Development of Nandavanam Heritage Park Package III in Mamallapuram

Earth work Open excavation by Mechanical Means for Open Earthwork in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and ramming of bottoms etc., complete complying with standard specification and as directed by the departmental officers.

Earth work excavation for foundation by manual means for RR/Brick and Other step type footings for Load bearing structures in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.departmental officers. Foundation Up to2.00Mtr

Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc. in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and ramming of bottoms etc., complete complying with standard specification and as directed by the departmental officers.- Upto 2.40m Footing Depth.

Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms at the site, etc., complete complying with standard specification and as directed by the departmental officers.Foundation Up to 3.3Mtr

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers well rammed, watered and consolidated etc. complete complying with standard specification

Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification. standard specification and as directed by the departmental officers.

Supply and filling in foundation and basement with Gravel in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with conveyed earth in layers of not more than 150mm thick layers well watered, rammed with surface vibrator and consolidated including conveyance charges etc. complete complying with standard specification and as directed by the departmental officers.

Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by place method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc., complete as per technical specification and as directed by the departmental officers. Morth - Rev V No. 111,112,401,900

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per clause 406 of MORTH specifications.

Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10square meter area including cost of bituminous binder, including labor charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev-5 Specification

Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labor charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications

Providing and laying 50 mm compacted thick Dense bituminous macadam using 0.24 cum of 26.5-13.2 mm graded metal and 0.25 cum of 13.2-2.36 mm graded metal and 0.23 cum of 2.36 mm & below metal with 53.20 kgs of 60/70 bitumen for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tones capacity conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc., including labor charges for loading bitumen in to bitumen tank and metal to feeder antilabor for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler, tipper trucks, paver finisher, vibratory rollers and all other tools and plants required, including all other incidental charges etc., complete using C M P clause 505 of MORTH Rev-5 specifications.

Providing and laying Bituminous concrete to 40mm thick using 0.13 cum of 19.00-9.50 mm graded metal and 0.17 cum of 9.50-2.36 mm graded metal and 0.26 cum of 2.36 mm & below metal with 45.27 kgs of 60/70 bitumen & 5.03Kg of Plastic waste (Total-50.30 kg) and for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tones capacity conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 40mm / 30mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc., including labor charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler, tipper trucks, paver finisher, Vibratory rollers and all other tools and plants required, including all other incidental charges etc., complete using C M P clause 507 of MORTH Rev-5 specifications.

Removal of Excavated Excess Earth away from the site to 3K.M including loading and transportation charges etc, complete as per standard specification.

Providing and laying of hot applied Thermoplastic Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied Thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35- 2015. The finished surface to be level, uniform and free from streaks and holes etc., complete as per MoRT&H specification No.803

Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 600mm x 100mm in Cement Concrete 1:2:4 (One cement, Two crushed stone sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Crushed Stone Sand) to full depth of slab etc., complete complying with standard specification and as directed by the departmental officers.

Supply and laying in position of dressed stone slab of 50mm thick Flammed of 450mmx 450mm over a sand bed of 100mm thick and Pointing the joints to full depth with Cement mortar 1:3 as directly by Departmental officers etc., complete compling with standard specifications.

Painting New Plastered Wall Surface with One finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers -Mixing by mechanical means

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. using mild steel sheets of size 1200cm x 60cm and 10 BG stiffened with welded mild steel angles of size 40mm x 40mm x 5 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner, Top Horizontal stiffener spaced at about 60cm to 90cm center to center or at suitable intervals. MS Channel Section (ISMC 100) shall be provided as a vertical support @1.20m C/C and with Lateral support of Steel Adjustable Telescopic Props of Size 2m x 2m (expandable up to 3.60m) & steel pipes of 20mm Dia @ required level/spacing etc. complete complying with standard specification and as directed by the departmental officers. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete c. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm center to center or at suitable intervals etc. complete in all floors complying with standard specification. (Payment for centering shall be given after the concrete is laid).

For works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs et

plane surfaces such as RCC Floor/Roof beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting above 3.60m upto 4.90m height in all floors

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting up to 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable up to 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable up to 3.60m) made with outer steel pipe with Dia 50mm (3.60mm thick) and inner steel pipe with Dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc. complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. .

Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable up to 3.60m) made with outer steel pipe with Dia 50mm (3.60mm thick) and inner steel pipe with Dia 40mm (2.90mm thick).etc.. Complete in all floors complying with standard specification. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers.

Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc. with necessary supports and strutting up to 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable up to 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable up to 3.60m) made with outer steel pipe with Dia 50mm (3.60mm thick) and inner steel pipe with Dia 40mm (2.90mm thick) , etc. complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton.

UPTO 90 CM

UPTO 3.2M

Providing and laying in position, Standardized Concrete Mix M-30 Grade using In-situ Concrete batching plant/ Ready Mix Concrete (RMC) adopting weigh batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticizer / superplasticizer) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including Conveyance of concrete from batching plant to Work site, Electricity charges and other works & labour cost involved for concrete production, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards.

Providing and laying in position, Standardized Concrete Mix M-30 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticizer / superplasticizer) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards.

Basement

Ground Floor

First Floor

Cement Concrete 1:2:4 (One Cement, Two crushed stone sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including Super Plasticiser, mixing charges for machine mix, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers - machine mix a). Below Ground Level

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.

Basement

Ground Floor

First Floor

Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 9” x 4 3/8” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally. Other type of bond shall be done as directed by the Executive Engineer in charge

up to basement

Ground Floor

First Floor

Brick partition walls of 11.50cm thickness using best quality Burnt Clay Brick of size 9” x 4 3/8” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)

Paving the floor with best approved quality fine polished Granite Stone Slabs of following size and Variety with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching coloring pigments etc., complete complying with standard specification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work)

Paving the floor with best quality vitrified Tiles of following size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Finishing the top of roof with one course of machine pressed tiles of following size of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officer

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the departmental officers.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers.

Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three M- Sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications

Plastering the surface of walls with Cement Mortar 1:4 (One cement and Four plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used , curing etc., complete complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and color over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and color of paint should be got approved by the Executive Engineer before use on works.)

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete. PWD SOR P.No 98. M-0651

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and color laid in accordance with IS 1443 over a cement mortar bed of 20mm thick in Cement Mortar 1:3 (One Cement and Three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and pointed with white cement mixed with coloring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / color glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving Hydraulic pressed cement Mosaic Tiles of approved color and size 20cmx20cmx20mm finished thickness with small verona or Indian marble ( other than salem magnesite ) with cement mortar 1:3,20mm thick and pointed with the same color cement including polishing with power polisher to a high degree of polish so as to be perfectly smooth and glossy

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamel painting as per Design given by the departmental officers etc., complete as per standard specification

Supply and run of 2 of No.8SWG GI wire for guarding with cradle with No.8SWG GI wire at the equal interval of1.5 meter

Supply and fixing of horizontal type 4way triple poleneutralMCB distribution board insheet steelenclosure double door (metal) wit h40A 4pole MCB isolater as incoming and 12 Nos.6Ato32ASP MCB as outgoingi nflush wit hwall and making good of the concealed portion with earth connection.The MCB DB and MCB' sshould be with the ISI mark

Supply and fixing of 8 way single pole and neutral MCBsheet steel enclosure distribution board with double door (metal) 1No .32A DP MCB as incoming and 6No .6Ato32A SP MCB outgoing inflush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB 's should be with ISI mark (likestandard make)

Supplying and Fixing SFRC Manhole Cover 60 x 60cm (Heavy Duty) with Frame Including all Labour Charges etc

Supplying and fixing of 2000 litters capacity PVC tank of approved quality including cost of all materials like tank fittings, lead .lift, refection etc. complete.

Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc.,.including labor for cutting and threading of G.I.Pipes etc., complete complying with standard specifications for both internal and external water Supply arrangements.

25mm Gun Metal Valve

32mm Gun Metal Valve

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements

25mm Pipe Coupler

32mm Pipe Coupler

25mm Pipe Elbow

32mm Pipe Elbow

25mm Pipe Bend

32mm Pipe Bend

25mm Pipe Tee

32mm Pipe Tee

25mm Pipe End Cap

32mm Pipe End Cap

25 mm x 20 mm Reducer

32 mm x 25 mm Reducer

25 mm x 20 mm Reducer Tee

32 mm x 25 mm Reducer Tee

25 mm x 20 mm Reducer Elbow

32 mm x 25 mm Reducer Elbow

25mm Pipe Jet Nipple

32mm Pipe Jet Nipple

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diameter brass chromium plated piller tape,32 mm diameter C.P. Waste union, 32 mm diameter P.V.C. waste pipe with rubber plug and chain, 15mm diameter G.M.wheel valve, 15mm Dia brass nipple, 15mm Dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anticorrosive paint including testing for leakage etc., complete complying with standard specifications

Supplying and fixing in position White / Color Special Deluxe Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm P or S trap connecting with CI pipe of 100mm Dia / PVC pipe of 110mm Dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) with 10 liters capacity flushing tank with all internal dual flush fittings with normal seat cover Wall Fitting

S/F in position of Indian Make White/Color glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection ,15mm Dia G.M.Wheel valve, fixing the urinal to the wall in position with necessary T.W.plugs ,clamps, screws, shellac etc., including dismantling masonry if necessary and redoing the same to original condition ,fixing the 15mm dia. G.I.pipe connection and wheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications. - White Color

Supply and fixing 16amps DP switch with metal clad(side handle) of 500 V with F & N on suitable teak wood Board of size 30cmx20cmx6 cm including necessary internal confectioners connection etc., complete

Earthing as per ISI Specification with an earth electrode of 2.1mt class 'B' GI pipe of Dia not less than 40mm and with 20mm Dia copper earth flat of size 125mm x50mmx6mm, with funneling arrangement using charcoat, common salt, G.I.reducer, check nuts etc., and masonry workhand providing RCC cover slab 38mm thick for the Brick Mansory including cost of steel and fabrication of reinforcement etc., complete in all respects as directed by the departmental officers.

Earthing as sper the ISI specification with a nea rthe lectrode o f2.10 metre Class'B'GIpipe of dia not less than 40mm with copper earth plate of size 125mmx 50mm x 6mm with necessary funnel ingarrangemen tswith necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and fixing of 16A TPN metal clad switch on suitable angle iro nwor kwith cable entry boxes for incoming andoutgoing with PWD earthing

Supplying and run off 8 SWG GI wire on walls or below ground level with necessary 'U' nails, earth work excavation and refilling & including the cost of all materials etc., complete in all respects as directed by the departmental officers.

Supplying and fixing of 4 way Single phase DB of 16amps/way with 16amps DP switch with metal glad of 500 volt(side handle) with Fuse and Neutral of suitable T.W. Board of size 40cm x30cmx6.3cm with earth connection etc., complete in all respects as directed by the departmental officers

Supplying and fixing of 5 A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch concealed in suitable MS box in flush with wall and covered with 3mm thick hylem sheet

Supplying and fixing of 5 A /15A 3 pin flush type wall socket with15A flush type switch concealed in suitable MS box in flush with wall and covered with 3mm thick hylem sheet including cost of wall socket, switch and labor charges of wall cutting, grouting, flushing and making good, painting with primary and finishing coat for MS box etc., complete as directed by the departmental officers.

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections. Lower End

Supply and fixing of 20 Amp DP Plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For A.C Plug) (Legrand (MDS/Hager (L & T make)

Supplying and fixing MCB isolator 32A TP with earth connection (Legrand (MDS/Hager (L & T make)

Wiring with 2x1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5AFT switch with painting of suitable color for open PVC light point / fan point (for electronic regulator) (5 points per coil)

Wiring with 2x1.5sqmm PVC insulated single core unsheathed copper conductor cable of 1100V grade with ISI mark confirming to IS: 694/1990 in suitable PVC rigid pipe of 1.8mm thick with ISI mark concealed in wall and ceiling with PVC a0.45essories in flush with wall including the cost of cable, pvc pipe and specials, ceiling rose, flush type 5ams SP mark switch, PVC junction box, 16gauge MS switch box 300mm x 200mm x 75mm covered by laminated hylem sheet 3mm thick, cement, labor and making good of concealed portion with suitable color for concealed pvc Fan point.

Wiring with 2x1.5sqmm PVC insulated SC unsheathed CU conductor of 1100 V grade with ISI mark confirming to IS: 694/1990 in suitable PVC rigid pipe of 1.8mm thick with ISI mark concealed in wall and ceiling with PVC accessories in flush with wall for 5 AMPS 3 PIN C.S. PLUG POINT AT CONVENIENT PLACES including the cost of cable, PVC pipes and specials, brass screws, flush type 5 amps 3 Pin C.S. plug, 16 gauge MS joint box, 16 gauge MS switch box covered by laminated hylem sheet 3mm thick, cement, labor and making good of the concealed portion with suitable color for open plug point.

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 4 points / Coil) Higher End )

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection by 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of Suitable colour for PVC Light point / fan point (for electronic regulator) ( 4 points / Coil) Higher End End

Wiring with 2 x 4 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitablePVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point ( 8 points / Coil) Higher End

Supply and run off 2 of 1.50sqmm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark confirming to IS:694/1990 with continuous earth connection by means of 1.50 sqmm PVC insulated single core unsheathed copper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labor etc., complete in all respects as directed by the departmental officers.

Supply and fixing of 20W 4 Feet LED Fitting with LED Including cost of materials, loading and unloading charges etc., Complete

Supply and fixing of 18W LED 3000K Round type recessed fitting (Philips/Havells) complete with T.W round blocks on wall or ceiling with flu tube with PVC unsheathe copper leads from terminals to the filling Including cost of materials, loading and unloading charges etc., Complete as per specification.

Supply and fixing of 300mm (12") sweep (lightduty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of TNEB meter Board suitable for 32 A Three phase service connection with 32A fuse unit(500V)32A neutral link and earth link (1" x 1/8" Copper flat) on T.W plank of size 600mm x450mm x 19mm with supportingT.W.reepers of 1" thick on either sider with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVCinsulated copper wire from EBmeter to fuse unit.

Supplying and Fixing of PVC mould CI Steps for Sump -Including all Labour Charges etc

Supplying and Fixing SFRC Manhole Cover 60 x 60cm (Heavy Duty) with Frame Including all Labour Charges etc

Vertical multistage Pump 5.5KW /7.5HP 2900 RPM / IE3 Motor + IP55 Multiple VFD (DANFOSS/iNVT/FUJI) panel + Suction and Delivery Manifold (SS) + 200 ltrs MS Pressure tank (10 bar) 5 LPS @ 60 m head 2W+2S Model-SVM 15-06

Supplying and fixing 63 A TPNMC switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and run off 2 of 4sqmm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark confirming to IS:694/1990 with continuous earth connection by means of 1.50 sqmm PVC insulated single core unsheathed copper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labor etc., complete in all respects as directed by the departmental officers.

Supplying and run off 2 of 4 sqwmm (56/0.3) PVC insulated SC unsheathed cu.conductor of 1100 V grade on 7/20 GI bearer wire service connection mains

Supply and run of 2 of 4 sqmm (56/0.30) PVC insulated SC unsheathed cu.conductor of 1100 V grade in 25mm Dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for main.

Supplying and fixing of 3 nos. of 100A porcelain fuse units 500 Volt of approved brand having ISI mark in T.W Board of suitable size etc., completed. PWD SOR Page no 220

Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection with 1.5 sqmm PVC unsheathed Cu. cable and making good of the concealed portion, with suitable color for concealed power plug point.

Supply and fixing of 32A fuse units on suitable TW board with necessary internal connections for controlling the power plug Including cost of materials, loading and unloading charges etc., Complete.

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessary PVC shoe, PVC 110mm Dia bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of “U” clamp at the center of the pipe line in addition to those for more than 3.0 meter pipe length, etc., complete complying with standard specification and as directed by the departmental officers

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black color) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from unplasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Pre-Painted Galvanized Iron Three Track Sliding Windows: Providing and fixing pre-painted three track, three panel sliding system fabricated from roll formed sections made of galvanized steel color coated (Base steel as per IS513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams / sqm.) with total coated thickness of 0.58mm.Paint specification: Coated sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns.Dimensions of sections: Section for outer frame three track should be of 92mm x 44mm, section for shutter should be of 35mm x 49mm for window, section for euro groove should be of 25mm x 24mm and for lap strip should be 30mm x 41mm.Fixing details: The frame and shutter sections should be cut to length, joined with corner brackets made of glass filled nylon. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass. Accessories: Corner brackets made of glass filled nylon. Gasket made of Ethyl Propylene Diamine Monomer (EPDM). windows. Single wheel rollers for windows should be provided. Glass: Glass shutter and fixed glass portion should be provided with a glass of 4mm pinhead glass. Window frame should be fixed to brick / concrete masonry by using nylon self-expanding caps and driving MS electro plated 80mm long screws into the caps through frames.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing Mild Steel Door ,grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers.

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc (Gear Operated Type (from 8 sqm. to 12 sqm. Area)

Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc., complete as per standard specification and as directed by the Departmental Officers.

Supply and delivery of First Aid Box complete with all First Aid Medicines all Including all charges etc., complete

Supply and delivery 4 Nos of Fire Buckets made out of 40x40x6mm MS Angle Including all charges etc., complete

Supply and fixing of Water CO2 Stored Pressure Type 4.5Kg capacity Fire Extinguisher as per new IS 15683 complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, wall mounting bracket, safety clip, etc., as directed by the Departmental Officers.M-1982.Page no :251

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

Refilling with excavated soil (other than sand) complying with the standard specification for filling in foundation and basement

Pre Fabricated PUF panel for Ticket Kiosks and Staff Rooms of 27'(L) x 13'(W) x 9'(H)

Street Furniture I:Constructed using a high-quality mild steel (MS) tube frame, duly galvanized for superior rust resistance and finished with polyester powder coating to ensure long-lasting durability and an attractive finish. The roofing is made from premium-grade polycarbonate sheet, providing excellent weather resistance, UV protection, and light transmission while maintaining structural strength.

Street Furniture II:Constructed with MS sheet and WPC wood, duly galvanized and finished with polyester powder coating for durability and weather resistance. Designed with an integrated planter box for a modern and functional outdoor seating solution.

Constructed with 3 bins made from mild steel (MS) sheet, duly galvanized for enhanced corrosion resistance and finished with polyester powder coating for long-lasting durability and aesthetics. Designed with a front-open mechanism for easy access and maintenance

Supply and Installation of Directional Signage Pylon Display Double Sideas per the Requirement (4*2)

Supply and Installation of Signage Descriptive Pylon Display Double Sideas per the Requirement as per the given Requirements(Size 4*3)

Supply and Installation of Signage Wayfinding Pylon Display Double Sideas per the Requirement (2*2)

Supply and Installation of Signage Advertisement Pylon Display Double Sideas per the Requirement (2*2)

TransPortation,Debrish Removal, Loading and Unloading of Materials during Signage installation

Under Ground piping - Supply and Erection of MS black ERW pipes conforming to IS 3589/1239 with coupling / welded joints including cutting the pipes to correct length, providing and welding flanges to pipe, fixing with clamps to MS brackets/ hangers, making flanged joints with necessary nuts, bolts, gaskets,. blank flanges, etc. Rate shall include cost for Excavation & Back filling (heavy class for up to 150 mm ) (Make: TATA & Jindal - Class – C) a)100 NB

For above Ground pipe: Supply of MS black ERW pipe confirming to IS specification 3589/1239 including cutting, coupling / welding MS flanges fixing in pump room and wherever necessary nuts, bolts, gaskets. Rates inclusive of heavy class fittings, steel suppots with painting, anchor bolts, hitec supports, clamping etc (6 mm thick 200 NB & above, Heavy class for upto 150 mm ) (Make: TATA & Jindal - Class – C) a) 100 NB

SITC of Butterfly Valve ISI Marking Butterfly Valve made up of cast iron Grade: 260 to IS:210 body IS-210 Gr.FG-200. The disc shall be Stainless steel (SS 304 / CF8). The valve seat shall be of high-grade EPDM. The valves shall be PN 16 rating. a)100 NB

Supply and Erection of wrapping 4mm thick with Coating & Wrapping Materials for underground MS Pipes (Make: IWL)

Supply and Erection of External open space SS Double headed fire hydrants as per IS:1548 consisting of 2X63mm dia. Double outlet flanged oblique type hydrants valve with female plunger type coupling, chained blank cap including making flanged joints by providing necessary nuts, bolts, Neoprene gaskets all complete including ductile iron double flanged 100 mm dia stand post (Make: Shah Bhogilal, Newage)

Supply and Erection of RRL hose – Type – A of 63mm dia. x 15 meters (as per IS 8423) long with heavy quality gun metal male coupling of IS :903. including short stainless steel branch pipe Fire AXE complete (2 nos. hoses and one No. branch pipe and one Big AXE will form one set ) (Make: Newage / Shah bhogilal)

Supply and Erection MS Hose box material of size 900 x 600 x 250 with FRP aoted, glass fronted door, painted in red out side and white in inside, hose boxes along with MS support angles for courtyard hydrants. Each box shall be capable to accommodate 2 hose each of 63 mm dia x 15 m long hose pipe, nozzle, branch pipe etc

Construction of valve chamber with lockable cover made up of FRP - Heavy duty with brick masonery chamber and other required all civil works including earth work, PCC floor, Brick wall and top cover all necessary works Size - 600 x 600mm

Tapping - connection @ DWS pipie line in all outlet area with propoer tapping saddle piece with RCC pedastal and clamp works in all respects to avoide the damages in UG pipe main line

Supply and Erection of Siamese inlet (Fire Brigade inlet) connection with provision for Four male instantaneous type for fire fighting system including making connection by providing necessary fittings to the fire storage tank and system. a) Connection to Fire External Yard Hydrant System

Supply and Erection of MS sheet 10 gauge drum type wall mounting Hydrolix connection hose reels, swiveling 180o consisting of 19 mm dia. x 30 meters long armored rubber hose pipe with 15 mm dia.PVC shut of type jet nozzle on the outlet including making connection to the wet riser, by drilling welding, fixing the hose reel to the wall by providing necessary anchor fasteners/ expansion bolts, grouting the same with cement mortar, painting all complete as per drawings, specifications. (Make : SRI) - Considered for STP & electrical room area with one isolation valves

Preparing and submission of all drawings and documents for the purpose of obtaining NOC from DFRC service and Local Authority as applicable,arranging for inspection by DFRC / Local Authority as applicable and obtaining of Fire and Rescue services Licence / Completion certification from DFRC / Fire Authority including all non statutory liaison and follow up charges. Statutory payments shall be reimbursed by client upon production of receipts, challans, demand notice, etc.

Supply and Erection of 'A3 Paper Size Board etc complete. complying with standard specification and as directed by the Department officers. The quality and make of Board should be got approved by Concern department Engineer before use on work.

'Supply and Erection of A2 Paper Size Board etc complete. complying with standard specification and as directed by the Department officers. The quality and make of Board should be got approved by Concern department Engineer before use on work.

Supplying and fixing of CP Two Way Bib Cock with Health Faucet ,wall hook & one metre long flexible tube including cutting and making good the walls wherever required etc complete. complying with standard specification and as directed by the Department officers. The quality and make of health faucet should be got approved by Concern department Engineer before use on work.

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing in position best quality approved make white glazed earthernwere sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works]

Supplying, laying and jointing CPVC pipes SDR 11(having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. Internal & Vertical

32 mm Dia

40 mm Dia

25 mm Dia Upvc Pipe

32 mm Dia Upvc Pipe

40 mm Dia Upvc Pipe

50 mm Dia Upvc Pipe

65 mm Dia Upvc Pipe

80 mm Dia Upvc Pipe

100 mm Dia Upvc Pipe

Supplying & fixing in position 15 mm dia brass/ C.P screw down tape (Heavy duty) of approved make conforming to I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work).(Garden)

C.P Tap

25mm Hex NIPPLE

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

25 mm Dia

32 mm Dia

40 mm Dia

50 mm Dia

65 mm Dia

80 mm Dia

100 mm Dia

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works).

110mm Dia

75mm Dia

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

50mm dia

40mm dia

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position best quality External PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works).

200mm Dia

160mm Dia

110mm Dia

75mm Dia

Supplying and fixing Ductile Iron manhole cover with frame as per approved make ,cover weight and being size mentioned below and specified size in the drawing etc., including painting with two coats of anticorrosive paint over a coat of primer etc., fixing locking arrangements, fixing Man-hole over, grouting the anchors with CC 1:2:4 (one cement,two fine aggregate and four coarse aggregate), as complete in all respects complying with relevant standard specifications and as directed by the Client / Engineer-in-charge.(UG Sump manhole Cover)

Fabricating and fixing of Puddle flanges in water tanks with making in D.I (the puddle flanges should be got approved by the Executive Engineer before use on works) The rate including cost of all materials, Fixing charges, Labour charges and Transportation charges etc., complete with standard specification and as directed by the departmental engineer-in-charge.

100mm DI Puddle Flange

80mm DI Puddle Flange

Supply and fixing of Packaged Sewage Treatment Plant of 100 KLD

SupSupply and fixing of Civil Cost Sewage Treatment Plant of 100 KLD

Supply and fixing of Water supply Excavation and filling

Supply and fixing of Sewage pipe Excavation and filling

Supply and fixing of Toilet paper holder

Supply and fixing of Tissue dispeser

Supply and fixing of Soap liquid dispenser wall mounted manual

Supply, installation testing and commissioning of 11 KV, 25 KA, 630 A, HT Outdoor Three Panel Ring Main Gear complete as per TANGEDCO specification including all civil work as required.

Supply, Erection Testing, Commissioning of 11 KV 300Sqmm XLPE(E) cable for TANGEDCO external pole to RMU in the entrance including excavation, brick/ Tuff protection, Earth filling etc as per the site condition.

Supply, End termination of 11 KV 300Sqmm XLPE(E) cable with heat shrinkable indoor kit with necessary lugs, tape and sundries items as required.

Supply, End termination of 11 KV 300Sqmm XLPE(E) cable with heat shrinkable outdoor kit with necessary lugs, tape and sundries items as required.

Supply, fabrication, of GI /Copper earth flat of following size in provided trench, clamping in wall, ceiling, with suitable Clamps/ saddles, connecting the joints through bracing / welding covering with termination in the earth pits, Panels, Distribution boards and equipment's with bitumen paint including accessories wooden plugs, screws, fastener etc., all inclusive a) Supply and run of 50mm x 6mm GI flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply, installation testing and commissioning of 11 KV, 25 KA, 630 A, HT Outdoor single panel Vacuum circuit breaker as per TANGEDCO specification including all civil work as required. - Consumer side

Supply and laying of 11 KV grade(E), 3 core x 300 sq.mm, stranded, aluminium conductor, extruded semi-con compound screen, extruded XLPE insulated, extruded semi-con compounded with a layer of nonmagnetic metallic tape for insulation screen, extruded PVC (type ST-2) inner sheath, galvanized steel strips wire armoured (for twin & multicore cables), extruded PVC (Type ST-2) FRLS outer sheathed, conforming to IS 7098 (Part-ll) II (with latest amendments) suitable for earthed system. The cable shall bear ISI certification mark. Including laying of the cable in existing trench cable tray/wall / excavated trench including transportation to site, after laying the cable in good condition with supply of all necessary materials such as brackets, clamps, MS spacers complete as required and as directed .

Supply and termination of cable end termination for following grade XLPE, insulated, shielded, armoured, aluminium conductor cable of following size using heat shrink type Indoor / Outdoor cable end termination with crimping type lugs, consumables accessories etc., all inclusive.

3C x300 Sq.mm Indoor termination

3C x300 Sq.mm Outdoor termination

Supply, erection, testing, commissioning of 11KV/433 V , 630KVA Copper Wound ,Outdoor Oil Cooled Transformer with Onload Tap changer (OLTC) confirming to IS 1180-Level 1 efficiency level Copper Wound, DELTA/STAR (DYn11) with all the accessories, equipment as per the detailed specification. RTCC panel shall be provided at each Transformer along with Transformer Buchholz relay, Neutral CT for restricted earth fault relay, winding temp relay, Auxiliary relays as per standards. The transformer shall be provided with cable termination box on incomer side to terminate - 11 KV 3 core 300 Sqmm XLPE (E) cable and suitable for LT side 3.5C x 300 sq.mm cable with termination box as Outgoing side and all as per the specification. The rate shall inclusive of extension of copper bus bar, Transport, Insurance up to the site etc., and also shall be included all necessary control cables as required and standard Technical specification. Rate shall inclusive of factory witness test as specified in the technical specification

Design, Supply, Installation, Testing & Commissioning at site 3-phase, 415V, 1500RPM, 50 HZ, Diesel generator set 400 KVA Prime Rating at 0.8 pf lagging diesel engine with Radiator (with standby fan provision) and alternator set mounted on common base frame in Outdoor Type Acoustically Treated Enclosure, day tank capacity of 1 x 990 liters, battery, battery charger, return fuel colour, anti vibration mounting pads including residential silencer, engine alternator safeties with accessories, engine control panel, ventilation system, inside canopy lighting, etc. as per specification complete as required. Diesel engine shall conform to IS:10000 and alternator shall be self excited complete with AVR confirming to IS:4722. MCC panels for Radiator motors to be considered in the scope if required.

Supply and Laying of 3 1/2 x 300 sq.mm. PVC armoured LTUG cable in in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and laying of 31/2 core 300 Sq.mm PVC armoured LTUG cable in the provided cable tray with necessary cable clamp, screws etc.,

Supply & erection of 32mm dia 2.0 meter long, GI Class B GI pipe buried in ground as per IS with necessary connecting clamps, watering arrangement &fasteners etc. The pit shall be filled with alternate layers of salt &charcoal. The rates shall include excavation of the pit, construction of masonry chamber, providing heavy duty concrete cast slab, painting & making etc.,& as per the technical specification.

Supply & erection of Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funnelling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply, fabrication, of GI /Copper earth flat of following size in provided trench, clamping in wall, ceiling, with suitable Clamps/ saddles, connecting the joints through bracing / welding covering with termination in the earth pits, Panels, Distribution boards and equipment's with bitumen paint including accessories wooden plugs, screws, fastener etc., all inclusive

50X6mm Copper flat

50X6mm GI flat

25X3mm GI flat

No.8SWG copper wire

Supply, installation, Testing & Commissioning of Cable Route markers made of galvanized CI circular 100 mm. dia. with "HT CABLE" markers on same by 30 mm. size letter. The cable marked shall be firmly installed with 450 mm anchoring below ground level.

Design, manufacture, supply, erection, testing and commissioning of 415 V Power feeder pillar panel suitable for outdoor installation, made up of CRCA sheet steel of thickness not less than 2 mm with a weather proof canopy of top, double door construction, IP 54 protection, anti corrosive chemical resistant paint with 1no. 400 A TPN MCCB with 16 kA breaking capacity in the incoming and 205A TPN MCCB - 2 nos, 125A TPN MCCB - 4 nos, 63 A TPN MCCB - 6 nos. as outgoing, and adequate plate to terminate suitable cable as incomer and suitable cable as outgoing. energy saver for automatic switching ON/OFF as per pre-sets time cycle, digital multifunctional meter with RS485 port and suitable CT etc., including 3.5 c x 240 sq.mm. cable as outgoing with required accessories as required, including concrete pedestal and associated civil works.

Design, manufacture, testing and inspection at places of manufacturer, and supplying delivery at site, unloading, storing, transporting directly to site or through transit stores as the case may be, laying inclusive of excavation in all types of soil reinstatement and making good the surface to match original, removal of surplus earth including supplying and laying / installation of screened sand, cable protective bricks and cable tags of the following 1.1 KV grade XLPE insulated aluminium conductor armoured UG cables.

4C x 16Sqmm AYFY

3½ x 35 Sq.mm. AYFY

3½ x 50 Sq.mm. AYFY

3½ x 70 Sq.mm. AYFY

3½ x 95 Sq.mm. AYFY

3½ x 185 Sq.mm. AYFY

3½ x 240 Sq.mm. AYFY

3½ x 300 Sq.mm. AYFY

Supply and fixing of brass cable gland for FOLLOWING SIZES FOR XLPE / PVC armoured LTUG cable with earth connection

4C x 16Sqmm AYFY

3½ x 35 Sq.mm. AYFY

3½ x 50 Sq.mm. AYFY

3½ x 70 Sq.mm. AYFY

3½ x 95 Sq.mm. AYFY

3½ x 185 Sq.mm. AYFY

3½ x 240 Sq.mm. AYFY

3½ x 300 Sq.mm. AYFY

Supply and providing cable end termination of following XLPE / PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

4C x 16Sqmm AYFY

3½ x 35 Sq.mm. AYFY

3½ x 50 Sq.mm. AYFY

3½ x 70 Sq.mm. AYFY

3½ x 95 Sq.mm. AYFY

3½ x 185 Sq.mm. AYFY

3½ x 240 Sq.mm. AYFY

3½ x 300 Sq.mm. AYFY

Supply and fixing of GI Hot Dip 16 SWG Ladder type Cable Tray with 600mm width and 50mm height

Supplying and fabricating of MS structural steel supports for various applications using U channels, MS angle iron, bolts, nuts, anchor bolts etc., required for the work, cut to the size, bent to shape, welding, grouting etc., complete. Supports shall be powder coated with required colour for different system as mentioned above.

Supply, installation, testing & commissioning of 300 mm dia. NP3 hume pipe, across the road wherever cables are crossing the roads. All civil works required such as excavation in all types of soils, rocks, bitumen road, WBM layers, reinstatement and making good the surface to match original, removal and disposal of surplus earth etc. are included.

Supply, installation, Testing & Commissioning of Cable Route markers made of galvanized CI circular 100 mm. dia. with "LT CABLE" markers on same by 30 mm. size letter. The cable marked shall be firmly installed with 450 mm anchoring below ground level.

2m x 1m Rubber Mat suitable for 11 KV installation 5 sets confirming to IS

Co2 type fire extinguishers complete with hose and fixing brackets etc. of the following capacities confirming to lS:2878- 4.5 KG capacity.

Supply and fixing of Caution label

Cost of External connectivity from TANGEDCO

Design, manufacture, supply, erection, testing and commissioning of 415 V street lighting feeder pillar panel suitable for outdoor installation, made up of CRCA sheet steel of thickness not less than 2 mm with a weather proof canopy of top, double door construction, IP 54 protection, anti corrosive chemical resistant paint with 1no. 125 A TPN MCCB with 16 kA breaking capacity in the incoming and 8 nos 63 A TPN contactor , 10 nos. 63 A TPN MCCB, as outgoing, automatic dawn and dusk with cyclic timer control for street light outgoing and adequate plate to terminate suitable cable as incomer and suitable cable as outgoing. energy saver for automatic switching ON/OFF as per pre-sets time cycle, digital multifunctional meter with RS485 port and suitable CT etc., including 3.5 c x 240 sq.mm. cable as outgoing. 24 Hrs. timer for automatic switching ON/OFF as per pre-sets time cycle including concrete pedestal and associated civil works.

Design, manufacture, testing and inspection at places of manufacturer, painting, with anti corrosive chemical resistant paint as per IS:157 of approved brand and supplying, delivery at site, installation, final painting, testing and commissioning of octagonal street lighting poles suitable for mounting 1 no. street light fixture with total height of 8.0 Mtr. along with base plate, single arm bracket & GI pipe sleeves for cable protection, earthing terminals, complete with painting. All civil works required such as excavation, concrete foundation, coping, removal of surplus earth etc.,

Design, manufacture, testing and inspection at places of manufacturer, painting, with anti corrosive chemical resistant paint as per IS:157 of approved brand and supplying, delivery at site, installation, final painting, testing and commissioning of octagonal street lighting poles suitable for mounting 2 no. street light fixture with total height of 8.0 Mtr. along with base plate, single arm bracket & GI pipe sleeves for cable protection, earthing terminals, complete with painting. All civil works required such as excavation, concrete foundation, coping, removal of surplus earth etc.,

Design, manufacture, testing and inspection at places of manufacturer, painting, with anti corrosive chemical resistant paint as per IS:157 2meter long post top lantern - Type 1

Design, manufacture, testing and inspection at places of manufacturer, painting, with anti corrosive chemical resistant paint as per IS:157 2meter long post top lantern - Type 2

Design, manufacture, testing and inspection at places of manufacturer, and supplying, delivery at site, unloading, storing, transporting directly to site or through transit stores as the case may be, installation, final painting, testing and commissioning of focus light with 100W LED with control gear and 100 W LED lamps suitable for outdoor operation with IP66 protection'

Design, manufacture, testing and inspection at places of manufacturer, painting and supplying, delivery at site, installation, final painting, testing and commissioning of outdoor weather proof junction boxes with 10 A 1P MCB per fixture and terminals for terminating two cables. Junction box will be suitable for looping in and out one incoming and 2 out going cables on strategic locations wherever required.

Design, manufacture, testing and inspection at places of manufacturer, and supplying, delivery at site, unloading, storing, transporting directly to site or through transit stores as the case may be, installation, final painting, testing and commissioning of street lighting fixtures suitable for 120 W with control gear and 120 W LED lamps

Design, manufacture, testing and inspection at places of manufacturer, and supplying, delivery at site, unloading, storing, transporting directly to site or through transit stores as the case may be, installation, final painting, testing and commissioning of Decorative Compound wall light 40 W LED lamps

Design, manufacture, testing and inspection at places of manufacturer, and supplying delivery at site, unloading, storing, transporting directly to site or through transit stores as the case may be, laying inclusive of excavation in all types of soil reinstatement and making good the surface to match original, removal of surplus earth including supplying and laying / installation of screened sand, cable protective bricks and cable tags of the following 1.1 KV grade XLPE insulated aluminium conductor armoured cables.

3½ x 185 Sq.mm. AYFY

3½ x 35 Sq.mm. AYFY

4C x 16Sqmm AYFY

Supply, installation. Testing & Commissioning of brass cable gland for PVC LTUG armoured cable with earth connection etc. for following sizes of cables

3½ x 185 Sq.mm. AYFY

3½ x 35 Sq.mm. AYFY

4C x 16Sqmm AYFY

Supply and providing cable end termination for following size PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete

3½ x 185 Sq.mm. AYFY

3½ x 35 Sq.mm. AYFY

4C x 16Sqmm AYFY

Supply, Installation, Testing & Commissioning, of epoxy resin cast straight through joint of 3½ x 185 Sq.mm. AYFY of XLPE insulated, PVC sheathed, PVC overall insulated aluminium conductor, armoured cable.

Supply, erection, testing and commissioning of High Mast Light system confirming to IS 875, 20 Mtr height with the following:- High Mast Light system confirming to IS 875, 20 Mtr height with Hot dip galvanized complete with all accessories including head frame, pulley assembly, 3/4 point suspension system with steel wire rope, double drum winch, Galvanised Lantern carriage arrangement suitable for connecting upto 8 nos. of 150 Watts LED lights fittings, connecting cable with accessories, lightning arrestor, aviation obstruction light, integral power tool, earth pits, foundation bolts and accessories. 8 Nos. 150 Watts LED flood light fitting with control gear confirming to relevant IS code including all accessories, internal wiring, LED lights etc.,Control panel housing suitable circuit for the operation of the high mast including integral power tool operation, adequate size of interconnecting cable, power and control cables, termination etc., earthing , and safety equipments.,Design, supply, erection of suitable foundation for the high mast considering the site soil condition etc., all inclusive. Including all type of civil works.

Supply, Installation, Testing and Commissioning of Earthing station consisting of GI Pipe earth electrode, with suitable chemical back filling compound, brick masonry work for chamber 300 x 300 mm. CI cover, watering pipe, funnel and earthing conductor as per IS:3043. All civil works required such as excavation in all types of soils, rocks, PCC Earthing Chamber foundation, reinstatement and making good the surface to match original, removal of surplus earth etc. are included.

Supply, Installation, Testing & Commissioning of 25 x 6 mm. Size hot dip G.I. Earthing strip, for feeder pillar panel / metering panel earth stations and in between two lengths of strips are included. All civil works required such as excavation in all types of soils, rocks, reinstatement and making good the surface to match original, removal of surplus earth etc. are included.

Supplying and run off 8 SWG GI wire on walls or below ground level with necessary 'U' nails, earth work excavation and refilling & including the cost of all materials etc., complete in all respects as directed by the departmental officers.

Supply, installation of Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth

Supply, installation, testing & commissioning of 300 mm dia. hume pipe across the road wherever cables are crossing the roads. All civil works required such as excavation in all types of soils, rocks, bitumen road, WBM layers, reinstatement and making good the surface to match original, removal and disposal of surplus earth etc. are included.

Supply, installation, Testing & Commissioning of Cable Route markers made of galvanized CI circular 100 mm. dia. with "LT CABLE" markers on same by 30 mm. size letter. The cable marked shall be firmly installed with 450 mm anchoring below ground level.

Supply fixing and errection of CCTV Camara including cost and Conveyance of all materials to site etc complete as per Specification

CCTV Camera (Q)

Network Video Recorder (32 CHANNEL-2 SATA)

Hard disc for NVR 4TB Pg:155

24 Port Patch Panel

Rack With Accesssories -42 U RACK

Armoured LAN & CCTV Cable (CAT-6)

Led tv for display (Q) 42" LED TV

Supply and erection of 8m Free Standing Single Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hot dip galvanized confirming to BESN ISO-1461 with thickness of 65 Micron. The pols should mounted on the concrete pedestal with suitable bolt & nuts grounting on the concrete etc., complete.

Supply and fixing of IP65/IP66 60 Watt, W-LED luminaire, dispersed beam, soothing to eyes with the use of proper optics and diffuser with 220Wp under STC (220wp or 110*2=220Wp) (Either one number of module with 220Wp or two numbers of modules with 110Wp each should be installed for single light source.) The PV module should have crystalline silicon solar cells and must have a certificate of testing conforming to IEC 61215 Edition II / BIS 14286 from an NABL or IECQ accredited Laboratory. Indigenously manufactured PV module should be used. There should be a Name Plate fixed inside the module which will give: a. Name of the Manufacturer or Distinctive Logo. b. Model Number c. Serial Number d. Year of manufacture (Should not be older more than one year) Minimum 12.8V, 72 AH capacity, 3 days or Minimum 36 operating hours per permissible discharge with fully charged Lithium-Ferro Phosphate Battery. Battery should conform to the latest BIS/ International standards.

Supply and fixing of 6.8w LED/Solar Bollard Light Havinf following technical specifications. Mounting Type - Flange Colour Temperature - RGB + 3000K ~ 6000K Lumen (lm) - 400lm Efficiency (lm/w) - >120lm/w Light Source - LED CRI (%) - ≥80 Beam Angle - 120° Power Requirement - Solar Powered Battery - 36wH Lithium LifePo4 Charging Time ~6 Hours Operation Time - Dusk to dawn* Housing - Aluminium post with PC light head Lifespan - >40,000 hours Operation Temperature -10°C~+40°C Product Dimension (light) - Ø260 x 140mm Product Dimension (post) - Ø110 x 760mm Ø110 x 1200 Product Dimension - Ø110 x 900mm (above ground) Impact Rating (light head) - IK10 Weight - 3.7kg Protection Rating - IP65 Warranty - 2 Years

Supply and fixing of ARCHITECTURAL POST TOP POLE 6M height Single Arm Pole Made of steel pipe section of 102mm dia. Top Decorative Castore design bracket made in combination of steel pipe sections 60mm dia.(vertical), 42mm dia.(vertical & gradually bent ) & Gradually Bent 14mm dia. MS rods. Ms rods are bent in such a way that it connects between two edges of 42mm dia. pipe, thus forming a loop. Bracket has decorative middle flower of dia 140mm along with a casted rod- weight-2.65 kgs. Multiple cast iron components such as Large leaf 370 mm long - starting width 100mm and ending width 150mm & weight-3.75kgs.,small leaf 190mm long , starting width 40 mm and ending width 140mm. - weight-1.2kgs. are provided at different places for aesthetics. Entire bracket shall be made to get 770mm horizonal arm length & provide pleasing aesthetics. Decorative Base in Steel - Its design starting with dia 350mm for 228mm height, then tapers to 241mm, followed by a cylindrical section of 219mm dia., 490mm Height.

Supply and fixing of LIGHT21, 45W-55W, Power Module LED, 3000K, IP66, Suspended Upper frame with threaded coupling G3/4" for suspended mounting at the top,made of die cast aluminum using pressure die- casting process. in single piece.Bottom frame composed by a ring with Company /brand name engraved in the mold,made of die cast aluminum using pressure die-casting process. in single piece. Auxiliary and optical compartment can be accessed by opening the frames. Drop shaped screen in polymethylmethacrylate (PMMA), transparent. Shock resistance IK06 made in single piece by injection moulding process. Pure polyester powder coating in Customized Metallic Grey Colour. Silicone gasket between the upper and lower frames ensures IP Rating - IP 66. Height – 545mm,Diameter - 550mm,Weight - 8Kgs., Area Exposed to Wind(S) - 0.135m2 Power LED Module with Company /brand name printed on PCB with the metal core plate. LED chips of CREE/NICHIA/OSRAM/LUMILED make shall be used. Colour Rendering Index: Ra > 70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection (an additional surge protection device of 10kV also provided in-built the fixture). Optics with refractive lens in PMMA/PC . LED Lifetime >1,00,000hours. LM80 report from LED Manufacturer should be submitted. Safety test report as per IEC 60598/IS 10322 from UL/UL Authorised/3rd party NABL should be submitted. LM79 report also should be submitted from UL/UL Authorised/3rd party NABL Laboratory. BIS Certificate with manufacturer name same as brand proposed should be submitted. Sample should be submitted for approval from concerned engineer-in charge. Approved Makes - NERI/ DW WINDSOR/GHM

Supply and fixing of 3 Watts LED 12V AC/DC Operation garden spike light with IP 66 Aluminium die cast housing, Tempered glass face with follwing technical specifications. Colour Temperature (1CCT)- 3000K Lumen (lm) - 400lm Efficiency (lm/w) - >130lm/w Light Source - LED CRI (%) - ≥80 Beam Angle - 30° Power Requirement - 12V DC/AC Power Consumption - 3w Dimmable - No Housing - Diecast aluminium with toughened glass lens Lifespan- >40,000 hours Operation Temperature - 20°C~+45°C Product Dimension - Ø42 x 75mm Impact Rating - IK08 Weight - 450g Protection Rating - IP65 Warranty 3 Years

Supply, Instalaltion, testing and erectiopn of 25 kWp PV SOLAR MODULES POLYCRYSTALLINE TYPE - 550 Wp:- Design, Supply, Installation, Testing, Integration, EB grid connected I Synchronization and commissioning the total 550 kWp) Rooftop solar photovoltaic(SPV) power plant as per the technical specifications &conditions of the tender document Modules with efficiency more than 16.2 % for Polycrystalline, with positive tolerance only. Fill factor of the module shall not be less than 70%. Minimum module rating shall be 500 Wp at STC. Module capacity less than 500 watts shall not be accepted. The cells used for module making shall be free from all defects like micro-cracks edge chipping, breakages, printing defects, discoloration of top surface etc. The superstrate should be High transmittance ARC glass and should withstand70km/h for 20mm ice ball (hail), Low Iron glass with minimum thickness of 3.2 mm per international standards (IEC61215). The glass used shall have transmittance of above 90%. Back sheet used in the crystalline silicon based modules shall be of 3 layered structures. Outer layer of fluoropolymer, middle layer of Polyester (PET) based and Inner layer of fluoropolymer or UV resistant polymer. Back sheet with additional layer of Aluminium also will be considered.

GRID TIE STRING INVERTERS Design, Supply, Installation, Testing, Integration, EB grid connected I Synchronization and commissioning the total 25 kW proof top solar photo voltaic (SPV) power plant as per the technical specifications & conditions of the tender document. The Inverter shall also house MPPT (Maximum Power Point Tracker), an interface between Solar PV array &the Inverter. The power conditioning unit/inverter shall also be DG set interactive, if necessary. Inverter output shall be compatible with the grid frequency.

DC COMBINER BOX (ARRAY JUNCTION BOX) Design, Supply, Installation, Testing, Integration, EB grid connected /Synchronization at double bus bar panel located DG room and commissioning the 34 Nos 16,700.00 835.00 17,535.00 5,96, 190.00 total 25 kWp (Rooftop solar photo voltaic (SPV)power plant

DC DISTRIBUTION BOXES Design, Supply, Installation, Testing, Integration, EB grid connected /Synchronization and commissioning the total 25 kWp rooftop solar photo voltaic (SPV) power plant

AC DISTRIBUTION BOXES Design, Supply, Installation, Testing, Integration, EB grid connected /Synchronization and commissioning the total 567 kWp rooftop solar photo voltaic (SPV) power plant

MOUNTING STRUCTURE FOR SOLAR PANELS WITH MS HOT DIP GALVANIZED Providing, fabricating and fixing in position of structural (support structure for solar panels) with SS 304 for fixing of Solar Panels including cutting, welding, hoisting &including cost and conveyance of all materials, all taxes, labour charges for fabrication erection at site work for all heights etc., complete as directed by the Engineer-in-Charge for finished item of work Components: • Leg, Rafter, • Types of Purlin, • Bracing, • Pivot Channel, • Base Plate, • Support Plate-Rafter, • Support Plate-Leg, Description of Works • L-Connector-primary purlin, • Stiffener, • L-Connector-rafter, • Pin, • M8xL25 SS304 (Module Mounting), • M8 Flat Washer, • M8 Spring Washer, • M8 Nut, • M12xL30,

SUPPLY AND INSTALLATION GI CABLE TRAY Tray Type: Perforated Cable Tray, Cable Tray Coating: Galvanized Coating, Thickness: 3 mm, Side Rail Height: 50 mm - 200 mm Supply and Installation of different sizes of GI cable tray with cover with 1 coat primer and 2 coat of weather proof silver paint and junction boxes along with required angle supports, with coupler plates, Anchor bolts and nuts including cost and conveyance of all materials etc., complete and the tray should be fitted on the wall I Ceiling/Fencing poles etc complete.

Supply, Fixing of Earthing as per the ISI specification with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry and etc to complete to work

Design, Supply, Installation, Testing, Integration, EB grid connected I Synchronization and commissioning the total 567kWp rooftop solar photo voltaic (SPV) power plant as per the technical specifications & conditions of the tender document a. Data Acquisition System shall be provided for each of the solar PV plant b. Data Logging Provision for plant control and monitoring with time and date stamped system data logs for analysis connected with a suitable PC. Metering and Instrumentation for display of system parameters and status indication to be provided c. Solar irradiance: An integrating PyranometerI Solar cell based irradiation sensor (along with calibration certificate) to provided, with the sensor mounted in the panel of the array. Readout integrated with data logging system d. Temperature: Temperature probes for recording the Solar panel temperature and/or ambient temperature to be provided complete with readouts integrated with the data logging system e. The following parameters are accessible via the operating interface display in real time separately for solar power plant

Supply and laying of 3.5 x 25 sq.mm Al XLPE armoured LTUG cable in a roof /wall with necessary accessories to make good earth connection and etc to complete to work

Supply and laying of 4C x 10 sq.mm Al XLPE armoured LTUG cable in a roof /wall with necessary accessories to make good earth connection and etc to complete to work.

Supply, Fixing of brass cable gland & end termination for 3.5 x 25 sq.mm Al XLPE armoured LTUG cable with earth connection and etc. to complete to work.

SUPPLY AND FIXING OF MC4 CONNECTOR Specifications Mating Contacts: Copper, Tin plated, <0.5mo Resistance Rated Current: 30 A Rated Voltage: 1000V (TUV) 600V (UL) Ingress Protection: IP67 Temperature Range:-40°C to +85°C Safety: Class II, UL94-V0 Suitable Cable: 10, 12, 14 AWG [2.5, 4.0, 6.0mm2] Components 1. Female Insulated Connector Housing 2. Male Insulated Connector Housing 3. Housing Nut with internal rubber bushing/cable gland (seals wire entry) 4. Female Mating Contact 5. Male Mating Contact 6. Wire Crimp Area 7. Locking Tab 8. Locking Slot - Unlock Area (press to release)

Supply and fixing of PVC Conduits of 2 Inch with necessary accessories for the total 25 kWp (Rooftop solar photo voltaic (SPV) power plant

Supply and laying of following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

4 x 10 sqmm

3 1/2 x 50 sqmm

Supply and fixing of brass cable gland for following cablesq.mm. LTUG armoured cable with earth connection.

4 x 10 sqmm

3 1/2 x 50 sqmm

Supply and providing cable end termination for following cable sqmm PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

4 x 10 sqmm

3 1/2 x 50 sqmm

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB Isolator as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. The VTPN DB is mounted on angle iron frame on conrete pedestal etc., complete. as per standard specification

Supply fixing and errection of Organic Waste Convertor including cost and Conveyance of all materials to site etc complete as per Specification and asdirceted by TTDC Department officials

Supply and fixing Organic Waste Convertor (OWC)

Solid Waste management Facility (for collection and transport)

GST at 18%

Please Enable Macros to View BoQ information