Renovation of the office of Chairperson, Chandigarh Commission for Protection of Child Rights (CCPCR) Snehalaya, Maloya, Chandigarh. (IBM Scheme No. W2/2025/25339)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40mm nominal size derived from natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for

Suspended floors, roofs, landings, balconies and access platform

Edges of slabs and breaks in floors and walls

Under 20 cm wide

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Cold twisted bars

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and size in: plateform of tank

Cement mortar 1:4 (1 cement: 4 coarse sand

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforma, vanity counters, window sills, facias and simtar locations of required slae of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epory touch ups, including rubbing, curing moulding and polahing to edge to give high gloss fish etc, complete at all levels

Granite of any colour and shade

Area of slab upto 0.50 sqm

Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31(Size 300mm x 600mm) Make (Johnson )

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868 ) transparent or dyed to required colour or shade, withnecessary screws etc. complete

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by Engineer-in-charge:

Profile B

Fixing with adjustable lugs with split end tail to each jamb

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

12 mm cement plaster finished with a floating coat of neat cement of mix :

1:3 (1 cement: 3 fine sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :

New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/ltr

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead

Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm (floor)

Disposal of building rubbish / malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all liftsinvolved

Providing and fixing 8 mm dia C.P./S.S jet with flexible tube upto 1 meter long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in -charge

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete

Semi rigid pipe

32 mm dia

Providing and fixing soil, waste and vent pipes

100 mm dia

Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989

75 mm dia

Sand csst iron S&S as per IS: 1729

Providing and fixing plain bend of required degree.

100 mm dia

Sand cast iron S&S as per IS : 3989

Providing and fixing heel rest sanitary bend

100 mm dia

Sand cost iron S&S as per IS - 3989

Providing and fixing single equal plain junction of required degree:

Sand cast iron S&S as per IS-3989

Sand cast iron S&S as per IS-3989

Providing and fixing terminal guard :

Sand cast iron S&S as per IS - 3989

Sand cast iron S&S as per IS - 3989

Providing and fixing collar:

Sand cast iron S&S as per IS - 3989

Sand cast iron S&S as per IS - 3989

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:

100 mm inlet and 75 mm outlet

Sand Cast Iron S&S as per IS-1729

Providing and faxing G.1. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (EXPOSED)

25 mm dia nominal bore

Providing and fixing G.1. Pipes complete with G.1. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall:

15 mm dia nominal bore

20 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

25 mm nominal bore

20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:

25 mm dia nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions :

30 cm length

15 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)

20 mm dia nominal bore

25 mm dia nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. Brass extension nipple (size 15mm X 50mm) of approved make and quality as per direction of Engineer-in-charge.

Cutting holes up to 30x30 cm in walls including making good the same

With common burnt clay F.P.S. (non modular) brick

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours . (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.)

Providing and fixing white vitreous china flat back half stall urinal of size 420 x 395 x 635 mm with fittings, standard size C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: complete in all respect make as approved by EIC.

Providing and fixing of C.P. brass angle cock approved make jaquar continental / ceral ess ess jal/ hindware etc. or equivalent approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-charge.

Providing and fixing of C.P. brass Short body cock make jaquar continental / ceraless ess/jal/ hindware etc, or equivalent approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-charge.

Providing and fixing of C.P. brass Centre Hole Basin mixer of make jaquar continental/cera/ess ess/ jal hindware ete, as per approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-charge.

Providing and fixing of Towel Ring of apporved make jaquar continential/cera/ess ess/ jal/hindware etc. as per approved make in the same range of AOR complete in all respect and to the entire satisfication of the Enginner-in-charge

Providing and fixing of CP brass soap dish of approved Make jaquar continental cera ess ess/jal hindware etc. as per approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-charge.

Providing and fixing of CP brass Paper Holder of make jaquar continental/ cera/ ess ess/ jal/hindware etc. as per approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-charge

Providing and fixing of CP brass health faucet with CP flexible tube of 1.0 mtr of jaquar continental/ cera/ess ess/ jal/ hindware etc, as per approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-charge.

Providing and Fixing of C.P. brass Bottle Trap of 190 mm long with both connecting legs for WHB of make Jaquar continental ALD-769/cera/hindware/jal etc as per approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-charge.

Providing and fixing of Glass Shelf with C.P. Guard rail for WHB including clamps and screws etc comp. in all respect of app make as ACN- 1171 N as per approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-charge.

Providing and fixing looking mirror of superior glass 5mm thick (of approved quality) complete with PVC beeding pf 1/4" dia and thick hard board, fixed to wooden cleats and hook etc., complete at site and make as approved by EIC.

Providing and fixing of Oval Shape Counter fit washbasin with C.I.Bracket with waste pipe including painting & fitting of brackets complete in all respect.

Providing and fixing of two piece Wall Hung EWC complete with cistern , seat cover and Twin Flush Fitting of make Cera model CRUSE/ CAMPBELL ( Seat,Cistern, Seat Cover, Twin Flush Fitting ,Flush Bend) OR equivalent in the same range of AOR

Providing and fixing Toughen glass urnial partition complete in all respect make jaquar code no. JSE-CHR-810UF60H19X

AC Work

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

Supplying and fixing 5A to 32 A rating, 240/415 V, 10 KA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Single Pole and neutral

HI - WALL SPLIT SYSTEMS Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC C128 supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature). Inverter Type - Cooling only

2.0 TR with 5 Star BEE Rating

Providing & Fixing of Powder coated ready made heavy duty out door stand for Split out door as per site requirement to the entire satisfaction of Engineer- in Charge.

Providing & fixing of 3 core 2.5 sqmm flexible copper.Wire as per ISI specifications including connections etc. of approved Make Havell / finolex / Polycab / Ecko etc. complete in all respect

Providing and Fixing of PVC Rigid drain Pipe complete in all respects from indoor unit to Disposal Points as directed by the E.I.C. Size 3/4" including specials Diplast or Equalivent.

Providing and Fixing of 22 gauge soft copper piping of size 3/8” & 5/8” or as per original manufacturer of A/C size, for Liquid & Suction sides, between indoor & outdoor units with 6 mm thick nitrile rubber insulation & protective covering for exposed whether/chasing including cost of chasing brick wall/RCC wall & repairing to original condition. The rate per meter includes cost of 1 meter each of both 3/8” & 5/8” with insulation.

Providing and Fixing of Voltage Stabilizers with copper winding input range 170-280 volts nominal output 230 Volts+/-10% complete in all respect. Make: Deol, Jewel, V-Guard or Equivalent

5 KVA capcity

Please Enable Macros to View BoQ information