8196 COMPREHENSIVE REPAIR TO JOINERY, PLASTERING AND FLOORING IN LHS OF LION GATE TO L5 BLDG AREA UNDER DOCKYARD UNDER AGE B/R II UNDER GE (NW) KUNJALI

Amount

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each

Taking down shutters of any description not exc 1 sqm each

S&F 2nd class hard wood (sal) plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

S&F 35mm thick factory made 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated

S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side.

S&F 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats of Second class hard wood.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth and applying two coats of varnish over a coat of wood filler liquid transparent etc complete all as specified.

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying a coat of synthetic enamel paint over a coat of pink primer etc complete all as specified.

S&F 100mm Butt hinges, cast brass with mild steel hinge pin,bright polished and fixed, type B-11 etc complete all as specified and directed.

S&F in repairs 100mm Butt hinges, cast brass with mild steel hinge pin,bright polished and fixed, type B-11 etc complete all as specified and directed.

S&F 75 mm Butt hinges, cast brass with mild steel hinge pin,bright polished and fixed, type B-11 etc complete all as specified and directed.

S&F in repairs 75mm Butt hinges, medium weight, cold rolled mild steel with hinge pin fixed in repairs etc complete all as specified and directed.

S&F 300mm long Brass,sliding door bolt with sand or die cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc complete all as specified and directed.

S&F in repairs 300mm long Brass,sliding door bolt with sand or die cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc complete all as specified and directed.

S&F 125mm Brass barrel tower bolts,with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified.

S&F in repairs 125mm Brass barrel tower bolts,with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified.

S&F Brass handles of size 150mm, cast type,polished bright etc complete all as specified.

S&F in repairs Brass handles of size 150mm, cast type,polished bright etc complete all as specified.

S&F aluminum handles of size 75mm, cast type anodised etc complete all as specified and directed.

S&F in repairs aluminum handles of size 75mm, cast type anodised etc complete all as specified and directed.

Dismantling floor hearth or wall tiling, cement concrete tiles including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

All as per item No. 25 above but as in skirting including 10mm thick rendering in CM. 1:4 as backing coat etc complete.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified.

M & L for Coloured glazed ceramic tiles in vertical surface 450 X 300 X 7 mm thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified.

Taking down cement plaster or cement lime plaster on brick on stone walls etc including raking out joint, hacking for key, scrubbing down with water incl clearing off debris out of MD land etc complete all as specified.

M&L for rendering 20mm thick (15mm inner coat and 5mm finishing coat) on fair faces of brickwork or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including WPC etc complete all as specified and directed.

Supply only water profing compound complete all as specified.

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:3 on ceiling incl finishing the surface even and smooth without using extra cement etc complete all as specified.

M&L for preparation of newly plastered surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance,dirt resistance exterior paint of required shade ( Company depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.9 litre/10 sqm over new surfaces etc complete all as specified and directed. Note : Engg in charge will decide the make/brand.

M&L for applying 3mm thick wall care putty on walls etc complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil emulsion of distemper etc complete all as specified and directed.

Complete removal of existing treatment on wall surfaces including washing,rubbing down and stopping of distempered and painted surfaces etc complete all as specified.

M&l for complete removal of existing treatment on ceiling including washing,rubbing down and stopping of distmepering and painted surfaces etc complete all as specified.

M&L preparation of old decorated surfaces of walls, soffits, roof facia & applying one coat of weather proof acrylic based paint (100% acrylic) all as specified & directed. Make Asian paints apex ultima or equivalent as decided by Engg-in-charge.

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper all as specified and directed

M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards, false ceiling, wall panneling & partation boards bonded wool, blanket slab incl aluminium grid frame work complete all as specified and as directed

S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling all as specified.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for false ceiling made out of 600x600x 4 mm thick ( non asbestos fiber cement designer/coloured)ceiliing board / tiles deep panel

M&L for POP false ceiling using 600 x 900 x 12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work main joist of size 50 x 25 mm spaced at 750 mm centre, secondary joist of size 75x20 mm fixed to main joists spaced t 900 mm suspended to roof members using 25 x 25 x 2 mm GI angles and fasteners @ 1.2 m C/C including decorative design/pattern all as specified and directed Engr-in-Charge.

M&L for applying one coat of bitumen primer (Black Magic/equivalent) @ 1Ltr/Sqm suitable for arresting leakage/seepage of rainwater, applying with spray or brush and ensure all the cracks should be sealed properly as per manufacturer's instruction etc all as specified and directed. Note : Payment will be made only after testing and executed satisfactorily as per Engg-in-charge.

M&L powder coated Aluminium frame and shutter for doors, sliding windows & ventilators (moveable louvers type) and for prtitions with one or more rebates including joining cleat for fixing etc. Rubber gasketing all round the panels/ shutters to fix glass, PVC gasketing in all channels, locking arrangement, (minimum thickness of powder coating 50micron) complete all as specified.

S&F 5mm thick glass sheet one side frosted ordinary quality and glazing with in square, n exc 0.5 Sqm in each pane, fixed to Aluminium windows/ventilator in repairs.

S&F 4.8mm thick glass sheet one side frosted ordinary quality and glazing with in square, exc 0.5 Sqm in each pane, fixed to Aluminium windows/ventilator in repairs.

S & F in repairs 12 mm thick pre-laminated Medium Density board,both side decorative lamination interior grade,fixed in aluminium/ wooden frame work.

S&F 3 mm thick aluminium composite panel cladding plain of approved colour/shade to beam/column/slab incircular/rectangular shape inbcluding cutting, notching, bending to shape as required jointing with silicon gel of approved colour & aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm C/C on exceeding column/beam/slab to hold APC cladding etc (Note : colour/pattern of ACP sheet shall be given by GE).

Providing and applying double layer with Chowgule Koster dachflex super crack sealer for repairing the cracks of the external wall areas. MAKE: Chowgule Koster (I) Construction Chemicals Pvt. Ltd

S & F in repairs 8 mm to 10 mm thick wooden flooring and skirting including spung/polythene complete all as specified and directed (Make hego/pergo or equivalent)

S&F mild steel flat iron such as in hold fast etc or similar small articles conforming to Fe- 410-0 or 310-0.

S & F in repairs prelaminated 12mm thick particle board exterior grade prelaminated both sides with decorative choice lamination fixed with screws to timber/ metal frame work in repairs complete all as specified and directed

M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved,fixed with approved adhesive as per manufacturer's instruction complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing etc complete all as specified.

S&F Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings etc all as specified.

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site all as specified and directed.

S&F stainless steel butt hinges of 100mm size.

S&F 100mm size anodised aluminum handles,cast type etc complete all as specified.

S&F 150 mm long aluminum alloy,anodised,sliding door bolt with hasp,staples (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminum alloy and fixed etc complete all as specified

S&F 100mm long aluminum anodised barrel tower bolts of extruded sections and fixed etc complete all as specified.

M&L in repair for providing and applying coloured high performance 3mm thick polyurethane concrete, self-smoothening, self levelling on concrete surfaces, Heavy duty, solid colour, four component , water dispersed polyurethane concrete designed to provide excellentresistance to abrasion, impact chemical attackand other physical aggression. Compressive strength min 55Mpa(Astm D695), flexural resistance min 19 Mpa(Astm D 790) Tensile strength min 9.5 Mpa (Astm D882) Carry out surface preparation including grinding with wire brush, proper cleaning, removing of loosemortar, paint resudual, surface preparation, groove cutting & cleaning all dirt, debris to achieve a sound surface. opening the joints to 5 to 10mm width and depth and tilling them with polyurethane concrete-high strength self smoothening underlay upto full depth. Application of scratch coat and followed by application of final top coat 6mm thick by mixing base, hardener, colour paste and aggregates (as per manufacturer specification) complete as per specification and as directed by Engineer-in-Charge.

Material and labour for gently cleaning the surface of the stone masonry and piers with specialized water misting techniques employing air water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone surface without over wetting, followed up by gentle brushing with soft nylon brushes as specified and milded. Gentle surface cleaning may include using water misting and PH balanced surfactants as specified for indicated areas to remove surface dirt grit surface accretions, lime wash painting etc by means of water misting and PH balanced surfactants and cleaning complete all as specified and as directed. Note :- Quoted rate shall be inclusive of removing vegeration on wall surfaces, chajjas etc and errection and dismantling of MS tubular double scaffolding upto G plus 6 storey bldg and provision of necessary safety equipments to the skilled workers to carry out work.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.4mm.

S&F in repairs Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

S&F in repairs 4 mm thick bakelite sheet with decorative choice laminated on both side completion as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Framed work such as grills, gratings, sun shed etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars, barred iron doors, ladders, farmed balastures, walk ways, railings, frame work of water tanks and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

M&L for preparing new or previously untreated surface of steel of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces exc 10 cm width or girth and applying one coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and directed.

Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed.

M&L brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed

M & L for water proofing treatment of sunken floor/wall surfaces by applying two coats of water proofing chemical and cement mix in ratio 1:1.5, (PIDICRETE UPR or equivalent approved water proofing chemicals), complete including PCC 1:7:12 type F2 using 40mm graded aggregate as in filling all as per manufacture's instructions and as directed, Make : Dr. FIXIT, Chemisol, Choksy Chemicals.

M&L for erection & dismantling of MS tubular double scaffolding (H frames) upto required height & with necessary brassing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green hessain cloth upto top of the scaffolding for carring out external facework of walls all as directed by Engr-in-Charge.

Removing debris exc. 1.50 Km but n exc. 20 Km and depositing where directed, in soil outside MD land.

M&L for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

S&F Toughened glass 10mm thick, as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes as required.

Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.

Dismantling single layer mangalore pattern or similar tiles in roofing laid dry

All as per item No 88 above but bedded in cement mortar

Dismantling of tile battens of any size incl fillets spacing exc 15 cm complete all as specified.

S & F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275.

S & F 0.63mm thick plain galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length nd girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers.

Dismantling of unframed timber scantling 40sqcm and over in section in any position all as specified.

Dismantling of unframed timber scantling under 40sqcm in section in any position all as specified.

Dismantling boarding of any description, fixed in any postion with nails complete all as specified.

M&L for second class hard wood timber scantling clean sawn unframed complete all as specified.

All as per item No 96 but except timber

S&F 2nd class HW plain fillets clean sawn square, rectangular or triangular in section, sectional area exc 13 but n.exc 25 sqcm fixed with nails all as specified and directed.

M&L for 2nd class HW battens for tiles etc clean sawn sectional area exc 15 and n.exc 25 sqcm and spacing of 30 cm centres etc complete all as specified.

M&L for roof tiles, Mangalore pattern , interlocking at side joints laid dry.

M&L for ridge tiles mangalore pattern bedded and jointed in cement mortar 1:6 etc complete all as specified and directed.

M&L for preparing the surfaces of tiles battens new or old of any size and spacing and applying two coats of creosote oil all as directed (measured over all one side only, spaces not deducted).

S&F for 2nd class HW boarding 25 mm thick planed one side with butt joints and fixed with nails in any position.

Complete removal of existing water proofing treatment incl PCC of any description in any position including cleaning, wire brushing, watering, as directed by Engineer-in-charge complete all as specififed and as directed.

Disconnecting existing water tanks, any capacity of tank setting aside (or lowering if required) for repair etc and hoisting reconnecting and refixing in position complete all as directed by Engr in Charge.

M&L for providing water proofing treatment with five layered 4mm thick APP (Atactic Polypropylene) modified bituminous membrane re-inforced with no woven polyester mat of weight not less than 180 gms/Sqm as centre core and without multiple layers of polythene finished on top and bottom with 7 micron thick flammable polythylene applied by thermo fusion using LPG torch on bottom portion of the membrane after applying a coat of bituminous primer @ 0.25 Kg/Sqm over roof and over the APP membrane provide a polypropylene/ polyester, Non woven geotextile fabric of 150 gsm over the geo textile fabric (An overlap of 100mm at end & 75mm shall be provided on sides ends respectively) etc all as specified and directed by EIC. . The membrane shall be inserted in the wall at the height of 800 mm by cutting groove in the wall finished by membrane flashing.

A.R. ENTERPRISE (BID ID -3347942)

jalandhara construction (BID ID -3349360)

SHRI SAI ENTERPRISES (BID ID -3346058)

SR Construction (BID ID -3345564)

Sachin santosh dalvi (BID ID -3345345)

H R Enterprises (BID ID -3344775)