Tender for Construction of 11/22KV Control room sub-station Building at Bithal under Electrical Sub-Division HPSEBL Kumarsain.

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size

Centering and shuttering including strutting, propping etc. and removal of form for :

(a)Foundations, footings, bases of columns, etc. for mass concrete

(b) Columns pillars, posts and struts Square, rectangular, polygonal in plan.

(c) Beams, cantilever, lintel

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

(a)1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)

(b)Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)

(c) Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size in plinth protection above sand filling

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) :

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) sal wood

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc

Providing and fixing ply wood lying with butt jointing and nails. 6mm thick.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in

Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, as per directions of Engineer-in-charge:

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing 40x3 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts nuts and wooden plugs and embeding in cement concrete block 30x10x15 cm. 1:3:6 ( 1cement : 3 sand : 6 graded stone aggregate 20 mm nominal size )

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick work in single section, fixed with or top cover

Extra for providing mechanical device chain and crank operation for operating rolling shutters.

Providing and fixing ball bearing for rolling shutters.

15 mm cement plaster in single coat on the rough side of brick conc./ stone wall for interior plastering up to floor two level including arrises, internal rounded angles chamfers and/ or rounded angles not more than 80 mm in girth and finished even & smooth. Cement mortar 1:4 ( 1 cement:4 sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats over and including water thinnable priming coat with cement prime

Finishing walls with water proofing cement paint of required shade :tes New work (Two or more coats applied @ for external plaster arefor height upto3.28 ltr/10 sqm) over and including primingcoat of exterior primer applied @ 2.20kg/10sqm

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than275 gm/ m²

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complet

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

(a) coupler 110mm

(b) single tee with door

( c ) bend

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Providing and fixing 15 cm wide, 45 cm overall semi?circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) in plinth protection

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete

Providing and fixing bright finished hard drawn hooks and eyes 300MM

Providing and fixing door spring bright finished or/and black enamelled iron (Helical door spring 150mm)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and laying internal & external water supply and sanitary fittings

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complet

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Providing and fixing towel rail

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size in plinth protection above sand filling

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :

Centering and shuttering including strutting, propping etc. and removal of form for :

Flat surfaces such as soffits and suspended floors, roofs landing and the like Floors etc. up to 200 mm in thickness

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

15 mm cement plaster in single coat on the rough side of brick conc./ stone wall for interior plastering up to floor two level including arrises, internal rounded angles chamfers and/ or rounded angles not more than 80 mm in girth and finished even & smooth. Cement mortar 1:4 ( 1 cement:4 sand)

Cement conc. Flooring 1:2:4 laid in one layer finished with a floating coat of neat cement.40mm thick.

FENCING AND SHINGLES SPREADING WORK

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Supplying and fixing wovenplains G.I. wire fencing of mesh 50 mm to 150 mm to any type of standard rails, strainging bolts etc. including provision of binding wire etc. staples etc.

Add 60% premium on item No Serial NO 87 Total Amount in RS P in M99 Column in Rs P

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Providing and spreading shingles/20mm stone aggregate including antiweed treatment in two layers (bottem layer sand and top layer aggregate )

Electric wiring

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required GROUP C

Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. GROUP C

Wiring for light plug with 2x1.5 sq. mm PVC insulated, PVC insulated heat resistant flame retardant (HRFR) and low smoke core flexible copper conductor single core cable in recessed / suface steel conduit alongwith 1 No. 1.5 mm dia HRFRLS / PVC insulated single core copper conductor cable earthing as required.

Wiring for power plug with 2x4 sq. mm PVC insulated, PVC insulated heat resistant flame retardant (HRFR) and low smoke core flexible copper conductor single core cable in recessed / suface steel conduit alongwith 1 No. 1.5 mm dia HRFRLS / PVC insulated single core copper conductor cable earthing as required.

Wiring for sub-main wiring with following size of PVC insulated copper conductor single core cable in surface / recessed steel conduit: - Sub-main 2x2.5 Sq.mm

Supplying and fixing metal box of 180mm x 100mm x 60mm deep (Nominal size) on surface or recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 Amp. piano type switch, connections painting etc. as requiredfor fixing phnolic laminated sheet cover in front including painting etc. as required.

Supplying and fixing metal box of 180mm x 100mm x 60mm deep (Nominal size) on surface or recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 Amp. socket outlet and 15/16 Amp.piano type switch, connections painting etc. as requiredfor fixing phnolic laminated sheet cover in front including painting etc. as required.

Supplying and fixing ceiling rose on the existing juction box / wooden block including connections etc. as required

Supplying and fixing Ding-Dong / Electronic bell suitable for D.C. / A.C. single phase 230 volts complete as required.

Supplying and fixing of wall mounted metal boards for switch gear mounting of suitable size with permissible variation in size of plus minus 5mm welded frame work made of M.S. angle iron 50 mm x 50mm x 6 mm thick duly welded complete with 3 mm thick M.S. sheet fixed with hinges as open able front complete with locking arrangement including painting and bonding to the existing earth as required.

Suppling & fixing 6 amps. to 32 amps. Rating 10 KA breaking capacity 240 volts " C" curves miniature circuit brackers of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Supplying and fixing of 40 / 50 /63 Amp.rating 10 KA breaking capacity 240 volts "C" curves miniature circuit breaker of following pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole - Cat - A

Supplying and fixing following rating four pole (three phase & neutral) 415 volts residual current circuit breaker (RCCB) having a sensitivity in the existing MCB DB complete with connections testing and commissioning etc. as required.100 AMP. CAT - A.

Supplying and fixing of following way single pole and neutral sheet steel MCB distribution board 415 volts on surface or recessed with provission for 4 pole MCB / Isolators / RCCB / RCBO as outgoing complete with tinned copper bus bar neutral link earth bar dinbar detachable gland plate interconnections including painting earthing etc. as required. Double door - 8 way

Earthing with copper earth plate 600mmx600 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using charcoal and salt for G.I. or copper plate earth electrode.

Providing, installing, testing and commissioning of ceiling fan and regulator including wiring the down rod of standard length (Upto 30 cms.)with 16/0.20 mm.twin twisted flexible cotton braided copper cable including providing and fixing phenotic laminated sheet cover on the fan box and earthing etc as required. Ceiling Fan 1200 mm sweep Category - A

Providing and installtion of exhuast fan of following sizes in the existing opening including making the hole to suit the size of above fan making good the damages connections testing and commissioning etc. as required.Exhuast fan light duty (Domestic) 300 mm sweep

Providing and fixing following surface mounting T5 liminairs with powder coated CRCA sheet steel housing mirror optics reflector electonic ballast decorative end caps suitable for 28 watts FTL (T5) complete with all accessories connections testing and commissioning etc as required 1x28 watts - FTL(T5) Category A

Providing and installation of stationary storage type electric water heater geyser of various size by means of expansion board with nuts an dwashers including beading of expansion board in the wall providing and fixing of non return valve dead weigh safety valve two nos, C-R connection rods 18" long making good the damages electric connections safety valve connections testing & comissioning etc, as required.10 ltrs. capacity

PAWAN SINGH GOVT CONTRACTOR

UTRI HR Services Private Ltd