Construction of Sub Division and Section Office Building for Sub Division 2 ECHP 1 to the West of PCH 1 Building in ECHS area

Hiring dewatering pump using electric pump with engine including hire charges for dewatering pump, operator cost transporting and placing in position of pumps including all accessories like delivery hose, suction pipe, dismantling of the same after completion of work with all lead, lift, labour, consumables, T & P, etc., complete.

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 2m in sand, silt or other loose soil wet sand or silt not under water light black cotton soil sandy loam and ordinary soil including excavated earth SS-20B.

Providing PCC 1:4:8 using OP/PP cement with 40mm size machine crushed HBG metal including cost of all materials, labour, lead, lift, curing, etc. complete.

Providing Random Rubble masonry in C.M 1.5 for basement, rate including cost of all materials, labour, lead, lift, curing etc., complete.

Providing Brick work in CM 1:5 using fly ash bricks including cost of all materials, labours, lead, lift, curing, etc. complete.

Brick work in CM 1:5 using Class II bricks including cost of all materials, labours, lead, lift, curing, etc. complete.

Refilling with excavated soil other than sand complying with standard specification for filling in foundation and basement with watering and consolidation including cost of all materials, labours, lead, lift, etc. complete.

Providing shuttering for supporting the reinforced cement concrete surfaces rate including cost of all materials, labours, lead, lift, etc. complete.

Providing centering and shuttering for supporting the reinforced cement concrete surfaces rate including cost of all materials, labours, lead, lift, etc. complete.

Supplying & providing RTS rod including cutting, bending, tying & fixing in position as per specification including binding wires, cost of all other materials, labours, lead, lift, curing, etc. complete.

Providing RCC 1:1.5:3 using OP cement with 12mm to 20mm machine crushed HBG metal including cost of all materials, labours, lead, lift, shuttering, curing, etc. complete.

Providing and fixing steel door of required size with single leaf, frame using 30 x 30 x 5mm M.S.angle shutters with 30 x 20 x 3mm M.S.angle and flat 4 x 5mm for door sfiffner center portion 20 x 5mm for shutter stiffner horizontal and 16x5mm for door stiffner outer vertical and horizontal with 2mm thick M.S.Sheet both sides made with 2 no. tower bolt, 1 no. aldrop, 2 no. handles, 3 nos. hinges with cost of all materials lead lift etc., complete including two coats of approved quantity enamel paint over the priming coat of red oxide.

Plastering with C.M 1:5, 12 mm thick including cost of all materials, labours, lead, lift, curing, etc. complete.

Special ceiling Plastering with CM 1:3, 10mm thick for RCC work including cost of all materials, labour, lead, lift etc., complete.

Terrace flooring (weathering course) with one course of pressed tiles 200 x 200 x 20mm over CM 1:3, 20mm thick mixed with crude oil 10% by weight of cement and pointing with the same oiled mortar over a bed of 80mm thick concrete broken brick jelly 20mm size in pure slaked lime with required slope over RCC roof slab including cost of all materials, labours, lead, lift, , curing, etc. complete.

Supply and fixing floor tiles of required size in first quality design ceramic tiles of approved colours in CM 1:3, 20mm thick and pointing with white cement 0.4 Kg/Sqm including cost of tiles labour, lead, lift, etc., complete.

Providing dadooing wall with glazed tiles of approved make first quality printed design and colour of required size in CM 1:2, 10mm thick and pointing with white cement of 0.4 Kg. / Sqm. Including cost of materials labour, lead, lift, etc., complete.

Providing two coats with ready mixed plastic emulsion (exterior walls) of first class quality paint & approved colour over a priming coat, including cost of all materials, scaffolding charges, labours, lead, lift, curing, etc. complete

Providing two coats with ready mixed plastic emulsion (interior walls) of first class quality paint & approved colour including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete.

Supplying and fixing in position Indian Water Closet of size 580 x 440 mm, white glazed earthen ware of approved quality with "p" tap or "S" trap conforming to IS: 2556-Part XII with sand cushion and forming flooring around the closet using 40 mm broken brick jelly in lime concrete 1:2:5 (one part of lime, two parts of sand and five parts of brick jelly) 100 mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes by dismantling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage, etc. complete complying with standard specifications and as directed by the departmental officers. (The Water Closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing colour wash basin 550 x 400mm with all accessories such as cast iron brackets, 32 mm dia C.P waste coupling, rubber plug & chain, 32mm dia. B class G.I wasre pipe, 15mm dia. G.M wheel valve, 15mm dia nylon connection, 15mm dia. brass nipples, 15mm C.P pillar tap, etc. including cost of all materials, labours, lead, lift, curing, etc. complete.

Supplying and fixing of approved make 20mm Gun gate valve including cost of all materials, fixing charges etc., complete.

Supplying laying and jointing in position of 20mm and 15mm dia GI pipes ('B' Class) as instructed by the site Engineer rate including cost of all materials, labour, lead, lift etc., complete. a) 20mm GI pipe

b) 15mm GI pipe

Supplying and fixing 6Kg/cm2 PVC pipe of approved quality size of 110mm dia including cost of all specials, all other materials required, labour, lead, lift, etc., complete.

Supplying and fixing of PVC paneled door shutters hollow type 200 mm x 200 mm panel with 1 mm wall thickness for panels and styles and rails of suitable size with 2 mm wall thickness suitably reinforced using MS angle/ Flat including cost of necessary Aluminium Hinges and other Furniture fittings

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPD rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing of precast RCC jolly, rate including cost of all materials, labour, lead, lift curing etc., complete.