain colour PVC sheet but single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with MS tube, supplying & fixing in opening as per specification and drawing complete all as specified and as directed.

Supply and fixing Factory made solid PVC moulded door shutter, 28 to 30 mm thick (style), with 2, 4 or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying and fixing in frame at site as all as per specifications and drawings as applicable to item 08101 given in SSR Part – II complete all as specified and as directed.

S&F 250mm aluminium anodised sliding door bolt , with hasp and staple,( bolt type ) and fixing clips of sheet steel , cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

Supply and fixing for Steel windows with side hung shutters including projecting type hinges with handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glass shall be measured and paid for separately).

Supply and Fixing PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F 75mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 Bore of pipes in 32mm,as waste pipe etc completed all as spd and directed.

M&L for 100 mm thick PCC (1:4:8) type D2 using 40mm graded stone agg as in sub base complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/semi-corrugated steel sheet, crimped type, 0.50 mm thick of any colour as directed having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for glazed ceramic (coloured) tiles of size 350X250X6-7mm / 450x350x6-7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing course in cement mortar (1:3) complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia D type 60cm long between the flange fixed complete all as specified and directed.

Supply and fixing cast Copper alloy, chromium plated, fancy type, 15 mm bore angular stop valve with wall flange, screwed down, high pressure with crutch handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F brass chromium plated soap dish of approximate size 160mmx160mmx 90mm fixed to pl;ugs with chromium plated brass screws complete all as specified and directed.

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and as directed.

M&L for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 volts grade drawn through and including non metallic rigid PVC Concealed conduit,medium grade minimum 20 mm dia ISI marked and conduit accessories fixed on recesses of wall/ceiling/roof and chisselling on wall complete and making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces etc with sunken type pressed steel/welded MS terminal boxes made out of 1.25 mm MS sheet for mounting of fittings like switch, socket and fan regulator with 3mm thick hylum laminated sheet cover including cutting chases pining in for concealed conduit wiring amd making good of disturbed surface complete for the following srl item No. 133.00 to 136.00 :-

One light/fan/ Bell point controlled by one one way switch complete all as specified and as directed.

One 3 pin 5 Amps socket outlet on same board with other switch complete all as specified and directed.

One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size complete all as specified and directed.

All as per item No. 132.00 above but wiring with 2.5sqmm multistranded copper conductor unsheathed and 2.5sqmm copper conductor unsheathed cable as earth continuity conductor for 6 pin 6/16 Amps socket combinationon independent board complete all as specified and as directed.

Supply and fixing Modular switch one way 10 Amp, single pole, 240 Volts complete all as specified and as directed.

Supply and fixing Modular socket 2/3 pin plug, 6 Amps, multi socket 240 Volts complete all as specified and as directed.

Supply and fixing Modular switch one way modular type, 16 Amp, 240 Volts complete all as specified and as directed.

Supply and fixing Modular socket 6A/16A, 5 in one modular typoe, 240 volts complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite two to three terminal 65 x 50 mm three terminal 250/230 volts ISI marked complete all as specified and as directed.

Supply and fixing modular electronic fan step regulator, tiny, EME, 100W, A/C 240 Volts complete all as specified and as directed.

Supply and fixing Bell push flush type 5 Amps complete all as specified & as directed.

Supply and fixing Ding Dong AC 230 Volts single pole. complete all as specified & as directed.

M&L for Lamp holder, PVC/Polycarbonate type with back plate strainght or angular suitable for batten fitting complete all as specified and as directed.

Supply and fixing as in repair LED light lights fitting 1x18W/20W, 220V, AC decorative box type with CRCA body precotaed white & pre wired for driver, holder connecting up with LED down rod three core flexible copper conductor cable of suitable size from ceiling rose including 1x20 w LED tube light complete all as specified and as directed.

M&L for sub main wiring using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLS) ISI marked drawing in and including 20mm dia rigid non metalic PVC concealed and conduit & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including 6 Sqmm earth wire, PVC insulated & unsheathed including taking down old submain wiring of any type, complete all as specified and as directed. NOTE: 2 runs of main wire, 1 run of earth wire, 1 run of PVC Conduit with accessories shall be measured as one length.

M&L for sub main wiring using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLS) ISI marked drawing in and including 20mm dia rigid non metalic PVC concealed conduit & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including 4 Sqmm earth wire, PVC insulated & unsheathed including taking down old submain wiring of any type, complete all as specified and as directed. NOTE: 2 runs of main wire, 1 run of earth wire, 1 run of concealed conduit with accessories shall be measured as one length.

Supply and fixing as in repair factory made board distribution in sheet steel enclosure double door glazed with 200 Amps rated bus bar, SPN, 12 ways, 240 Volts suitable for housing MCBs complete all as specified and as directed.

Supply and fixing as in repair of Vertical TPN 4 Way, 415 volt with provision and including of MCCB of 63 Amp 4 pole and provided with CRCA sheet steel powder coated, double door ready to use DBs provided with insulated vertical phase bus bar, neutral bal,. earth bar, sticking saddle, colour coded interconnecting wire set, cable ties, blanking plates etc complete all as specified & as directed.

Supply and fixing as in repair MCB, SPN, 415 volts, B Curve, 40 Amps, 10 KA, complete all as specified and as directed.

Supply and fixing as in repair MCB, SP, 240 volts, C Curve, 10-32 Amps, 10 KA, complete all as specified and as directed.

Supply and fixing exhaust fan, steel body AC single Phase, 230/240V of size 300 m sweep with, blades, and frame and louvers, reqd length of twin core PVC 1.5 Sqmm FRLSH copper conductor for connection of exhaust fan from ceiling rose to connector of fan, and all other required items i.e. hold fast, nuts and bolts etc and making good the disturbed surface to match with existing surfaces including painting/white wash/putty as required including taking down and depositing MES store yard complete all as specified and as directed.

Supply and fixing as in repair LED security light fitting 35 Watt, new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP-66 roadway luminaire with high power LED source with acrylic cover complete all as specified and as directed. Make: Crompton Cat Part No.TRP-400-35-57-SL-LM-NSR or Equivalent approved make as specified in particular specification.

Material and labour for 40mm bore light grade GI pipe fixed as bracket, on wall any type, not less than 1.5 m long and bent to shape as required complete with sutiable clamp made out of 25x4mm Flat iron duly fixed 12mm dia nuts, bolts, washers etc fixed to pole complete with two coats of aluminium paint over a coat of red oxide complete all as specified and as directed

Material and Labour Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 mtrs deep below normal ground level) with the top edges of plate not less than 1.5 mtrs below normal ground level connected to GI strip of 25X4 mm by means of GI nuts, bolts check nuts and washers earth lead protected by 15mm dia GI pipe light grade and connected to main distribution board/earthing test point all as shown in electrical plate No 3 of SSR part 1 and all as specified including testing on completion. Notes:-The unit rate also including for excavation, earth work in any type of strata, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix , type B1 cover reinforced with 8mm dia TMT bars @150mm C/C both ways ,GI funnel with GI watering pipe 20mm dia med grade, wire mesh, protection pipe 15 mm dia GI pipe light grade for earth lead upto 7.50m long, charcoal & salt complete all as specified and as directed.

Material and Labour for bricks common burnt clay, building brick, sub class B designation 75 old size bricks laid in trenches flat over sand cushioning for cable protection complete all as specified and as directed.

Supply and fixing / Laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor of size 25.0 Sqmm x 3.5core, 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and as directed.

Supply and fixing / Laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor of size 50.0 Sqmm x 3.5core, 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and as directed.

Supply and fixing / Laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor of size 10.0 Sqmm x 4core, 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and as directed.

Supply, install, testing and commissioning of floor mounted LT OUTDOOR feeder pillar box CPRI Approved AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for indoor use , with bottom cable entry with suitable cable glands structure made out of 2.00 mm thick CRCA steel sheet of Size (0.9 x 0.9 x 0.6) m with angle iron frame work and legs of ISA 50X50X5 mm, with four legs grouted to PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter, changeover switch and MCCBs , hinged doors at front with suitable locking arrangement , Provision of louvers at sides, structure treated under 8 - tank metal treatment process and duly powder coated, complete all as specified and directed with the following:- (a) BUS BAR : Aluminium bus bar 160 Amps , supported on non hygroscopic fibres and brass screws for mounting -04 Nos (b) INCOMER : Supply and fixing MCCB 4 pole 415 Volts of breaking capacity of 16 KA of 100 Amps with Fixed thermal and Fixed magnetic setting- 01 Nos (c) INDICATING DEVICES : (i) Supply and fixing LED Indicating lamps for Main Supply indicating R, Y, B - 03 Nos (ii) Supply and fixing Digital Ampere Meter of size 100mmX100mm for 0-300 A display, incl CT having CTR 200/5 - 01 Nos & Digital Voltmeter 0-500 Volts , SIF 96 - 01 Nos

M&L for Boring/drilling (horizontally) hole manually under existing road, pavement, hard standing (maximum 10mtr in width) suitable for passing GI tubing of 40 to 150mm bore dia complete all as specified and as directed.

Supply and fixing 50mm bore GI protection pipe, light grade including all fittings laid in trenches or fixed on pole/walls with mild steel clamps, bolts, nuts and washers complete all as specified and as directed. NOTE : Earth work reqd shall be measured and paid separately.

Supply fixing as in repair steel tubular swaged pole 9.00m long Type -410 SP-31 conforming to IS-2713 part I to III 1980 with and including cast iron base plate, finial taper plug,nuts, bolts and washers etc. and fixed into plain cement concrete foundation duely painted with two coats of aluminium paint over one coat of red oxide primer including preparetion of surfaces and making strip 150mm wide upto 1.50m( above PCC coping) by black, yellow paint in alternate layers and pole nos. including dismantling of old poles of any description including demolition of concrete foundation complete all as specified and directed. NOTE: (i) Earth work, cement concrete will be measured and paid seperately. (ii) All other accessories and work shall deemed to be included in the qioted unit rate. noting extra shall be paid.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver , lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing, in repair, 3- layer PP-R (Polypropylene random copolymer) pipes 90 mm outer dia, SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene random, jointing complete including laid in trenches/floor at places where directed complete all as specified and directed.

Supply and fixing 50mm bore GI protection pipe, medium grade including all fittings laid in trenches or fixed on pole/walls with mild steel clamps, bolts, nuts and washers complete all as specified and as directed.

Supply and fixing 25mm bore GI protection pipe, medium grade including all fittings laid in trenches or fixed on pole/walls with mild steel clamps, bolts, nuts and washers complete all as specified and as directed.

S&F 25mm dia gun metal globe or gate valve with iron wheel head screwed both ends for iron pipeincluding all necessary fittings complete all as specified and directed.

Supply and fixing factory made board distribution in sheet steel enclosure double door glazed with 200 Amps rated bus bar, SPN, 4 ways, 240 Volts suitable for housing MCBs complete all as specified and as directed.

Supply and fixing / Laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor of size 10.0 Sqmm x 2core, 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and as directed.

M/S SEWAK SINGH (BID ID -3411886)